|
| 1 | Dismentling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, includingcover fillets and including scafolding at any height complete all as specified and directed by Enggineer-in-charge |
| 2 | S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. complete including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specifiedall as specifiedas per manufacturere\"s instructions and including scafolding at any height complete all as specified and directed by Enggineer-in-charge |
| 3 | M&L for 4mm thick non asbestos fibre cement building boards of make \"E\" board classic designer board (cascade or Occenic) of M/s Everest Industries Ltd of equivalent as approved fixed or laid/inserted to timber/GI/Aluminium frame work with complete all as specified and as directed |
| 4 | Fixing only for 4mm thick non asbestos fibre cement building boards of make \"E\" board classic designer board (cascade or Occenic) of M/s Everest Industries Ltd of equivalent as approved fixed or laid/inserted to timber/GI/Aluminium frame work with complete all as specified and as directed |
| 5 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as specified and directed. |
| 6 | S & F Rolled Mild Steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etcconfirming to Fe 410 - W (Gde E-250)quality-A, |
| 7 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings |
| 8 | M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour 0.50mm thick (total coated thickness), 550 Mpa minimum, yield strength. It shall be coated with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) having overall width and laid width as specified and shall be fixed using hot dip galvanized, self drilling and self tapping screws neoprene and EPDM washers. Penetrations and laps in sheet shall be sealed by using proper sealant profile. HDPE fillers shall be provided wherever required to close voids between sheets, sheet & fasteners etc. etccomplete all as directed |
| 9 | Supply and fixPre-painted 0.50mm thick plain, galvanised sheet in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with, 550 Mpa minimum, yield strength. It shall be coated with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) having overall width and laid width as specified and shall be fixed using hot dip galvanized, self drilling and self tapping screws neoprene and EPDM washers. Penetrations and laps in sheet shall be sealed by using proper sealant profile. HDPE fillers shall be provided wherever required to close voids between sheets, sheet & fasteners etc.complete all as specified and directed by Engg-In-charge. |
| 10 | Fixing only for 5.0 mm thick Rubber tiles with fabric backing or insert, plain coloured or marbled topping, matt or glossy, laid in floors with approved adhesive including taking out existing finishes. |
| 11 | S&F for Aluminium framed windows / doors any pattern, fixed/side hung/silding using powder coated alluminium sections, of approved make with or with out sash bars suitable for 4mm thick glazing including necessary jointed cleats, mortice lock, glazing all as specified Note-: glazing shall be measured and paid separatly |
| 12 | Taking down and Refixing the existing collapsible gate clear opeing, cleaning the all bars, top and bottom runners, fixing of holdfast and brackets, greasing and repair in all respect as requiredcomplete all as specified and as directed. |
| 13 | S&F for 10mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes, edge grinding polishing, approved film/selected film complete all as spd and directed by Engr-in-Charge. |
| 14 | S&F in repair aluminium extruded Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed |
| 15 | S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed |
| 16 | Taking down aluminium doors / windows shutters only and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new mortice lock (if reqd), new clips or lock (Shutter and Frame), new aluminium beads & cleats of existing make and also refixng the handles & mortice looks in existing postiion with and includig new screws including refixing the door shutters in same opening etc complete all as specified anddirected by Engineer-in-ChargeNote : If broken or unserviceable glass/aluminium wire mesh/floor spring is replaced same will be paid separately under relevant items. |
| 17 | S & F of Harrison/curtain rails, stainless steel, chromium plated with fixing SS brackets,SS stops, SS rollers etc allas specifed and as directed by Engr-in-Charge. (All materials shall be stainless steel). |
| 18 | Taking down cement plaster on brick or concrete surfaces on wall/ceilling/stone/block etc including racking out joint, hacking for key,scrubbing down with water etc all as specified and as directed |
| 19 | Demolition of brick work or stone/ boulder masonry/PCC block, built in cement mortar or cement lime mortar including all quoins, pillars etc. |
| 20 | M&L forBrickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 |
| 21 | M&L for rendering 10 mm thick in CM 1:6 over brick surfaces, finished even and smooth without using extra cement all as specified and as directed. |
| 22 | M & L applying two coats of OBD over a coat of primer Chalk whiting, on plastered surfaces, prepara-tory to distempering on newly plastered wall / ceilings surfaces all as specified and as directed. |
| 23 | M&L for preparing old painted surfaces by washing, rubbing down and stopping of distempered and painted surfaces and applying two coat of distemper oil emulsion on surfaces of walls including and scafolding at any height complete all as specified and directed by Enggineer-in-charge. |
| 24 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 25 | S&F for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular)each tile 400 x 400 mmin floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6 complete all as specified and directed by Enggineer-in-charge. |
| 26 | M&L for Glazed ceramic coloured in vertical surface 350x 250x 7 to 8 mm / 450X 350X 7to 8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering 10 mm thick in CM 1:4 on fair faces of brick or concrete surfaces ofwall as in backing of skirting and dado all as specified and as directed. |
| 27 | Demolition of Cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) including floor finishes |
| 28 | Material and labourfor 75 mm thick plain cement concrete 1:4:8 type D2, using 40 mm graded stoneaggregate as in sub base all as directed. |
| 29 | Demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floorsaprons etc. |
| 30 | M&L for 20 to 25 mm thick Rough dressed shahabad stone slab flooring, laid dry but jointed and pointed in cement mortar 1:3 including 15 mm thick screed bed in cement and sand mortar (1:6),etc complete all as specified and directedby Engineer-in-Charge. |
| 31 | M&L for 18 to 20mm thick granite (of any type ) work (table rubbed and polished ) in steps, jambs, pillars, window -cills, cooking platforms and like in cement (1:4) including pointing in wihte cement (1:2) using marble dust with admixture of pigment ot match with shade of granite including moulding or roundingof edges, machine polishing to edge to give high gloss finish complete all as specified. |
| 32 | M&L for 18 to 20mm thick Green Marble work (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including moulding or roundingof edges, machine polishing to edge to give high gloss finish complete all as specified. |
| 33 | M& L Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete |
| 34 | Taking down of chowkat with shutter without taking off shutters from the frame exceeding 1.5sqm each but not exceeding 4 sqm all as specified and as directed. |
| 35 | S&F forFiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge. |
| 36 | S&F for 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge. |
| 37 | S&F sheet glass ordinary quality 4.8 mm thickwith oil putty exceeding 0.5 sqm in each pane all as specified and as directed. |
| 38 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as specified and as directed. |
| 39 | S&F in repair butt hinge, mild steel 100mm long all as specified and as directed. |
| 40 | S&F aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy 300 mm long and fixed all as specified and as directed. |
| 41 | S&Fin repair Floor door stopper of aluminium alloy body double and tongue anodised with rubber shoe and fixed of size 150 mm all as specified and as directed. |
| 42 | Taking down carefully existing unserviceable bitumen felt (any number of layers) including plaster of any thickness, wire brushing and cleaning of the surface of roof terraces including flashing and junctions of parapets kerb wall, PCC fillets, benching etc and removing of the rubbish to a distance not exceeding 500 m from the building and depositing where complete all as specified and directed |
| 43 | M&L for rendering 10 mm thick in CM (1:4) on roof slab top finished even and fair without using extra cement complete all as specified. |
| 44 | Demolition of plain cement concrete(unreinforced) in ground floor including concrete at junctions of parapets and roof terraces, flashing kerbs walls, PCC fillets, benching coving of chajjah top/junctions etc complete all as specified |
| 45 | Material and labour for providing plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) for roof, kerb, or mud stops, rounded or chamfered on edges etc complete all as specified and as directed. |
| 46 | M&L for cleaning the newly plastered surfaces of concrete (roof etc) with wire brushes and applying water proofing treatment as under :- (i) Brushing surface with neat cement slurry at the rate of 3.00kg of cement per Sqm. (ii) Applying one coat of oil bound bituminous primer @ 0.25 kg/Sq. M(iii) Providing and laying 3mm thick APP modified water proofing membrane weighing not less than 3.5 Kg/Sqm reinforced with non woven polyester mat weighing not less than 160 gm/Sqm all as specified procured from any one of the approved manufactures(iv) Apply two coat of solar reflective bituminous aluminium paint @ 0.15 kg/Sqm per coat over membrane over non assesble roof surfaces complete all as per manufactures instructions and as directed. |
| 47 | S & F in repairvitreous china wash basin, white back, size 500 X 400 mm x 190 mm , errectingon existing CI brackets including taking down old one alll as specified and as directed. Note: If the mentioned size is not available in the market, the next immediate higher size shall be provided by the contractor. Make of Cera Code : S2040121 or other equvelent in approved make. |
| 48 | S&F in repair Table top wash hand basin size 515 x 415x 145 including approved taps, waste, chain, plug, brackets,necessary 32/40 mm brass chromium plated bottle traps with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed and cutting for bottle trap and pinning in ends of brackets or erecting stand.Make of Cera Code :S2020171 or others equvelent in approved make |
| 49 | S & F Vitreous Ware wash down water closet (Pedestal), white (EWC) and fixed in repairs including suitable size of PVC water closet seat cover excluding flush pipe and flushing cystren |
| 50 | S&F in repair 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet (flush pipe) ball valve, float and handle including brackets and taking down old one complete all as specified and as directed. Make of Cera Code : B1010110 SN or other equvelent in approved make. |
| 51 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long. Make of Cera or other equvelent in approved make. |
| 52 | S&F in repair Soap dish, vitreous China white of approximate size 160 x 160 x 90 mm. Make of Cera Code : F5013116 / F5015116CH or other equvelent in approved make. |
| 53 | S&F Towel Ring of stainless steeland including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms). Make of Cera Code :F5015105CH or other equvelent in approved make. |
| 54 | S&Fin repairs Towel Rail 600mm long of brass chromium platedD type with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed. |
| 55 | S&F Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed.Make of Cera Code :F5013110 or other equvelent in approved make. |
| 56 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified Make of Cera Code :F8030103 or other equivalent in approved make. |
| 57 | S/F in repairs stop valves / angle cock cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe 15mm (fancy type chromium plated).Make of Cera Code :F2002201 or other equvelent in approved make. |
| 58 | S&F in repairs 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed Make of CeraCode : F1015101 or other equvelent in approved make. |
| 59 | S&F in repairs 15mm dia Chromium plated fancy type long body Bib tap cast copper alloy with crutch or butterfly handles screwed down screwed for iron pipe fixed in repair all as spd & directed . Make of Cera Code : F1015151 or other equivalent in approved make. |
| 60 | S&F in repairs for SS grating doom 125 mm dia with waste hole or without hole . (Minimum weight 40gms) |
| 61 | Taking up or down steel tubing 15mm dia and connections, including cleaning for re- fixing or removal to store |
| 62 | Taking up or down steel tubing 20mm dia and connections, including cleaning for re- fixing or removal to store |
| 63 | S&F for 15mm dia tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floor |
| 64 | S&F for 20mm dia tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floor |
| 65 | Dismantling existing PVC water tanks of capacity exc 250 litres& n.exc 500 litres all asdirected and removed from site. NOTE:-Dismantled water tank shall become the contractors property as per Sch of credit. |
| 66 | Dismantling existing PVC water tanks of capacity exc 500 litres& n.exc 1000 litres all asdirected and removed from site. NOTE:-Dismantled water tank shall become the contractors property as per Sch of credit. |
| 67 | S&F 500 litres rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top)hoisted and fixed in position including brass gate valve crutch or butterfly handle and GI suitable nipple at outlet all as specified and directed . |
| 68 | S&F 1000 litres rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top)hoisted and fixed in position including brass gate valve crutch or butterfly handle and GI suitable nipple at outlet all as specified and directed. |
| 69 | S and F in repairs PVC float valve 20 mm dia high pressure, with polythene float and flynut complete, screwed for iron pipe ferrule |
| 70 | S&F for 32 / 40 mm suitable pvc flexible waste pipe for wash hand basin, kitchen sink and urinals pot |
| 71 | S&F PVC connections 15mm size with PTMT nuts of length 450mm |
| 72 | S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls including taking down old pipes. |
| 73 | S & F 110 mm bore PVC (SWR) bends of any radius. |
| 74 | S & F 110 mm bore PVC (SWR) branch piece single (Single `Y\") equal or unequal with access door. |
| 75 | S&F PVC (SWR) pipes single socketed,75mm dia inanylength with rubber ring joints, laid in trenches or in floors / walls including taking down old pipes. |
| 76 | S&F PVC (SWR)bendsany radius 75mm bore |
| 77 | S&F PVC (SWR) multi floor trap 75mm dia with grating including jointing with solvent cement |
| 78 | S&F PVC (SWR)floor trap 75mm dia with grating including jointing with solvent cement |
| 79 | S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement |
| 80 | S&F 5.5 mm thick Fancy type beveled edge mirror of selected quality glass and fixed to wooden plugs / aluminium brackets with chromium plated brass screws and cup washers all as specified and as directed |
| 81 | Taking down carefully copper/aluminum point wiring (light/fan/bell/socket, power point etc) complete , including fixture and fitting such as switches, ceilling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfases of walls, floors etc complete all as specified and directed Engineer-in-Charge. |
| 82 | M&L for point wiring complete on surface of wall (open) type with two runs of 1.5 sq mm for phase and neutral single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable drawn in and incl PVC Casing and capping ISI Marked with its accessories PVC boxes (upto 12 module suitble for Mylinc series of Legrand including white plates with frame upto 12 module of make suitable for Mylinc Series )for fixing switches/socket/regulators etc incl 1.5 sq mm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable as earth continuity conductor to common earth & connecting to earth dolly for the following, all as specified and directed.Note :1. Proper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black)2.All points are required to earthed upto fixtures i.e. Holders, Tube lights, Wall lights, ceiling lights, bulkhead lights, bldg security light etc |
| 83 | One light point /fan point controlled by switch5 Amp single pole one way |
| 84 | One 3 pin 5 Amp socket outlet on same board controlled by one, one way 5 Amp switch |
| 85 | One socket outlet 5/3 pin 5 Amp controlled by one switch on independent board |
| 86 | All as per Item No 2 (here-in-before) but with 2.5 Sqmm Copper conductor cable for Phase , Neutral and Earth for one 3 pin, 15 Amp socket outlet on independent board |
| 87 | S&F in replacement Modular Switch, 6 Amp, one way, one Module as per existing.etc complete all as specified and directedby Engineer-in-Charge |
| 88 | S&F in replacement Modular Switch, 16 Amp, one way, one Module as per existing. etc complete all as specified and directedby Engineer-in-Charge |
| 89 | S&F Modular Socket Outlet6 Amp,2/3 pin, combined two module etc complete all as specified and directedby Engineer-in-Charge. |
| 90 | S&F Modular Socket Outlet6 Amp / 16 Amp - 2/3 pin combined two module etc complete all as specified and directedby Engineer-in-Charge |
| 91 | Supply & fixing lamp holder (Angular/Straight), insulated body, with back plate for batten fitting etc complete all as specified and directedby Engineer-in-Charge |
| 92 | M&L ceiling rose 3 terminal / PVC / polycarbonate, isolated body etc complete all as specified and directed by Engineer-in-Charge |
| 93 | S & F in replacement double doorSheet metal enclosures factory made Vertical DBsConcealed in Wall 4 way TPN, 415 volts ,protection class IP-42, including 100 Amps MCCBs suitable for fixing of MCBs,etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. |
| 94 | S&F double door Sheet metal enclosures factory made DBs 4 way, (TPN DB\"s) 415 volts protection class IP-43, suitable for fixing MCBs, Isolators etc, confirming As per IEC 61439-3, Suitable for Flush Mounting and Surface Mounting, With 200 Amps rated copper Busbar, With Neutral bar, Earthbar and Cable lies for Cable management, Fully shrouded, Neutral bars, Prefitted masking sheet complete all as specified and as directed. |
| 95 | S & F in replacement double doorSheet metal enclosures factory made DBs SPN, 8 way ,240 volts ,protection class IP-42, suitable for fixing of MCBs, Isolators etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. |
| 96 | S & F in replacement double door Sheet metal enclosures factory made DBs4 way SPN, 240 volts ,protection class IP-42, suitable for fixing of MCBs, Isolators etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. |
| 97 | Supply & fix MCB, SP, AC, 240 Volts of 06 to 40 Amp capacity 16 KA, \"C\" series and making connections with suitable size of copper lugs etc complete all as specified and directedby Engineer-in-Charge |
| 98 | Supply & fix MCBs, SPN, AC, 240 volts of 40 Amps capacity 16 KA, \"C\" series and making connections with suitable size of copper lugs etc complete all as specified and directedby Engineer-in-Charge. |
| 99 | Supply and fixultra slim square profile LED lighting fixture with extruded Aluminium housing, environmental friendly, energy efficient ready to use packLED Tube light fitiing 40 Watt with LED light source 6500 K with uniform light output, with all accessories including its connection with and including 2 core sheathed copper conductor cableof size 0.5 Sqmm withcompletewith all accessories etc complete all as specified and directedby Engineer-in-Charge |
| 100 | Supply & fix 42 Watt LED Panel 2X2 environmental friendly, new generation,aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for armstrong/Grid ceiling, complete with separate electronic driver ceiling light 42 Watt with and including connecting up with & including twin core, twisted, flexible copper conductor cable of suitable size 230 Volt, 50 HZ etc complete all as specified and directedby Engineer-in-Charge |
| 101 | S&F sub main wiring with two single core PVCinsulated,unsheathed, FRLS stranded copper conductor cable 1.5 Sqmm with 1.5 Sqmm PVC insulated, unsheathed, FRLS stranded copper conductor cable as earth wire drawn throughand including PVC casing caping ISI Marked with its all necessary accessories and earth wire connected to common earth dolly etc complete all as specified and directedby Engineer-in-Charge Note :1. Proper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black)2. Two run of 1.5 Sqmm cable i.e for one run for phase, one run for neutral with one run of 1.5 Sqmm cable for earth and one run of PVC casing caping shall be measured as one unit |
| 102 | S&F sub main wiring with two single core PVCinsulated,unsheathed, FRLS stranded copper conductor cable 2.5 Sqmm with 2.5 Sqmm PVC insulated, unsheathed, FRLS stranded copper conductor cable as earth wire drawn throughand including PVC casing caping ISI Marked with its all necessary accessories and earth wire connected to common earth dolly etc complete all as specified and directedby Engineer-in-Charge Note :1. Proper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black)2. Two run of 2.5 Sqmm cable i.e for one run for phase, one run for neutral with one run of 2.5 Sqmm cable for earth and one run of PVC casing caping shall be measured as one unit |
| 103 | S&F sub main wiring with two single core PVCinsulated,unsheathed, FRLSH stranded copper conductor cable 4 Sqmm with 4 Sqmm PVC insulated, unsheathed, FRLSH stranded copper conductor cable as earth wire drawn throughand including PVC Casing and capping ISI Marked with its all necessary accessories and earth wire connected to common earth dolly etc complete all as specified and directedby Engineer-in-Charge .Note :1. Proper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black)2. Two run of 4 Sqmm cable i.e for one run for phase, one run for neutral with one run of 4 Sqmm cable for earth and one run of PVC Casing & caping shall be measured as one unit |
| 104 | Supply & fixwall mounted airfan 450 mm,110 Watt,1750 r/min, air dilivery 100 cum/minute complete all as specified and directedby Engineer-in-Charge. Make : Havells Airboll-HS or equivalent |
| 105 | M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground. Earth pit not less than 2.25 m depth and top edge of the earth plate not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of nuts, bolts& washer etc. Earth wire connected upto main earth point / DBs alongwith 15mm dia earth protection pipe from top edge of the earth plate to main earth point to be connected and 20mm dia watering pipe light grade with funnel and provn of PCC using cement concrete (1:2:4) mix type B1 using granded stone aggregate and RCC pit cover 50 mm thick precostRCC(1:2:4)mix type B1 duly reinforced with 8 mm dia of TMT bar @ 100 mm CIC,both way, lifting arrangement complete including all necessaryearth work etc complete all as specified and directedby Engineer-in-Charge |
