Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Note : In case description of any two or more items of the schedule ‘A’ is same and the tenderer quotes different rates for such items, only lowest rate of such items will be considered for acceptance and subsequently payment will be made upon execution of the items accordingly. |
| 2 | Demolition of unreinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as directed by Engineer-In-Charge. |
| 3 | M&L 25 mm thick PCC(1:2:4)type B0 using 12.50 mm graded stone aggregate as in floors all as specified and directed. |
| 4 | M&L Non skid ceramic tiles (Rectified tiles) of 7 to 10 mm thick(square/ rectangular) area of each the exceeding 0.18 sqm but not exceeding 0.38 sqm,of approved 1st qualityin floors etc with screed bed or bedding layer 15mm thick in CM 1:4 in floor finishes set and jointed in neat cement slurry and pointed with white / coloured cement to match coloured tiles all as specified and directed. |
| 5 | M&L Non skid ceramic tiles of 7 to 10 mm thick(square/ rectangular) area of each the exceeding 0.06 sqm but not exceeding 0.11 sqm,of approved 1st quality in floors etc with screed bed or bedding layer 15mm thick in CM 1:4 in floor finishes set and jointed in neat cement slurry, pointed with white/colour cement to match colour of tiles all as specified and directed. |
| 6 | Dismantling floor, hearth or wall tiling including cement mortar bedding & conc (but not backing) and rubbish off the premises. |
| 7 | M&L for rendering to Stone masonry surfaces or fair faces of concrete surfaces, 10mm thick in cement mortar 1:3, scoured for fixing tiles /stone slabs in skirting/ dados etc to complete all as specified and directed. |
| 8 | M&L Glazed Ceramic tiles coloured, of size450mmX350mm/300mmX7mm thick approved 1st quality asinvertical surfaces such as skirting/ dados and risers to steps etc, set and jointed in neat cement slurry and pointedwithwhite/ coloured cement to match the colour of tiles all as specified and directed. Note: PVC tile beading to be done at external corners along the edge of the tile and the cost is included in rate quoted above. |
| 9 | Dismantling of stone slabs of any description or thickness in floors and approns etc, laid,bedded and pointed in any mortar all as specified and directed. |
| 10 | M&L 20 mm thick Granite (of any type) tiles machine cut, in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4), 15mm thick including pointing in white cement (1:2) laid and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 11 | Rounding to edge of stone slab one edge, such on in stop, cooking plateform, and other similar situationcomplete all as specified and directed. |
| 12 | Taking down Chowkhats or frames withshutters exc 1.5 sq. m nexc 4.0sqmeach complete all as specified and as directed |
| 13 | Taking down Chowkhats or frames with shutters n exc 1.5 sq. m each complete all as specified and as directed. |
| 14 | S&F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed. |
| 15 | S&F 35mm of 2nd class HW rail and style Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003(Part I), kiln seasoned and chemically pressure treated all as specified and directed by Engr-in-charge. |
| 16 | S&F 30mm 2nd class HW thick factory made skeleton shutters, open rebated and preparedto receivegauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkat complete all as specified and as directed. |
| 17 | S&F 100 mm long Butt hinges, heavy weight, cold rolled mild steel, and fixed, for flush pressed steeldoor frame complete all as directed by the Engineer-in-Charge. |
| 18 | S&F 200 mm size Aluminium tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed by the Engineer-in-Charge |
| 19 | S&F 150 mm size extruded aluminiumdoor handlesfabricated type complete all as specified and as directed by the Engineer-in-Charge |
| 20 | S&F 200mm long Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 21 | S&F mild steel helical door spring rat tail rod model including roller plate complete 300 mm long complete all as specified and as directed by the Engineer-in-Charge. |
| 22 | S&F 140 mm longfloor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and as directed by the Engineer-in-Charge. |
| 23 | M&L for Preparing New wood and wood based surfaces of any descriptionover 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primercomplete all as specified and asdirected by the Engineer-in-Charge. |
| 24 | M&L for Preparing Old wood and wood based surfaces of any descriptionover 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and asdirected by the Engineer-in-Charge. |
| 25 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 26 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 27 | S&F 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 butt hinges for WPC door frame along with strong adhesives to Brass screws for fixing complete all as specified and directed by the Engineer-in-Charge |
| 28 | S&F 150 mm size Alluminium,anodised barrel tower boltsof extruted section and fixed complete all as specified and as directed by the Engineer-in-Charge |
| 29 | S&F 125 mm size extruded aluminiumdoor handlesfabricated type complete all as specified and as directed by the Engineer-in-Charge |
| 30 | S&F factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension f uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: Gaps should be filled with silicon sealent. For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 31 | S&F factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately).Note: Gaps should be filled with silicon sealent, For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 32 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average with of aperture 1.4 0 mm and fixed with stainless steel wire staples complete all as specified and asdirected by the Engineer-in-Charge. |
| 33 | S&F 4 mm thick sheet glass, ordinary quality and glazing/tinted glass of superior quality fixed to upvc windows/al windows/ paritions/ doors fixed all as specified and directed. |
| 34 | S&F MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as directed and specified by Engr-in-Charge. |
| 35 | M&L for Preparing new steel and iron surfaces of any description over 10 cm widthor girth and applying two coats of synthetic enamel paintover one coat of red oxide primercomplete all as specified and asdirected by the Engineer-in-Charge. |
| 36 | S&F in repairs 25 mm dia Stainless steel curtain rodswith fixing brackets, End caps, stops, rollers etc.and taking down old pipe complete all as specified and as directed by the Engineer-in-Charge. |
| 37 | Taking down plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. in cement lime or cement mortar including removal of spoil/ demolished material out of the premises of the site complete all as specified and as directed. |
| 38 | M&L Rendering 10 mm thick in CM 1:3 oncelling surface, finished even and smooth with out using extra cementup to ht 6.5 m all as specified and directed. |
| 39 | M&L Rendering 15mm thick in CM 1:4 on fair faces of brickwork or concrete surfaces finished fair and even up to ht 6.5mtr all as specified and as directed. |
| 40 | M&L Rendering 15 mm thick in CM 1:6 onbrick massonry surfaces of walls, finished even and smooth with out using extra cementall as specified and directed. |
| 41 | M&L Complete removal of existing treatment on walls complete all as directed. |
| 42 | M&L for 2 coats of Oil bound distempering over a coat of primer over 3mm thick wall putty withwhite or tinted on walls complete all as specified and as directed. |
| 43 | M&L Raking out and Raised Pointing of CM 1:4 joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to courses built in Cement or cement lime mortar as in directed. |
| 44 | M&L 3 coats of white wash over a coat of primer on surfaces on ceilings complete all as specified and as directed. |
| 45 | S&F 18/19mm Block boards, grade 1 quality, exterior grade, commercial type, fixed with screws to timber frame-work complete allas specified and directed. |
| 46 | M&L 1mm thick Laminate sheet (sunmyca sheet) glossy finish any colour paste with favicol on plywood/ Block board for cabinet and cupbord, commercial type on one sides complete, as specified and directed by Engr-in-charge. |
| 47 | Extra over rates of 18/19mm thickparticle board for external teak wood lipping, 6 mm thick,fixed with nails complete all as specified and as directed. |
| 48 | S&F brass magnet for cupboard complete all as specified and as directed by the Engineer-in-Charge. |
| 49 | S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, brass polished complete all as specified and as directed by the Engineer-in-Charge. |
| 50 | S&F 100 mm size hasp and staple, hinge type aluminium anodised complete all as specified and as directed. |
| 51 | S&F Stainless steel Handle 100mm dia as directed. |
| 52 | S&F Clip on soft hinges full overlay as directed.Make : Godrej |
| 53 | Dismantling of existing PVC /RCC 500-1000 ltrs water tank complete all as specified and directed. |
| 54 | S&F 500 Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical shape with vertical top closed) hoisted and fixed in position including taking down old unserviseable water tanksall as specified and directed. |
| 55 | S&F 20 mm bore dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high dencity plasstic ball screwed for iron pipe and fixed .(minimum weight 15 mm-142gms/20mm-210gms) all as specified and directed. |
| 56 | S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 25 mm bore pipe all as specified and directed. |
| 57 | Taking down steel tubing and connections 15 mm bore, including cleaning for refixing or removal to store all as specified and directed. |
| 58 | All same as per item No.56 here in before but 20 mm bore. |
| 59 | All same as per item No.56 here in before but 25 mm bore. |
| 60 | S&F 16mm bore CPVC pipes with SDR 13.5 pipes & plain CPVC SDR 11 fittings fixed complete to walls, ceilings,floors etc. in repairs complete all as specified and directed. |
| 61 | All as per item No.59 above but 20mm bore. |
| 62 | S&F steel water tubing 25 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors all as specified and directed. |
| 63 | S&F sinks without drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe of overall size of 610mmX510mm bowl size 560mmX460mmX203mm including waste couplings, waste pipe and all other necessary fittings all as specified and directed. |
| 64 | S&F CP Bibtap 15mm bore for Kitchen sink regular spout with flange of Make: Prayag, Catpart No 6616 or equivalent in other make complete asdirected by the Engr-in-charge. |
| 65 | Taking down old plate rack and refixing new stainless steel plate rack of minimum size 970x770x230mm of standard quality,fixed to wall with wooden gutties and screws complete all as specified anddirected. |
| 66 | S&F in repairs Vitreous China wash hand basin whiteflat back, size 450x300mm including couplings, waste pipe, connections all fittings complete all as directed. |
| 67 | S&F 15mm bore pillar taps CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe in repairs all as specified and directed.Make : Prayag Catpart No - 7314 or equivalent in other make. |
| 68 | S&F 650 x 450 mm bevelled edge mirror of selected quality glass mounted on frame less and fixed to half cut glass clips with chromium plated brass screws and cup washersin repairs complete all as directed by the Engr-in-Charge. |
| 69 | S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including including Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc..and Seat cover for pedestal pan withall as specified and directed. |
| 70 | Supply and fix 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including 15 mm bore LDPE pipe 45cm long withbrass nuts and washers complete all as specified and directed. |
| 71 | S&F brass CP Two way tap screwed down for iron pipe suitable for 15 mm dia bore of pipe complete all as specified and asdirected by the Engineer-in-Charge. Make : Prayag/Parryware or equivalent |
| 72 | S&F brass chromium plated health faucet 15mm dia reinforced pipe fitted to GI pipe complete all as specified and directed. Make : Prayag/Parryware or equivalent |
| 73 | S&F brass CP wall mixer 15 mm bore for mixing hot and cold water screwed down for iron pipe and fixed as specified and directed. |
| 74 | S&F brass CP shower rose with arms 75 mm size fixed all as specified and directed. |
| 75 | S&F 15mm CP Angle valves, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair.Make: Prayag/Parryware or equivalent. |
| 76 | S&F Sheet glass shelf assembly for WHBconsisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long in repairs complete all as specified and directed |
| 77 | S&F Corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard complete all as specified and directed |
| 78 | S&F CP Towel ring for WHB complete all as specified and directed |
| 79 | S&F Towel Rail 600mm long 20mm dia,D type cromium plated, fixed with and including Chromium plated brass screws andwooden/plastic cleats. and fixed in all as specified and directed. |
| 80 | S&F Soap dish any type fixed to plugs with chromium plated complete all as specified and directed |
| 81 | S&F Stainless Steel Pegset of 4 No Pegs fixed withand including CP brass screws and wooden/Plastic cleats and fixed complete all as specified and directed. |
| 82 | S&F SS Grating round 140 mm dia(Minimum weight 50gms) and fixed in repairs all as specified and directed. |
| 83 | S&F SS Grating doom 125 mm dia with waste hole (Minimum weight 40gms) and fixed in repairs all as specified and directed. |
| 84 | S&F PVC (SWR) floor trap of 75mm, plain with Grating doom 125 mm dia with or without waste hole (as necessity) of PTMT (Minimum weight 40gms) including jointing with solvent cement complete all as specified and as directed. |
| 85 | S&F PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 86 | S&F PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed. |
| 87 | S&F PVC (SWR) bends of 75mm bore complete all as specified and as directed. |
| 88 | S&F PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 89 | S&F PVC (SWR) 110mm pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 90 | S&F PVC (SWR) bends of 110mm bore complete all as specified and as directed. |
| 91 | S&F PVC (SWR) branch piece of 110mm bore, single (single Y) equal or unequal complete all as specified and as directed. |
| 92 | S&F PVC (SWR) vent cowl of 110mm bore complete all as specified and as directed. |
| 93 | S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 94 | M&L Roughening surfaces of old concrete floor as in sunken floors by wire brush,air blower, sweeping clean, washing down with water to remove dust,etc, Brushing neat cement slurry with 3.0 kg of cement per square metre on old concrete surfaces, Rendering 10mm thick in CM 1:3 mixing with WPC and Applying evenly 2 coats of polyurathane sealent, providing and applying cold applied elastomeric smart care damp proof ultra (fiber reinforced elastomeric liquid applied water proofing membrane) complete all as specified and as directed.Make : Asian Paints smart care waterproofing/Pidilite or equivalent.Note:- WPC will be measured and paid separately. |
| 95 | M&L Cement concrete type D-2, 1:4:8 (40mm graded aggregate) 75mm thick in floors and pavings etc. all as specified and directed. |
| 96 | Demolition of RCC in Roofs, Tanks, floors (other than ground floors), beams, staircases, landing, chajjas, kitchen slabs, Chimneys, railings and similar suspended work if cement concrete is reinforced (reinforcement cut as required to facilitate demolition) |
| 97 | M&L Brickwork with fly ash bricks, straight or curved on plain exc 6m mean radius, built in cemrent mortar 1:4 complete all as specified and as directed. |
| 98 | M&L Plain Cement concrete type C-2, 1:3:6(40mm graded aggregate) 75mm thick Laid in plinth protection including Grade B joint filling as directed by Engineer In charge. |
| 99 | Removing excavated material exc 250 m but n.exc 500m and depositing where directed |
| 100 | M&L Roughening surfaces of old concrete floor/roof surfaces by picking, sweeping clean and washing down with water to remove dust,etc and Brushing neat cement slurry with 3.0 kg of cement per square metre on old concrete surfaces. |
| 101 | M&L Rendering 15mm thick on fair faces of brick work / concrete surfaces in CM 1:3 finished even and smooth without using extra cement and mixing with WPC as per manufacturers instruction. Note:- WPC will be measured and paid separately. |
| 102 | Supply only liquidwater proofing compound to incorporate in above item. |
| 103 | M&L Applying evenly a priming coat of industrial bitumen 85/25 at the rate of 0.3 kg per sq.m including cleaning surfaces complete all as specified and directed |
| 104 | APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. |
| 105 | M&L applying two coats of aluminium paint @ 0.1 ltr/Sqm per each coat complete all as directed, Preparation of new or previously untreated surface. |
| 106 | M&L Non skid ceramic tiles (Rectified tiles) of 7 to 8 mm thick(square/ rectangular) area of each the exceeding 0.18 sqm but not exceeding 0.38 sqm as in skirting in neat cement slurry and pointed in white or coloured cement to match all as directed. |
| 107 | Removing demolished material / rubbishexc.1.50km and depositing wheredirected at a level n exc 5 km above the starting point |
| 108 | M&L Demolition of Brickwork or stone/ boulder masonry, built in cement mortar,including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed by Engineer in charge. |
| 109 | M&L Finishing walls on Stone masonry with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed. |
| 110 | M&L 3 coats of white wash over a coat of primer on old plastered surfaces on ceilings complete all as specified and as directed. |
| 111 | S&F Toughened glass door (Frame less) with 12mm toughened glass,swing type with 25mmx450mm H type handle both side with soft door closer system with all fittings which are necessary for installation complete all as specified and directed. |
| 112 | S&F Factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories is included and packing the gaps with silicon sealent complete all as directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.)(B) Area exceeding 2.00 sqm each |
| 113 | S&F factory made uPVC white colour fixed window made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- 5mm thick glazing with selected quality glass along with Silicon sealent complete all as directed.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories Net opening will be measured for payment purpose.)(A) Area not exceeding 1.00 sqm each. |
| 114 | S&F Sheet glass of exc 0.5 sqm, ordinary quality and glazing with oil putty in each pane complete all as specified and as directed,thickness of glass of 5.5 mm |
| 115 | Supply and fixin25 mm dia mild steel, chromium platedcurtain rodswith fixing brackets, stops, rollers etc.and taking down old pipe complete all as specified and as directed by the Engineer-in-Charge. |
| 116 | S&F Table top wash hand basin whiteflat back, size 510mmX410mmX150mm including couplings, waste pipe, connections and all necessary fittings complete all as specified and as directed.Make: Prayag Catpart No-4715 or quivalent in other make. |
| 117 | S&F 15mm bore pillar taps of Swan neck type CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe in repairs all as specified and directed.Make: Prayag Catpart No-6314N or quivalent in other make. |
| 118 | S&F 32mm CP Bottle traps for washbasin outletMake: Prayag or equivalent in other make complete all as specified and asdirected by the Engineer-in-Charge. |
| 119 | S&F concealledstop valves 15 mmbore fancy type, chromium plated, with long shank and cup,screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed in repairs all as specified and directed. |
| 120 | S&F inrepair for 15mm dia Two way bib cock CP fancy type fixed to GI pipe complete all as specified anddireted Make: Parryware Cat No G3167A1 |
| 121 | S&F Chromium plated (CP)Toilet paper holder of vitreous china fixed to wallsbrass screws complete all as specified and directed |
| 122 | Demolition/Dismantling of drain pipes any type at any position complete all as specified and directed, 100mm dia |
| 123 | S &F 75 mm dia PVC (SWR) floor trap plain with grating including jointing to waste pipe fixed in solvent cement or cement concrete 1:2:4 type B1 all as specified and directed. |
| 124 | Supply and fix 15 mm bore LDPE pipe 45cm long withbrass nuts and washers on both ends all asin repairs specified and directed. |
| 125 | S & F inrepair 1000 Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical shape with vertical top closed) hoisted and fixed in position including dismantling existing old water tankall as specified and directed. |
| 126 | S & F in repair for vitreous china, half stall urinal white with union and grating for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)incl. providing anf fixing plugs, securing urinal to plugs with and incl, 60 mm long brass screws, pointing around urinal back in cement mortar 1:2 (excl fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed |
| 127 | S & F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) |
| 128 | M&L Providing precast cement concrete of Type B1 1:2:4 (20mm graded) set in CM 1:4 in window or door cills, lintels, bressumers, steps, quoin blocks of any section indicated, with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match complete all as specified and directed. |
| 129 | M&L TMT bars 10 mm dia and over ,cut to length bent to shape required incl cranking, bending, spirally hooping for columnsand binding with MS wire (annealed) not less than 0.90mm dia wire etc complete. |
| 130 | M&L TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 131 | Supplying and laying 25mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 132 | Dismantling wrought iron or mild steel work of any discription not otherwise provide for |
| 133 | Taking down carefully existing unserviceablealuminum/copperpoint wiring (light, fan, socket or power) of any description & in anyposition complete including all fittings& fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etcincluding taking out and removing serviceable fittings/fixtures and making good the disturbed surface of walls, floors, ceiling etc. to match with the existing surfaces complete all as specified and directed |
| 134 | M&L for point wiring with 1.5 Sqmm (nominal area) multi stranded copper conductor, single core, FR-LSH PVC insulated & unsheathed cable with proper colour coding in accordance with relevant IS, 1100 volts grade drawn in ISI marked MMS non-metallic PVC conduit of size not less than 20mm dia conforming to IS 9537:latest, concealed type terminated in sunken type GI sheet metal flush boxes of 16 Gauge including all accessories andusing 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FR-LSH PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed for following:- NOTE FOR ITEM NO.133,134,135:- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the conduits and boxesto required depth & making good the disturbed surface in CM 1:4 including core cutting wherever required and finishing the surface to match with the existing surface. If the building is stone masonry, diamond tools must be used to cut the surfaces.In case the flush box needs to be installed on surface, prior approval must be taken from the Engineer-in-charge and surface modular boxes made of FR grade ABS of minimum 1mm thickness with rounded corners need to be used instead of metal flush boxes.(ii)Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A\".(iii) The quoted rates shall be deemed to be inclusive for provision and installation of conduits, covering sunken boards/terminal boxes / junction boxes of any shape and size modular white colour cover plate with frame and modular metal flush box. All metal boxes and plates to be of the same make as the switches mentioned in this schedule.(iv) Insulation resistance test: All wiring shall be tested with 500V Meggar between phases, phase – neutral and to Earth. IRvalue shall not be less than 1M-ohm. |
| 135 | One light/buzzer point controlled by one; one way switch. |
| 136 | One light point controlled by two two way switches |
| 137 | One fan/exhaust fan point controlled by one, one way switch |
| 138 | One 3 pin socket out let 5 amp point on the (same board) with other switches. |
| 139 | One 3 pin socket outlet 5 amp point on the independent board |
| 140 | All as per item No. 133 here-in-before butwith 2.5 sq mm size FRLSH PVC insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board. |
| 141 | All as per item No. 133 here-in-before butwith 4 sq mm size FR-LSH PVC insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 15A Switch socket/Earth plug socket for ACs and geysers |
| 142 | S&F ceiling rose surface bakelite 63.5 x 20 mm, three terminals, complete all as specifiedanddirected. |
| 143 | Supply and fix piano switch 6 Amp, one way, 1 way, flush type, single pole 230 volts AC circuit complete all as specified and directed by Engr-in-charge. |
| 144 | Supply and fix piano switch 6 Amp, two way, flush type, 230 volts AC circuit complete all as specified and directed by Engr-in-charge. |
| 145 | Supply and fix piano switch 16 Amp, one way, flush type, single pole, 230 volts AC circuit complete all as specified and directed by Engr-in-charge. |
| 146 | Supply and fix bell push flush type 6 Amp, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge |
| 147 | Supply and fix socket outlet flush type, 6 Amp, 3 pin, 230 volts AC circuit complete all as specified and directed by Engr-in-charge |
| 148 | Supply and fix socket outlet, 6 /16 Amp, 2/3 pin combined, flush type, 230 volts AC circuit complete all as specified and directed by Engr-in-charge |
| 149 | Supply and fix fan regulator 1stepped and flush type complete all as specified and directed by Accepting officer |
| 150 | S & F call bell, ding dong AC 230 Volt single pole complete as specified. |
| 151 | S & Fearth plug and socket, single pole, neutral sheet metal enclosures with a two pin, plug and socket 20Amp, 240 voltswith and including one MCB, SP, 20A, 240 Volts as per all as specified and directed. |
| 152 | S & F 4ft 20W LED batten tubelightsurface/wall mounted with powder coated Aluminium housing, high optically efficient polycarbonate diffuser, inbuilt electronic driver duly wired upto terminal block, luminous efficiency > 100 lm/watt, surge protection upto 4kV, 440V High voltage protection, power factor > 0.95, CRI > 80 all as specifiedanddirected. Model: Crompton Linea Pro or similar |
| 153 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete, all as specified and directed. |
| 154 | S&F lamp holder PVC / Polycarbonate type with cord grip cap suitable with T shape B22 LED lamp fitting 12 Watt including the lamp complete all as specified and directed by Engr-in-charge |
| 155 | Taking down distribution boards / main switches of any type including metal box, size and capacity placed in metal box complete all as specified and directed by Engr-in-charge |
| 156 | Taking down MCBs, metal clad plug of any type, size and capacity complete all as specified and directed by Engr-in-charge |
| 157 | S & Fsheet metal enclosure powder painted forMCB DB SPN08 way double door with IP-42 protectionwith Din rail and busbar capacity 200A complete all as specified and directed by Engr-in-charge. |
| 158 | Supply and fixing MCB SPN, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed. |
| 159 | S&F MCB single pole, 6 to 32 Ampsin `B’ series having current rating 10 KA complete all as specified and directed. |
| 160 | Taking Down Old Unserviceable Submain wiring complete including all accessories and making good the disturbed surfaces all as specified and as directed. |
| 161 | M/L for Sub main wiring with 2 runs of PVC insulated unsheathedmulti stranded single core copper conducter 6 Sqmm drawn through PVC conduit including accessories with 6 sqmm PVC insulatedearth wire concealed in wall etc after removing the unserviceable wiringand connecting up ,all as directed. Note: 2 runs of 6 sqmm copper cable and one run of 6sqmm copper earth wire and conduit will be measured as one length. |
| 162 | M&L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt in alternate layers all around earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire meshincluding necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle completeall as specified & directed. NOTE: Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’ Note: The item includes measuring the earth resistance value and the value must be less than 10ohms failing which earthing must be executed again at additional expenses of contractor. |
| 163 | Supply and fixing LED building security light fitting 36 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket of medium grade GI pipe 32mm dia with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection with suitable no of nuts, bolts and clamps complete all as specified and directed by Engr-in-charge |
| 164 | Disconnecting and removingceiling fan of any sweepany height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly, lubricating with approved lubricants, reassembling, refixing in original position includingminor repairs for the smooth functioning and provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan includingpainting of ceiling fan complete with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust etc & testing complete all as specified and as directed. |
| 165 | Supply and fixing ceiling fans in replacement complete with blades, copper motor, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated as per latest BEE norms in vogue at the time of supply with brushless direct current motor (BLDC) without remote complete including depositing the old fan in MES E/M store complete all as specified and as directed. |
| 166 | Disconnecting and removing exhaust fan of any sweepany height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughlyprovision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan includingpainting of exhaust fan complete with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust etc & testing complete all as specified and as directed. |
| 167 | S & F in replacement of louvers with suitable frame work and fixing arrangements forexhaust fan of any size sweep complete including removing the existing unserviceable one complete all as specified and as directed. |
| 168 | S&F exhaust fan of sweep 200mm, plastic body , power consumption not to exceed 25watt, AC single phase 230V, 50Hz, copper winding including mesh/louvers complete all as specified and directed |
| 169 | Supply and fix in replacement XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of cross sectional area 16 sqmm 4 core in accordance with IS 7098 complete all as specified and directed |
| 170 | Excavation in trenches not exc 1.5 wide and not exc 1.5 mtr deep and getting out in hard /dense soil for laying pipes complete all as specified . |
| 171 | Supply and fill riddled soil obtain from excavated soil upto depth of 30cm (8cm below cable and remaining above cable) for cushioning of cable complete in respect all as specified and as direcred by Engr-in-Chrage. Note :Excavated soil shall be riddled by using sieve to seperate composite particles etc as per IS 1255:1983 and refilling in trenches as in cable cushioning. |
| 172 | Returning and filling in soils , includingspreading ,levelling ,wateringand well ramming in layersnot exc25 cm thick completeall as specified and directed . |
| 173 | Removal of excavated material to a distance not exc 50 mtr away from starting pointand depositing where directed at a level notexc 1.5 mtr above the starting pointcomplete all as specifiedand directed . |
| 174 | Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250mm x 150mm x 40mm complete all as specifiedand directed by the Engineer-in-charge |
| 175 | Supply and lay GIpipe light grade 40mm dia laid in trenches/concealed in wall for cable protection complete all as specified and directed by Engr-in-chagre. |
| 176 | Supply, Install, testing & commissioning factory made indoor type dust and vermin proof CPRI approved Feeder pillar panel board cubical double door hinged type compartmentalized of suitable size 415 volts, AC 50 Hz fabricated of CRCA sheet 2 mm thick machine pressed grouted in PCC 1:2:4 type B1 (20mm grade stone aggregated) powder coated inside and outside complete including 4 poles copper bus bar of size mentioned below mounted on porcelain insulators and enclosed in chamber made out of 2mm thick CRCA sheet machine pressed and connection from incoming and outgoing electric cable with suitable size thimbles / lugs cable gland with open able shutters and comprising complete all as specified and as directed. of the following :- |
| 177 | (i) incomingMCCB 63 Amp, 36 KA, 4 Pole 415 Volt - 01 Nos, (ii) Outgoing MCB 6A SP MCB-03 Nos(iii) Outgoing MCB SPN 6-32 Amp, 10 KA 4 Pole 415 Volt - 04 Nos (iv) Copper bus bar for 3 Ph & Neutral 150 Amp- 01 Set(v) Panel should have provision and space to install five no of 1 phase electric meters.Electric wiring from outgoing MCBs to Electric meters to be provided with suitable size copper wire. Electric meters will be supplied by MES. Wiring from electric meter to main MCB DB will be measured separately(vi) Voltmeter 0-500V and selectro switch(vii) Ammeter with CTs 100/5 A rangeand selector switch(viii) Phase indicator neon lamps for 1 Ph -01 Set |
| 178 | Taking Down water heater (Electric Geyser) storage type of any make of 25 / 50 ltr capacity after disconnecting the existing electrical connection along with earth plug socket if existing, water pipes and deposit to E/M store yard and and refixing in the original place/position duly connecting up water supply and electric supply etc.complete after cleaning externally complete all as specified and as directed. |
| 179 | Supply and fix electric water heater, vertical storage typewith ferroglass coated anti-rust inner container and heating element upto 2 KW capacity 25 litre, heavy duty anode rod, preset thermal cutout, BEE 5 Star rated as per latest BEE norms (i.e. standing losses ≤ 0.465 kWh/24 hour/45°C which is only valid till 31st Dec 2025, material shall be supplied as per latest revision at the time of supply, complete with all accessories such as safety valve, thermostat, NRV, connection piece(hot and cold water connection pipe)etc complete all as specified and directed by Engr-in-charge. Model: Havells Monza DX or similar in Bajaj/Orient |
| 180 | Supply and fix stop valve of dia 20 mm with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed by Engr-in-charge. |
| 181 | Supply and fix bib tap of dia 20 mm cast iron alloy with crutch or butterfly handle screwd for iron pipe to outlet pipe of geyser complete all as specified and directed by Engr-in-charge. |
| 182 | Supply and fix of any length CPVC pipe of dia 20 mm dia manufactured as per IS : 15778including connection sockets, elbow and brass tee for connecting pipes etc and connecting pipe to inlet and outlet of the geyser complete all as specified and directed by Engr-in-charge |
| 183 | Supply and fix of any length GI pipe of dia 15 mm dia, ISI marked, medium grade including connection sockets, elbow and tee for connecting pipes etc to the existing pipeline including civil work required if any and connecting pipe to inlet and outlet of the geyser complete all as specified and directed by Engr-in-charge |
| 184 | Cutting chases, pinning in brick walls making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps,cills, sunshades, shelves, lintels, etc.;and cutting chases for concealed water tubing or concealed conduitwiring, etc. and making good, cutting not exceeding 10cm girth complete all as specified and as directed by the Engineer-in-charge |
| 185 | Supply and fix in replacement XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of cross sectional area 25 sqmm 4 core in accordance with IS 7098 complete all as specified and directed |
| 186 | Supply and fix modular switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge. |
| 187 | Supply and fix modular switch 16 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge. |
| 188 | Supply and fix modular socket, 6 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge |
| 189 | Supply and fix modular socket, 6 /16 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge |
| 190 | Supply and fix modular fan regulator 100 W 2 module, socket type and capacitive type all as specified and directed by Accepting officer |
| 191 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC surface type ultra slim model with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 192 | Supply and fixin replacement distribution board double door type VTPN 4 waysheet steel powder painted with bus bar ,neutral link & earth bar etc. with IP 43 degree of protection flushing in wall including connecting up all incoming and outgoing cables/circuit wiring complete all as specified and directed by Engineer-in-Charge. |
| 193 | Supply and fixingMCCB 25-100 Amp Three pole 415 Volt , breaking capacity, 16 KA, with fixed thermal & magnetic setting complete all as specified and as directed by the Engineer in charge. |
| 194 | Supply and fix in replacement exhaust fan, steel body AC single Phase. 230V of size 300mm sweep heavy duty with, blades, and frame and louvers complete including depositing the old fan to MES E/M Store complete all as specified and as directed. |
| 195 | Supply and fix in replacement exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with blades, and frame andlouvers including depositing the old fan to MES E/M Store complete complete all as specified and as directed. |
| 196 | Supply and fix in replacement exhaust fan, steel body AC single Phase. 230V of size 225mm sweep with, blades, and frame andlouvers including depositing the old fan to MES E/M Store complete all as specified and as directed. |
| 197 | S&F 400mm swing wall fan, 4star, smooth oscillation, copper motor with remote control, 72 speeds, plastic body complete all as specified and directed by Engr-in-charge. |
| 198 | Supply, installation,commissioning of Water cooler fully stainless steel, electric driven single phase having approx storage and nominal cooling capacity 40/80 Ltrs complete all as specified and directed |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
