|
| 1 | M&L for preparation of surfaces and applying one coats of cement base paint on old treated surface of wall etc complete all as specified and directed. |
| 2 | M&L for preparation of old surfaces and applying one coats of oil bound distemperwith roller on old treated surface of wall etc complete all as specified and directed. |
| 3 | M&L for preparation to old decorated, plastered or unplastered surfaces of ceiling, by brooming down, scraping down smoke spots, moulds, mossand efflorescent salts etc. and applying one coat of white (lime) wash including cornices pilasters etc complete all as specified and as directed. |
| 4 | Taking down cement plastering at any description on brick or stone wall etcincluding rakingout joints hacking for key scrubbing down with water etc and removal of debries and depositing where directed. |
| 5 | M & L for rendering 15mm thick in 1:4 on fair faces of brick masonry or concrete surfaces of walls, chajja, fins facia etc in CM 1:4 mixed with liquid water proofing liquid (ISI marked) @ 200ml/bag of cement or as per manufacturer’s instructions upto 3 storie height, finished even & smooth without using extra cement complete all as specified. Note :- Supply only water proofing liquid shall be measured and paid separately under relevant items. |
| 6 | Supply only integral water proofing liquid complete all as specified and directed |
| 7 | M&L rendering 15 mm thick in CM 1:6 on brick masonry or concrete surfaces of walls finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge. |
| 8 | M & L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & fair without using extra cement complete all as specified and directed. |
| 9 | M&L for preparation of newly plastered surfaces and applying two coats of cement base paint complete all as specified and directed. |
| 10 | M&L for preparation of surfaces and applying two coats of oil bound distemperwith roller on newly plastered surfaces of wall etc complete all as specified and directed. |
| 11 | M&L for preparation of newly plastered surfaces of ceiling and applying two coat of white (lime) wash including cornices pilasters etc complete all as specified and as directed. |
| 12 | Material and labour for preparation of wall/ceiling surfaces and applying 1.5mm thick cement based external wall care putty on old or new plaster surface complete all as specified and directed. |
| 13 | M&L for preparation to old painted surfaces of wood or wood based material over 10cm width or girth of any description & applying one coat of synthetic enamel paint by mechanical means complete all as specified and as directed. |
| 14 | M&L for preparation to old painted surface of steel over 10cm width or girth of any description & applying one coat of synthetic enamel paint by mechanical means complete all as specified and as directed. |
| 15 | M & L for preparation of old surfaces by complete removal of existing treatment of painted walls incl pillar etc. by mechanical equipments like electric wall sander/water jet machine and applying cement based putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two coat of distemper with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of alkali resistant primer complete, by mechanical means as per manufacturer\"s specification all as specified and as directed by GE. |
| 16 | M & L for preparation of old surfaces by complete removal of existing treatment of painted ceiling incl beams etc. by mechanical equipments like electric wall sander/water jet machine and applying cement based putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two coat of distemper with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of alkali resistant primer complete, by mechanical means as per manufacturer\"s specification all as specified and as directed by GE. |
| 17 | M & L for preparation of old surfaces by complete removal of existing treatment of painted wall/ceiling incl pillar etc. by mechanical equipments like electric wall sander/water jet machine and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over wall surfaces complete, by mechanical means as per manufacturer\"s specification all as specified and as directed by GE. |
| 18 | S&F 4mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane including necessary hacking out old broken glass (any thickness, size, quality or description) from any type of frames or stone complete all as specified. |
| 19 | S&F 4mm thick sheet figured glass, pin head type and glazing with oil putty in squares n. exc 0.5 sq. m in each pane including necessary hacking out old broken glass (any thickness, size, quality or description) from any type of frames or stone complete all as specified. |
| 20 | NOTES FOR ITEM NO. 5, 7, 8, 15, 16 and 17:-(a) The work pertaining to periodical services & Water Proofing shall be executed byauthorized applicator through manufacturer of which the materials .i.e. Paint, Distemper,Putty etc. is proposed to be used by the contractor and approved by GE. (b) Cost of scaffolding upto 15m height of building shall be included in the quoted rate. (c) For surface preparation, complete removal, scraping and putty surface preparation mechanical sander (having mechanical vaccum mechanism) having RPM not less than 1500, with sanding pad should be used. (d) For application of Primer, Paint and Putty fully automatic airless spray machine should be used. (e)After preparation of the surface, Engr-in-Charge shall approve the same before applying primer and finishing coats. (f) Building wise stage passing register shall be maintained and shall be signed by Engr-in-Charge and contractor. Each stage shall be passed by Engineer-in-Charge before commencement of subsequent stage. The stage will be as follows (i) Surface preparation (ii) Application of Putty (iii) Application of Primer (iv) Application of Ist coat of Acrylic distemper/emulsion (v) Application of IInd coat of Acrylic distemper/emulsion (g) The equipments to be used in the work shall be certified by the manufacturer. (h) Paint to be centrally deposited with Engineer-in-Charge and store to be double locked with one lock of contractor and second lock of department, Paint will be issue centrally for execution of by MES Auth. (j) At the Execution time door and windows will be proper covered/protect and will be cleaned the walls, glass, window, window/door frame, floor, plinth protection, pavement after execution of work. (k) Contractor shall submit approved company generated 05 years warranty card for particular work carried out before submission of respective RARs. |
