|
| 1 | Demolition Stone slabsof any description or thickness in roof ,sun shades, Chajjas, floors, aprons etc laid bedded and pointed in any mortar. (Note: Dismantling shall be carried out in portion only .) |
| 2 | Dismantling Brick tiles or terracing tiles,single layer on roofs complete all as specified and directed by Engr-in-Charge. |
| 3 | Demolition of lime Concrete to any thickness in any position incl all toppingthickness (below or above ground level) complete all as specified and directed by Engr-in-Charge. |
| 4 | Demolition cement concrete unreinforced of any description and in any position not otherwise specifically provided complete all as specified and directed by Engr-in-Charge. |
| 5 | Raking out joints/pointing to brick work or stone patti ceiling laid flat in lime concrete complete all as specified and directed by Engr-in-Charge. |
| 6 | Taking down cement plaster, any description on brick or stone or cement concrete walls including any tiles and raking out joints, hacking for key, scrubbing down with water complete all as specified and directed by Engr-in-Charge. |
| 7 | Taking down chowkats or frameswith shutters(without taking offshutters from frames) area not exceeding 1.50 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed by Engr-in-Charge. |
| 8 | Taking down chowkats or frameswith shutters(without taking offshutters from frames) area exceeding 1.50 square metre andnot exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed by Engr-in-Charge. |
| 9 | Taking down shutter exc 1 sqm and n exc 2 sqm each and refixing in the same opening after rescuring or easing & adjustment complete all as specified and directed by Engr-in-Charge. |
| 10 | Demolition of brick/stone masonry built in CM. complete all as specified and directed by Engr-in-Charge. |
| 11 | Dismantling cast iron /PVCpipes fixed to walls or laid in trenches in any position complete all as specified and directed by Engr-in-Charge. |
| 12 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr In Charge |
| 13 | Dismantling Asbestos cement( Corrugated,semi corrugated, etc.) sheet in roof covering including ridges complete all as specified and directed by Engr-in-Charge. |
| 14 | S&F forPre Painted Galvalume aluminium zinc coating GI based corrugated steel Sheet 0.50 mm thick of any colour having tensile str 550 Mpaas in roof covering /cladding to wall and fixedwith self tapping screws as per manufacturers instruction (design and colour as app by Engg in charge)complete all as specified and directed by Engr-in-Charge. |
| 15 | S&F forPre Painted Galvalume aluminium zinc coating GI based Plain steel Sheet 0.50 mm thick of any colour having tensile str 550 Mpaas in roof covering /cladding to wall and fixedwith self tapping screws as per manufacturers instruction (design and colour as app by Engg in charge) complete all as specified and directed by Engr-in-Charge. |
| 16 | Dismantling timber scantling 40 sq cm and over in section, in any position complete but unframed structure complete all as specified and directed by Engr-in-Charge. |
| 17 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete including loosning of bolts , cutting rivets and taking down carefully complete all as specified and directed by Engr-in-Charge. |
| 18 | M&L steel work in tubular trussess/ purlins incl spl shaped washer etc. using ERW or induction butt welded tubes confirming to IS 1161-1979 grade St-240 complete all as specified and directed by Engr-in-Charge. |
| 19 | M&L framed brackets of angles or tees with web and flanges cut to shape, drilled and countershunk for screw, including bending and welding angles, as necessary, gusset plate, riveting, etc. n exc. 10 kg brackets, confirming to Fe. 290 Gde -E-165 complete all as specified and as directed by Engineer-In-Charge. |
| 20 | S&F Mild steel bolts.exc. 5 cm lengthnot exc. 10 cm length (machine made) with hexagonal or square heads at one end and screwed the other , or screwed both ends, each screwed end to be fittied with washers and one hexagonal or square nut 5 to 10 mm neck dia complete all as specified and directed by Engr-in-Charge. |
| 21 | Dismantling of existing wall and false ceiling boards ( fibre,pulp, insulation etc.) or insulation boards/slabs/blankets,any thickness including cover filletes etc complete all as specified and directed by Engr-in-Charge. |
| 22 | S&F Composite Cement Ceiling board4 mm thick in ( 595 mm X 595 mm ) pannel (Make-Everest Ramco or equivalent.) designer ceiling pre finished conforming to IS 14862 type B category three incl powder coated GI frame , grid work, hold fast,suspended with suspender along with holding down bolt etc. all necessary arranements complete all as specified and directed by Engr-in-Charge. |
| 23 | M&L Brick work with fly ash bricks straight or curved on plan to any radiusbuilt in CM 1:4 complete all as specified and directed by Engr-in-Charge. |
| 24 | M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and fair complete all as specified. |
| 25 | M&L for Rendering 15 mm thick in two layers on brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement including mixing integral water proofing compound in the proportion as mentioned in manufacturer\"s instructions complete all as specified and directed by Engr-in-Charge. (Water proofing compound to be measured and paid for separately). |
| 26 | M&L for Rendering 10mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 27 | M&L for Rendering 5 mm thick on brick or concrete surface as in ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 28 | M&L vitrified ceramic coloured tiles light shade7to 8.5 mm thick (Square/ rectangular ) polishedin floors ,area of each tile n.exc. 0.36 sqm set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles, over and including 15 mm thick screed plaster in CM 1:6 complete all as specified and directed by Engr-in-Charge. |
| 29 | M&L vitrified ceramic coloured tiles light shade7 to 8.5 mm thick (Square/ rectangular )in skirting ,dados etc. area of each tilen.exc. 0.36 sqm set and jointed in neat cement slurry and pointed in white or colour cement to match, over and including 10 mm thick screed plaster in CM 1:4 complete all as specified and directed |
| 30 | M&L for providing 75 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 31 | Cutting chases,pinning in making good to facing where requried and pointing in cement mortar 1:3 to ends or edge of landings, steps, cills, sunshade, shelves, lintel etc. tubes or concealed conduit etc. and making good, cutting not exc 10 cm girth complete all as specified and directed by Engr-in-Charge. |
| 32 | M&L Jodhpur stone of roof slabs, self faced 7.5 cm to 10cm thick, 25cm to 35cm wide, hoisted and set, jointed and grouted in lime mortar 1:3 or cement mortar 1:6 complete all as specified and directed by Engr-in-Charge. |
| 33 | M&L 20-25 mm thick Sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates, etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4, complete all as specified and directed by Engr-in-Charge. |
| 34 | M&Lfor flush pointing in cement mortar 1:3 on ceiling surfaces of stone patti roofs complete all as specified and directed by Engr-in-Charge. |
| 35 | M&L for 50 mm thick PCC 1:3:6 20 m graded stone aggregate type C-1 using 20mm graded crushed stone aggregate as in levelling course for roofetc complete all as specified and directed by Engr-in-Charge. |
| 36 | S & F Mild steel framed work such as grills, gratings, tank staging,Iron girderetc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks, cooler stand and similar work conforming to Fe 290 Gd E-165 complete all as specified and directed by Engr-in-Charge. |
| 37 | Supply only liquidwater proofing compound complete all as specified and directed by Engr-in-Charge. |
| 38 | Cleaning of surface of loose dust and grit and cement slurry etc. by means of wire brush dust removing and scrapper etc .Pot holes/cracks shall be repaired with cement admixed with polymer as per manufacturer instructions complete all as specified and directed by Engr-in-Charge. |
| 39 | Providing PCC coving /gola along vertical parapets of size 75 mm x 75 mm with concrete mix (1:2:4) type B1 using WPC of approved make etc complete all as specified and directed by Engr-in-Charge. |
| 40 | M&L for treatment of surface with PU Elastoseal primer with Epoxy primer to seal the pores and enhance the adhesion of the coating,supplying and applying single component waterproofing liquid membrane based on pure,elastomeric,polyurethane resin cold applied of spray/brush applied membrane with an elongation of (650%+,- 50 ) and tensile strength not less than 2 Mpa ,crack bridging ability not less than 2 mm.No leakage upto 5 bars of water pressure.shore hardness > 50 shore. The Minimum thickness to be applied shall be 1.5 mm,( overall )in two layers (each layer 750 micron) or as per manufacurer\"s instructions so as acheive thickness not less tha 1.5 mmcomplete all as specified and directed by Engr-in-Charge. |
| 41 | Providing and laying of protective Geotextile fabric 150 GSM over the entire membrane with proper overlaps of 75 mm before laying SRI Roof tiles complete all as specified and directed by Engr-in-Charge. |
| 42 | Providing and laying SRI (Sun Resistance Index ) roof tiles (size 300x300x9-10 mm) with 20 mm thick cement plaster in CM (1:4) mixed with liquid WPC as per manufacturer\"s instructions confirming to required slopecomplete all as specified and directed by Engr-in-Charge.Note :-For Roof Treatment process Make of PU Primer /Membrane :- SIKA/BASF,BERGER/STP FOSROC/ SAINT GOBIN /PIDILITE |
| 43 | S&F for factory made single extruded WPC ( Wood polymer composite) solid door /window/ceosetory windows& other Frames/Chowkhat of size 65x100 mm compraising of virgin PVC polymer of K value 58-60 ( Suspension grade),calcium carbonate and natural fibers (wood powder/rice husk/wheat husk ) and non toxic additives ( maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum,screw withdrawal strength of 2200 N(face) & 1100 N ( Edge),minimum compressive strength of 58 N/mm2,modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fastners of required dia and length complete as per direction of Eng In charge .( MS holdfast / lugs dash fastners shall be included in unit rate of item). Note:- For WPC solid door/window frames,minus 5 mm toletance in dimension i.e. depth and width of profile shall be acceptable .Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 44 | S&F for factory made single extruded WPC ( Wood polymer composite) solid plainflush door shutter of size 30 mm thick compraising of virgin PVC polymer of K value 58-60 ( Suspension grade),calcium carbonate and natural fibers (wood powder/rice husk/wheat husk ) and non toxic additives ( maximum toxicity index of 12 for 100 gms ) having minimumdensity of 650 kg/cum,screw withdrawal strength of 1800 N(face) & 900 N ( Edge),minimum compressive strength of 50 N/mm2,modules of elasticity 850 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixing with Stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws ,complete all as specified and directed by Engr-in-Charge.Note:- SS butt hinges and SS screws shall be included in unit rate of item. |
| 45 | S&F for 100 mm Stainless steel Butt hinges complete all as specified and directed by Engr-in-Charge. |
| 46 | S&F for 150mm Stainless steel handles complete all as specified and directed by Engr-in-Charge. |
| 47 | S&F SS sliding door bolt,length 250 mm nuts and washers complete all as specified and directed by Engr-in-Charge. |
| 48 | S&F for 150mm size Stainlesssteel barrel tower bolts complete all as specified and directed by Engr-in-Charge. |
| 49 | S&F factory made mild steel Window/Ventilator box type with side huge shutters incl pintol hinges,steel handles, steel peg stay and all locking arrangement and one shop coat of red oxide primer complete all specified.Note :i)The window shall be fabricated as per Drg No CEBTZ/TD/888R & 889ii)MS fillets, glazing, wire gauge shall be measured and paid separatelyiii) opening incl provn shutter for cooler to be provided as directed |
| 50 | S&F Powder coated Aluminium frame door, window ,ventilator frames/shutter,other sections for doors , windows , ventilators with one or more rebates , channel for sliding shutters , grills etc including jointing cleats for fixing etc , complete all as specified and directed by Engr-in-Charge. |
| 51 | Hacking out old broken glass (any thickness ,size quality ordescription) from wooden/metal frame including punching or drilling out old glazing pins/spring clips glazed with putty and removing materials from site of workcomplete all as specified and directed by Engr-in-Charge. |
| 52 | S&F sheet glass 4.8 mm thick ordinary quality & glazing with rubber gasket in squares exc 0.5sqm in each pane as in aluminium door complete all as specified and directed by Engineer-in-Charge. |
| 53 | S&F aluminium glazing clip with rubber gasket of suitable size and thickness as required at site for fixing glass in aluminium door/windows complete all as specified and directed by Engineer-in-Charge. |
| 54 | S&F fordoor closer hydraulically regulated , designation No 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 KG and fixed complete all as specified and directed by Engineer-in-Charge. |
| 55 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exe 0.5 sqm each panecomplete all as specified and directed by Engr-in-Charge. |
| 56 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-Charge. |
| 57 | S&F in repair Stainless steel wire cloth 0.36 mm nominal dia of wire and avg width of aperture1.40mm complete all as specified and directed by Engr-in-Charge. |
| 58 | S&F in repair 20 mm dia mild steel curtain rod chromium plated incl brackets, stops etc. complete all as specified and directed by Engr-in-Charge. |
| 59 | S & F PVC(SWR)single socketed in any length with rubber ring joint fixed with wall of 110mmcomplete all as specified and directed by Engr-in-Charge. |
| 60 | S & F PVC(SWR) bends any radius 110mm bore complete all as specified and directed by Engr-in-Charge. |
| 61 | M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paintover a coat of red oxide primer complete all as specified and directed by Engr-in-Charge. |
| 62 | M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width & girth & applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge. |
| 63 | M&L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width and grith and applying one coat of synthetic enamel paint completeall as specified and as directed by Engineer-in-Charge |
| 64 | Preparation of old surfaces plastered or unplastered ,brooming down or steel wire brushingetc and applying one coat of oil emulsion distemper/OBDof approved tint on old decorated surfaces of walls include comicesby using roller/spray machine over avg 2 mm thickwall care putty as desired smoothening of surfaces completeall as specified and as directed by Engr-in-Charge. |
| 65 | M&L for preparation of new surfaces plasteredby brooming down or steel wire brushing scraping down oil & greasy spots etc applying one coat of priming with chalk whitning and applying two coats of acrylic distemper/OBD paint of approved tint over avg 2 mm thickwall care puttyovernew plastered surfaces etc complete all as specified and directed by Engr-in-Charge. |
| 66 | M&L for preparation of new surfaces plasteredby brooming down or steel wire brushing scraping down oil & greasy spots etc and applying one coat of priming with chalk whitning, and applying three coats white wash on ceiling of approved tint overnew plastered surfacesetc all as specified and directed by Engineer-in-Charge. |
| 67 | Preparation of old surfaces plastered or unplastered , brooming down or steel wire brushing etc and applying one coat of white wash on old decorated surfaces of ceiling include cornices complete all as specified and as directed by Engineer-in-Charge. |
| 68 | M&L for preparation of new surfaces plastered by brooming down or steel wire brushing scraping down oil & greasy spots etcapplying one coat of priming with chalk whitningand applying two coat of exterior acrylic emulsion paint (weather coat )of approved tint overnew plastered surfaces etc over a coat of putty complete all as specified and directed by Engr-in-Charge. |
| 69 | M&L for for complete removal of existing treatment on walls etc, by scraping, sand papering or by using mechanical sander and preparingplastered surfacesand applying one coat of exterior acrylic emulsion paint (weather coat ) of approved tint on walls over a coat of wall primer and a coat of putty by using roller/spray machine complete as specified and as directed by Engineer-in-Charge |
| 70 | Surface dressing n.exe. 15cm deep and getting out(soft/loose soil) complete all as specified and directed by Engr-in-Charge. |
| 71 | Excavation in post holes (or similar holes) in loose/ soft soil each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exeeding 25cm, watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and directed by Engr-in-Charge. |
| 72 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth in soft & loose soil complete all as specified and directed by Engr-in-Charge. |
| 73 | Returning, filling in including spreading levelling watering well ramming in layers not exc 25 cm each layer in soft/loose soil complete all as specified and directed by Engr-in-Charge. |
| 74 | Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed by Engr-in-Charge. |
| 75 | S&F forPre Painted Galvalume aluminium zinc coating GI based corrugated steel Sheet 0.50 mm thick of any colour having tensile str 550 Mpaas in roof covering /cladding to wall and fixedwith self tapping screws as per manufacturers instruction (design and colour as app by Engg in charge)complete all as specified and directed by Engr-in-Charge. |
| 76 | M&L steel work in tubular trussess/ purlins/angle cleat/base plate etc. incl spl shaped washer etc. using ERW or induction butt welded tubes confirming to IS 1161-1979 grade St-240. complete all as specified and directed by Engineer-In-Charge. |
| 77 | S&F Mild steel bolts.exc. 5 cm lengthnot exc. 10 cm length (machine made) with hexagonal or square heads at one end and screwed the other , or screwed both ends, each screwed end to be fittied with washers and one hexagonal or square nut 5 to 10 mm neck dia complete all as specified and as directed by engineer-in-charge. |
| 78 | M&L for preparing new or previously untreated steel and iron surface of any description over 10cm in width or girth and applying two coats of synthetic enamelpaint over & including a coat ofred oxide zinc chromeprimer complete.as specified as Eng in charge. |
| 79 | M&L Brick work with fly ash bricks (old size) straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed by Engr-in-Charge. |
| 80 | M&L for 10 mm thick Rendering on brick or concrete surfaces in cm 1:6 finished even andsmoothw/o using extra cement complete all as specified and directed by Engr-in-Charge. |
| 81 | M&L for 15mm thick Renderingin cement mortar 1: 4 on other than fair faces of brick work or concrete surfaces, finished even & smooth without using extra cement as complete as specified per manufacturer instruction complete all as specified and directed by Engr-in-Charge. |
| 82 | M&L for preparation of new plastered surfaces plasteredby brooming down or steel wire brushing scraping down oil & greasy spots etc and applying one coat of primer, and applying three coats white washof approved tint overnew plastered surfacesetc complete all as specified and directed by Engr-in-Charge. |
| 83 | M&L for Preparing new plastered or unplastered surfaces of walls and applying two coats of cement base paint overa coat of primer as per manufacturer\"s instructions complete all as specified and directed by Engr-in-Charge. |
| 84 | M & L hardcore of guage n exc 63mm, broken bricks deposited, spread and levelled in layers n exc 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed by Engr-in-Charge. |
| 85 | M & L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete including sub base of floors etc. complete all as specified and directed by Engr-in-Charge. |
| 86 | M&L for 40 mm thick cement concrete 1:2:4 type B-1 using 12.5 mm graded stone aggregate,in flooring/hardstanding laid in alternate panels incl all necessary formwork and vibrator to be used finished surface even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 87 | M& L for plastic dividing strips , 1.5 mm thick and 38 mm width and inserted in position to confirm to design complete all as specified and directed by Engr-in-Charge. |
| 88 | M&L Forming 12mm thick expansion joint filled with pre-formed bituminous filler and top 30mm primed and sealing compound grade \"A\" in concrete slab upto 100 mm thick ,complete all as specified and directed by Engr-in-Charge. |
| 89 | M&L for sand filling under floors, cushning under interlocking tiles or in foundations incl watering and consolidations complete all as specified and directed by Engr-in-Charge. |
| 90 | M&L 60mm thick machine pressed precast concrete interlocking paver blockany shape and size of grade M-35confirming to IS 15658-2006 with grey cement and no pigmentlaid over sand cushioning complete all as specified and directed by Engr-in-Charge. |
| 91 | M & L for point wiring for one light/fan/bell/buzzer point controlled by one way switch with 2.5 sqmm single core PVC insulated and sheathed multi stranded copper conductor FRLSH cable 1100 volts grade (ISI Marked) including 2.5 sqmm single core PVC insulated and sheathed multi stranded copper conductor FRLSH cable 1100 volts grade (ISI Marked) as continues earth wire in green colourto coomon earth dolly laid/drawn into and includingnon metalic PVC concealed conduit (medium duty, ISI marked not less than 20 mm dia) with all fittings such as tee, bends etc all as per IS terminated in& including new modular metal flush boxes of requisite module concealed in wall for mounting fittings like modular Switches, sockets, regulators etc with and including modular cover plates with frame of requisite modules all as specified and as directed:Notes:- (i) Cost of cutting/leaving forming chases for conduit, sinking for metal flush boxes and making good in CM 1:4 shall deemed to be included in quoted rate of this item. (ii) The quoted rates of this item shall deemed for include for modular metal flush boxes of requisite module and modular cover plate with frame of requisite module of colour as approved by GE |
| 92 | One Light/fan/Ex-fan point controlled by one switch. |
| 93 | One 3 pin 5 amps socket point on the same board complete. |
| 94 | One multi pin socket 5/6Amps,Independent. |
| 95 | All as per item No 91 here -in- before but forone 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 2.5 sqmm single corePVC insulated and and sheathed multistranded copper conductor FRLSH cable 1100 Volt grade (ISI marked) including 2.5 Sqmm single core PVC insulated and sheathed multistranded copper conductor FRLSH cable 1100 Volt grade (ISI marked) as continuous earth wire in green colour complete all as specified and directed . |
| 96 | M&L socket outlet 3 Pin6 Amps modular type, 2/3 pin combined 2 module230 Voltscomplete all as specified and directed by Engr-in-Charge. |
| 97 | S & F switch Modular type, 15/16 Amp, 1 module single pole one way, 230 Volts, Modulartype complete all as specified and as directed by Engr- in -charge. |
| 98 | S & F socket outlet 3 Pin6/16 Amps modular type, 2/3 pin combined 2 module230 Voltscomplete all as specified and directed by Engr-in-Charge. |
| 99 | S & F ceiling rose, surface backelite , three terminal AC, 230 voltcomplete all as specified. |
| 100 | S&F LED tube light fitting, 1 x 20-22 watts, 230 volt, basic all purpose surface and wall mounted led batten with polycarbonate housing & integrated electronic driver, pre-wired and fixed on walls with all fixing accessories such as screws, clips etc and connecting up with two core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge. |
| 101 | Supply and fixing LED Bldg Security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. |
| 102 | S&F GI bracket made out of 40 mm bore GI pipe light grade /medume grade, ISI marked, medium grade 1.2m long bent to shape suitable for fixing of street light fitting including with 2 Nos MS clamps made with 40x3mm flat iron, bolts, nuts, washers etc including two coats of synthetic enamel paint over one coat of zinc chrome primer and fixing on electric pole complete all as specified and as directed by Engr-in-Charge. |
| 103 | S & F double door, sheet metal enclosure,powder coated for MCB DB SPN 8 way fittedwith neutral link, earth bar , din rail and 200 amps rated bus bar 230 volt conforming to IS 13032-1991 complete all as specified and as directed by Engr-in-charge. |
| 104 | S & F MCB SPN 32 Amps, 240 volts, breaking capacity 16KA complete all as specified and as dircted by Engr-in-charge. |
| 105 | S & F MCB SP 6-32 Amps , 240 volts, breaking capacity 10KA complete all as specified and as dircted by Engr-in-Charge. |
| 106 | Earthing complete with galvanised steel pipe electrode, 32mm bore, medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthing lead of 6mm dia galvanised iron or steel wire protected by provision of GI mediumgrade pipe 15mm bore including provision of concrete pit made with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4Kg/Sqm) and frame of angle iron 40x 40x6 mm and handle of 6mm dia MS bar made to shape, GI light grade 20mm bore pipe for watering perforated at bottom, 1.75meter long placed on top edge of earth plate, common salt & charcoal filling with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returing filling in and removal of surplus soil to a distance not exceeding 50 meters all as per electrical plate No -5 of SSR 2009 Part-I and connecting to Lighting protection earth test points all as specifed and directed including testing on completion. |
| 107 | Excavation in trenches n. exc 1.5 m in depth and not exc 1.5 m width for laying of cable lines etc and getting out in hard/ dense soil complete all as specified. |
| 108 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick complete all as specified. |
| 109 | Removing excavated soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5 above the starting point complete all as specified and as directed by Engr-in-charge. |
| 110 | Supply and Laying Double wall corrugated pipe(DWC pipe, Specification-120 mm OD/103 mm ID) for laying XLPE LT UG cable by DWC pipe throughout the LT cable length in pieces of convenient lenth .(Note : in pieces for easy rectification during fault ). |
| 111 | 5. Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm 2 core complete all as specified and directed. |
| 112 | Boring of holes under road ,pavement,hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower including passing HDPE 150 mm dia suitable for 0.4 mpa working pressure. |
| 113 | S&F GI tubing light grade 40mm dia for protection of cable on pole/wall etc complete all as specified and as directed by Engr-in-charge. |
| 114 | Taking down carefully (aluminium) point wiring complete of any type (batten/ surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as spcified and directed. |
| 115 | Taking down old U/S existing DB TPN 4 way & DB SPN 8 way including MCB/MCCB/Industrial plug socket of any capacity and any size and removing from site and making good the disturbed surface of wall etc complete all as specified and as directed. |
| 116 | M & L for point wiring for one light/fan/bell/buzzer point controlled by one way switch with 2.5 sqmm single core PVC insulated and sheathed multi stranded copper conductor FRLSH cable 1100 volts grade (ISI Marked) including 2.5 sqmm single core PVC insulated and sheathed multi stranded copper conductor FRLSH cable 1100 volts grade (ISI Marked) as continues earth wire in green colourto coomon earth dolly laid/drawn into and includingnon metalic PVC concealed conduit (medium duty, ISI marked not less than 20 mm dia) with all fittings such as tee, bends etc all as per IS terminated in& including new modular metal flush boxes of requisite module concealed in wall for mounting fittings like modular Switches, sockets, regulators etc with and including modular cover plates with frame of requisite modules all as specified and as directed:Notes:- (i) Cost of cutting/leaving forming chases for conduit, sinking for metal flush boxes and making good in CM 1:4 shall deemed to be included in quoted rate of this item. (ii) The quoted rates of this item shall deemed for include for modular metal flush boxes of requisite module and modular cover plate with frame of requisite module of colour as approved by GE |
| 117 | One light/fan/ex-fan point controlled by oneswitch |
| 118 | One 3 pin 5 Amps Socket outlet on same board. |
| 119 | One 3 pin 5 amps socket on independent board. |
| 120 | All as per item no 113 above but with 2.5 Sqmm copper wire for 3 pin socket outlet 15 Amp on independent board complete and all as directed by Engr-in-charge. |
| 121 | S&F switch Modular type, 6 Amp, 1 module single pole one way, 230 Volts, Modulartype complete all as specified and as directed by Engr- in -charge. |
| 122 | S&F switch Modular type, 16 Amp, 1 module single pole one way, 230 Volts, Modulartype complete all as specified and as directed by Engr- in -charge. |
| 123 | M&L socket outlet 3 Pin6 Amps modular type, 2/3 pin combined 2 module230 Voltscomplete all as specified and directed by Engr-in-Charge. |
| 124 | S&F socket outlet 3 Pin 6/16 Amps modular type, 2/3 pin combined 2 module230 Voltscomplete all as specified and directed by Engr-in-Charge. |
| 125 | S&F ceiling rose, surface backelite , three terminal AC, 230 voltcomplete all as specified and directed by Engr-in-Charge. |
| 126 | Supply and fixing fan step regulator modular type,120W -2 module electronicsocket typefive step controlled 230V AC 50 Hz forcomplete all as specified and directed by Engr-In-Charge. |
| 127 | S&F LED tube light fitting, 1x 20watts, 230 volt, basic all purpose surface and wall mounted led batten with polycarbonate housing & integrated electronic driver, pre-wired and fixed on walls with all fixing accessories such as screws, clips etc and connecting up with two core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge. |
| 128 | M & L Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings . |
| 129 | Supply and fixing LED Bldg Security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engr-in-Charge. |
| 130 | S&F sheet metal enclosures MCB DB, double door,Vertical TPN 4 way with200 Amps rated busbar all as specified and as directed.Make:-Hegar/Legrand/Seimens. |
| 131 | S&F double door, sheet metal enclosure, power coated for MCB DB SPN 12 way fitted with neutral link,earth bar,din rail and 200 amps rated bus bar 230 volt confirming to IS 13032-1991 complete all as specified and as directed by Engr--n-charge. |
| 132 | S & F MCB SPN, 5-32 Amps, 240 volts, breaking capacity 16KA complete all as specified and as dircted by Engr-in-charge. |
| 133 | S & F MCB SP, 5-32 Amps , 240 volts, breaking capacity 10KA complete all as specified and as dircted by Engr-in-charge. |
| 134 | S & F MCC 63 amps,4 pole,415 volts,fixed type breaking capacity 16KA complete all as specified and as dircted by Engr-in-charge. |
| 135 | Taking down fan,sealing cable end,dismantling blades and removing fan and blades and deposited to MES store. |
| 136 | Supply and hanging/fixing ceiling fan 1200mm sweep AC supply (input voltage range 120 to 280v), BLDC type, 5 star rated BEE and ISI marked, super enameled copper winding of \"B\" class insulation, single phase 20 watt (+ 10%), PF 0.90 (MIN), air delivery of 220 CUM per min (CMM), 350 RPM (+ 10%), TEMP RISE 40 DEGREE MAX, without remote, with electronic regulator, 3 blades, down rod including accessories, total harmonic less than 10%, 5 speed, hanging in position, including making connection wih and including flexible cord twin core twisted copper conductor of size 23/0.0076 from cealing rose to fan complete all as specified and as directed.Note :- (i) Sl No of cealing fan and GE office name shall also be writing on fan with red colour permanant marker. Cost for the same shall deemed to be included in quoted unit rate. Nothing shall be paid extra on this account. |
| 137 | Earthing complete with galvanised steel pipe electrode, 32mm bore, medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthing lead of 6mm dia galvanised iron or steel wire all as shown in Plate No. 2 to the earthing test point all as specified and indicated including testing on completion |
| 138 | Supply ,Laying and testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core |
| 139 | Excavation in trenches in soft/loosesoil not exceeding 1.5 meter wide and not exceeding 1.5 mtr in depth for route of cable and getting out complete all as specified and as directed by the Engr-in-charge. |
| 140 | Returning, filling in soft/loose soil including spreading, leveling watering and well ramming, in layers not exc 25 cm complete all as specified and as directed by the Engr-in-charge. |
| 141 | Removing of surplus soil to a distance not exc. 50 mtr and depositing where directed at a level not exc. 1.5 mtr above the starting point complete all as specified and directed by Engr-in-charge. |
| 142 | Supply and Laying Double wall corrugated pipe(DWC pipe, Specification-120 mm OD/103 mm ID) for laying XLPE LT UG cable by DWC pipe throughout the LT cable length in pieces of convenient lenth .(Note : in pieces for easy rectification during fault ). |
| 143 | S&F GI tubing light grade 40 mm dia for protection of cable on pole/wall etc complete all as specified and directed. |
| 144 | S&F GI bracket made out of 40 mm bore GI pipe light grade /medume grade, ISI marked, medium grade 1.2m long bent to shape suitable for fixing of street light fitting including with 2 Nos MS clamps made with 40x3mm flat iron, bolts, nuts, washers etc including two coats of synthetic enamel paint over one coat of zinc chrome primer and fixing on electric pole complete all as specified and as directed by Engr-in-Charge. |
