|
| 1 | Taking down cement plaster from brick/concrete surface including racking out joint hacking for key scrubbing down with water etc complete all as specified and directed. |
| 2 | M & L Rendering 15 mm thick onfair faces of brick work or concrete surfaces of wall in cement mortar 1:6 forfair finishedcomplete all as specified and directed. |
| 3 | M & L for 15mm thick rendering in two layer on brick work or concrete surface of wall. 5mm thick plaster in CM:1:4 mixed with WPC @ 3% by weight of cement surfacefinished even and smooth without using extra cement over 10mm thick plaster in cement mortor 1:6 complete all as specified and directed. (Note : WPC shall be measured & paid separately) |
| 4 | M&L Rendering 05 mm thick onfair faces of brick work or concrete sur-faces of ceiling in cement mortar 1:3for finished even and smooth (without using extra cement) |
| 5 | Supply only water proofing compound (Dr Fixit Pidifin/ Fosroc/Sika) |
| 6 | M & L for preparingnew plastered surfaces of wall and applying two coats of oil bound distemper overa coat of 2mm average thickwater proof birla/ equivalent wall care putty and one coat of alkali resitant primer all as specified and as directed. |
| 7 | M & L for prepartion newly plastered surface of ceiling and applying two coat of oil bond distemper complete all as specified and directed. |
| 8 | M& L for applying Twocoats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 9 | M & L for complete removal of old existing treatment completely by scrapping and or rubbing of wall and applying two coats of oil bound distemper over a coat of 2mm averagethickness birla/ equivalent wall care putty and one coat of primer all as specified and as directed. |
| 10 | M&L for complete removal of all existing treatment and preparing surfaces of walls andapplying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfacescomplete all as specified and directed by Engineer - in – Charge |
| 11 | M & L for preparation of old surface of wall and applying two coats of oil emulsion bond distemper, complete all as specified and as directed. |
| 12 | M & L for preparation of old surface of wall and applying single coats of oil emulsion bond distemper, complete all as specified and as directed. |
| 13 | M & L for preparation of old decorated plastered or unplastered surface of ceiling and applying one coat of oil emulsion distemper complete all as specified and as directed. |
| 14 | M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm width of girth and applying a coat of synthetic enamel paintall as specified and directed by Engineer-in-Charge. |
| 15 | M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10 cm width of girth and applying a coat of synthetic enamel paintall as specified and directed by Engineer-in-Charge. |
| 16 | M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm width of girth and applying a two coat of synthetic enamel paint over a coat of pink primer all as specified and directed by Engineer-in-Charge. |
| 17 | M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10 cm width of girth and applying a two coat of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and directed by Engineer-in-Charge. |
| 18 | M & L for preparation of old painted woodenand wood based surfaces of any description n exc 10cm width or girth when unconnected with other painting or when painted in different tint and applying one coat of synthetic enamel paint (any tint/shade) complete all as specified and as directed. |
| 19 | M & L for prepation of old painted steel and iron surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying one coat of synthetic enemel paint (any tint/shade) complete all as specified and as directed |
| 20 | Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars, etc, |
| 21 | M & L for Brickwork with sub class ‘B’ bricks straight or curved on plan exc 6 mmean radius built in CM 1:6 |
| 22 | M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius inhalf brick thick walls built in CM 1:4 |
| 23 | Demolition of stone slabs and tiles of any description or thickness in floors & wall, laid bedded & pointed in any mortar. |
| 24 | M&L fornon skid colourceramictile 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm , as in floors etc set over and including high performence adhesive manufactured by somani ezifix tile adhesive or equivalentmixed in cement as per manufacturer instructionand jointed with polymer modified cementetious grout manufactured by somani ezy grout or equivalnet of pigment matching to tile colorincluding screed bed or bedding layer of mortar 15 mm thick for laying floor finishes withCM 1:4 (Tile pattern and decoration may be as suggested by Engineer-in-charge). |
| 25 | M&L fornon skid colour ceramictile of size 600x600mm, 7 to 8 mm thick area of each tile, exceeding 0.18 sqm but not exceeding 0.38sqm , as in floors etc set over and including high performence adhesive manufactured by somani ezifix tile adhesive or equivalentmixed in cement as per manufacturer instructionand jointed with polymer modified cementetious grout manufactured by somani ezy grout or equivalnet of pigment matching to tile colorincluding screed bed or bedding layer of mortar 15 mm thick for laying floor finishes withCM 1:4 (Tile pattern and decoration may be as suggested by Engineer-in-charge). |
| 26 | M&L for Virified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tilesnot exceeding 0.36 sqm,as in floors etc set over and including high performence adhesive manufactured by somani ezifix tile adhesive or equivalentmixed in cement as per manufacturer instructionand jointed with polymer modified cementetious grout manufactured by somani ezy grout or equivalnet of pigment matching to tile colorincluding screed bed or bedding layer of mortar 15 mm thick for laying floor finishes withCM 1:4 (Tile pattern and decoration may be as suggested by Engineer-in-charge). |
| 27 | M&L for non - skid colour ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat 10 mm thick in CM 1:3, complete all as specified. |
| 28 | M & L for Glazed ceramic coloured walls tilesin vertical surfaces 300x450x 6mm to 7 mm thick set over and including 10mm thick rendering on vertical surface of wall or concrete surfacesin CM 1:3 to receive wall tiles including necessary adhesive (Tile pattern and decoration may be as suggested by Engineer-in-charge). |
| 29 | S & F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 30 | S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 31 | S&F for mild steel Framed work as in doors orgates or grill/grating of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing completeall as specifed and directed. |
| 32 | M & L for 20-25 mm thick machine cut green marbel stone as in floor, steps (in single piece),cooking platform, cills of window etc laid over 15 mm thickcement screed and jointed withbase laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including cement mortar 1 : 4 complete all as specified and as directed. |
| 33 | M & L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mouldingand polishing complete including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes withC M 1:6 |
| 34 | S&F in repairs sinks made of stainless steel 1 mm thick kitchen with plugs , washers and waste , including bedding in cement mortar on to dwarf wall or including fixing cantiliver brackets and connecting union to pipe , overall size 915mm x 460 mm & bowl size 410mmx330mm x 160mm complete all as directed by EIC |
| 35 | S&F in repairs stainless steel plate rack of size 880x880x220mm, 23 guage thick all as approved and directed |
| 36 | Taking down and refixing in the same opening of shutter of any descriptionn.exc 1 sqm each |
| 37 | Taking down and refixing in the same opening ofshutter of any description exc 1 sqm and n.exc 2 sqm each |
| 38 | S & F 35 mm thick, flush shutters, solid core construction, with blockboard core and plywood face panels, commercial type on one side and the other side covered with decorative face veneer with lipping/ frame to match |
| 39 | M&L for Teak wood lipping, 3 to 6 mm thick fixed with nail for 18/19 mm thick block board |
| 40 | S & F in repairs factory made 18 (+ 0.7 mm) thick PVC sheet one sided decorative and other side white prelaminated sheet cabinate shutters and interior. 18mm (+ 0.7 mm) thick sheet of density 600 kg/m3 bent at 90 degree and finished all edges at all level for making edges, Lipping/bending or 0.5mm thick PVC sheet lipping at ll four edges using bonding tape etc complete all as per directed (Shade will be approved by the Engr-in-Charge/ GE. |
| 41 | S&F Butt hinge, medium wight, cold rolled mild steel of 100 mmsize |
| 42 | S & F Butt hinge, medium weight, cold rolled mild steel of 75 mmsize |
| 43 | S&F 150mm aluminium alloy handles cast type anodised all as specified |
| 44 | S&F 100mm aluminium alloy handles cast type anodised all as specified |
| 45 | S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed. |
| 46 | S&F 125mm aluminium anodised barrel tower bolts of extruded section and fixed. |
| 47 | S&F 300 mm Aluminium alloy, anodisedsliding door bolt with hasp, staple (Bolt Type) and fixing , clips of sheet of extruded sections and fixing bolts. |
| 48 | S&F 250 mm Aluminium alloy, anodisedsliding door bolt with hasp, staple (Bolt Type) and fixing , clips of sheet of extruded sections and fixing bolts. |
| 49 | S&F 100 mm size Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws |
| 50 | S&F in repairs 4.00 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane. |
| 51 | S&F in repairs 4.00mm thick figuredglass, pin head typeand glazing with oil putty in square n exc 0.5 sqm in each pane. |
| 52 | S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples. |
| 53 | M&L securing sheet glass 4.00 mm thick, ordinary quality in existing wooden frames glazed with putty/beadsin square n exc 0.5 sqm in each pane including removing loose or decayed putty/beads,painting/oiling one coat on rebates, grooves, reputtying and painting /oiling putted surface to match existing work (New length of frame reputitied shall be measured) |
| 54 | S&F 2nd class HW Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n exc 200 cu. cm each |
| 55 | S & F in repairs 25mm dia stainless steel 202 grade tubular curtain rod as directed |
| 56 | S & F in repairs stainless steel socket fancy type with bracket for 25mm dia stainless steel tubular curtain rod (design of socket shall be approved by GE/AGE at the time of execution) as directed |
| 57 | S&F in repairs 15mm bore brass bibtap , chromium plated fancy type screwed for iron pipe or brass ferrule complete |
| 58 | S&F in repair 15 mm diabrass Pillar taps, chromium,plated fancy typefixed to iron pipe or brass ferule |
| 59 | S&F in repairsstop valves for 15 mm bore brass chromium plated stop valve fancy type with long shank concealed type fixed to iron pipe or for brass ferrule |
| 60 | S&F in repairs chromium plated shower rose with swivel joints including fixing to GI pipe for 125mm dia |
| 61 | S&F in repairs brass CP mixer for mixing hot & cold water three way screwed down for iron pipe 15mm bore and fixed complete |
| 62 | S&F in repairs CP Soap dish, fixed to plugs with chromium plated brass screws. Make : Prayag (Cat No BA-45) or equivalent make. |
| 63 | S&F in repairglass shelf (450x150mm)with chromium platedguard complete all as specified and directed. |
| 64 | S&F in repairs Vitreous China wash down water closet (pedestal pattern) and trap white including fixing bolts, WC seat cover of fixed with aluminium or ms chromium plated complete all as specified. |
| 65 | S&F in repairs PVC water closet seat cover, white colour, closed pattern with flat bottom, and cover andmild steel chromium plated or aluminium hinging device complete all as specified. |
| 66 | S&F in repairs for PVC low level flushing cistern, white, 10 Ltrs capacity complete with all internal accessories & fixed to wall & making good to wall surfaces incl. taking down existing flushing cistern complete. |
| 67 | S&F in repairs toilet jet sprey made out of stainless steel flexible tube of 15 mm dia , all as specified and directed |
| 68 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified all as specified and directed |
| 69 | S&F in repairs Vitreous China wash hand basin, flat back 550 x 400mm white excluding taps, waste chains and plugs and porcilain stopper but including bracket |
| 70 | M&L in repairs 32mm waste fittings, brass , chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed. |
| 71 | S&F 40 mm bore low density polyethylene pipe (LDPE) of pressure rating 6 Kgs/cm2 as in waster pipe |
| 72 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm |
| 73 | S&F in repairs 600mm x 450mm bevelled edge mirror of selected quality glass, 5mm thick mounted on 6mm thick AC building board and around aluminium lipping fixed to wooden plugs with chromium plated brass screws and cup washers Make : Modi Guard / Saint Gobin / Hariyana Glass. |
| 74 | S&F in repairs cabinate mirror rectangular shape with selected quality mirror and PTMT frame with opened door shutter with acrylic frame oustside mirror at famed of overall size 400 mm X 500 mm with sheles in side suitabele for Bath room complete all as specified and directed. Make prayag or equivelent |
| 75 | S&F in repairsfor brass chromium plated tubular towel rail, 20mm dia, D-type, 60cm long between flanges as in repairs. |
| 76 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land all as directed by Engr-in-Charge. |
| 77 | S&F 15mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors (concealed type)all as directed. |
| 78 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land all as directed by Engr-in-Charge. |
| 79 | S&F 20mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors(concealed type) all as directed. |
| 80 | Refixing of 20 mm bore steel tubing and connections in new or old position (Walls, Ceiling, floors, etc) |
| 81 | Taking up or down 25mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land all as directed by Engr-in-Charge. |
| 82 | S&F 25mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors all as directed. |
| 83 | Refixing of 25 mm bore steel tubing and connections in new or old position (Walls, Ceiling, floors, etc) |
| 84 | Disconnecting existing tanks of of capacity exceeding 500 Ltr but not exceeding 1000 Ltr , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing,etc.) |
| 85 | Dismantling water tank and removing to store of exc 250 lit but n exc 500 lit capacity |
| 86 | Dismantling water tank and removing to store ofexc 500 lit but n exc 1000 litcapacity |
| 87 | S&F 1000 Ltrs Rotational moulded triple layered, polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I IS 12701-1996. |
| 88 | S&F 500 Ltrs Rotational moulded triple layered,polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I IS 12701-1996. |
| 89 | S&Fin repairs Ball brass valves, for 25 mm bore of pipe high pressure, with polythene float and fly- nut complate, screw-wed for iron pipe or brass ferrule and fixed |
| 90 | Taking down PVC/CI pipe of any pattern size including all fittings etc. and cleaning for refixing or removal outside MD land |
| 91 | S&F in repair 100/75 mm dia CP grating with hole or without hole fixed to existing NT/FT. |
| 92 | S & F in repair 75mm PVC (SWR) floor trap, plain with CP grating including jointing with solvent all as specified and as directed. |
| 93 | S&F in repairs 110mm dia PVC SWR pipe single socketed in any length with rubber ring joints fixed to walls |
| 94 | S & F in repairs 110mm dia PVC SWR bendwith oval access door |
| 95 | S&F necessary weldings in repairs length exc 2.5 cm but n exc 5cm thick of metal to be welded thickness of metal welded exc 20mm but n exc 25mm. |
| 96 | M& L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete as specified anddirected by Engr-in - charge |
| 97 | S & F in repairs 6mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work complete all as specified anddirected |
| 98 | Repairs to joinery works such as easing of doors, windows, kitchen cabinets, refixing builder hardware gauge etc by providing glue nails and screws to the satisfaction of user and rectifying other misc minor carpentry works assigned by the Engineer in Charge. (Note : Replacement of builders hardware if required shall be measured and paid separately). |
| 99 | Repairs to plumbing/internal water supply works such as repair to leaking taps, pillar taps, mixers, stop cocks by tightening and providing washer repair to float valves, low leveled cistern by mixture adjustments leaking water supply lines by tightening the GI fitting or refixing W/S or sanitary fixtures using thread/teflon tapes and including small GI fittings such as GI elbow, socket, union etc as required at site to the satisfaction of user as assigned by the Engineer in Charge. (Note : Replacement of fittings and fixture like bib tap, pillar tap etc, if required shall be measured and paid separately). |
| 100 | S&F in repairs floor door stopper of aluminium alloy body and tongue, overall length of cover plate 140mm anodised with hard drawn steel spring, fixed in floors complete all as specified and directed. |
| 101 | S&F in repairs EWC anti microbial seat cover hygenic type for padestral pattern complete all as specified and directed. |
| 102 | S&F in repairs mill steel Chromium plated toilet paper holder of standard size fixed with wall. |
| 103 | S&F in repairs mild steel helical door spring 150mm ordinary rat tail rod pattern springs including roller plate, bolting, welding etc. complete. |
| 104 | S&F in repairs mild steel helical door spring 300mm ordinary rat tail rod pattern springs including roller plate, bolting, welding etc. complete. |
| 105 | S&F in repairs door sill of any size made up of rubber at the bottom and top is of aluminium sheet including screwing to protect from rats, snakes etc. complete all as specified and directed. |
| 106 | S&F in repairs, magnet door stopper of size round or rectangular including all fittings fixed complete all as specified and directed. |
| 107 | S&F in repairs, chromium plated peg set for hat and coat hooks including all fittings fixed complete all as specified and directed. |
| 108 | S & F SS W Hinges SS 202 Grade steel RustResistance , for fixing cup boords shutters sizes of hinges 3\" to 4\" and 1.5 mm thickness, suitable for 18 mm thick cabinets shutters complete all as specified and directed |
| 109 | S&F in repair 18mm thick HDHMR BOARD exterior grade including any coloured prelaminated sheet of required thickness over HDHMR board, anti fungal, moisture resistance, anti borer as per IS 14587 for frame and shutter for kitchen cabinets/cupboards etc all as per specified and directed by Engr-in-charge. Note: sample as approved by GE. Make: Action Tessa/Greenply/Century. |
| 110 | S&F in repair 18mm thick HDHMR BOARD exterior grade including white coloured prelaminated sheet of required thickness over HDHMR board, anti fungal, moisture resistance, anti borer as per IS 14587 for frame and shutter for kitchen cabinets/cupboards etc all as per specified and directed by Engr-in-charge. Note: sample as approved by GE. Make: Action Tessa/Greenply/Century. |
| 111 | S&F in repair stainless steel cabinet/drawers handle having a length of 250mm and shape all as specified and directed. |
| 112 | Taking down carefully copper/aluminum pt wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs, & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor etc. |
| 113 | M&L for point wiring with 1.5 Sqmm PVC insulated FRLS, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC Casing -n-caping /conduit of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green for the followings:- |
| 114 | For one light point or fan point controlled by one switch all as directed by Engr-in-charge |
| 115 | For one Call Bell point controlled by one push button switch all as directed by Engr-in-charge |
| 116 | For5Amp independent socket point controlled by one switch all as directed by Engr-in-charge |
| 117 | For one 3 pin ,5 Amp socket point with other switch on the same board all as directed by Engr-in-charge |
| 118 | All as per item No 113 here in before but for power point wiring usingwith 2.5 sqmm PVC FRL insulated ,unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade copper conductor, stranded 2.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green. |
| 119 | M&L for concealed point wiring with 1.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit,, including of junction and terminal boxes,all fittings such as tees, bends, elbows,etc. of External diameter 20mmall as per site requirements including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green for the followings:- . |
| 120 | For one light point or fan point controlled by one switch all as directed by Engr-in-charge |
| 121 | For one Call Bell point controlled by one push button switch all as directed by Engr-in-charge |
| 122 | For5Amp independent socket point controlled by one switch all as directed by Engr-in-charge |
| 123 | For one 3 pin ,5 Amp socket point with other switch on the same board all as directed by Engr-in-charge |
| 124 | All as per item No 115 here in before but for power point wiring usingwith 2.5 sqmm PVC FRLSH insulated ,unsheathed, copper conductor stranded 1100 volt grade copper conductor, stranded 2.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green. |
| 125 | M&L for concealed point wiring with 1.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit of size not less than 20mm ISI marked ivory white With all accessories,includingmodular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows,etc. all as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge for the followings:- |
| 126 | For one light point or fan point controlled by one switch all as directed by Engr-in-charge |
| 127 | For one Call Bell point controlled by one push button switch all as directed by Engr-in-charge |
| 128 | For5Amp independent socket point controlled by one switch all as directed by Engr-in-charge |
| 129 | For one 3 pin ,5 Amp socket point with other switch on the same board all as directed by Engr-in-charge |
| 130 | For one light, point controlled by two wayswitch |
| 131 | All as per item No 117 here in before but for power point wiring usingwith 2.5 sqmm PVC FRL insulated ,unsheathed, copper conductor stranded 1100 volt grade copper conductor, stranded 2.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green. |
| 132 | S&F Modular switch, one way,6 Amp 230 volt, 1 module . |
| 133 | S&F Modular switch, two way, 6 Amp 230 volt, 1 module. |
| 134 | S&F modular socket 6 Amp-2/3 pin combined 2 module . |
| 135 | S&F Modular switch, one way,6 A/16 Amp 230 volt, 1 module . |
| 136 | S&F modular socket 6 A/16-2/3 pin combined 2 module . |
| 137 | S&F Modular fan step regulator 120 Watt -2 module . |
| 138 | S&FModular bell push 6A one module . |
| 139 | S&F switch piano type flush, single pole, one way 5 A 230 V. |
| 140 | S&F socket outlet, 5 pin, 5 Amp, flush type, 230 V. |
| 141 | S&F switch piano type flush, single pole, one way 15 A 230 V . |
| 142 | S&Fsocket outlet2 in 1,6 pin, 5/15 A, flush piano type240 V. |
| 143 | S&F ceiling rose, surface backlite,three terminal. |
| 144 | S&F lamp holder insulated with back plate suitable for Angle/Batten fitting. |
| 145 | S & F in repair/replacement bell ding dong 230 V, single phase. |
| 146 | S&F bell push flush type one way 5Amp 240 Volt. |
| 147 | M&L concealed sub main wiring with two single core PVC FRLS insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size4 sqmm (for main current) drawn in & incl PVC conduit not less than 20mm dia ISI markedwith all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of01 Single core of size 4 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as directed by Engineer-in-Charge Note : Two runs of single core 4.0 sqmm and one run of 4.0 sqmm copper FRLS cable as earth continuity conductor and suitable size conduit with accessories shall be measured as one length. |
| 148 | M&L concealed sub main wiring with two single core PVC FRLS insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size2.5 sqmm (for main current) drawn in & incl PVC conduit not less than 20mm dia ISI markedwith all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of01 Single core of size 2.5 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as directed by Engineer-in-Charge Note : Two runs of single core 2.5 sqmm and one run of 2.5 sqmm copper FRLS cable as earth continuity conductor and suitable size conduit with accessories shall be measured as one length. |
| 149 | Supply and fixing LED lights fittingmade of Aluminium extrusion 1x 20W (4 feet) , input voltage 140-270 V AC,CCT 6500K, Lumin efficency 100 lm/watt ,surge protection upto 4KV , Voltage protection upto 440 V AC.PF >0.9 , connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed byEngr -in -charge. Note :Warrenty on light should be of minimum 02 Years provided by contractor. |
| 150 | Supply and fixing LED light fitting made of Aluminium extrusion mirror type with high out put diffuser 1x10 watt 2 feet, input voltage 140-270 V AC,CCT 6500K, Lumin efficency 100 lm/watt ,surge protection upto 4KV , Voltage protection upto 440 V AC.PF >0.9 with driver including connecting up with flexible copper conductor cable of suitable size complete all as specified and directed by Engr in charge.Note : Warrenty on light should be of minimum 02 Years provided by contractor. |
| 151 | S&F metal clad box enclosure with socket plug top and MCB SP 20 Amps flush mounting enclosure with 2 pin and earth plug socketincluding taking down. complete all as directed by Engineer-in-Charge . |
| 152 | S&F Modular AC box enclosure with socket plug top and MCB SP 20 Amps flush mounting enclosure .complete all as directed by Engineer-in-Charge .Make- Legrand/ L&T/Havells/hpl |
