|
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil. |
| 2 | M & L for Cement concrete type D2 1:4:8 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and ditected by Engr-in-Charge. |
| 3 | Material and labour for Modular Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built inand setting in mortar CM 1:6, complete all as specified and as directed by engr-in-charge. |
| 4 | M&L for Precast cement concrete block masonry 1:3:6 type C1 with solid block exc 10cmin width and setting in cement morter 1:6 complete all as specified and ditected by Engr-in-Charge. |
| 5 | M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surface and finishing the surface even and smooth without using extra cement secified and directed by Engr-in-charge. |
| 6 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces finished even and smooth in cement mortar 1:6, complete all as specified |
| 7 | M&L for preparation of newly plastered surface of wall and applying two coats of distemper oil emulsion over and including 3 mm thick wall care putty and a coat of alkali resistance primer etc. complete all as specified and directed by Engr-in-Charge. |
| 8 | Material & Labour for applying Two or more coatsof 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance asper IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including primingcoat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces of wall etc. complete all as specified and directed. |
| 9 | M&Lfor Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all asspecified and as directed. |
| 10 | M&L for hardcore of guge n exc .63 mm broken stone or boulder, deposited, spread and levelled in layers n exc. 15 cm thick waterd and rammed to a true surface complete all as specified and as directed by engr-in-charge. |
| 11 | M&L for 100 mm thick P.C.C 1:4:8 type D-2 in sub base of floorcomplete all as specified and directed by Engr-in-Charge. |
| 12 | M & L for 25 mm thick PCC 1:2:4 type B1, 12.5 mm graded stone aggregate as in flooring including finishing cement concrete rough surface with out using extra cement. |
| 13 | M & L for non skid coloured ceramic tiles 7 to 8mm thick square / rectangular area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor laid over 15 mm thick screed bed in CM 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surface of tile complete all as specified and directed by Engr-in-charge. |
| 14 | M & L for Glazed ceramic coloured tiles of size 350 mm X 450 mm X 7 mm thick as on vertical surfaces such as skirting, dados and rises to steps etc. over 10mm thick rendering in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed. |
| 15 | Returning filling in including speading,leveling ,watering and well ramming in layers not exc 25 cm in soils complete all as specified and directed by Engr-in-Charge. |
| 16 | Removing of excavated Soil n exc 50m and depositing where directed at a level n.exc 1.50m above the starting point. |
| 17 | M&L for 50 mm thick PCC 1:3:6 type C2 in plinth protection finishing even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 18 | M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, bands, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed. |
| 19 | M & L for providing pre-cast cement concrete landing, cover slabs (for man holes etc), chullah hoods, chajjas, water troughs, mangers, shelves and similar items with plain faces in cement concrete 1:2:4 type B-1, using 20 mm graded stone aggregate and setting in cement mortar 1:6 complete all as specified and directed. |
| 20 | M & L for Reinforce cementconcrete Type B1 1:2:4 (20 mm graded aggregate)in chajja complete all as specified and directed. |
| 21 | M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 22 | Supply & Fixing PVC door frame (50x47) mm made out of plain colour 5 mm thich PVC Sheet re in forced with MS Square Tube, supplying & fixing in opening as per specification & drawing |
| 23 | S&F factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC \" C \"Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing. |
| 24 | S & F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engr In Charge. |
| 25 | S&F Rolled Sections as in main croos beams , hip and jack rafters; purlins, where connected to common rafter , posts etc. conf to Fe-410-w(gdeE-250 quality-A) etc. use for bracing, staging also complete all as specified and directed by Engr In Charge. |
| 26 | M &L for MS work as in wind tie or any other work incl cutting, drilling holes etc complete all as specified and directed by Engr-in-Charge. |
| 27 | Material & labour for two coats of synthetic enamelled paint over a coat of red oxide on new steel surfacesexc 10cm width or girth including preparation of surfaces.complete all as specified and directed by Engr in Charge. |
| 28 | S & F Anodised Alu. Snap grid 605x605 mm frame wk including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified for false ceilingall as specified |
| 29 | M&L 9mm th Acoustical board/tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed in celing with screws toframe work or with staples on snap gridcomlplete as specified |
| 30 | S&F1000 Ltrs capacity PVCRotational Moulded polyethylene water storage tanks (Cylindrical vertical with closed top)double layer hoisted and fixed in position including float valveall as specified and directed by Engr-in-charge.. |
| 31 | M&L for reinforced cement concrete pipes class NP-2 , laid in trenches & jointed complete with collars, dia of pipe150 mm . |
| 32 | M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in bed to drain pipes, incl packing under & hauching against the sides of pipes after they are laid and tested for 150 mm bore RCC pipe. |
| 33 | S & F 15 mm dia of pipe Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed.complete all as specified and directed by Engr In Charge. |
| 34 | S & F 20 mm dia of pipe Gun-metal, globe or gate valvees with iron wheel head, screwed both ends for iron pipe and fixed.complete all as specified and directed by Engr In Charge. |
| 35 | S&F 16 mm bore CPVC pipe SDR 11 & Plain CPVC SDR 11 fittings with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr In Charge.. |
| 36 | S&F 20 mm bore CPVC pipe SDR 11 & Plain CPVC SDR 11 fittings with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr In Charge.. |
| 37 | Supply and fix in repairs for vitreous china EWC of white colour with plastic water closet seat closed pattern with flat bottom (with MS or CP hinging device) and fixing bolts, including connection todrain or out going pipe and to PVC flusing pipe, antisyphonage pipe and all necessary fittings etc complete all as specified and as directed. |
| 38 | S & F PVC valveless, syphonic action type, 10 ltr flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, CP down pipe and connecting to the WC and making good to the floor with PCC including waste pipe all as specified and directed. |
| 39 | S & F for Wash Hand basins, Vitreous China, white, flat back, size 550x400mm, including cutting for and pinning in ends of brackets or erecting stand, angle bracket (but including of supply, waste pipe, taps) complete all as specified and directed. |
| 40 | S&FCPbib taps 15mm diafancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed. complete all as specified and directed by Engr In Charge. |
| 41 | S&F 15mm dia stop valves , fancy type chromium plated, screwed down,screwed both ends for iron pipe or for unions and fixed. complete all as specified and directed by Engr In Charge. |
| 42 | Supply & fixing15mm pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down , high pressure, with or without lettered \"Hot\" or Cold\" with long screwed shanks and fly nuts, screwed for iron pipe and fixed. Bore of pipe in 15mm complete all as specified and directed by Engr In Charge. |
| 43 | S&F for waste coupling of PTMT for 32 mm bore dia of discharge pipe (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) |
| 44 | S&F PVC connections 15mm size with PTMT nuts of length 600mm |
| 45 | S & F cast iron Nahani trap 75mm out let dia with grating including jointing to waste pipefixed in cement concrete type B-1 (1:2:4). |
| 46 | S&F C Ifloor trap 75mm out let dia with grating including jointing to waste pipefixed in cement concrete type B-1 (1:2:4).. |
| 47 | M & L for Gully traps salt glazed stoneware (SGSW)square or round mouthed type \"P\" of size 180x100mmfor drain pipes complete all as specified and directed. |
| 48 | S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches. |
| 49 | S & F 75 mm dia bore PVC (SWR) pipes single socketed , in any length with rubber ring joints , laid in trenches or in floors |
| 50 | S & F75 mm diabore PVC (SWR) bends any radius |
| 51 | S & F110 mm diabore PVC (SWR) bends any radius |
| 52 | S & F110 mm diabore PVC (SWR) junction single \"T\" equal or unequal |
| 53 | S & F PVC (SWR) 110 mm borevent cowl |
| 54 | S & F in repairs 600mm X 450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed. |
| 55 | Material and labour for 20mm thick granite (of any type) work ( table rubbed and polished) in steps , jambs. pillars, window cills, cooking platforms and like in cement mortar (1:4), pointing in white cement (1:2) using marble dust with admixture of pigment to match withshade of granitescreed bed of mortar 15 mm thick in cement mortar (1:6) for laying floor finishescomplete all as specified and as directed. |
| 56 | Supply and fix Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 57 | S&Ffor pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 105 X 60mm. |
| 58 | S & F for 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides |
| 59 | M & L for two coats of synthetic enamel paint to new steel surfaces over a coat of red oxide primer surfaces of any description exc 10 cm in witdth or girth complete all as specified and directed by Engineer-in-Charge |
| 60 | M & L forPreparation of wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer surfaces of any description exc 10 cm in witdth or girth complete all as specified and directed by Engineer-in-Charge |
| 61 | S & F of 100 mm long aluminium anodised barrel tower boltcomplete all as specified and directed. |
| 62 | S & F of 100 mm long extruded anodisedaluminium alloy handle,complete all as specified and directed. |
| 63 | S&F 100 mm MS, Butt hinges,medium weight cold rooled fixed with screw or welding complete. |
| 64 | S & F of 250 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt or cast aluminium alloy complete all as specified and directed. |
| 65 | M & L for Sand filling under floors or in foundations including watering and consolidation all as specified and as directed by Engr-in-charge. |
| 66 | S/Fanodised aluminium window and ventilator shuttersincluding frames ,(three track) fixed typewithout sash bar ,aluminium sectionweighing 0.55 kg/m. including necessary joining cleats ,glazing clips,rubber packing,anodised aluminium snap beading,screw with powder coating of any colour (thickness of powder coating not less than 50 micron ) including stainlesssteel wirecloth 0.36 mm nominal dia of wire and avg. aperture 1.40 mm and fixed with stainless steel wire staples and 3.0 mm th. sheet glass ordinary quality plain and glaizing complete all as specified and directed. |
| 67 | Supply and fixhume pipe septic tank 50 users capacity including all excavation earth work required and removal of soil, debris and connecting the new septic tank to the incoming sewer lines and connected to soak pit as directed. |
| 68 | Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 69 | M & L for 40 mm thick Cement Concrete 1:2:4 (using 12.5 mm graded stone aggregate) as in damp proof course (DPC) to horizontal or vertical surfaces including necessary form work and mixing of water proofing compound as per manufacturer’s instructions complete all as specified and directed. NOTE: - water proofing compound will be measured and paid separately. |
| 70 | M & L for Preparation of new previouslyplastered or unplastered surfaces of walls and applying two coats of oil bound distemper in approved colour/ shade over a coat of chalk whiting primer after preparation of surfaces complete. |
| 71 | M & L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint complete all as specified and directed. |
| 72 | M & L for 25 mm thick PCC 1:2:4 type B1, 20 mm graded stone aggregate as in flooring including finishing cement concrete rough surface with out using extra cement. |
| 73 | M & L for non skid coloured ceramic tiles 7 to 8mm thick square / rectangular area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in skirtingover 10 mm thick backing coat in CM 1:3 as in dados, skirting etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surface of tile complete all as specified and directed by Engr-in-charge. |
| 74 | M&L for 75 mm thick PCC 1:3:6 type C2 in plinth protection finishing even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.. |
| 75 | Supply only Liquid water proofing compound |
| 76 | Excavation in post holes (or similar hole) each n. exc. 0.5 cum, getting out, returning fillingand ramming earth or broken rubble mixed with earth around in layers n. exc. 25cmwatering and removing surplus soilto a distance n. exc. 50cm and making good surface in soft and loose soilcomplete all as specified and directed by Engineer-in-Charge |
| 77 | M & L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate ) as in foundation concrete for fencing post complete all as specified and directed by Engineer-in-Charge |
| 78 | M&L Supplying and laying of 25mm OD CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified |
| 79 | S & F for Vitreous China squatting pan (Orissa pattern) size 580mm X 440mm, white with integral foot rests, any pattern including provision of cement concrete bedding (excluding flushing cistern and flush pipe) complete all as specified and directed. |
| 80 | S&FCP bib taps 15mm diafancy type screwed down, screwed for iron pipe or for brass ferrule and fixed. complete all as specified and directed by Engr In Charge. |
| 81 | S & F CP Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms |
| 82 | S & F cast iron Nahani trap 110mm out let dia with grating including jointing to waste pipefixed in cement concrete type B-1 (1:2:4).. |
| 83 | S&F Anodised aluminium Powder coating frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 84 | S&FAnodised aluminium window and ventilator shutters,(three track) fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, srews with powder coating of any colour (Thickness or powder coating not less than 50 micron) including stainless steel wirecloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stanless steel wire staples. and 3.0 mm th sheet glass ordinary quality plain and glazing Complete all as specified and directed. |
| 85 | Supply and fixhume pipe septic tank 25 users capacity including all excavation earth work required and removal of soil, debris and connecting the new septic tank to the incoming sewer lines and connected to soak pit as directed. |
| 86 | M& L Chequered Cement Concrete Tiles 30 CM x 30 CM X 25 mm th set and jointed in cement slurry and pointed in neatgrey cement&pigment in floors over screed bed 15 mm thk in cm 1:6 .complete all as specified. |
| 87 | Dismantling mild steel work of any description not otherwise provided for any type of work etc. |
| 88 | S & F for Steel work in tubular section trusses, posts including special shapedwasher etc. complete usingERW or induction butt weldedtubes conforming to I. S.1161 -1979 grade St.-240andcurved or parabolic shape for trusses, distance places, cleats etc(beam, tee, angle, channel ) etc. complete all as specified and as directed by Engr-In-Charge. |
| 89 | S & F for Joist, medium channel (MC -150), angle or tee sections, fixed independently, without connecting plates, fixed on posts etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410 (Gde-E-250) etc. complete all as specified and as directed by Engr-in-Charge. |
| 90 | Dismantling Plain or corrugated steel (corrugated/ semi corrugated etc) sheet in roof covering complete all as specified and directed. |
| 91 | S & F for Curved shape Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 1.00 mm thick of an colour having tensile strength of 300 Mpa as in trussless roof system using mechanical technic fixed at ends/ support with 12 mm dia nut bolt of required length, spacing 300 mm centre to centre including necessary washers also fitted at any height with pressfit joint in roof sheets etc. complete as directed by Engr-In-Charge. |
| 92 | S & F for Hanger clint to roof for hanging lights, Chandelier , Chandelier lights, posters etc.complete as directed by Engr-In-Charge. |
| 93 | S & F UPVC of size 5.5\"\" x 7\"\" x 7.5\"\" (size in inches) corrugated square designed rainwater gutter 50 mm extra height on outer side to stop overflow caused during rain including MS Brackets at every 1.2 mtr spacing, Elbow drop 220mm, necessary joints, cleats and other arrangements for fixed etc complete as directed by Engr-In-Charge. |
| 94 | S & F PVC (SWR) pipes 110mm dia singlesocketed inany lengthwithrubber ring jointsfixed to walls, posts, trenches etc.complete as directed by Engr-In-Charge. |
| 95 | S & F PVC (SWR)bends110 mm diaradius fitted as per requirement and directed by Engr-in-Charge. |
| 96 | Supply,laying,jointing , testing and commisioningXLPE cable 1100 volts grade PVC insulated armoured & PVC sheathed with stranded aluminium conductor heavy duty ISI marked incl cable glands lugs bolts nuts washers etc to suit the cable size to be laid in trenches fixed along pole, LT pannel floor bore or through GI pipe laid under floors, Fixed, concealed in wall encased in GI pipe etc complete of following sizesincluding taking down old unserviceable over head conductors and insulators channels carefullyas directeed by engineer in charge |
| 97 | 16 Sqmmx 2 core |
| 98 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out all as specified and directed :- |
| 99 | Soft / loose soil |
| 100 | Hard dense soil |
| 101 | Returning, filling in soil, including spreading, leveling watering and well ramming in layers not exceeding 25 cmall as specified and directed. |
| 102 | Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point of any type of excavation all as specified and directed by Engineer -in-Charge. |
| 103 | M & L for HDPE DWC pipe ISI Marked fixed on walls, ceilings or in floors, trenches etc. for cable protection of the following outer dia :- Make:-Infra/Supreme/Prince |
| 104 | 40 mm dia |
| 105 | M&L for road cutting and making good with PCC 1:3:6 type C-2(using 40 mm graded stone aggregate) complete all as directedby Enger -in- charge. |
| 106 | M&L for point wiring with 1.5 sqmm multistranded copper conductor cable of PVC insulated and unsheahed type alongwith 1.5sqmm PVC insulated unsheathed single stranded copper conductor cable for continous earthing in & incl casing / caping or PVC Pipes & accessories having ISI markedsurface type to be fixed with proper screws/(MS steel strips if required) including hard PVC boards of suitable sizes & making arrangement for fixing switches, sockets, switch socket combination, fan, regulator setc for Note:-Screws used for fixing PVC boards, casing & caping ceilling rose square blocks etc should be nickel cadmium screws:- |
| 107 | (a)One light point controlled by one switch |
| 108 | (b) One fan point controlled by one switch |
| 109 | (c) One socket 5 pin 5 Amps flush type on independent board |
| 110 | (d) One socket 5 pin 5 Amps flush type on same board |
| 111 | M&L for point wiring with 2.5 sqmm single core multistranded copper conductor cable of PVC insulated and unsheathed type alongwith 2.5sqmm PVC insulated unsheathed single core multistranded copper conductor cable for continous earthing in & incl PVC casing / caping or PVC Pipes & accessories having ISI markedsurface type to be fixed with proper screws/ (MS steel strips if required) including hard PVC boards/Boxes of suitable sizes & making arrangement for fixing switches, sockets, switch socket combination, fan, regulator etcfor Note:-color coding to be followed as given R-Phase,B-Neutral & G- Earthing |
| 112 | S&F switch piano flush type single pole one way 5 Amps |
| 113 | S&F switch socket combination 2 in 1, 5 Amps flush type |
| 114 | S&F switch socket combination 2 in 1, 15 Amps flush type |
| 115 | S&F ceiling rose surface type 65 X 50mm, isolated body with 3 terminals to be fixed on PVC block |
| 116 | S&F regulator electronic step type for ceiling fans suitable for AC 230 volts 50 Hz 1200 / 1400mm sweep |
| 117 | MCB DB SPN sheet metal enclosure double door suitable for mounting MCB 240 volts with 200 Amps rated busbar 8 way |
| 118 | S&F MCB SP 240 volts 6-32 Amps |
| 119 | S&F isolator SPN 40 Amps 240 volts |
| 120 | Supply and fix in repairLED Fitting18 Watts LEDMODEL:LHEXBQP71NWO18 MAKE :Havells or Equivalent |
| 121 | Supply and fix in repairLED Fitting9 Watts LED including provision of connections cable pvc unsheathed stranded copper conductor and pvc square block of size 80mmX80mm . |
| 122 | S&F in repair LED Security Light fitting of 35 W, Die cast Aluminium extruded housing with reflector and enclosed with toughened glass IP 65for and Driver all as specified & Directed. |
| 123 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers all as specified and directed by Engr in charge. |
| 124 | M&L for earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6) mm thick burriedburried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level duly connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel all as shown in electrical plare No 3,connected to earthing test point all as specified or indicated including testing on completion including excavation and earth work in any strata,PCC Chamberwith cover,Charcoal and Salt as required & 15 mm Light Grade GI pipe from steel plate to DBin order to ensure satisfactory earth resistance result to the entire satisfaction of Engr-in-Charge. |
| 125 | Material and labour for replacement of unserviceable street light bracket made out of GI pipe 1.2 mtr long 40/25mm dia medium grade bent to shape as directed including MS clamps made out of 40mmX6mm flat iron for fixing bracket suitable for PCC/ street poles including nuts and bolts of required sizeall as directed incl taking down of old unserviceable bracket. |
| 126 | Supply and laying of pipe galvanised Medium class including with all fitting complete 40 mm dia all as specified and directed. |
| 127 | Supply and laying pipe galvanised Medium class including with all fitting complete 25 mm dia all as specified and directed. |
| 128 | Supply and layingpipe galvanised Medium class including with all fitting complete 20 mm dia all as specified and directed. |
| 129 | Supply and fixing gate valve stop screwed 20 mm all as specified and directed. |
| 130 | M&L for MS Work i:e includes material,cutting,welding,other process for shaping of material to get into required shape as per site requirment and fixing on site.Note: Earthwork will be measured and paid separately |
| 131 | S & F in repair submain wiring with cable insulated single core multistranded copper conductor cable 1100 volts 2x 4 sqmm drawn through & incl PVC casing caping / PVC conduit of suitable size alongwith 4.0 sqmm copper conductor cable for earth continuity. |
| 132 | Supply and fixing LED lights fitting 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 133 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed.Note :- Old ceiling fan should be deposited at MES store. |
