Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Note : In case description of any two or more items of the schedule ‘A’ is same and the tenderer quotes different rates for such items, only lowest rate of such items will be considered for acceptance and subsequently payment will be made upon execution of the items accordingly. |
| 2 | Dismantling floor/wall tiling including cement mortor bedding (but not backing) removing of unserveable tiles from site and rubbish of the premises. |
| 3 | M & L for Plain Cement concrete type B-0,1:2:4(12.50 mm graded aggregate) 25mm thick complete all as specified and directed. |
| 4 | M&L for 15 mmm thick screed bed or bedding layer in CM 1:6 as in base to floor finish. |
| 5 | M&L Vitrified Ceramic light coloured tiles 9 to 10 mm thick area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match joint free. |
| 6 | -Ditto- all as per item above here-in-before but as in vertical surface such as skirting etc. to match with the flooring-ditto- |
| 7 | M&L colouredNon - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.09 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match joint free. |
| 8 | M&L coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match joint free. |
| 9 | Dismantling stone slab of any description or thickness in floors approns etc laid bedded and pointed in any mortar. |
| 10 | M & L 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. Mirror polishing and edge rounded all as per specified for steps and including 20 mm thick screed bed in CM 1:6. |
| 11 | M&L for 20mm Granite (of any type) work (table rubbed and polished) including necessary moulding on edgesfixed on cup board shelves partitions holded on angle cleats , holdfasts ,rails including proper fixing arrangments with screws etc independently all as directed. |
| 12 | M&L Machine cutkota stone slab flooring 20-25mm thick over cement screedbase laid andjointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete andincluding 20 mm thick screed bed in CM 1:6. |
| 13 | M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement backing caot slurry and jointed |
| 14 | M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 as in base for wall tiling in skirting/dado all as specified. |
| 15 | M&L for coloured Glazed ceramic tiles in vertical surface 350x 250mm x 7mm or 450 X350X 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 16 | Taking down plaster on brick or stone walls, etc.including raking out joints, hacking for key, scrubbing down with water, etc. |
| 17 | M&L for 15 mm thick plastering in CM 1:6 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing including finishing the surfaces even and smooth without using extra cement |
| 18 | M&L for 15 mm thick plastering on fair faces of brick work or concrete surfaces in two layer with 10 mm thick in CM 1:6 and top 5 mm thick in CM 1:4, mixing water proofing compound at 3% by weight of cement (but excluding the cost of WPC) finished the surfaces even and smooth without using extra cement. |
| 19 | M&L for 10 mm thick plastering in CM 1:3 on fair faces of brick work or concrete surface as in ceiling including finishing the surface even and smooth without using extra cement |
| 20 | M&L for preparing new plastered surface of wall and applying 2mm thick putty finish to obtain smooth finish wall surface and applying two coat of Oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed. |
| 21 | M&L for preparing new plastered surface of ceiling and applying 2mm thick putty finish to obtain smooth finish in ceiling surface and applying two coat of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed. |
| 22 | M&L for preparing new plastered surface of wall surface and applyingTwo or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed by the Engineer-in-chargeand as per manufacturers instructions |
| 23 | M&L for complete removal of existing treatment of wall and applying 2mm thick putty finish to obtain smooth finish on old wall surface and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed. |
| 24 | M&L for complete removal of existing treatment of ceiling and applying 2mm thick putty finish to obtain smooth finish wall surface and applying two coats of distemper over a coat of primer complete all as specified and as directed. |
| 25 | M&L for complete removal of existing treatment on walls, Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed by the Engineer-in-chargeand as per manufacturers instructions |
| 26 | M&L for preparing old plastered surface of wall and applying two coats of white wash complete all as specified and as directed. |
| 27 | M&L for preparing old plastered surface of ceiling and applying two coats of white wash complete all as specified and as directed. |
| 28 | M&L for Flush/raised pointing in CM 1:4 to squared rubble masonry, coursed or uncoursed in repairs |
| 29 | Demolition of RCC Concrete of any description and in any position not otherwise specifically provided for. |
| 30 | M&L Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate ) for manhole cover slabs including necessary form work and set in CM (1:4). |
| 31 | M&L fot TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 32 | Demolition of brick work built in CM including All Quions, arches, pillars etc |
| 33 | M & L Brickwork withold size bricks using fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 |
| 34 | M & L for Pre-cast cement concrete block masonry with solid blocks, Type C11:3:6 (20mm graded aggregate) exc. 10 cm in width and setting in cement mortar 1:4, complete |
| 35 | M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 ,finished even and smooth without using extra cement |
| 36 | Cutting chases, in stone walls, pinning in, making good to facing where required and pointing in cement mortpor 1:3 for concealed water tubing and making good, cuting exc, 10 cm but n.exc 20 cm girth. |
| 37 | S&F 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified including Taking up or down steel tubing and connections including cleaning for refixing or removing to store 15 mm bore |
| 38 | S&F 25 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified including Taking up or down steel tubing and connections including cleaning for refixing or removing to store 20 mm bore |
| 39 | S&F Brass elbow 20(3/4 x 1/2)mm dia all as specified and as directed by engineer in charge |
| 40 | S&F Brass tee 20mm dia all as specified and as directed by engineer in charge |
| 41 | S&F Male Brass Threaded Adaptor 20mm dia (MTA/ MBTA) )all as specified and as directed by engineer in charge |
| 42 | S&F Female Brass Threaded Adaptor (FTA/ FBTA) 20mm dia all as specified and as directed by engineer in charge |
| 43 | S&F Tank Adaptor 25mm dia all as specified and as directed by engineer in charge |
| 44 | S&F union of size of 25mm dia all as specified and as directed by engineer in charge |
| 45 | S&F PVC connection 15 mm size with PTMT nuts of length 450 mm |
| 46 | S&F Gun metal gate valves with iron wheel head screwed both ends for iron pipe and fixed 25 mm bore |
| 47 | Dismantling water tank of capacity exc 500 & n.exc 1000 ltrs |
| 48 | Dismantling water tank of capacity exc 250 & n.exc 500 ltrs |
| 49 | S&F 1000 ltrs capacity Rotational moulded polythene water strong tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified and as directed |
| 50 | S&F 500 ltrs capacity Rotational moulded polythene water strong tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified and as directed |
| 51 | S&F in repairs Ball valves high pressure of PTMT with eppoxy coated Aluminium rod & high density plastic ball screwed for iron pipes and fixed 25 mm bore (Minimum weight 455 gms) |
| 52 | Demolition and breaking up of AC/PVC drain pipes 100 mm dia set in CM |
| 53 | S&F 150 X150 mm Salt-glazed stone ware gully traps, square, type \"P\" |
| 54 | S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed. |
| 55 | S&F PVCin repairs (SWR) floor trap diameter of out let 75 mm ,plain with grating including jointing with solvent cement fixed in cement concrete all as specified and directed ,(cement concrete shall be measured and paid seperately. |
| 56 | S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed. |
| 57 | S&F 110 mm bore PVC (SWR) bends any radiuis all as specified and as directed |
| 58 | S&F 110 mm bore PVC (SWR) bends with access door any radiuis all as specified and as directed |
| 59 | S&F PVC (SWR) pipes single socketed,in any length with rubber ring joints, fixed to walls bore of the pipe 110 mm in repairs |
| 60 | S&F PVC (SWR) pipes single socketed,in any length with rubber ring joints, fixed to walls bore of the pipe 75 mm in repairs |
| 61 | S&F 75 mm bore PVC (SWR) bends any radiuis all as specified and as directed |
| 62 | S&F 75 mm bore PVC (SWR) bends with access door any radiuis all as specified and as directed |
| 63 | S&F 110 mm bore PVC (SWR) junction single, (single T) all as specified and as directed |
| 64 | S&F 110 mm bore PVC (SWR) junction single, (single T) with access door all as specified and as directed |
| 65 | S&F 75 mm bore PVC (SWR) junction single, (single T) all as specified and as directed |
| 66 | S&F 75 mm bore PVC (SWR) junction single, (single T) with access door all as specified and as directed |
| 67 | M&L for cutting holes in stone masnory built in cement mortor and making good in CM 1:3 or in cement concrete 1:2:4 tupe B1 as required superficial area exc 150 sq cm but n.exc 400 sq cm |
| 68 | Supply and fix in repairs Vitreous china premium/ 1st quality one piece flora floor mount western commode for bath room made of ceramic with S-220 Trap of star white colour oval shape floor mount EWC of included components of flushing fitting in fitted condition ,wax ceal,floor fixing screws,seat coverof model No Hindware 2010731SW_1 or similar type complete in all respect all as specified and directed. |
| 69 | S&F in repairs vitreous china squatingpan orrissa pattern size 580 x 440 mm white with integral foot rest, including 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of polythene of loe or high density or PVC 32 mm dia, , closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hanging device, complete all as specified and as directed. |
| 70 | S&F Continental wall hung basin of size 560 x 415 x 200 mm with full pedestal with fixing accessories of Jaquar Code: (CNS- WHT-801+CNS-WHT-301) |
| 71 | S&F Brass CP mixer as pillar taps for mixing hot & cold water screwed down for iron pipe and fixed for dia 20 mm all as specified and as directed |
| 72 | S&F stainless pressed single bowl sink ,single drain board with waste couplingstainless steel AISI 304 grade 18/8 Stainless Steel for rust proof, over all size 1040x508x250 with small bowl size 508 mm X 406mm X 254 and PVC waste pipe of 38 mm bore and 1.0 m long complete all as specified and as directed. Make : Hindware, Everado, Handmade designer sink |
| 73 | S & F for Wall Mixer with Provision for overhead Shower with 115mm Long Bend Pipe on Upper Side, Connecting Legs & Wall Flanges complete all as specified and as directed. Make :-Jaquar Code No CQT-CHR-23273UPR |
| 74 | S/F CP Angular stop cock 15mm Mk: Jaguar Cat No :CQT-CHR-23053 |
| 75 | S & F in repairswhite Toilet paper holder with flat recessed type stainless steel with brass chromium plated stainless steel screwsComplete all as specified and directed |
| 76 | S & F Chromium plated two way bib cock with flanges. Mk Jaguar Cat No DRC-CHR-37041 |
| 77 | M&L for chromium plated bib taps fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed |
| 78 | S & FBrass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed in repairs |
| 79 | S & F Soap dish holder Mk : Jaguar cat No AKP-CHR-35731 |
| 80 | S&F brass coat hooks, solid body, 175mm to 250 mm all as specified by Engineer-in-charge |
| 81 | M&L 600mmx450mm bevelled edge frameless mirror of selected quality glass,wixed with chromium plated brass screws and cup washers. Make: Saint gobin or modi guard ultra mirrors or equivalent as approved by GE |
| 82 | S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 83 | S&F cornner glass shelf of size 9\"*9\" shelf and frond,circle in design fixed over chromium plated brackets of heavy duty with frond linings with glass fixed in wall with necessary screws make Jaquor ACN CHR 1173 |
| 84 | S & F single flow over head shower 100mm diachromium platedfancy type bottom with rubber holes all as specified and directed fixed in repairs Make-Jaquor code OHS-CHR-1989 |
| 85 | S&F in repairs glass shelf 600 mm long fixed to wall cat no: 7771 of JAGUAR or equivalent as approved by GE |
| 86 | Dismantling/removing the textile coverings and cover fillets all as specified |
| 87 | Demolition of plain cement concrete of any description in any position as inpadding concrete, sunken slabs coping, benching, kerbs or mud stops etc and removing the debris outside MOD allas psecified by engineer in charge |
| 88 | M&L PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in terrace (padding layer )finished even surface complete all as specified and directed. |
| 89 | M&L for rendering 10 mm thick in CM 1:3 on concrete roof slabs including mixing water proofing compound at 3% by weight of cement (but excluding the cost of cement), finishing the surface even and smooth without using extra cement complete all as specified and as directed. |
| 90 | M&L for Providing, cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges, using water proofing compound at 3% by weight of cement but excluding the cost of WPC ( water proofing compound should be measured and paid seperately) complete all as specified and as directed. |
| 91 | M & L for cleaning the roof surface and applying oil bond bitumen primer @ 0.2 kg/sqm providing and laying 3mm thick APP modified water proofing membrane weight not less than 4kg/sqm reinforced with non woven polyester mat weighingnot less than160 gm/sqm having soften point not less than 140 degree centigrade tensile strength not less than 800 N/sqcm tearing strength 180N with minimum of 10cm side laps and 15cm end laps by application of torch applying a coat of blown grade hot bitumen over the membrane @ 1.2kg/sqm and providing garnish with solar reflective bitumen aluminium paint @ 0.1 kg/sqm over completed area of membrane complete all as specified and as directed by engineer in charge. Note: the quoted rate shall included for cutting grooves in roof parapets, upward facias, etc and inserting of membrane and making good with CM 1:3 wherever required. |
| 92 | Supply only integral water proofing compound as per manufactures instruction. |
| 93 | M & L 25mm Harrison rails, mild steel, chromium plated,stainless steel with fixing brackets, stops, rollers etc.complete all as specified and directed |
| 94 | M & L in repairs for brass chromium platedBrackets, Ends Cap and Holder suitable for 25mm dia Stainless Steel Curtain Rod fancy type complete all as specified and approved |
| 95 | S&F 3mm thick sheet glass ordinary quality frosted fixing with putty in squre n.exc 0.5 sqm in each pane |
| 96 | S&F 1st class hard wood beads, straight (any size) for glazed or guaged joinery, renewed, including mitres etc. and removing old beads. |
| 97 | S&F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stain less steel wire staples |
| 98 | Taking down chowkats with shutter ( without taking off shutters from the frame) exc 1.5 Sqm but not exc. 4 Sqmeach |
| 99 | Taking down shutters of any description exc 1 sqmand n.exc 2 sqm each |
| 100 | S & F for Pressed steel frames (size 125x60mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed complete all as specified and directed. |
| 101 | S & F for Pressed steel frames (size 105x60mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed complete all as specified and directed. |
| 102 | M&L for PCC 1:3:6 type B1 (using 20 mm graded stone aggregate) as in cills, copings, apex stone, bed plates kerbs levelling course including waethering, slightly rounded or chamfered angles and throating as directed including mixing water proofing compound (but excluding the cost of WPC) as per manufacturers instrucions all as specified. |
| 103 | S&F 35 mm thick flush shutter solid core construction with black board core and ply wood face panels commercial type on both sides |
| 104 | S & F for 35mm thick 2nd class hard woodglazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded, mitred and rebated shash bars, any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part I, Section 8 , Clause 8.24 (a), supplied & fitted to chowkats. |
| 105 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40mm and fixed with stain less steel wire staples |
| 106 | Taking down chowkats with shutter ( without taking off shutters from the frame) n.exc 1.5 Sqm each incl steel windows and ventilators. |
| 107 | M&L preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer. |
| 108 | M&L preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint. |
| 109 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x52mm),sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm),Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated),steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) |
| 110 | (A) Area not exceeding 2.00 sqm each |
| 111 | (B) Area exceeding 2.00 sqm each |
| 112 | S&F Sheet glass, ordinary quality 4.8mm thick and glazing with rubber to UPVC frame in square/rectangleexc 0.5 sq. m in each pane all as specified and as directed |
| 113 | S&F Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. |
| 114 | S&F frosted Sheet glass, ordinary quality 4.8 mm thick and glazing with rubber to UPVC frame in square/rectanglen exc 0.5 sq. m in each pane all as specified and as directed |
| 115 | S & F in repairsFramed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed. |
| 116 | M&L Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete |
| 117 | M&L Preparing Old steel surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete |
| 118 | S & F in repairs Solid PVC Door Frame of size 50mm X 47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed shee directed by Engineer-in-Charge. |
| 119 | S & F in repairs Factory Made Solid PVC Moulded Door Shutter,with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face supplying & fixing in frame at site as per specification & drawing as directed by Engineer-in-Charge. |
| 120 | S&F 100 mm long MS butt hinges, medium weight cold rolled. |
| 121 | S&F 150 mm long aluminium anodised barrel tower bolt of extruded section |
| 122 | S&F 100 mm long aluminium anodised barrel tower bolt of extruded section |
| 123 | S&F 150 mm longextruided aluminium alloy handles fabricated type anodised, |
| 124 | S&F 300 mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type ) and fixing clips of cast or extruded section and fixing bolts and sliding blots of extruded sections or cast aluminium alloy. |
| 125 | S&F 150 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor |
| 126 | S&F mild steel 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete |
| 127 | Dismantling of wall boards (fibre, Pulp, insulation, plywood etc.) as in cup boards, shelve, pelmet boxes etc. |
| 128 | M&L for 25 mm thick Medium density fibre board exterior grade complete all as specified and as directed by Enginner-in-Charge. |
| 129 | M&L for 12mm thick Medium density fibre board exterior grade complete all as specified and as directed by Enginner-in-Charge. |
| 130 | S&F Decorative laminate 0.9mm type 1 of surface finish glossy, colour and pattern as approved, fixed with approved adhesive as per manufacturer\"s instruction |
| 131 | S&F soft closer telescopic drawer channel of any lengthof bearing 45kg capacitywith 100% extension strong and smooth operation for wooden and metal drawers in kitchen,ward robe etc as per requirement allas specified and as directed. Make : Godrej or equivalent |
| 132 | S&F stainless steel bright chromium plated cabinet & drawerhandle6\" long all as specified and as directed by engineer in charge Make : Hettich or equivalent |
| 133 | S&Fcabinetauto hinges soft close 4 hole full over lay suitable for 14-25 mm thick panel with 105 degree opening suitable for as in kitchen drawers and cupboards. all as specified and as directed by engineer in charge Make :Godrej , Hettich or equivalent |
| 134 | S&F stainless steelmodular kitchen baskets any size/any type fixing all as specified and directed by engineer in charge. all as specified and as directed by engineer in charge |
| 135 | S&F magnet catcher for cupboard all as specifie and as directed by engineer in charge |
| 136 | S & F in repairs Stainless Steel plate rack of size 910 mm X 960 mm of super deluxe model, suitable for 12 plates made with 22 gauge sheet and weight not less than 5.5 Kg, completeall as specified and as directed. |
| 137 | Demolition ofplain cement cement concrete/terrazo tiles with cement mortor bedding in ground floors and pavings n.exc 15 cm thickness (below or above ground level) and removing the debris outside MOD land all as specified by engineer in charge |
| 138 | M&L for cement concrete 1:4:8 , type D-2 using 40 mm graded stone aggregateas in fdn , filling and mass concrete complete all as specified and directed . |
| 139 | M & L for Plain Cement concrete type C-2 1:3:6using 40mm graded crushed stone aggregates 75mm thick as in plinth protection, hard standing, floor finish complete all as specified and directed. |
| 140 | M&L for 75 mm thick PCC 1:3:6 type C-2 (40 mm graded aggregate) as in sub base all as specified and directed |
| 141 | M&L for 40 mm thick PCC 1:2:4 type B-1 (20 mm graded aggregate)as in floor all as specified and directed, finishing cement concrete as in floorsfinished even and smooth without using extra cementand spike rolling to surfaces or making impressions of expanded metal,whilst the concrete is greenall as specified and directed |
| 142 | M & L 20cmx20cmx25mm/30 cmx30 cmx25 mm thick chequerd cement concrete tiles grey cement with pigment set and jointed in neat cement slurry including 15 mmm thick screed bed or bedding layer in CM 1:4 as in base to floor finish. |
| 143 | Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement& marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. |
| 144 | Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) |
| 145 | M&L Anti termit treatment Of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors |
| 146 | M&L antitermite treatmentAt points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed |
| 147 | S&F steel work in TubularRoof trusses,trussed,purlins, rafters including special shaped washer etc complete using ERW or induction butt weldedtubes confirmingto I.S11611979 grade st 240 |
| 148 | S&F Pre-painted galvalume aluminium zinc coating corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 149 | Dismantling plain or corrugated steel sheeting,any gauge, thickness,including nanital orsimilar pattern roof coverings. |
| 150 | Overhauling of sliding steel door/rolling shutternot exceeding 12 sqm gear/hand completely including loosening/ tighening any type of hinges and gresing/oilingthe top and bottom all as directed. |
| 151 | Dismantling wrought iron or mild steel work of any description not otherwise provided |
| 152 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories &stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. |
| 153 | Excavation in post holes(or similar holes) each n. exc 0.5 Cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers n. exc exc 25 cm watering and removing surplus soil to a distance n exc 50 m and making good surface as in soft/loose soil all as specified and directed |
| 154 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft/loose soil |
| 155 | M&L for cement concrete B1 1:2:4 (20 mm graded aggregate) in lintelsplinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stonesbed plates, as and mass concrete all as specified and directed |
| 156 | S&F Rolled mild steel in Rooftrusses (framed), trussed, purlins, crane gantries, rails andfastenings and heavy bracket framing(Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe 410-W (GdeE- 250) quality A |
| 157 | S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe-410 W (Grade E-250) quality A. |
| 158 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws asin ridges, hips, valley gutter, drip, and straight flashing all as specified and as directed. |
| 159 | S&F aluminium flat 40 X 6mm size as wind tie fixed with 50mm/75mm aluminium self staging screws. |
| 160 | M&L for hard core of gauge n.exc. 63mm deposited spread and levelled in layers n.exc. 15 cm thick watered and rolled / rammed to a true surface. |
| 161 | M& L Machinepressed precast concrete interlocking paver block any shapeand size confirmingtoIS 15658-2006 of 60 mm thickness,M-35 Grade with grey cement and pigment complete all as specified and directed. |
| 162 | M&L Sand filling under floors or in foundations including watering and consolidation |
| 163 | M&L for 75mm thick PCC(1:2:4) type B-1 (using 20 mm graded stone aggregate)as in floor/hard-standing finished even and smooth without using extra cement complete. |
| 164 | M&L granite or trap Stone kerb of roughly squared stones of size 20cm x 30cm,dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in cement mortar 1:6 and struck flush |
| 165 | Removing excavated materialexc. 250m but n exc 500 m and depositing where directed at a level n exc. 1.5 m above the starting point |
| 166 | Demolition of ashlar facings,dressed stonework, precast concrete articles andprecastconcrete block walling work built in CMetc |
| 167 | M&L for preparing the surface of stone masonary/ concrete/Plasteredsurfaces which includes cleaning,sanding and filling any imperfections to create smooth dry base and applying primer to enhance adhesion and durability as per manufactures instructionsand applying 2 coats ofthin even coats exteriorPU magnum/Aqua water proofing coating/ paint using spray gun ,brush or roller allowing each coat to dry completelyon old surfaces complete all as specified and as directed by the Engineer-in-chargeand as per manufacturers instructions |
| 168 | S & F Factory made single extruded WPC(Wood Polymenr Composite) solid door/window/Ceosetory windows and other Frames/chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk)and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated witgh miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame densityy of 750 kg/cum, screw withdrawal strength of 2200 N (Face) and 1100 N (Edge), miimum compressive strength of 58 N/mm2, modules of elasticity 900N.mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of requred dia and length complete as per direction of Engineer-in-charge. (M.S hold fast/lugs or SS dash fasteners shall bne paid for separately) manufacturers instructions and as directed by Engineer-in-Charge. |
| 169 | S&F Factory Made single extruded WPC (Wood polymer composite) solid decorative type flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powedr/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face ) and 900 N (Edge), minimum compressive strength 50 N.mm2, modulus of elasticity 850 N.mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hings of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-Charge. |
| 170 | M&L for PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in cills, copings, apex stone, bed plates kerbs levelling course including waethering, slightly rounded or chamfered angles and throating as directed including mixing water proofing compound (but excluding the cost of WPC) as per manufacturers instrucions all as specified. |
| 171 | M & L for Plain Cement concrete Cementconcrete type B-0, 1:2:4 (12.50mm graded aggregate)50mm thick as inhard standing, floor finish complete all as specified and directed. |
| 172 | M & L for preparation of new plastered surfaces of walls and applying two coat of oil bound distemper all as specified and directed. |
| 173 | M & L for preparation of old distempered surfaces and walls and applying one coat of oil bound distemper all as specified and directed. |
| 174 | Cutting holes in brick walls/PCC block masory built in cement mortar exc ½ bricks but not exc one brick thick for inserting hold fasts and making good dismantled portion in CM (1:3) or cement concrete 1:2:4, type B-1 as required, depth of embeded portion of hold fasts measured from face of the jombs. |
| 175 | S & F rolled mild steel in Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steelsheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete confirm to Fe- 410-W. |
| 176 | S & F 125 mm long MS butt hinges medium weight cold rolled and fixed. |
| 177 | S & F 200 mm long MS barrel tower bolts, stove enamelled black, with bright bolt and fixed. |
| 178 | S & F 150 mm long MS pressed handle, oval shape, stove enamelled black. |
| 179 | S&F Mild steel, plain, black sheet 1 mm in wall cladding,steel gates and similar work, cut to size, hole punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain40 mm lap jointwith riveted or welded seams, including bending or turning up, mitredangles, etc. as required |
| 180 | M&L Plywood of 6 mm thick , grade BWR, type BB,fixed withscrewsto iron frame work |
| 181 | M&L Cover fillets of thickness 6mm standardhard board, 40mm wide, and fixing withscrews |
| 182 | M&L Brass Mortice night latch 2 levers ofsize 65 mm to be fixed on steel doors |
| 183 | S&F Mild steel sheet eaves gutters of dia 150 mmthickness of sheet 1.25 mm , galvanised class 3, half round with rounded edges |
| 184 | S&F powdercoated aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 185 | S&F Poweder coatedaluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges anodised aluminum snap beading screws etc. complete all as specified |
| 186 | S&F Sheet glass, 5.50 mm ordinary quality and glazing with oil putty in square in exc 0.5 sq.m in each pane |
| 187 | Supply and fixing for Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers |
| 188 | Taking down carefullycopper/ aluminium point wiring (light, fan, socket or power) complete, including fittings & fixtures such as switches with board, ceiling roses, pendents, bell, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good disturbed surfaces of walls, floors etc. including paint touch up to match with the existing surface complete all as specified and as directed by the Engineer-in-charge. |
| 189 | Taking down unserviceable MCB DBs, Metal clad DBsalong with MCBs of any description and making good the disturbed surfaces of walls to match with existing sorrounding wall finish complete all as specified and as directed by the Engineer-in-charge. |
| 190 | Taking down unserviceable Security light of any description including service bracket, clamps nut bolts etc,. |
| 191 | Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable, with multi-stranded copper conductor cable, 1100 volts grade, drawn throughand including non metalic medium grade, rigid PVC conduit with all conduit accessories, provision of 1.5 sq mm PVC insulated copper cable FRLS as earth continuity conductor, company fabricated GI sheet steel terminal box suitable for Modular switches concealed flush to walls with front cover & base frame, screws, suitable for housing modular switches, socket outlets, fan regulators etc, all as specifiedand as directed for the following:- |
| 192 | (a) Onelight pointcontrolled by one one way switch . |
| 193 | (b) Onelight pointcontrolled by one two way switch . |
| 194 | (c) One ceiling fan point controlled by one one wayswitch. |
| 195 | (d) One Exhaust fan point controlled by one one wayswitch. |
| 196 | (e) One 3 pin socket outlet 5 Amps on the same board with other switches. |
| 197 | (f) One 3 pin socket outlet 5 Amps on the Independent board. |
| 198 | (g) One bell/buzzer point controlled by one push button on the same board with other switches or independent. |
| 199 | All as per item No. 188 here-in-before but with 4.0 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 4.0 Sq mm copper conductor green in colour as earth continuity conductor complete all as specified and as directed by the Engineer-in-charge. |
| 200 | M&L for Modular switch 6A, 1 way.Make :Anchor/ Havells/ Legrand/ Crabtree |
| 201 | M&L for Modular switch 6A, 2 way. Make :Anchor/ Havells/ Legrand/ Crabtree |
| 202 | M&L for Modular switch 16A, 1 way. Make :Anchor/ Havells/ Legrand/ Crabtree |
| 203 | M&L for Socket outlet 6A modular. Make :Anchor/ Havells/ Legrand/ Crabtree |
| 204 | M&L for Socket outlet 16A modular. Make :Anchor/ Havells/ Legrand/ Crabtree |
| 205 | M&L for switch bell push modular. Make :Anchor/ Havells/ Legrand/ Crabtree |
| 206 | M&L for Stepped type fan regulator(4steps), 120 W- 2 modular. Make :Anchor/ Havells/ Legrand/ Crabtree |
| 207 | S&F Electric bell/ buzzer 230 volts, single pole, 240 V. Make :Anchor/ Havells/ Legrand/ Crabtree |
| 208 | S&F ceiling rose, 3 terminal, PVC/Polycarbonate isolated body. Make :Anchor/ Havells/ Legrand/ Crabtree |
| 209 | M&L for Lamp holderPVC/ Polycarbonate type with back plate suitable for batten fittings. Make :Anchor/ Havells/ Legrand/ Crabtree |
| 210 | S&F LED Bulb Pin type of 9 Watt complete all as specified and directed. |
| 211 | M&L for Modular Telephone socket. Make :Anchor/ Havells/ Legrand/ Crabtree |
| 212 | M&L for Modular TV socket.Make :Anchor/ Havells/ Legrand/ Crabtree |
| 213 | Point wiring complete with two runs of 1.5 sq mm single core PVC insulated FRLS cable1100 volts grade with multi-stranded copper conductors, drawn throughand including non metallic med. grade rigid PVC conduit with all conduit accessories, and including provision of 1.5 sqmmPVC insulated FRLS copper cable as earth continuity conductor, fabricated steel teminal box made out of 1.60 mm thick MS sheet concealed in walls and covered with 3 mm thick hylum sheetfor fixing the switches / sockets/ regulators etc. all as specified and directed for :- |
| 214 | (a) Onelight pointcontrolled by one way switch . |
| 215 | (b) One ceiling fan point controlled by one wayswitch. |
| 216 | (c) One 3 pin socket outlet 5 Amps on the same board with other switches. |
| 217 | (d) One 3 pin socket outlet 5 Amps on the Independent board. |
| 218 | S&F Switch piano flush type 5/6 Amps single pole one way230 Volts. Make : Anchor / Havells/ Legrand/ Crabtree. |
| 219 | S&F Socket Outlet 2 in 1, 3 pin 5 Ampsflush type 230 Volts. Make :Anchor/ Havells/ Legrand/ Crabtree |
| 220 | S&FStepped type electronic fan regulator flush type on laminated sheet for1200 mm sweep fans complete all as specified and directed. Make :Anchor/ Havells/ Legrand/ Crabtree |
| 221 | M&L for rigid non- metallic PVC conduit inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, sadles, pipe hooks etc. of size 20 mm dia for Tele & TV points. |
| 222 | S & F in repairs, wall mounted 10W LED 6Klight fitting, 2\"with extruded Al , heat sink, integral driver, energy efficient, ready to use pack etc, complete with all accessories internally pre wired and fixing the same on and including two Nos, PVC Block and Connecting up with twin core twisted flexible copper conductor cable of suitable size up to ceiling rose including taking downold one, all as specified and directed by Engineer - in - Charge.Make: Havells, Model LUMILINEBS10WLED865SPCWH or equivelent in Philips/CG. |
| 223 | S & F in repairs, wall mounted 22W LED 6Klight fitting, 4\" ultra slim, with extruded Al , heat sink, integral driver, energy efficient, ready to use pack etc, complete with all accessories internally pre wired and fixing the same on and including two Nos, PVC Block and Connecting up with twin core twisted flexible copper conductor cable of suitable size up to ceiling rose including taking downold one, all as specified and directed by Engineer - in - Charge.Make: Havells, Model LUMILINEBS22WLED865SPCWH or equivelent in Philips/CG. |
| 224 | M&L for Taking down ceiling fan of any description, sealing cable ends, dismantling blades, cleaning all dust, applying grease, filling cavaties with fillet, including reassembling blades andhanging ceiling fan and connecting up including provision of cable from ceiling rose to connector of fan all as specified and as directed. |
| 225 | Dismantle the unserviceable rubber bush with clamping set, supply and fixrubber bush with clamping set, GI bolt, nut and split pin complete all as specified and as directed by the Engineer-in-charge. |
| 226 | Taking down the electric Geyser of capacity 25 ltrs/ 50 ltrs carefully from its installed position by disconnecting inlet and outlet water pipes, electrical connections,taking out the inner leaking copper tank, brazing the leaking portion of copper tank,Cleaning the Storage tank, testing for leaks, re-assembling the geyser including provision of additional glasswool as required,including replacing the rusted nut bolts, u/s inlet / outlet water pipes, u/s indicator red & green, u/s geyser element upto 3.0 KW, testing, refixing in its original position and reconnecting the inlet/ outlet water pipes and testing on completion,complete all as specified and directed by the Engineer-in-charge. |
| 227 | Sub main wiring complete with two runs of 6.0 Sqmm single core PVC insulated FRLS cable, 1100 volts grade, multi-stranded copper conductor cable with one run of 6.0 Sqmm single core, PVC insulated FRLS cable, 1100 volts grade, multi-stranded copper conductor cable as earth continuity conductor, drawn through and including suitable size of non-metallic rigid PVC conduit and conduit accessories concealed in any type of wall including stone masonry, floors / fixed to ceiling etc. all as specified and as directed. NOTE: Two runs of 6.0 sqmm cable conductor, one run of 6.0 sqmm earth continuity conductor cable and one run of PVC conduit shall be measured as one unit length. |
| 228 | All as per item No. 213 above but with 2x4.0 Sqmm + 1x4 Sqmm complete all as specified and as directed by Engineer-in-charge. NOTE: Two runs of 4.0 sqmm cable conductor, one run of 4.0 sqmm earth continuity conductor cable and one run of PVC conduit shall be measured as one unit length. |
| 229 | All as per item No. 213 above but with 2x1.5 Sqmm + 1x1.5 Sqmm complete all as specified and as directed by Engineer-in-charge. NOTE: Two runs of 1.5 sqmm cable conductor, one run of 1.5 sqmm earth continuity conductor cable and one run of PVC conduit shall be measured as one unit length. |
| 230 | All as per item No. 213 above but with 4x10.0 Sqmm + 2x10.0 Sqmm complete all as specified and as directed by Engineer-in-charge. NOTE: Four runs of 10.0 sqmm cable conductor, two runs of 10.0 sqmm earth continuity conductor cable and one run of PVC conduit shall be measured as one unit length. |
| 231 | Providing suitable hole in stone masonary wall including taking douwn andrefixing of Exhaust fan of 230 mm sweep and repair to the wall to give smooth finish as existing to the disturbed surface of wall all as specified & as directed. |
| 232 | S&F MCB distribution board sheet metal powder painted Single pole & Neutral enclosre with a two pin and earth plug and socket, one single pole MCB of 20 Amps complete all as specified and as directed by the Engineer-in-charge. Make-Havells/Legrand/Schneider |
| 233 | M & L for sheet metal enclosure for vertical distribution board when MCCB for in coming and MCBs for out going to be used VTPN 4 way , 415 volts double door complete including all as specified and as directed. Note :- MCCB and MCB will be measured and paid separately under relevant items. |
| 234 | S&F MCB distribution board double door type, SPN 8 way sheet steel powder painted with bus bar neutral link earth bar etc. Make-Havells/Legrand/Schneider |
| 235 | S&F MCB distribution board double door type, SPN 4 way sheet steel powder painted with bus bar neutral link earth bar etc. Make-Havells/Legrand/Schneider |
| 236 | S&F MCCB 3 pole, 415V, fixed type, 63 Amps with breaking capacity 16 KA complete all as specified and as directed by the Engineer-in-charge.Make-Havells/Legrand/Schneider |
| 237 | S&F MCB SPN 40 Amps, 240 voltssuitable for fixing in MCB DB \"C\" series complete all as specified and as directed by The Engineer-in-charge. Make-Havells/Legrand/Schneider |
| 238 | S&F MCB SP 5 to 32 Amps, 240 volts,suitable for fixing in MCB DB \"C\" series complete all as specified and as directed by The Engineer-in-charge. Make-Havells/Legrand/Schneider |
| 239 | Supply and fixingLED street light fitting 35 Watt 230 V AC outdoor type with high pressure diecast aluminium housing and heat resistent complete with driver, lampbracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. Make-Havells equivalent in Philips/CG |
| 240 | M&L for Earthing complete with galvanised cast iron steel earth plate electrode of size 600mm x 600mm x 6mm thick burried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the earth plate not less than 1.5mtr below normal ground level, connected to galvanised earth leadwire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel as earth electrod with top edge of earth plate not less than 1.5 mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire protection pipe GI Light grade 15mm dia from earth plate to main switch board/panel,watring pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the earth plate, earth work in any type of soil remaining surplus excavated meterial all as required at site and specified in electrical plate No 5 of SSR part I 2009 complete all as specified and as directed. |
| 241 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers ,connecting wire and all accessories including taking down Existing exhaust fan and deposit to E&M store all as specified and as directed by the Engineer-in-Charge.Make-Havells or equivalent in Anchor/Usha. |
| 242 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter or fix using ply board, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm or nearest sweep . all as specified and as directed by the Engineer-in-Charge.Make-Havells or equivalent in Anchor/Usha. |
| 243 | Taking down carefullycopper/ aluminium sub main wiring complete for DBs , including PVC casing caping/conduite, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc. including paint touch up to match with the existing surface complete all as specified and as directed by the Engineer-in-charge. |
| 244 | Taking down MCB DBs, Metal clad DBsalong with MCBs of any description (including removing all connections ), removing materials to store for keeping in safe custody for reuse at site and making good the disturbed surfaces of walls to match with existing sorrounding wall finish complete all as specified and as directed by the Engineer-in-charge. |
| 245 | Taking down single/three phase electric meter (including removing all connections ), removing materials to store for keeping in safe custody for reuse at site and making good the disturbed surfaces of walls to match with existing sorrounding wall finish complete all as specified and as directed by the Engineer-in-charge. |
| 246 | M&L for flexible metallic conduit and fixing accessories such as couplers, lock nuts, sadles, pipe hooks etc. of suitable size for duct area |
| 247 | fixing only Sub main wiring complete with two runs of 6.0 Sqmm single core PVC insulated FRLS cable, 1100 volts grade, multi-stranded copper conductor cable with one run of 6.0 Sqmm single core, PVC insulated FRLS cable, 1100 volts grade, multi-stranded copper conductor cable as earth continuity conductor, drawn through and including suitable size of PVC casing capping (double locking type) on wall, floors / fixed to ceiling etc. all as specified and as directed. Note: - Sub main wiring obtained from Ser Item No 1.0 of this schedule shall be reused in this item. |
| 248 | Sub main wiring complete with two runs of 6.0 Sqmm single core PVC insulated FRLS cable, 1100 volts grade, multi-stranded copper conductor cable with one run of 6.0 Sqmm single core, PVC insulated FRLS cable, 1100 volts grade, multi-stranded copper conductor cable as earth continuity conductor, drawn through and including suitable size of PVC casing capping (double locking type) on wall, floors / fixed to ceiling etc. all as specified and as directed. NOTE: Two runs of 6.0 sqmm cable conductor, one run of 6.0 sqmm earth continuity conductor cable and one run ofPVC casing capping shall be measured as one unit length. |
| 249 | All as per item No. 234 above but with 2x10.0 Sqmm + 1x10.0 Sqmm complete all as specified and as directed by Engineer-in-charge. NOTE: two runs of 10.0 sqmm cable conductor, one runs of 10.0 sqmm earth continuity conductor cable and one run of PVC conduit shall be measured as one unit length. |
| 250 | Fixing only MCB distribution board double door type with MCBs, SPN 8/12 way sheet steel powder painted with bus bar neutral link earth bar including making all the connections as before and testing complete all as specified and directed as Engineer-in-charge. Note: - MCB distribution board (Including MCBs) obtained from Ser Item No 2.0 of this schedule shall be reused in this item. |
| 251 | S&F MCB distribution board double door type, SPN 12 way sheet steel powder painted with bus bar neutral link earth bar etc. Make-Havells/Legrand/Standerd |
| 252 | fixing only single/three Phase electronic meters temper proof LCD display with polycarbonate cover 415/230 V, 10-60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54 including making all the connections as before complete all as specified and directed as Engineer-in-charge.Note: - Electronic meters obtained from Ser Item No 3.0 of this schedule shall be reused in this item. |
| 253 | Supply and fix in replacement single Phase electronic meters temper proof LCD display with polycarbonate cover 230 V, 10-60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH as specified and directed by Engineer-in- Charge.Make : AE/HPL. Note:- Old meter to be diposited in AGE E/M store. |
| 254 | M&L for Point wiring complete with 1.5 sq mm single core PVC insulated FRLS cable, with multi standard copper conductors, 1100 volts grade, drawn thoroughand including stove enamelled 20 mm dia medium grade steel conduit for one light point controlled by one flame proof switchand including provisoin of 1.5 sq mmPVC indulated copper cable FRLS as earth continiuty conductor, all as specified and directed. |
| 255 | Supply and replacement in repairs, Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V.Make :M/S Shyam Switchgears / M/S Sudhir / M/S Baliga |
| 256 | Supply and fixing in repair LED light fitting 2 x 16Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with and LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and as directedMake : M/S Shyam Switchgears /M/S Sudhir / M/S Baliga as approved by GE. |
| 257 | M&L for Earthing complete with galvanised cast iron steel earth plate electrode of size 600mm x 600mm x 6mm thick burried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the earth plate not less than 1.5mtr below normal ground level, connected to galvanised earth leadwire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel as earth electrod with top edge of earth plate not less than 1.5 mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire protection pipe GI Light grade 15mm dia from earth plate to main switch board/panel,watring pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the earth plate, earth work in any type of soil remaining surplus excavated meterial all as required at site and specified in electrical plate No 5 of SSR part I 2009 complete all as specified and as directed. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
