Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Taking down chowkhat or frame (wooden /steel)not exceeding1.5 Sqm each with shutter (with out taking off shutters from the frame) all as specified and as directed. |
| 2 | Taking down chowkhat or frame (wooden/steel) exceeding 1.50 Sqm and not exceeding4.0 Sqm each with shutter (with out taking off shutters from the frame) all as specified and as directed. |
| 3 | Taking down shutters of any description exc 1.0 Sqm andn.exc 2.0 Sqm each complete all as specified and directed. |
| 4 | M&L for taking down shutter of any description exc 1sqm andn exc 2sqm each and refixing in the same openingcomplete all as specified and directed. |
| 5 | M&L Second class hard wood plain, solid, straight Chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at jointscomplete all as specified and directed. |
| 6 | M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with M.S. Square tube, suppling & fixingedges will be painted to match with prelam sheet all as specified and directed. |
| 7 | M&L for Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face including neccessary fitiings etc complete as specified and directed. |
| 8 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm complete all as specified and directed. |
| 9 | S&FMS framed work as in doors or gates of angle tubes or other section with gusset plates, rails, braces,guard bar etc., complete, to be prepared for hanging or sliding with and includinghinges or steel hanging door fittings (exclusive of steel sheeting or other covering) and hanging; also fastening and fixing Fe 410 -W (Gde- E- 250) quality-A complete complete all as specified and directed. |
| 10 | S&F flushdoor 35mm thick membrane doors decorative finishon one side duly finished and polished and other side all as per manufacturers directions as per tint / colour including necessary teak wood lippings as necessary complete all as specified and directed. |
| 11 | S&F fly proof door 35mm thick membrane doors decorative finishon one side duly finished and polished and other side all as per manufacturers directions as per tint / colour including necessary teak wood lippings as necessary complete all as specified and directed. |
| 12 | S&F Factory made 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters all as specified and directed. |
| 13 | S&F 2nd class hard wood 35mm thick Factory made plain framed panelled shutter any number of panelswith lock rail and panel of 9mm BWP commercial ply or 12mm veneered partical board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 14 | S&F 30 mm thick factory made flush shutter solid core construction with block board core and plywood face panels, comercial type on both faces complete all as specified and directed. |
| 15 | S&F Butt hinges of size 75mm extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type C-21 all as specified and directed. |
| 16 | Supply and fixing 100mm long Butt hinges medium weight cold rolledstainless steel, and fixed complete all as specified and as directed. |
| 17 | Supply and fixing in repairs Powder coated aluminium (minimum thickness of powder coating 50 micron) frame work for doors, windows, ventilators and partitions (Fixedportions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws,included rubber beading complete all as per architectural drawings complete all as specified and directed |
| 18 | Supply and fixing in repairs powder coated aluminium for shutters of window and ventilator shutters, sliding type without sash bars, aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 No.) suitable handle (1 No.) complete all as specified, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, star lock, including rubber beadingcomplete all as per architectural drawings complete all as specified and directed |
| 19 | S&F sheet glass ordinary quality 4mm thick and glazing with oil putty or aluminium beading in square n exc 0.50 Sqm in each pane fixed with aluminium window and ventilator including taking down old one of any description complete all as specified and directed. |
| 20 | All as item No. 19 above but figured glass pin head type complete all as specified and directed. |
| 21 | S&F 250mm aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extrudud sections or cast- aluminium alloy and fixed complete all as specified and as directed. |
| 22 | S&F aluminium anodised, barrel tower bolt 150mm of extruded section complete all as specified and directed. |
| 23 | S&F aluminium handle 150mm cast type anodised complete all as specified and directed.. |
| 24 | S&F 200 mm long aluminium anodized barrel tower bolt extruded section complete all as specified and as directed. |
| 25 | S&F aluminium handles cast type anodised 200 mm long complete all as specified and as directed. |
| 26 | S&F in repairsfloor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor overall 140mm complete all as specified and as directed. |
| 27 | S&F in repairs 300mm, ordinary mild steel rat tail rod pattern door springs including roller and roller plate complete all as specified and directed. |
| 28 | S&F in repairs 18/19 mm thick ,water proof plywood , fixed to Cupboard work in any position with nails including removal of old boards of any description complete all as specified and as directed. |
| 29 | S&F Decorative laminates of 0.90 mm thick type matt finish, fixed with adhesive colour and pattern as approved including taking down existing one complete all as specified and as directed. |
| 30 | S&F PVC beading for cupboard work, colour and pattern as approved including taking down existing one complete all as specified and as directed |
| 31 | S&F Magnetic catches with 8mm dia steel ball and brass body and striking plate including taking down existing one complete all as specified and directed. |
| 32 | S&F Continuous (piano) hinges,brass ,bright finish of electrogalvanised 40 mm width of flap when opened complete all as specified and directed.. |
| 33 | Preparation of new wood orwoodensurface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed |
| 34 | M&L Providing two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces over 10 cm width or girth including preparation of new steel surfaces all as specified and directed. |
| 35 | M&L in repairs20mm dia mild steel powder coated drapery rod cut to length required without joint in between and including mild steel powder coated fancy type brackets and fixed at openings including taking down existing one complete all as specified and directed. |
| 36 | S&F in repairs looking mirror of size 600mm x 450mm on commerical ply wood 6mm thick with PVC/ wooden moulding beading fixed to wooden plugs with chromium plated brass, screws and cup, washers, aluminium frame and fixed complete all as specified and directed. |
| 37 | M&L for 18mm thick WPC board for kitchen cabinets door, shelves, sides and back, one side white in colour and other side dark colour, including taking down old one complete all as specified and directed. |
| 38 | S&F Stainless steel handles of size 100 mm of approved pattern and make suitable for base/ wall unit of modular kitchen including taking down the existing one complete all as specified and directed. |
| 39 | S&F Stainless steel handles of size 150 mm of approved pattern and make suitable for Base/Wall unit of modular kitchen including taking down the existing one complete all as specified and directed. |
| 40 | S&F Stainless steel spring hinges of size of approved pattern and make suitable for base/wall unit of modular kitchen including taking down the existing one complete all as specified and directed. |
| 41 | S&F in repair Stainless Steel kitchen cup and saucer Basket of size 48 cm x 50 cm x 10 cm including telescopic channel fixed to drawers complete all as specified and directed. |
| 42 | S&F in repair Stainless Steel kitchen cup and saucer Basket of size 48 cm x 50 cm x 15 cm including telescopic channel fixed to drawers complete all as specified and directed. |
| 43 | S&F in repair Stainless Steel kitchen cup and saucer Basket of size 48 cm x 50 cm x 20 cm including telescopic channel fixed to drawers complete all as specified and directed. |
| 44 | Roughening surface of old concrete floor by picking, sweeping, clean and washing down with water to remove dust etc and brushing neat cement slurry with 3kg of cement per sqm complete all as specified and directed. |
| 45 | Dismantling floor, floor hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises andM&L for Joint free Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile of size exc 0.18 Sqmbut n exc 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incuding screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:4) complete all as specified and directed. |
| 46 | Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) and removing rubbish off from premises & M&L forceramic coloured tiles of size 350mm x 250mm / 300mm X 450mm x 7 to 8 mm thick, on vertical surfaces, set and jointed in neat cement slurry and pointed in coloured / white cement to match the tiles inc rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces as in backing coat to receive wall tiles etc complete all as specified and directed. |
| 47 | Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) and removing rubbish off from premises & M&L for joint free non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exc 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointedin white or coloured cement to match incl 15 mm thick screed bed in cement mortar 1:4 for layingfloor finishes complete all as specified and directed. |
| 48 | Material and labourfor 25 mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in flooring surface as in level course etc surface finished even and fair complete all as specified and directed. |
| 49 | M&L in repairs Pre-cast PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) cement concrete block masonry with solid blocks exc. 10cm in width and set in cement mortar 1:6 including demolition of old brick work / stone masonry/PCC block built in cement mortar of any description complete all as specified and as directed. |
| 50 | M&L in repairs pre castPCC 1:3:6 type C1 (using 20 mm graded stone aggegate) cementconcrete block masonary with solidblocks n exc 10cm thick width in cement mortar 1:4 includingdemolition of old brick work / stone masonry/PCC block built in cement mortar of any description complete all as specified and as directed. |
| 51 | Taking down cement plaster on brick or stone walls, or concrete walls including raking out joints, hacking for key, scrubbing down with water, etc.,including removal of rubbish off the premises and leaving the work clear of any plastering and material and labour for 10mm thick cement plaster in CM (1:6) on brick work or concrete surfaces rendering is to be even & smooth without using extra cement complete all as specified and directed. |
| 52 | M&L 15mm thick cement plaster in CM (1:4) on brick work or concrete surfaces and finished even & smooth without using extra cement complete all as specified and directed. |
| 53 | Material and labour for keyed pointing in cement mortar 1:4 to random or polygonal rubble including racking out joints / points in cement mortar to squared rubble masonary coursed or un coursed complete all as specified and directed. |
| 54 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 55 | M&L applying two coat of cement based paint over a coat of alkali resistance primer, including preparation of newly plastered wall surfaces with smooth finish complete all as specified and as directed. |
| 56 | M&L for complete removal of existingtreatment of wallfinish and applying a coat of wall care putty over existing surface to prepare the surface even and smoothfinish and applying two finishing coat of oil bound distemper over a coat of primer complete all as specified and directed. |
| 57 | M&L for preparationof old surfaces of walland applyingtwo coats of white washing complete all as specified and directed. |
| 58 | M&L for complete removal of existing treatment of ceilingfinish and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 59 | M&L for Preparation of old painted wooden surface of any description and applying one coat of synthetic enamel paintnot otherwise described over 10 cm width or girth, complete all as specified and directed. |
| 60 | M&L for Preparation of old painted surfaces of steel and applying one coat of synthetic enamel paintover 10 cm width or girth, not other wise describedcomplete all as specified and as directed. |
| 61 | Supply and fix polished Sadarahalli granite slab flooring 20 to 22 mm thick with grey cement slurry mixed with pigment to match the shade of the slab including 20mm thick screed bed in cement mortar 1:4 complete on staircase etc complete all as specified and as directed. |
| 62 | Supply and fix polished Sadarahalli granite slab skirting / dados etc20 to 22 mm thick with grey cement slurry mixed with pigment to match the shade of the slab including 15mm thick backing in cement mortar 1:4 complete on staircase etc complete all as specified and as directed. |
| 63 | Demolition of cement concrete in ground floors and pavings nexc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 64 | M&L PCC (1:4:8) type D2 (using 40mm graded stone aggregate) 75mm thick as in sub base of floor finished even and rough to receive top layer all as specified and directed. |
| 65 | M&L in repairs 300x300x25mm thick prepolished cement concrete chequered tiles jointed in neat cement slurry and pointed in white or coloured cement to match the floor and including 20mm thick screed bed in CM (1:4) and incl removal of old unserviceable tiles and necessary demolition all as specified and directed. |
| 66 | M&L for broken stone boulders hard core of guage n.exc 63mm deposited spread and levelled, laid in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 67 | Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and taking out old unserviceable steel / plastic /cpvc water tubing and connections complete all as specified and directed. |
| 68 | Supplying and laying of 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and taking out old unserviceable steel/plastic/cpvc water tubing and connections complete all as specified and directed. |
| 69 | Supplying and fixing in repairs of 20mm outer dia Female Brass Threaded Adaptor (FTA/ FBTA CPVC complete all as specified. |
| 70 | Supplying and fixing in repairs of 25mm outer dia Female Brass Threaded Adaptor (FTA/ FBTA CPVC complete all as specified. |
| 71 | Supplying and fixing in repairs 20mm outer dia CPVC brass elbow all as specified and directed. |
| 72 | S&F in repairs Bib taps cast copper alloy chromium plated fancy type screwed down screwed foriron pipe or for brass ferrule and fixed for 15 mm bore complete all as specified and as directed. |
| 73 | S&F in repairs Angular stop cock, chromium plated valves high pressure screwed both ends iron pipe or for unioins 15mm dia, including taking down existing one complete as directed. |
| 74 | S&F in repairs vitreous china wash down water closet (Pedestral pattern) EWC white incl plastic water closet seat cover and mild steel chromium plated or aluminium hinging device and connecting to \"P\" or \"S\" trap incl connecting flush pipe with flushing rim complete all as specified and as directed. |
| 75 | S&F in repairs plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device all as specified and directed. |
| 76 | S&F in repairs PVC low level flushing cistern 10 Lit capacity including necessary brackets incl connecting flush pipe etcand making good the disturbed surfaces complete all as specified and as directed. |
| 77 | S&F wash hand basin vitreous china (flat back and angle back type) size 580x400mm including taps wastechain and plug and porceline stopper but brackets including cutting for and pinning inends of brackets or erecting stand with waste pipe, fixed including taking down existing one complete all as specified and directed. |
| 78 | S&F in repairs pillar tap with capstan heads chromium plated fancy type screwed down high pressure with or withoutletter \"Hot\" or \"Cold\" with long screwed shanks and flynuts screwed for galvanised iron pipe and fixed complete for 15 mm bore complete all as specified and as directed. |
| 79 | S&F CP Concealed stop cock, Regular body with adjustable wall flange screwed down screwedfor iron pipe15mm bore.including taking down existing one complete all as specified and as directed. |
| 80 | S&F in repairs Overhead Shower rose 125mm size (Brass Chrome Plated)complete all as specified and as directed. |
| 81 | S&F in repairs tubular towel rail brass chromium plated 20 mm dia \"D\" type 60 cm long between flangescomplete all as specified and as directed. |
| 82 | S&F Rotational moulded polyethylene water storage tank of1000 Ltrs capacity cylindericalvertical with closed top including 3 Nos GI check nuts and tank nipple of 25mm bore for inlet and outlet, 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specified in SSR part -I including taking down of old unserviceable tank complete all as specified and directed. |
| 83 | S&Fin repairs PVC connection pipe 15 mm dia, 600 mm long with check nut and bolt with washer complete all as specified and as directed. |
| 84 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including taking down existing one complete all as specified and as directed. |
| 85 | S&F in repairsCPTowel ring fixed with and including Chromium plated brass screws and wooden / plastic cleats,complete all as specified and directed. |
| 86 | S&F in repairs stainless steel Soap dish fix to wall complete all as specified and directed. |
| 87 | S&F in repairs Corner glass shelf of large size 300mmx300mm complete all as specified and directed. |
| 88 | S&F PVC body cabinet box mirror of size 350mm X 450mm X 100mmof PTMT alloy of approved pattern and design including taking down existing one complete all as specified and directed. |
| 89 | S&F in repairsglass shelf of size 12 cm wide x 60cm long for wash hand basincomplete all as specified and directed . |
| 90 | S&F in repairs grating doom 125mm dia with waste hole of Chromium plated (Min wt 40 gms) complete all as specified and as directed. |
| 91 | S&F in repairsstainless steel Liquid soap container fixed with and including chromium plated brass screws and wooden / plastic cleats, complete all as specified and directed. |
| 92 | S&F in repairs gun metal globe or gate valve with iron wheel head, secrwed both ends for iron pipes of 20 mm bore complete all as specified and directed. |
| 93 | S&F in repairssink cockfancy type complete all as specified and (table mounted)with 215 mm swivel spout complete all as specified and as directed. |
| 94 | S&F in repairs Towel Rack with lower hanger (stainless steel), fixed with screws , complete all as specified and directed. |
| 95 | S&F in repairs CPShower arm 15 mm size, 195 mm long with bend of 45 degree with flangeas specified and as directed. |
| 96 | S&F in repairs brass chromium plated wall mixer for mixing hot & cold water screwed down for 15mm bore iron pipecomplete all as specified and directed . |
| 97 | S&F in repair gun metal globe or gate valve with iron wheel head, secrwed both ends for iron pipes of 25 mm bore complete all as specified and directed. |
| 98 | S&F in repairs Plate rack of size 65 cm x 96 cmmade of stainless steel (heavy duty) complete all as specified and directed. |
| 99 | S&F Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall orincluding fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm fixed in repairsall as specified and directed. |
| 100 | S&F in repairs CP 2 way bib cock with wall flange fancy type screwed down screwedfor iron pipe in repairs 15mm bore complete all as specified and as directed. |
| 101 | S&F in repairs PVC waste pipe 32/40mm bore for WHB, Urinal & Sink complete all as specified and as directed. |
| 102 | M&L Granite 18 to 20mm thick (table rubbed and polished) in steps, Jambs, Pillars, Windows, cills, platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigments to match with marble shade of Granite over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:4) all as specified and as directed. Note :(i)The Unit rate quoted is included for demolition of old Stone Slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar.(ii)Cost of rounding of stone edges deem to be included in unit quoted rate. |
| 103 | S&F in repairs PVC (SWR) floor trap 75mm dia of outlet pipe, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 104 | S&F in repairs 125/ 110 mm bore PVC (SWR) floortrap plain with grating incl jointing with solvent cement complete all as specified and as directed. |
| 105 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/trenchesbore of pipe 110 mm with PVC clamps and saddles including taking down old existing pipes and dismantling of cast iron/RCC/PVC drain pipes jointed in cement mortar and taking out from trenches or walls of any bore including fittings complete all as specified and as directed |
| 106 | S&F in repairs PVC (SWR) bends of any radius with access door bore of pipe 110 mm complete all as specified and as directed. |
| 107 | S&Fin repairs PVC (SWR)junction single (single T)equal or unequal with access door bore of pipe 110 mm complete all as specified and as directed. |
| 108 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/trenchesbore of pipe 75 mm with PVC clamps and saddles including taking down old existing pipes and dismantling of cast iron/RCC/PVC drain pipes jointed in cement mortar and taking out from trenches or walls of any bore including fittings complete all as specified and as directed |
| 109 | S&F in repairs PVC (SWR) bends of any radius with access door bore of pipe 75 mm complete all as specified and as directed. |
| 110 | S&Fin repairs PVC (SWR)junction single (single T)equal or unequal with access door bore of pipe 75 mm complete all as specified and as directed. |
| 111 | Supply and fixing in repairs 8 feet 4 pipespulley operated cloths drying system consisting of aluminium pipe of outer dia 22mm, inner dia 19.80mm,made up of detrin with rope guide mounted on channel pair of length 24 feet (distance between two pipes is adjustable) locking system to hide rope knot, channel to be mounted or fixed with self taping screws provided in kit. Rope will be HDPE double core of 4mm dia fixing to ceiling as specified and directed by Engr-in-Charge and minimum weight of one pipe shall not be less than 0.20kg/, minimum weight of rope shall not be less than 7700Gms/unit. Make Easydry or equivalent. |
| 112 | M&L for plain cement concrete (1:3:6) type C1 (using 20 mm graded crushed stone aggregate), 75mm thick, as in plinth protection courses, top surface of concrete finished even and smooth with out using extra cement,including expansion joint 10mm thick filled with mastic filling comprising of 01 part of heated blown bitumen and 3 parts of dry sand complete all as specified and directed. |
| 113 | M&L for preparation of old plastered surfaces of wall by using pressure washer, removal all dirt and dust and applying one coat of exterior emulsion weather proof paintcomplete all as specified and as directed. |
| 114 | Excavation in trenches not exceeding 1.5 mtr in width and not exceeding 1.5 mtr in depth for laying of cables up to proper level and laying of pipelines etcinsoft/loose soil, complete all as specified and directed. |
| 115 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick, complete all as specified and directed. |
| 116 | Removing surplus soil to a distance not exceeding 50 Mtr and deposting where directed at a level not exceeding 1.5 Mtr above the starting point all as directed. |
| 117 | Supply & Fix as in replacement of GI tubing medium grade of size 50 mm bore with all fittings on wall/ trenches complete including cutting and threading all as required at site complete all as specified directed.Note:Excavation & earthwork shall be measured & paid seperately |
| 118 | S&F in replacement Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 50mm complete all as specified and directed. |
| 119 | Supply & Fix as in replacement of GI tubing medium grade of size 25 mm bore with all fittings on wall/ trenches complete including cutting and threading all as required at site complete all as specified directed. Note:Excavation & earthwork shall be measured & paid seperately |
| 120 | S&F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 25 mm complete all as specified and directed. |
| 121 | Cutting existing water supply main line in position for insertion of specials / fittings viz Tee etc. of suitable size for making branch connection including testing after completion complete all as specified and directed. |
| 122 | Supply & Fix as in replacement of GI tubing medium grade of size 20 mm bore with all fittings on wall/ trenches complete including cutting and threading all as required at site complete all as specified directed. Note:Excavation & earthwork shall be measured & paid seperately |
| 123 | S & F in replacement Bib taps, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe fixed of size 20 mmfor brass ferrule fancy type and fixed complete all as specified and directed. |
| 124 | Taking down aluminium/copper point wiring & including hard wood battens, surface conduit and board/ blocks etc or through conduits for light, socket or power point, fan point complete and making good the disturbed plaster surfaces of wall, floor, ceilingand painting 2 coat of white wash/distamber to match the existing surface, complete all as specified and directed. |
| 125 | M & L for Point wiring with PVC insulated FRLS 1.5 sq mm multi stranded copper conductor cable 1100 Volts grade drawn into and including rigid non mettalic PVC conduit/casing caping medium grade not less than 19/20 mm ( ISI marked ) with all fitting and fixing accessories including sunk in pressed steel chromium plated terminal boxes, concealed/surface in wall/roofs/floor/ceiling etc as per site requirement and making & matching the existing surface ) white bakelite sheet cover for mounting switches, Sockets, Fan regulators etc or modular cover plate with frame including sunken boxes suitableto fix modular cover plate with frame , concealed in wall and 1.5 sq mm multi stranded copper conductor cable as continuous earth wire drawn with wiring and connected to common earth dolly complete all as specified and directed for the following :- Make of wire: Polycab/Plaza/HavellsNote:Blanking plate,Modular cover plate ,Switches, sockets outlets, Light fittngs, fans, bells & regulators shall be measured and paid for separetely). |
| 126 | All as per item No. 125 here in before but for one light point/fan/bell point controlled by one wayswitch. |
| 127 | All as per item No. 125here in before but for one light point controlled by twowayswitch. |
| 128 | All as per item No. 125 here in before but for one 3 pin socket outet 5 Ampon the same board |
| 129 | All as per item No. 125 here in before but for one switch socket outlet 3 pin 5 Amps on independent board |
| 130 | All as per Sl No. 125 above but Wiring with 4 Sqmm copper multistranded unsheathed cable and 4 Sqmm copper cable for earth continuity conductor controlled by one 15A switch socket independently complete all as specified and directed. |
| 131 | Supply and Fixmodular switch1 way 6 Amp.1 module, complete all as specified and directed.Make : Legrand/ Crabtree/ Anchor/Indoasian |
| 132 | Supply and Fixmodular switch2 way 6 Amp.1 module, complete all as specified and directed.Make : Legrand/ Crabtree/ Anchor /Indoasian |
| 133 | Supply and Fixmodular switchbell push .1 module, complete all as specified and directed.Make : Legrand/ Crabtree/ Anchor /Indoasian |
| 134 | Supply and Fixmodular Socket, 6A - 2/3 pin combined 2 module, complete all as specified and directed.Make : Legrand/ Crabtree/ Anchor/Indoasian |
| 135 | Supply and Fixmodular switch1 way 16 Amp.1 module, complete all as specified and directed. Make :Legrand/ Crabtree/ Anchor /Indoasian |
| 136 | Supply and Fix modular Socket, 16A - 3/5 pin combined 2 module, complete all as specified and directed. Make : Legrand/ Crabtree/ Anchor/Indoasian |
| 137 | S & F Modular fan regulator 120W, 2 Module for ceiling fan complete all as specified and directedMake : Legrand/ Crabtree/ Anchor |
| 138 | S & F ceiling rose 3 phase/PVC/polycarbonate, isolated body complete all as specified and directedMake : Anchor/Havells/L&T/ Indo Asian |
| 139 | S & Felectric bell, AC 230 volt, single pole Ding Dong type complete all as specified and directed. Make :Anchor/Havells/L&T |
| 140 | Supply and fix Lamp holder, PVC/Polycarbonate type with cord grip cap incl 15 Watt LED bulb all as specified and all as directed. |
| 141 | Supply and fix White cover plate with frame,2/3 module |
| 142 | Supply and fix White cover plate with frame,4 module |
| 143 | Supply and fix White cover plate with frame,8 module |
| 144 | Supply and fix White cover plate with frame,6 module |
| 145 | Supply and Fixing in repairs of 4 feet surface mounted batten type luminaire , lumen output of 2000 lumens, high efficiency long life LED package in integral module with lumen efficacy of >100 lm/w, viewing angle not less than 120° to ensure better uniformity with an operating voltage range from 140V-270V. The luminaire shall have a white extrusion housing with a poly carbonate diffuser to provide uniform light and sleek design with width not more than 22 mm. The luminaire shall have a CRI >80, Color temperature 6500K, THD <10% and PF >0.95,SDCM<5, IP20, IK02, Operating Temperature: -10 TO + 45 DEG.C; Input Supply Voltage Range:140-270 V, Frequency :50-55 HZ. The luminaire shall have flicker content<5% and shall have high and low cut off with auto restart feature.Driver Safety requirement stds: IS 15885-2-13. The luminaire shall be EMI/ EMC compliant and shall have a internal surge protection of 4 KV. The luminaire shall have Class-1 Electrical insulation, Class-B serviceability .The luminaire and driver shall be BIS approved, complete all as specified and directed.Make : Philips/ Bajaj / CG/Havells. |
| 146 | M&L for sub main wiring with PVC insulated unsheathed FRLS cable 1100 volts grade multi stranded copper conductor cable 2 runs of 4 Sqmm drawn through in and incl suitable size surface PVC casing caping/PVC Conduit and all accessories fixed to wall/floors along with 4 Sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly including taking down existing sub main wiring of any size complete all as specified and directed..Note: (a)2 runs of 4 Sqmm cable along with one run of 4 Sqmm cable for earth conductor shall be measured as one length complete all as specified and directed.Make:- Havells/ Polycab/ Plaza. |
| 147 | S&F in replacementfactory madepowder coated distribution board VTPN, 4 way double doorMCCB DB includingbus bar, Neutral bar, standard DIN rail, earth bar complete including taking down unserviceable DBcomplete all as directedMake : Indoasian/ Havells/ Legrand. |
| 148 | S&F in replacement distribution board MCCB four pole, 100 Amp ultimate breaking capacity 16 KAconforming to IEC -61439-1, complete all as specified and directed. Make : Legrand/ L&T/ Indo Asian |
| 149 | S&F in replacement factory madepowder coated distribution board SPN 12 way double door,includingbus bar, Neutral bar, standard DIN rail, earth bar complete including taking down unserviceable DBconforming to IS: 8623, all as specified and directed. Make : Legrand/ L&T/ Indo Asian |
| 150 | S & F MCB in repair SPN 240 volts 32 to 40 Amps suitable for \"C\" curve, 10 KA complete including taking down old unserviceable fitting complete all as specified and as directed .Make : Legrand/ L&T/ Indo Asian. |
| 151 | Taking down of old unserviceable of ceiling fan of any size and keeping in safe custody complete all as specified and directed. |
| 152 | Refixingexisting serviceable ceiling fans 1200/1400 mm sweep after servicing, painting. of ceiling fan with one coat of synthetic enamel paint by spraying including greasing/oiling, fillingcavities with filler after cleaning all dust etc. completeall as specified and as directed. Note : cost includes replacement of rubber bush ,hanging hook with new cotter pins etc |
| 153 | Taking down of old unserviceable exhaust fan of any size and keeping in safe custody complete all as specified and directed. |
| 154 | Refixingexisting serviceable Exhaust fans 300/225 mm sweep servicing, paintingExhaust fan with one coat of synthetic enamel paint by spraying including greasing/oiling, fillingcavities with filler after cleaning all dust etc. completeall as specified and as directed by Engineer-in-Charge. |
| 155 | M&L for cutting of hole through stone wall with the help of Core cutting machineincluding providing, fixing and removing shoring,cleaning,internal plastering and removing surplus hard core,rubbish not exceeding 50 mtrs including fixing of exhaust fan of size 250-450 mm all as specified and as directed. |
| 156 | Supply and fixingExhaust Fan 300 mm sweep, 230/240 volt AC single phase, PVC body,1400 RPM, suitable hold fast with necessary nut, bolts / screws with louver including taking down existing one,writing MES No. with synthetic enamel paint all specified and directed. Make- Havells /Bajaj/ Almonard.Note:-Old Unserviceable domestic exhaust fan shall be deposited to MES store yard. |
| 157 | Supply and Fixing in repairs of 2 feet surface mounted batten type luminaire , lumen output of 1000 lumens, high efficiency long life LED package in integral module with lumen efficacy of >100 lm/w, viewing angle not less than 120° to ensure better uniformity with an operating voltage range from 140V-270V. The luminaire shall have a white extrusion housing with a poly carbonate diffuser to provide uniform light and sleek design with width not more than 22 mm. The luminaire shall have a CRI >80, Color temperature 6500K, THD <10% and PF >0.95,SDCM<5, IP20, IK02, Operating Temperature: -10 TO + 45 DEG.C; Input Supply Voltage Range:140-270 V, Frequency :50-55 HZ. The luminaire shall have flicker content<5% and shall have high and low cut off with auto restart feature.Driver Safety requirement stds: IS 15885-2-13. The luminaire shall be EMI/ EMC compliant and shall have a internal surge protection of 4 KV. The luminaire shall have Class-1 Electrical insulation, Class-B serviceability .The luminaire and driver shall be BIS approved, complete all as specified and directed.Make : Philips/ Bajaj / CG/Havells. |
| 158 | Supply and fixing in repair building security/ LED street light fitting 35/36 Watt, 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal, management in multiple optics complete, with IP 65/66 protection complete all as specified and directed. Make: Philips/Bajaj/CG |
| 159 | M&L for sub main wiring with PVC insulated unsheathed FRLS cable 1100 volts grade multi stranded copper conductor cable 2 runs of 6 Sqmm drawn through in and incl suitable size surface PVC casing caping/PVC Conduit and all accessories fixed to wall/floors along with 6 Sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly including taking down existing sub main wiring of any size complete all as specified and directed.Note: (a)2 runs of 6 Sqmm cable along with one run of 6 Sqmm cable for earth conductor shall be measured as one lengthMake:- Havells/ Polycab/ Plaza. |
| 160 | Supply and installwater heater storage type (Geyser) vertical of capacity 25 Ltr, suitable for high pressure up to 8 barpowder coated metal body, temperature indicating dial , glass line coated tank, magnesium anode,efficient long life copper heating element, wattage 2 KW electrically operated, AC 230 Volt, BEE5 Star Rated with complete fittings/partsand accessories for fixing on wall/surfaceall as per site requirement andspecified anddirected Make:- Bajaj / Racold / Havells |
| 161 | Supply & fix metal clad switch socket single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20A concealed in walls complete all as specified and as directed.Make : Havells/ Indo asian/ Legrand |
| 162 | S & F in repair MCB single pole 240 volts 6 to 32 Amps suitable for \"C\" curve, 10 KA complete including taking down old unserviceable fitting complete all as specified and as directed.Make : Legrand/ L&T/ Indo Asian. |
| 163 | Material and labour for Spreading ribbed soil in trenches as in cable cushioning all as per IS 1255-1983, complete all as specified and directed.Note :- (i)Excavated approved soil shall be ribbed by using sieve to separate composite particles etc. as per IS and refilling in trenches before laying of cable 8 CM and 15 CM after laying of cable. This is then gently punned down to a depth of 10 cm above the top of upper most cable (ii) For the purpose of measurement only punned thickness shall be considered for payment. |
| 164 | Material and labour for well burnt bricks ‘B’ class as mechanicalprotection to under ground cables laying with length of the bricks equal to the width of the trench, complete all as specified and directed. |
| 165 | Material and labour for Cutting existing road/PCC/Drain for laying of GI or any type of pipe including necessary earthwork, excavation exc 600mm depth but not exc 1mtr depth, 800 mm wide including making good existing surface with 150 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate, complete all as specified and directed. Note :-The tenderer shall take into consideration for following points while quoting rate for this item andthe unit rate is deemed to be inclusive for :-(i) Earth work and excavation in any type of soil(ii) Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick ,complete all as specified and as directed.(iii) Removing excavated material out side MD land.(iv)Laying of any type/any bore of pipe in trenches including taking down existing unserviceable pipe. Supply of pipe shall be measured and paid separately(v)150 mm thickPCC 1:2:4 type B1 using 20mm graded stone aggregate as inroad to make good existing disturbed surfaces. |
| 166 | Supply only of GI pipe light grade for cable protection of size 50mm bore with fittings, complete all as specified and directed. |
| 167 | Material and labour in repair for 3 ½ core 35 Sqmm XLPE insulated heavy duty electric cable with aluminium multi stranded conductor 1100 volts grade served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall sheathed laying in trenches/cable ducts, fixed to wall/pole, complete all as specified and directed. Make : Havells, Polycab, RPG Asian |
| 168 | Supply, installation testing and commissioning of factory made meter panel board of suitable size for wall mounted/floor mounted made out of CRCA sheet of 2mm thick indoor type totally enclosed weather proof dust vermin proof with front openable hinged door locking arrangement mounted on MS Clamp welded to panel body duly grouted in wall including provision of transparent acrylic sheet for meter reading space for refixing of KWH meter 07 Nos, and VTPN DB - 01 Nos,incl lugs, space for mounting channels rubber gasket looking knobs PVC shrinkable sleeves, nut bolts washers etc epoxy powder coated spray paint with primer CPRI type tested complete all as directed and as specified. Note :- Old existing KWH meter carefully after disconnecting the incoming and outgoing electric wire connection, keeping in the safe custody including recorded the Ser No , Qtr No, and meter reading refixing back at site in the new panel board and connecting the electric circuit all as specified and directed |
| 169 | Supply, installation, testing & commissioning of maintenance free chemicalearthing system comprising of 17mm dia copper bondedrod 3 mtr long horizontally pre welded T-terminal rod with provision for connection size of 50 x 150mm long, 6mm thickness with equal space either side, with 12mm dia hole of 02 numbers each on either side of the terminal clamp with 250 microns (average) coating thickness, tested and certified by CPRI India alongwith 50 Kg earth energizer compound and 10 litres earth resistance reducingliquid. The earthing energizer compound and resistance reducing earthing liquid shall be tested as per IEC-62561-7 read with ASTM G57-06, CI 3.4 A by any NABL accredited lab. The above mentioned rod shall be installed in 4-6 inch bore, 12 feet depth with a distance of minimum 3 meters between each installation, complete all as specified and directed..Make : Model HTSP 317 of safeTrode or equivalent in Snaga/ Cubes 6 Global |
| 170 | The quoted rate shall also deemed to be included the following :- (i)Prior toinstallation of maintenance free chemicalearthing, soil resistivity test to be carried out at the location where earthingwork to be donein presence of Engr-in- Charge/JE (E/M),user and the report has tosubmitto Garrison Engineer with recommendation of manufacturer, if required additional interconnection ofearthing (not more than 08 number of earthing) to achive earth result less then 1 Ohms. The arrangement done for soil resistivity testingandsubmission of report with recommendationdeemed to be included in the quoted rate. |
| 171 | (ii) The description/ size/ qty of items mentioned in above are for indicating only however qty/ size may vary at site condition to maintain the earth resistance 1 ohm. The contractor shall quote rate by considering all factors. |
| 172 | (iii) Rateofearth energizer compound of 25 Kg of 02 bags and earthresistance reducingliquid 10 litre per cane for each pit deemed to be included in the quoted rate. |
| 173 | (iv)Resistivity of earth energizer compound and resistance reducing earthing liquid shall be certified by any NABL accredited lab carried out as per IEC-62561-7 read with ASTMG57-06, CI-3.4A and the certificate of same shall be submitted by the contractor along with the sample approval |
| 174 | (v) Earth enhancing material should not leach into the adjacent soil or underground water channels and its PH value should be in neutral range complete all as specified and as directed. It should solidify when mixed with water and set like concrete. |
| 175 | (vi) Copper strip of size 20 x 3 mm shallbe fixed on proper post insulator at the instrument end (copper strip upto 7.5 RM shall be considered in unit quoted rate and extra will be measured and paid separately). |
| 176 | (vii)Testing of earth shall be carriedout in presence ofdepartmental and user representativeand report shall be submitted to Garrison Engineer duly signed by all concerned. |
| 177 | (viii)Earth resistance tester will be provided by the contractor.Tester should be calibrated from authorised company/ lab. |
| 178 | (ix)Earthing shall be tested after completion of work by the contractor in presence of Engr-in-charge, user and proper record shall be maintained duly signed by all concerned.After testing if the desired earth resistance of less than 1 Ohm is not obtained, the earthing will be redone at no extra cost to Govt. till desired result is obtained. |
| 179 | (x) The contractor shall give a written guarantee of minimum three years for maintaining the earth resistance less than 1 Ohm after certified date of completion. |
| 180 | (xi) No further maintenance or periodic watering or recharge shall be required in earthing during its guarantee period of over 03 years in all type of soil including soft/ disintegrated or hard rock. |
| 181 | (xii) During the guarantee period, if earth resistance is not maintained less than 1 ohm the contractor has to redo or rectify at no extra cost to Govt till desired result is maintained. |
| 182 | (xiii) A security deposit of value equal to 2.5 % of the rate quoted for chemical earthing for each earthing shall be retained from payment due to the contractor from final bill for the guarantee period. |
| 183 | (xiv) The electrode shallcarry manufacturer\"s name . |
| 184 | (xv) The connection clamp shall be permanentlly welded to the copper boundedrodto avoid any kind of connectivity loss,.The pre-welded copper bounded rod shall not need any additional clamp for termination. |
| 185 | (xvi) The acceptable earth resistance at earth busbar/ test point shall not be more than 0.1 ohm. |
| 186 | (xvii)Earth work such as auguring andmaking good the surrounding area shall carried out in any type of soil. |
| 187 | (xviii)The contractor shall submit CPRI India certified document for copper bounded rod to ensure genuineness of material. |
| 188 | (xix) Sign boardof mild steel sheet 2 mm thick duly painted with two coats of synthetic enamel paint over a coat of red oxideZinc chrome primer showing result of earthing shall be fixed near the earth pit after completion as directed by engr -in- charge. |
| 189 | M&L in repair Earth pit cover madeof heavy duty poly plastic of high grade polypropylene tested and certified by any NABL accredited lab for load bearing capacity not less than 7.2 tonnes with top dia not less than 250mm, bottom dia not less than 330 mm and height not less than 260 mmfor each electrode pit, complete all as specified and directed. |
| 190 | S&F in repair copper strip 20 x 3mm thick as earthing lead fixed to wall/roofs etc, complete all as specified anddirected. Note : - All Joints should be joined by Exothermic Welding or Brazing. |
| 191 | Note :- An amount of Rs 56,375.00 on account of credit schedule for schedule \"A\" part II shall be deducted from the total amount of BOQ to arrive at the contract sum. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail