|
| 1 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing servicieable tiles to store and rubbish off the premises. |
| 2 | Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground floor) |
| 3 | M&L for PCC, 1:2:4 type B1 (using 20mm graded stone aggregate) as in roof/floor complete all as specified and directed. |
| 4 | S&F light coloured non - skid Ceramic tiles 7 to 8 mm thick area of eachtile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15mm thick screedin cement mortar 1:6 all as specified and as directed |
| 5 | -ditto- but in skirting over and including 10mm thick plasterin cement mortar 1:4 all as specified and as directed |
| 6 | S&F coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of eachtile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchover 15 mm thick screed bed in cement mortar 1:6. |
| 7 | S&F coloured Glazed ceramic tile in verticle surface 450x300x7-8mmthick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering in CM 1:4 |
| 8 | S&F chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors over 15 mm thick screed bed in cement mortar 1:6. |
| 9 | M&L for 75 mm thick, PCC 1:3:6 type C1 (using 20mm graded stone aggregate), finished even andand fair as in plinth protection incl joints filling complete all as specified. |
| 10 | M&L 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs,pillars, window cills, cooking platforms and like in cement mortar (1:4), 15mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with the granite complete all as specified and directed |
| 11 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar incl removal of debries out side MD land. |
| 12 | M&L for machine cut polished sadarahalli stone, uniform texture,in one piece in trade and risers, skiring of staircase inlcluding rounding the edge, cutting anti skid grooves 3 Nos in each trade, plastering/screed 15mm thick in CM 1:4 complete as specified and as directed. |
| 13 | M&L in repairs kitchen cabinets, cupboards etc of openable shutters, shelves partitins, drawers etc made up of 20mm solid core ply finished with 1mm veneer ply on both faces, each shutter having a pair of self closing hinges, stainless steel fancy handles, tower bolt and other fittings as directed, taking down old cabinets, S&F solid wood frame complete all as specified and as directed.Note - 1. Surface area of each member is measured flat for payment. 2. S&F of all necessary hardware deemed to be inclusive in quoted rates. |
| 14 | Taking down chowkat or frames with shutter (without taking off shutters from the frame)n. exc 1.5 sqmcompleteall as specified and directed. |
| 15 | Taking down chowkat or frames with shutter (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 Sqm etc complete all as specified and directed. |
| 16 | S&F solid PVCdoor frame of size 50mm x 47mm made out of 5mm plain colour PVCsheet, reinforced with MSsquare tube and fixing in position with hold fast,complete all as specified and directed. (Cost of hold fast included in the unit rate of this item.) |
| 17 | M &L factory made solid pannel PVC door shutter 30mm thick (style) consistingof frame made out of MS frameshall be covered with heat moulded plain colour PVC\"C\"channel having a PVC sheetstrip of 20 mm width stuck in side with solvent cement for stilesand plaincolour PVC sheetsfor top rail, lock rail and bottom rail on either side &as gap insertfor top rail and bottom rail panelling of plain colour PVC sheet to befitted in the MS frame wedded/sealed to thestyles and rails with suitable PVC sheet beading and joinedtogether with solvent cement supplying and fixing in the frame at side,including two Nos tower bolts/ Handles for each shutteras per specification and drawing upto complete all as specified and as directed. |
| 18 | M&L for 105x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed. |
| 19 | M&L for providing cement concrete type B-0, 1:3:6 ( 20 mm graded agg)as in coping, bed plates for angle iron, filling in frames etc complete all as specified and as directed. |
| 20 | S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 21 | S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hold fasts; wall ties;and similar small articles conforming to Fe-290 Gde-E-165 |
| 22 | S&F stainlees steel 304 grade polished 150mm door handles with stainless steel screws all as specified and as directed. |
| 23 | S&F stainlees steel 304 grade polished 150mm tower bolt with stainless steel screws all as specified and as directed. |
| 24 | S&F stainlees steel304 grade polished 250mm sliding door bolt with stainless steel screws all as specified and as directed. |
| 25 | S&F mild steel 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete (Helical door spring) including welding to steel chowkhats if requiredall as specified. |
| 26 | M&L for powder coated aluminium window sliding on three tracks, including aluminium shutter sections weighing not less than 0.37 kg/RM and frame bottom 0.70 Kg/RM, frame top and sides 0.60 Kg/RMincluding necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, stainless steel screws, anodised aluminium fittings such as locking arrangements, rollers etc complete all as specified and directed.Note - (a) Glass and mesh will be measured and paid seperately.All other hardware/fixtures will be inclusive of quoted rates.(b) Net opening will be measured for payment. |
| 27 | S&F aluminium anodised frame for doors, windows vetilators with one of more rebates incl joining cleat for fixing etc, with powder coating complete all as specified and directed. |
| 28 | S&F Powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified. |
| 29 | S&F galvanised mild steel wire cloth exc 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks or galvanised wire staple all as specified and directed |
| 30 | S&F stainless steel 100 mm butt hinges for doors complete all as specified. |
| 31 | S&F sheet glass 4.8mm thick ordinary quality, in squares n exc 0.5 sq. m each pane complete all as specified and directed. |
| 32 | -ditto- but 4.8mm thick sheet glass exc 0.5 sq. m each pane complete all as specified and directed. |
| 33 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.4 mm and fixed with stainless steel wire staples all as specified and as directed. |
| 34 | S&F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikers framed guard bars, barred iron doors, hollow section doors,ladders; framed balusters walk ways railings framework of watertanks and similar work conforming to Fe-290 Gde-165. |
| 35 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles |
| 36 | M&L precast cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in block masonry with solid blocks, exc 10 cm in width and setting in mortar complete 1:6 |
| 37 | Preparing the surface by Chipping of the loose/dead concrete, preparing the surface by removing the dust and laitance etc, Identify cracks and groove cut the cracks which is >5mm, clean the cracks and fill the same with precision grout or PU Sealant. Apply one coat of polymer based priming bond coat 1:4:7 (polymer, water and cement) to seal all the pores on the treated surface. Lay 45GSM glass fibre mesh (on horizontal surface only) or geo textile on the primed surface while it is in tacky condition. Apply two coats ofPU RoofKoat/Davko K10 on the Glass Fibre Mesh with a gap of 3-4hrs between the coating complete inlcuding taking down and refixing of water supply lines, cabes etc all as specified and as directed.Make - STP/Berger/Cico/Pedilite |
| 38 | -ditto- all as item No 37 above but on newly plastered and finished suface of roof. |
| 39 | Supply only integral water proofing compound complete all as specified and directed. |
| 40 | Taking down cement plaster on brick or stone walls or concrete ceiling etc, incl raking out joints, hacking for key scrubbing down with water, etc. complete all as specified and directed. |
| 41 | M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 incl finished even and smooth (without using extra cement) complete all as specified and directed. |
| 42 | M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 incl finished even and smooth (without using extra cement). |
| 43 | M&L for rendering 5mmthick in CM 1:3 on ceiling of concrete surfaces finished even and smooth without using extra cementincluding taking down plaster, including raking out joints, hacking for key, scrubbing down with water etc and removing rubbish of the premises complete all as specified and as directed. |
| 44 | M&L for preparing of newly plasteredsurfaces and applying three coats of white wash on ceilings complete complete all as specified and as directed. |
| 45 | M&L Complete removal of existing treatment of old surfaces of wallsand applying two coat of distemper oil emulsion incl 1mm thick wall putty and priming plastered and other surfaces with alkali resistant priming painton plastered surface complete all as specified. |
| 46 | M&L preparation of newly plastered surfaces of wall and applying two coats ofdistemper oil emulsion white or tint over primer with 1mm wall putty on plastered surface complete all as specified. |
| 47 | M&L preparation of newly plastered surfaces of wall and applying two coats ofcement base paint over a coat of primer surface |
| 48 | M&L for prepartion of old surfaces of walls andapplying a coat of cement based paint complete all as specified. |
| 49 | Supply and laying of 20 mm dia CPVC pipe SDR 11 & plain CPVC SDE 11 fitting on wall/ceiling or laying in tfloors Iincluding taking down old tubes 20mm dia, complete all as splecified. |
| 50 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in stone walls complete all as specified and as directed. |
| 51 | -ditto- but 25mm dia including taking down 25mm dia pipe all as specified and as directed. |
| 52 | S&F in CPVC brass treaded elbow 20 mm fixed withall as specified. |
| 53 | S&FCPVC brass treaded Tee20 mm all as specified. |
| 54 | S&F in repair PVC low level flushing cistern 10 ltr capacity, valveless, syphonic action type with inlet, ball valve float and handle incl brakcet and flush pipe 32 mm dia complete all as specified. |
| 55 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 56 | S & F in repair vitreous china white wash hand basin flat back size 550x400 mm incl brackets chain & plug and waste pipe waste coupling 32mm dia etc. |
| 57 | S & F PVC connection 15 mm dia with PTMT nuts of lenth 450 mm. |
| 58 | S&F 32 mm dia PVC waste pipe for WHB complete all as specified. |
| 59 | S&F Mirror cabinet of size 300mmx450mmmirror of selected qualityfixed in wall screws complete all as specified and directed.(Make: Prayag/Commander or its equivalent of other makes) |
| 60 | S&F in repairs angle valves male/female threaded 15 mm nominal bore, brass, fancy type, chromium plated, screwed down, high pressure with Capston head, screwed ends for iron/CPVC pipes or for unions complete all as specified and directed. |
| 61 | S&F in repair 15 mm bore Fancy type Bib taps, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. |
| 62 | S&F in repair 15 mm bore Fancy type Bib taps adjustable body, suitable for kitchen sink, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. |
| 63 | S&F in repair 15 mm bore pillar taps, cast copper alloy, fancy type with capstan heads, chromium plated screwed down high pressure with or without lattered \"Hot\" or \"Cold\" with long screwed for iron pipe and fixed. |
| 64 | S&F in repair Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified |
| 65 | S&F in repair brass chromium plated tubular towel rail 20 mm dia, D type 60 cm long between flanges |
| 66 | S&F shelf of PTMT fixed with and incl Chromium plated brass screws and wooden/plastic cleats (Min wt 300 gms) |
| 67 | S&F chromium plated grating 100/75 mm dia circular with centre hole/ without hole of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified. |
| 68 | S&F 1000 Ltr rotational moulded poly-ethylene water tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-Iincluding dismantling of tanks all as specified. |
| 69 | S&F 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed, (Min wt 210 gms) |
| 70 | S&F CPVC tank adaptor 20mm dia. |
| 71 | S&F in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast ironbrackets,connectingunionetc, overall size 495mm x 420mm with bowl size 410mm x330mm x 160mmincluding fixing cantilever brackets and connecting union to waste pipe complete all as specified and as directed. |
| 72 | S&F in repair PVC (SWR) pipes75 mm size in bore single socketed , in any length with rubber ring joints, fixed to walls including dismantling and breaking of pipe and fittings complete all as specified and as directed. |
| 73 | S&F in repair PVC (SWR) pipes110 mm size in bore single socketed , in any length with rubber ring joints, fixed to walls including dismantling and breaking of pipe and fittings complete all as specified and as directed. |
| 74 | S&F assembled ready to use stainless steel grade 304, kitchen plate rack inlcuding top/middle shelves of 1.0mm thick sheet, square hollow supports,including bottom hooks, spoon holes, front and back open, size 915x915mm as approved and specified. |
| 75 | S&F PVC (SWR) bends 75mm any radius |
| 76 | S&F PVC (SWR) bends 110mm any radius |
| 77 | S&F in repairs Stainless steel polished curtain rod medium weight 25mm dia with and including support wall bracket of and end knobs of polished stainless steel all as specified. |
| 78 | S&F Stainless steel polished wall brackets for holding curtain rod medium weight all as specified. |
| 79 | S&F in repairs Stainless steel polished end knobs spherical in shape suitable for 25mm rodall as specified. |
| 80 | Taking down copper / aluminium point wiring ( light, fan, socket or power) complete, including fitting & fixtures such as switches, ceiling roses, pendants, regulators, sockets , light fitting etc. removing materials to store for keeping in safe custady or for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. |
| 81 | Taking down unserviceable main switch/DB, Teak wood boards etc |
| 82 | M & L point wiring complete with 1.5 Sqmm Single core PVC insulated, unsheathed cable 1100 volts grade multistranded copper conductors drawn through and including casing caping required at siteand its accessories fixed on surface of walls/ceilings etc including 1.6mm thick pressed steel terminal boxes concealed in walls covered with plastic laminated sheet top cover 3mm thick fixed with cadmium plated or brass screws for housing switches, socket outlets, fan regulators etc including provision of 1.5 Sqmm single core PVC insulated unsheathed copper cable with multistranded conductors as earth continuity wire connected to common earth dolly all as specified and as directed for :- |
| 83 | One light point controlled by one switch complete all as specified and as directed by Engr-In-Charge. |
| 84 | One Bell point controlled by one switch complete all as specified and as directed by Engr-In-Charge. |
| 85 | One fan point controlled by one switch complete all as specified and as directed by Engr-In-Charge. |
| 86 | One 3 pin 5 Amps socket outlet point on independent board complete all as specified and as directed by Engr-In-Charge. |
| 87 | One 3 pin 5 Amps socket point on the same board with other switches complete all as specified and as directed by Engr-In-Charge. |
| 88 | S&F call bell, musical type, 230 volts AC Single pole complete all as specified and as directed by Engr-In-Charge. |
| 89 | All as per item No 82 here in before but wiring with 2.5 sqmm unsheathed single core PVC insulated multistranded copper conductor for 3 pin 15 Amps socket outlet complete all as specified and as directed by Engr-In-Charge. |
| 90 | M & L switch piano, flush type single pole, one way 5 Amps complete all as specified and as directed by Engr-In-Charge. |
| 91 | M&L switch socket outlet 2in1, 3pin,5A complete all as specified and as directed by Engr-In-Charge. |
| 92 | M&L switch socket outlet 2in1, 3pin 15A complete all as specified and as directed by Engr-In-Charge. |
| 93 | M&L ceiling rose surface bakelite 65x50 mm two to three terminals complete all as specified and as directed by Engr-In-Charge.. |
| 94 | S&F steped type electronic fan regulator flush type, 230 volt, AC complete all as specified and as directed by Engr-In-Charge. |
| 95 | S&F MCB Single pole, 240 volts 6 to 32 Amps complete all as specified and as directed by Engr-In-Charge. |
| 96 | S&F MCB Single pole and neutral 06 to 32 Amps, 240 Volts complete all as specified and as directed by Engr-In-Charge. |
| 97 | S&F MCB triple pole and neutral 32 to 63 Amps, 415 Volts complete all as specified and as directed by Engr-In-Charge. |
| 98 | M & L for lamp holder , PVC/ Polycarbonate type with back plate sutaible for LED 9W lamp fittings Complete all as specified and as directed by Engr-In-Charge. |
| 99 | Supply and fixing of LED lamp 9W including driver holder Complete all as specified and as directed by Engr-In-Charge. |
| 100 | S&F sheet metal enclosure (for DB\"s when MCBs to be used), Single pole and neutral double door, 8 way, 240 Volts complete all as specified and as directed by Engr-In-Charge. |
| 101 | S & F in replacement VTPN DB - Dobule Door made out of CRCA mild steel sheet flushed in wall, TPN 4 way with 200 Amp rated bus bar, 415 volt with PVC MCB blanking plate, stove enamelled for incorporated of MCBs, insulators and MCCB of capacity upto 125 Amps TP/FPetc, complete all as specified and as directed by engineer in charge |
| 102 | M&L submain wiring with 2 runs of single core 6 sqmm size PVC insulated unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC conduit and its accessoriesincluding provision of one run of 6 sqmm PVC insulated single core unsheathed copper multistranded conductor cable as earth continuity wire complete all as specified and directed including taking down of existing submain wiring casing and caping/conduit type with 2 runs of 6 sqmm aluminium conductor complete all as specified and as directed by Engr-In-Charge.. Note :-2 runs of cable, one run of earth wire (copper cable) & one run of PVC conduit shall be measured as one running metre. |
| 103 | Supply andfixing surface mounted Mini Mirror light LED batten 2feet with extruded aluminium housing and robust construction 10 W system lumenwith all accessories if required flexible copper 2 core wire from fitting to ceiling roseall as specified and directed by Engr-in-Charge. |
| 104 | Supply andfixing surface & wall mounted LED batten 4feet with extruded aluminium housing and robust construction 20 W system lumenincluding flexible copper 2 core wire from tube light fitting to ceiling rose required lengthwith all accessories all as specified and directed by Engr-in-Charge. |
| 105 | S & F LED flood light 30W made up ofpressure die cast aluminium housing wth toughened glass and LEDs as a light source prewired with electronic driver suitable for 30 watts light fitting with IP 65 protection with Surge protection device for protection of LED driver, lumen efficacy of light fitting shall be not less than 100 lm/W. withnecessary mounting arrangements colour as per deside at site including taking down old unserviceable light fitting.complete all as specified and directed by Engr-in-charge. |
| 106 | S&F in replacement wall mounting fancy light fitting in plastic body with lamp holder B22 base and diffiuser sutaible for and including 9w LED Lamp of colour as decided with mounting provision complete all as secified as directed by Engr-in-Charge. |
| 107 | Taking down unserviceable ceiling fan, wall mounted fan, cabin fan, exhaust fans etc of any type and size from position, disconnecting electric supply, repair/replacement of unserviceable items, including cleaning oiling/greasing,tightening of nut bolt and refixing matching with existing. complete all as specified and directed by Engr-In-Charge. |
| 108 | Supply only following items to be fixed under item no -102 complete all as specified and directed by Engr-In-Charge. Ball/Roller bearing of size and shape matching with existing suitable for ceiling fans |
| 109 | Supply only following items to be fixed under item no -102 complete all as specified and directed by Engr-In-Charge. Ball/Roller bearing of size and shape matching with existing suitable for exhaust fans |
| 110 | Gun metal bush of size and shape matching with existing suitable for ceiling fans |
| 111 | Gun metal bush of size and shape matching with existing suitable for Exhaust fans |
| 112 | Motor stator for ceiling fans wounded with copper wire of size matching with existing with insulation with casing complete. |
| 113 | Motor stator for exhaust fans upto 250 mm sweep wounded with copper wire of size matching with existing with insulation and casing matching with existing complete. |
| 114 | Motor rotor prewiredfor ceiling fans of size and type matching with existing |
| 115 | Motor rotor prewired for Exhaust fans/wall mounted fans of size and type matching with existing |
| 116 | Fan blades for ceiling fan of any type and size matching with existing |
| 117 | Fan blade for exhaust fan metal body any type and size with mounting provisions matching with existing. |
| 118 | Plastic cup with screw for ceiling fans |
| 119 | Rubber bush with MS bolts, nuts & washers with \"U\" clamps for ceiling fans complete all as specified and as directed. |
| 120 | S&F in replacement capacitor 2.5 Mfd suitable for ceiling / exhaust /wall mounting fans complete all as specified and as directed. |
| 121 | S&F in replacement down rod of 30/45 cm with nut, bolts and safety pin for ceiling fans complete all as specified and as directed. |
| 122 | M&L for Preparation of surface & painting the ceiling fans with blades complete after cleaning & applying one coat of stove enamelled white paint by spray painting, writing No complete all as specified & as directed by Engr -in-Charge. |
| 123 | M&L for Preparation of surface & painting the Exaust fans with blades complete after cleaning & applying one coat of stove enamelled white paint by spray painting, writing No complete all as specified & as directed by Engr -in-Charge. |
| 124 | Taking down, dismantling of geysers of any type/capacity from site for repair and Inspection, cleaning, descaling, brazing inner tank, internal wiring including replacement of unserviceable items as reqd, reassembling & reinstallation after necessary repair incuding testing after repair complete all as specified & directed. Note :(a) Replacement of major unserviceable items shall be measured & paid separatelyunder respective item of work..(b)Cost of replacement for minor items like washers, gaskets, nuts, bolts etc and items not mentioned below is deemed to be include in quoted rates. |
| 125 | Supply only following items to be fixed under item no -103 complete all as specified and directed by Engr-In-Charge. Inner tank for geyser of capacity 25 ltrs of shape matching with existing. |
| 126 | Siphon Assembly suitable for geyser of capacity 25 ltrs of shape matching with existing. |
| 127 | Heating element rated 1.5/2.0 KW with mounting provisions round/tikona as reqd of shapematching with existing |
| 128 | Thermostat with auto cutoff provision switch capillary/screw type, with range 0-80 deg celcius of shape and size matching with existing suitable for geyser of capacity 25/50 Ltrs. |
| 129 | Indicator lamp red and green with coloured diffuser for geysers matching with existing. |
| 130 | Safety valve/high pressure valve matching with existing for geysers |
| 131 | NRV for geysers matching with existing. |
| 132 | Base fixing cover matching with existing. |
| 133 | Cover outer for geyser of capacity 25/50 ltrs of shape and size matching with existing. |
| 134 | Supply , lay, test & commisoningLT UG cable XLPE insulated sheathed and armoured, with aluminium stranded conductor,LT 1100 Volts grade of SSRze 35 sqmm 4 core complete all as specified and as directed by Engr-In-Charge. |
| 135 | Excavation in trenches in soft /loosesoil notexceeding 1.5 M wide and not exceeding 1.5 M in depth for laying of UG cables etc and getting out complete all as specified and as directed by Engr-In-Charge. |
| 136 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cms in any type of soil complete all as specified and as directed by Engr-In-Charge. |
| 137 | Removing excavated soil to a distance not exceeding 50 mtrs and depositing where directed at a level not exceeding1.5 M above the starting pointall as directed. |
| 138 | M&L for sand cushioning in trenches for bricks of u/g cable with coarse sand laid dry in trenches with uniform thickness complete all as specified and as directed by Engr-In-Charge. |
| 139 | Supply and lay burnt bricks of sub class \"B\" laid dry acrossin trenches for cable protection all as specified and directed Complete all as specified and as directed by Engr - In - Charge. |
| 140 | Supply and laying 40 mm GI pipe fitting tubes medium grade galvanished with all fittings complete laid in trenches including taking down the old unserviceable GI pipe from trenches Complete all as specified and as directed by Engr-In-Charge. |
| 141 | Supply and laying 25 mm GI pipe fitting tubes medium grade galvanished with all fittings complete laid in trenches including taking down the old unserviceable GI pipe from trenches Complete all as specified and as directed by Engr-In-Charge. |
| 142 | Supply and laying 20 mm GI pipe fitting tubes medium grade galvanished with all fittings complete laid in trenches including taking down the old unserviceable GI pipe from trenches Complete all as specified and as directed by Engr-In-Charge. |
| 143 | S & F of float valvesof size 20 mm and as reqired at site as complete brass fitting with rod and plastic ball Complete all as specified and as directed by Engr-in-in Charge. |
| 144 | S & F gun metal gate valvewith inner wheel head, screwed both ends in iron pipe and fixed of Size 20 mmComplete all as specifed and as directed by Engr-In-Charge. |
| 145 | S&F in replacement meter box, Size not less than 750mm x 750MM x 200MM , fabricated out of sheet steel, wall mounting meter box suitable for mounting 8 nos energy meters of size matching with existing, concealed type, painted with stove enamelled paint over a coat of red oxide primer on 2.0 mm thick sheet steel, weather proof with double stud hinged door front open with internal locking arrengement and externally locking arrengement with aldrop bolt and meter mounting sheet sutaible size shouldbe fixed inside box including dismantling old meters and cutouts from old box and refixing energy meter with complete connection in new meter box complete all as specifed and as directed by Engr-In-Charge. |
| 146 | M & Learthing complete with GI earth plate Electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth plate not less than2.25 Metre deep below ground level)with top edge of the plate not less than1.5 metrebelownormal ground levelconnected to galvanished earth wire4.0 mmdia bymeans ofbolts, nuts check and washers ofG I or steel all as shown in electrical plate No. 5 of SSR Pt -Iconnected to earthingtest point all as specified or indicated including GI pipe 15 mm dia light grade for earth wire protection, 20 mm dia GI pipe medium grade for watering purpose,necessary excavation,earth work in any typeof soil, PCC chamberand RCC cover slab, connecting lead wire from test point to DB complete all as specified and as directed by Engr-In-Charge. |
