|
| 1 | Demolition of reinforced concrete (cutting reinforcementas required to facilitate demolation of roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work all as specified. |
| 2 | M&L for Form work to sides and soffits of floor or roof beams,lintiles cantilever etc for flatrough finished surface complete all as directed. |
| 3 | M&L for RCCA1 1:1.5:3 grade, using20 mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels& similar RCC works all as specified and directed. |
| 4 | M&L for Form work to soffits of suspended slabs such as roof slabs floor slab landing and similar work for flat rough finished surface complete all as directed. |
| 5 | M&L for RCCA1 1:1.5:3 grade, using20 mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like& similar RCC works all as specified and directed. |
| 6 | M&L for cement concrete nominal mix M20 using20 mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like& similar RCC works all as specified and directed. |
| 7 | M&L for Form work to edges of suspended slabs n.exc 20 cm thickness for fair finished surface complete all as directed. |
| 8 | M&L for formwork to chajjas for rough finished surfaces complete all as specified. |
| 9 | M&L for RCC design mix M-25 grade, (using 20 mm graded stone aggregate) as in chajjas. |
| 10 | M&L for steel reinforcement of TMT bars (Fe-500 Grade) 10 mm dia and over cut to length and bent to shape required including cranking bending spirally for hooping for columns hooking end and binding with mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips all as specified and directed. |
| 11 | M&L for steel reinforcement of TMT bars (Fe-500 Grade)not exc 8 mm dia as in stirrups cut to length and bent to shape required including cranking bending spirally for hooping for columns hooking end and binding with mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips all as specified and directed. |
| 12 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 13 | Pre-painted galvalume aluminum zinc coating GI based Plain sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 14 | M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 |
| 15 | Demolition of brick work or stone boulder masonary built in cement mortar including all quoins arches pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed. |
| 16 | M&L for Brick work with with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 17 | M&L for Brick work with with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed. |
| 18 | M&L for Brick work with fly ash Bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed. |
| 19 | M&L for Brick work with sub class \"B\" brick straight or curved on planto any radius in half brick thick walls in CM 1:4 complete. |
| 20 | M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surface of slab, beam & ceiling surfaces finished even and fair all as specified and directed. |
| 21 | Taking down cement plaster on brick or stone walls,concrete surface etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed. |
| 22 | M&L for rendering 15 mm thick on brick wall or concrete surface in cement mortar 1:4 finished even & fair including mixing water proofing compound all as specified and directed.Note:-Water Proofing compound will be measured and paid separately. |
| 23 | Supply only Liquid water proofing compound |
| 24 | M&L for rendering 10 mm thick on fair faces of brick wall or concrete surface in cement mortar 1:6 finished even & fair all as specified and directed. |
| 25 | M&L for rendering 15 mm thick on fair faces of brick wall or concrete surface in cement mortar 1:4 finished even & smooth all as specified and directed. |
| 26 | M&L for rendering 15 mm thick on other than fair faces of brick wall or concrete surface in cement mortar 1:4 finished even & fair all as specified and directed. |
| 27 | M&L for providing cement concrete type B0 1:2:4 using 12.5 mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges |
| 28 | M&L for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed. |
| 29 | M&L for Rendering 15 mm thick on other than fair faces of brick surfaces or concrete surfaces and finished surfaces even & smooth in CM 1:6 complete. |
| 30 | M&L for preparationof new plastered surface of wall and applying two coats of Oil Bound Distemper over a coat of primer complete all as specified and directed by Engineer-in-Charge. |
| 31 | M&L for preparation of new plastered surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified. |
| 32 | M&L for preparation of new wall surfacesand applying two coats of acrylic emulsion paint over a coat of primer complete all as specified and directed. |
| 33 | M&L for preparation of plastered surface of wallsand applying two coats of oil bound distemper over one coat primer over and including one coat of cement base wall care putty applied as per manufacturer\"s instruction complete. |
| 34 | M&L forpreparation of new plastered surfaces of ceiling and applying three coats of white wash all as specified and as directed by Engineer-In-Charge. |
| 35 | M&L for water proofing treatment by applying one coat of oil base bituminous primer @.30Kg/sqm with brush/roller laying of 3 mm thick APP based polymer modified membrane (mineral finish)reinforced non-woven polyester,weight not less than 3.50 kg/sqm and sealing all the overlaps 100 mm in length side and 100 mm in width side of membrane laid with torch application complete all as specified and as directed. |
| 36 | M&L for Cement concrete tiles 25cm x 25cm x 22mm thick, with grey cement and no pigments, machine pressed, set in neat cement slurry over and including 15 mm thick screed bed in CM(1:4) and filling the joints with Tile Max premium cementitious grout material of JK Cement or its equivalent. |
| 37 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises. |
| 38 | M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified. |
| 39 | M&L for Glazed ceramic tiles in vertical surface 600x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick backing coat of cement mortar in 1:4 complete all as specified. |
| 40 | Taking down Chowkhats or frames with shutter without taking off shutters from the frames not exc. 1.5 sqm each complete all as specified and as directed. |
| 41 | Taking down Chowkhats or frames with shutter without taking off shutters from the frames exc. 1.5 sqm but n exc 4 Sqm each complete all as specified and as directed. |
| 42 | S&F Pressed steel frames of size 125x60 mm made out of 1.25 mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.with one shop coat of red oxide primer complete as specified and as directed. |
| 43 | M&L for cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in bed blocks for fixing hold fasts and filling of chowkhats etc complete all as specified and as directed. |
| 44 | S&F 30 mm thick factory made flushshutters, solid core construction withblock board core and plywood face panel veneer type on both side complete all as specified and as directed. |
| 45 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube but single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet, suppling & fixing in opening as per specification & drawing |
| 46 | S&F Factory Made Solid PVC flush door both side laminated complete all as specified and directed. |
| 47 | Supply and fix 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 48 | Supply & fix 100mm long hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 |
| 49 | S&F 200 mm size aluminium anodized barrel tower bolts of extruded section and fixed. |
| 50 | S&F 150 mm long aluminium anodised handle fabricatedtype all as specified and as directed by Engineer-In-Charge. |
| 51 | S&F 35 mm thick factory made glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc without sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters asspecified in SSR Part-1 section 8 clause 8.24(a) complete all as specified and as directed. |
| 52 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 53 | S&FStainless steel handles of size 150 mm, fabricated type anodised complete all as specified and as directed. Make Global,Hettich,Plantex |
| 54 | S&F Stainless steel barrel tower bolts 200 mm length of bolt of extruded section and fixed complete all as specified and as directed. Make Global,Hettich,Plantex |
| 55 | S&F Stainless steel 250 mm sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of stainless steel and fixed complete all as specified and as directed. Make Global,Hettich,Plantex |
| 56 | S&F floor door stopper of aluminium anodisedbodyand tengue, anodised with hard drwan steel spring overall length of cover plate 150 mm complete all as specfied and as directed. |
| 57 | S&F Aluminium Door closer hydraulically regulated die cast body, designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed. |
| 58 | M&L for preparation of new wooden surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 59 | M&L for powder coated aluminium frame for doors, windows, ventilators ( minimum thickness of powder coating 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified including powder coating. |
| 60 | M&L for powder coated aluminium window shutters (powder coating shall not be less than 50 microns of approved colour)side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed. |
| 61 | S&F 5.5 mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane. |
| 62 | Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 |
| 63 | M&L for preparation of new steel surfaces exc 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified. |
| 64 | M&L for preparation of old steel surfaces of any description or girth over 10 cm width or girth and applying one coat of synthetic enamel paint, completeall as specified and directed. |
| 65 | M&L for 50mm thick sand stone slab set and jointed over supports as in chajjas of ground and first floor\"s over windows, doors etc and jointed in cement mortar 1:4 complete all as specified and as directed. |
| 66 | M&L for Mild steel Joist, channel, angle, or tee sections, fixed independently, as support of Sandstone slab for chajjasof GF & FF complete all as specified and as directed. |
| 67 | M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth |
| 68 | Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 69 | Demolition of cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for bed of drain or coping etc complete all as specified and as directed. |
| 70 | M&L for PCC 1:4:8 Type D-2 (using 40mm graded stone agg) as in foundation filling and mass concrete as in bed of drain etc complete all as specified & directed. |
| 71 | M&L for PCC 1:2:4 type B-1 (using 20mm graded stone agg) as in coping benching bed blocks etc incl necessary form work complete all as specified & directed. |
| 72 | M&L for PCC 1:2:4 type B-2 (using 40mm graded stone agg) as in surface channel bed/drains/in manholesall as specified laid to slope and finished surface even and smooth complete all as specified & directed. |
| 73 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement incl forms moulds, mitered/stopped ends etc. complete all as specified & directed. |
| 74 | Add or deduct for each 25 mm girth or part thereof over or under 30cm ditto as item No 73 above. |
| 75 | M&L for PCC 1:2:4 Type B-2 (using 40mm graded stone agg) over NP-3 Pipe as in mass concreteetc complete all as specified & directed. |
| 76 | S&F for 600mm bore of pipe Reinforced concrete pipes, class NP-3 with one collar per length of pipe complete all as specified & directed. |
| 77 | M&L for factory made perforated heavy duty HD-20 Precast Cement Concrete manhole covers 75 mm thickness and size (0.50m x 1.00m) consisting of MS iron fillet along the perimeter of sides and weight of cover should not be less than 80kg all as specified and directed. |
| 78 | M&L for 100 mm thick cement concrete type-D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed. |
| 79 | M&L for 50 mm thick cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in plinth protection, finishing cement concrete surface even and fair without using extra cement complete all as specified and as directed. |
| 80 | M&L non skid colouredcermic ENDURA tiles 400x400x15mm thick set and jointed in neat cement slurry & pointed with coloured cement to match in floor over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 81 | M&L non skid colouredcermic ENDURA tiles exc 0.06 Sqm but n. exc. 0.11 Sqm10 mm thickset and jointed in neat cement slurry & pointed with coloured cement to match in floor over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 82 | M&l for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed |
| 83 | M&L for Coloured Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and directed |
| 84 | Taking up or down 15 mm bore steel tubing and connections including cleaning for refixing or removalfrom site complete all as specified and as directed. |
| 85 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth of brick walls complete all as specified and as directed. |
| 86 | S&F steel tubing ,galvanised, medium grade 15 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor complete all as specified and as directed. |
| 87 | Taking up or down 20 mm bore steel tubing and connections including cleaning for refixing or removalfrom site complete all as specified and as directed. |
| 88 | S&F steel tubing ,galvanised, medium grade 20 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor complete all as specified and as directed. |
| 89 | Dismantling water tanks exc 250 ltrs and n exc 500 ltrs capacity and removing to store or from site complete all as specified and as directed. |
| 90 | Supply and fix 500 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed. |
| 91 | S&F in repair long body bib taps cast copper alloy, chromium plated, fancy type with half turn handle weight not less than 550 gm ,screwed down, screwed for iron pipes15 mm bore dia complete all as specified and as directed. |
| 92 | S&F in repair fancy type 15 mm size long body bib tapscast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete. |
| 93 | S&F in repair fancy type 15 mm size long body angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes complete. |
| 94 | S&F in repairs stop valve, 15 mm chromium plated with long shank and cup (Concealed type) both ends for iron pipe |
| 95 | S&F in repair vitreous china wash hand basin white flat back size 550 x 400 mm including bracket and pair of rack bolts waste coupling pillar tap cast copper alloy chromium plated fancy type complete all as specified and directed by Engineer-in-Charge. |
| 96 | S&F in repairs 15 mm dia brass chromium plated pillar taplong shank with fly nuts capastan head screwed down high pressure with or without lettered hot or cold with long screwed shank complete. |
| 97 | S&F in repairs 750 mm long PVC flexible waste pipe 32 mm dia for fixing in urinals and wash basin complete. |
| 98 | S&F in repairdesigner looking mirror of size not less than 1.20 Sqm,selected quality5 mm thick including aluminium frame, mounted on 6 mm thick commercial plywood and fixed to wall with wooden plug & chromium plated brass screws complete. |
| 99 | S&F in repair 100 mm dia Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) |
| 100 | S&F in repair Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms) |
| 101 | S & F in repairs Viterous china squatting pan, Órissa\" pattern, size 580 x 440mm white, with integral foot rests including connection and fitting to trap, and to flushing pipe complete and making good to wall or floor tilling to match the existing complete all as specified. |
| 102 | S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, aluminium brackets for bottom support fixing with gitties embeded in wall with drilling machine etc complete. |
| 103 | S&F in repair 600 mm long PVC connections 15 mm size with PTMT nuts at both end complete. |
| 104 | S&F in repairs stainless steel towel rail 600 mm long 20 mm diafixed with steel screw etc complete all as specified. |
| 105 | S&F in repair stainless soap dish fixed to wall complete all as specified and directed. |
| 106 | S&F in repair 20 mm dia Gun metal, globe or gate valves,with iron wheel head,including making thread to both ends of pipes for fixing,screwed both ends for iron pipes and fixed. |
| 107 | Obliterating old writing of any description with synthetic enamel paint n.exc 0.10 sqm each to match the existing work complete. |
| 108 | M&L for Writing letters or figures (Block, Roman, Italic or Indian) n.exc 30 Cm high. |
| 109 | S&F in repair 75 mm dia PVC floor trap plain with grating including jointing with solvent cement complete all as specified. |
| 110 | S&F in repair 75 mm dia PVC (SWR) bends any radius complete all as specified. |
| 111 | S&F in repair 110 mm dia PVC(SWR) plain bends any radius complete all as specifiedand directed. |
| 112 | S&F in repair 75 mm dia PVC (SWR)pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified. |
| 113 | S&F in erpair PVC (SWR) 110 mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified. |
| 114 | S&F in repair PVC (SWR) 110 mm dia pipes single socketed, in any length with rubber ring joints, fixed on wallscomplete all as specified. |
| 115 | Taking down carefully aluminium / copper point wiring (light, fan, socket any type, power, bell etc.) complete including fixtures & fittings (such as ceiling rose, socket, Pendent, regulator, light fittings etc) and removing the materialfrom site and making good the disturbed surfaces of walls ceiling etc complete all as directed.(Note: Credit for above items should be made as per credit Schedule separately). |
| 116 | M & L for Point wiring for One light/ fan point controlled by one way switch 5 amp with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed (FRLS) cable, multi-stranded, 1100 volts grade copper conductor, inuniversal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases (making good all to the disturbed surfaces as per existing) including with modular flush metal boxes with modular cover plates & frame for mounting modular switches, sockets, regulators etc and including earth wire of PVC insulated (FRLS) copper conductor multistranded of 1.5Sqmmsize in green colour complete all as specified in current SSR Part-I & II & directed by the Engineer-in-Charge as described below:- |
| 117 | All as per item No. 11600 butfor One 3 pin 5 Amps socket point controlled by one way switch on same board. |
| 118 | All as per item No. 116.00 butfor One 3 pin 5 Amps socket point controlled by one way switch on independent board. |
| 119 | All as per item No. 116.00 butfor 3 pin / 5 pin 16 Amps sockets outlet with 4 Sqmm PVC insulated & unsheathed (FRLS) copper conductor cable independent Point wiring complete all as specified and as directed . |
| 120 | S&F ceiling rose, PVC / Polycarbonate, isolated body 65mm x 50mm three terminals complete. |
| 121 | S & F switch piano, flush type, 6 Amps single pole one-way complete. |
| 122 | S & F switch piano, flush type, 15 Amp single pole one way complete all as specified. |
| 123 | S & F socket outlet, flush type, 2-in-1, 5 pins 5 Amps complete. |
| 124 | S & F socket outlet, flush type, 2-in-1, 3 pins 5 /15 Amps complete. |
| 125 | Supply & Fixing steepped type electronic fan reglator, flush type, on existing phenolic laminated sheet etc complete all as specified. |
| 126 | Supply & Fixing lamp holder, PVC / polycarbonate type with back plate suitable for batten. |
| 127 | S&F bulkhead IP 65 10 watt LED light complete. |
| 128 | S&FAC Box with SP 20 Amp MCB,metal enclosure complete all as specified. |
| 129 | Supply & fixing indoor decorative ultra slim surface /Wall mounted LEDbatten tube light complete fitting 1x 20 watt LED Tube fitting with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts, co- related colour temperature (CCT) of 6500K, >100 Lm/Wattcomplete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge. |
| 130 | Supply & fixing indoor decorative ultra slim surface /Wall mounted T5 LEDbatten tube light complete fitting 1x10 watt LED Tube fitting (size within 600x25x40 mm) suitable for mirror light with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- relatedcolour temperature (CCT) of 6500K,>100Lm/Wattcomplete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge. |
| 131 | Supply and fixing LED 9W suitable for normal holder(Base Cap B22) complete all as specified. |
| 132 | Supply and install of 30 / 35 W LED building security light fitting with lens & driver, powder coated pressure die cast aluminium, top opening and maintainablewith heat resistance toughened glass, built-in Short-Circuit Protection, Over voltage Protection and Surge Protection, IP-65 proction with luminaire efficiecy of greater than 80Lumen/Watt, Colour rendering (CRI) of ≥ 70 and co- relatedcolour temperature (CCT) of 5700K (±500K) . The luminaire should have 10 KV surg protection, PF≥ 0.9 and total harmonic distortion of THD ≤ 10%, voltage range of 140-280Vincluding all connections complete all as specified. |
| 133 | M&L for building securitylight bracket made out of 40mm dia light grade GI pipe of 1.2 m length bent to required shape suitable for fixing street light fitting on Steel tubularpole/wall including two Nos clamps made out 40mm X 6mm flat with suitable nuts and bolts including two coats of aluminium paint over a coating of red oxide primer complete all as directed taking down old unserviceable bracket as scrap any size / description. |
| 134 | Taking down old unserviceable existing SPN/TPN DBs / enclousers any size and type / any descriptions as iron sheet scrap including MCB any type / size and making good disturbed surface / wall as per existing complete all as specified and directed |
| 135 | S&F MCB distribution board, SPN 8 Way, Double door, sheet steel, phosphatised, powder painted withbus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, complete all as specified. |
| 136 | All as per Item No 135.00 but for 12 Way |
| 137 | S&F MCB SPN32 Amps,\" C\" series , bracking cap 10KA, 240V complete. |
| 138 | S&F MCB SP 6-32 Amps, \" C\" series ,bracking cap 10KA, 240V complete. |
| 139 | S&F ceiling fan complete with blades, down rods, regulator and accessories, 230 V, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE, 5 stare rated with brushless direct current motor (BLDC) complete all as specified and as directed |
| 140 | S&F exhaust fan, steel body AC single Phase 230V of size 300mm sweep with blades, and frame and louvers complete all as specified and as directed |
| 141 | Cutting holes for air ducting of exhaust fan in Circle / square shape as per requirement and making good to facing where required & pointing in CM 1 3 to ends or edges complete all as specified and as directed. |
| 142 | Supply, laying, jointing and testing of XLPE insulated, sheathed, armoured, heavy duty LT 1100 volts grade cable with aluminium conductor cable size 16 sq mm 4 core laid in trenches / duct / fixing on walls / poles or passing through HDPE double wall corrugated pipe (outer dia should not be less then 40 mm) including connecting with suitable lugs, glands, nuts and bolts in existing Panelfrom pole / Main Panel Box and testing complete all as specified and directed of following sizes :-Note:- HDPE pipe rate shall be deemed in quoted rate above. |
| 143 | All as per Item No 142.00 but for cable size 10 sq mm 2 core |
| 144 | M&l for Earthing complete with GI earthplate 600mm x 600mm x 6.3 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI wire 4.0 mm asearth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5of MES schedule Part-I and incl 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate,reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and charcoal filling incl necessary excavation and earth work complete all as specified and as directed. |
