|
| 1 | Dismantling offloor hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Eng in Charge |
| 2 | M/L for glazed ceramic coloured tiles in vertical surfaces 450x300x7mm thick setand jointed in neat cement slurry pointed in white or colour cement to match the colour,with 15 mm thick cement screed bed(1:4)complete all as specified and directed by Eng in Charge |
| 3 | M/L for non skid ceramic tiles light shade tiles 7-8 mm thick (square/rectangular) polished, area of each tile exe 0.06sqm not exc 0.11 Sqmin floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement screed bed in CM (1:6) complete all as specified and directed by Eng in Charge |
| 4 | M/L for vitrified ceramic coloured tiles 10 mm thick light shade (square/rectangular)area of each tile exceeding 0.18sqm but n.exc 0.38 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement screed bed in CM (1:6) complete all as specified and directed by Engr-in-Charge |
| 5 | M&L for granite 20mm thick (of any type) work (table rubbed and polished)in steps, jambs, pillars, window cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite complete all as specified and directed by Eng-In-Charge. |
| 6 | M&L for machine cut kota stone slab flooring for Landing and flooring 20 mm thick laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including cutting and polishing bedded on 15mm thick bedding layer in CM 1:6 incl making hole for gas pipe as specified and directed by Eng-in-Charge. |
| 7 | M&L for machine cut kota stone as in risers, steps, skirting, dado, 20-25 thick laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including cutting and polishing bedded on 15mm thick bedding layer in CM 1:6 incl making hole for gas pipe as specified and directed by Eng-in-Charge. |
| 8 | Demolition of brick / block masonry built in CM including all quoins, arches, pillars etc and clearing off the premises. |
| 9 | M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 Complete all as directed. |
| 10 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed |
| 11 | Use and waste of formwork to chajjas and similar items including edges rough finished complete all as specified and directed. |
| 12 | M&L for TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending hooking etc & binding with mild steel binding steel wire (annealed) not less than 0.9mm dia all as specified and directed by Eng in Charge |
| 13 | M&L RCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in chajjas etc. complete all as specified and directed by Engineer-in-charge. |
| 14 | Taking down cement plaster on brick work or concrete surfaces incl racking out joints all as specified. |
| 15 | M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified. |
| 16 | M&L for 15mm thick Rendering in CM 1:4 on brick work or concrete surfaces with water proofing compound finished even and smooth etc complete all as specified and directed. Note: WPC shall be paid separately. |
| 17 | M&L for 5mm thick rendering in CM 1:3 on brick work or concrete surfaces finished even and smooth w/o using extra cement in Ceiling etc complete all as specified and directed. |
| 18 | M&L for preparation of new plastered surfaces of ceiling and applying two coats of whitewash on ceiling over a coat of birla white putty complete all as specified and directed by Engr-in-Charge |
| 19 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distermper over a coat birla white putty complete all as specified and directed by Engr-in-Charge |
| 20 | M & L applying two coats of exterior emlsion paint on plastered or unplastered wall surface over a coat of primer including preparation ofsurfaces, complete all as specified and as directed. |
| 21 | Demolition of cement concrete of any description and in any position not otherwise specially provided for complete all as specified and directed. |
| 22 | M&L 75mm thick PCC 1:3:6 type C2 as in plinth protection finishing the surface even and smooth with out using extra cement complete all as specified and directed. |
| 23 | M&L for providing GI pipe heavy class of dia 40mm all as specified and directed by Eng-In-Charge |
| 24 | M&L PCC (1:5:10) type E2 using 40mm graded aggregateas in sub basecomplete all as specified and directed by Engineer-in-charge. |
| 25 | M&L PCC type B-0 (1:2:4) (12.5mm stone graded aggregate), 40 mm thick as for receiving top finishing layer of ceramic tilesfinished even and smooth etc complete all as specified and directed. |
| 26 | Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area not exc 1.50 sqm each complete all as specified and directed. |
| 27 | Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area exc 1.50 sqm but n. exc. 4.00 sqm each complete all as specified and directed. |
| 28 | S/F solid PVC door frame of size 50x47mm made out of5mm plain colour PVC sheet reinforced with MS square tube in opening complete all as specified and directed. |
| 29 | S &F Factory made solid panel PVC door shutter30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm widthstuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheetbeading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing all as specifed and directed by Eng-In-Charge |
| 30 | S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 125 x 60mm filling hollow frame complete all as specified and directed. |
| 31 | S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 105 x 60mm filling hollow frame complete all as specified and directed. |
| 32 | M&LPCC 1:3:6 type C2 as in filling of chowkhats complete all as specified and directed by Engineer-in-charge. |
| 33 | S&F factory made 2nd class, hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to received glass, gauge, etc ( without sash bars) edges of framing plain, chambered or rounded, fitted with cut and mitred beads for securing glass , etc but difided into squares with plain chamfered or rounded mirted and rebated sash bars any numbers sizes of members of shutters as specified and directed by Engineer-in -Charge. |
| 34 | S &F factory made 2nd class hard wood Plain, framed, panelled shutters 35 mm thick(any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkatscomplete all as specified and directed by Engineer-in-charge. |
| 35 | Dismantling boarding, cupborad any description, fixed in any position complete all as specified and directed by Eng-In-charge |
| 36 | S&F PVC cupboard frame of size 75mm x 40mm with wall thickness of 5mm made out of extruded 5mm thick Plain/Printed/Prelam PVC sheet reinforced with 15mm x 15mm M.S. square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners and jointed with 2 nos. of 150mm long brackets of 10mm x 10mm M S square tubes. The door frame shall be fixed to the wall using 65/100mm long MS screws through the frame by using PVC fasteners complete all as specified and directed |
| 37 | S&F factory made PVC cupboard shutter flush type of 25mm thickness consisting of panel of hollow PVC profile of 12mm x12mm inserted all around the hollow profile section and insert one 10mm x 10mm MS tube in the centre of this section and lipped with 10mm thick(5mm x 2) and 12mm wide on stiles and rails using solvent cement the inner panel shall be laminated with 5 mm thick termite proof waterprrof and fire retardent printed PVC sheet using solvent cement on both sides of panel complete all as specified and directed. |
| 38 | S&F Stainless steel round closet rod of 40mm dia,2mm thick wardrobe hanger rod, rod for hanging clothes in wardrobe with end supports including all screwing fittings complete all as specified and directed by Engineer-in-charge. |
| 39 | S&F alumunium hinges for PVC door shutter, size of hinges in 100mm |
| 40 | S&F Aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt in 200mm complete all as specified and directed by Eng-In-Charge |
| 41 | S&F extruded aluminium alloys handles frabicated type anodized of size 150mm long complete all as specified and directed by Eng-In-Charge |
| 42 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt in 250mm complete all as specified and directed. |
| 43 | M&L for preparation of new wooden surface exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 44 | M&L for preparation of new steel surfaces of any description over 10cm girth or width not otherwise described and applying two coat of synthetic enamel paint over red oxide primer all as specified and directed by Engineer-in-Charge. |
| 45 | S & F steel window 1.25mm thick Box type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises glazed Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Handles of Z Sec 20mm x 100mm long (b) stopper – 01 No per leaf (c) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 Noper leaf (d)Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (e) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings. Note: Glass and painting shall be measured and paid separately under appropriate item (ii) Irrespective of whatever shown on drgs, MS gills shall be of 12mm dia MS square bar and paid separately. complete all as specified and directed. |
| 46 | S&F steel window 1.25mm thick Box type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises gauged Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 Noper leaf (e)Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings. Note: Wire mesh and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed. |
| 47 | Supply and fix steel ventilators fixed type with glazing bars etc complete all as specified and directed by EIC. |
| 48 | S&F 3.00 mm thick Plain sheet glass, one side sheet glass is groundor obscured or frosted in squares n exc 0.5 sqm each pane and glazing with metal beads all as specified all as specified and directed by Eng-in-Charge |
| 49 | S&F 4.00mm thick figured glass, pinhead type in squares n exc 0.5 sqm each pane and glazing with oil puttyall as specified. |
| 50 | S/F mild steel wire cloth 0.56mm nominal dia of wire and avarage width of aperture 1.00mm and fixed with tinned tacks/screwswith bolts incl leaping wooden complete all as specified and directed. |
| 51 | M/L for framed work such as grills gratings etc with ends of bars shouldered and or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings framed work of water tanks and similar work complete all as specified and directed. |
| 52 | S/F 300mm MS ordinary rat rail rod pattern helical springs including roller and roller plate complete all as speicified complete all as specified and directed. |
| 53 | Taking down GI tubing & connection 15mm dia laid in floor / trenches or fixed to walls complete all as directed by Engineer-in-Charge. |
| 54 | S&F High density polyethylene pipes(HDPE) ,15mm dia, of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Eng-In-Charge. |
| 55 | Taking down GI tubing & connection 20mm dia laid in floor / trenches or fixed to walls complete all as directed by Engineer-in-Charge. |
| 56 | S&F High density polyethylene pipes(HDPE) ,20mm dia, of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Eng-In-Charge. |
| 57 | S&F in repairs 15 mm bore CP bib taps fancy type cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule and fixed complete. |
| 58 | S&F in repairs 15mm dia stop/angle valve, CP cast copper alloy with crutch or butterfly handle. Screwed down high pressure, screwed both ends for iron pipe and fixed complete all as directed |
| 59 | M&L for providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws etc. complete all as specified and directed by Eng-In-Charge |
| 60 | M&L for providing and fixing 200 mm long stainless steel fancy handle of approved make fixed with SS screws etc. complete all as specified and directed by Eng-In-Charge |
| 61 | M&L for providing and fixing stainless steel soft closing spring hinges atany degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete all as specified and directed by Eng-In-Charge |
| 62 | M&L for providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved makelong with screws etc. complete all as specified and directed by Eng-In-Charge |
| 63 | M&L for providing Heavy Duty Modular Kitchen Cabinet Door Lift Support Hydraulic Mechanism/Accessories complete all as specified and directed by Eng-In-Charge |
| 64 | M&L for providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings(including . The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-in- charge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately) complete all as specified and directed by Eng-In-Charge |
| 65 | M&L for providing and fixing 2mm thick 16 to 19mm wide PVC edge binding tape of approved quality for cupboard/wardrobe shutters including necessary synthetic resin hot pressed to edges on binding machine etc. complete all as specified and directed by Eng-In-Charge |
| 66 | Supply only PU expanding foam spary single component polyurethne foam, fast curing, HFC- free for filling up the voids as in cupboard shelves, framecomplete all as specified and directed by Eng-In-charge |
| 67 | M&L for providing and fixing ready made 304 grade stainless steelGTPT (glass tray, plate tray) and drip tray The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-in- charge. (For payment purpose only weight of GTPT shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately) complete all as specified and directed by Eng-In-Charge |
| 68 | M&L for 75mm round Stainless steel, glossy finish legs for cupboards all as specified and directed by Eng-In-Charge |
| 69 | Supply and fix in repairs vitreous china squatting pan Orissa pattern wash down water closet of size 580x440 mm, white, with integral foot rests complete fixed in repairs with P or S trap, PVC flushing cistern low levelofMake 10 ltrs capacity including brackets for flush tank, PVC flush pipe and all necessary fittings etc complete complete all as specified and directed. |
| 70 | S&F 600x450 mm size and 5.5mm thick looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel alround,mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screws complete all as specified and directed. |
| 71 | S&F 20mm dia aluminium chromium plated tubular towel rails,D type,60cm long between flanges,complete all as specified. |
| 72 | S&F in repairs PVC(SWR) floor trap with grating and diameter of outlet 75mm including jointing to waste pipe fixed with solvent cement complete all as specified and directed. |
| 73 | S&F in repairs fancy type chromium plated stop valves with long shank and cup (concealed type) cast copper alloy screweddown high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed for bore fof size 15mm complete all as specified and directed. |
| 74 | Supply and fix in repairsfor vitreous china ware wash basin white, flat back size 550 X 400mm including 15mm dia pillar tap chromium plated, CP waste coupling, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let connections complete complete all as specified and directed. |
| 75 | S&F in repairs shower rose 100mm with cp arm of chromium plated any colour or fixing with 15mm pipe (minimum weight 40gm) complete all as specified and directed. |
| 76 | S&F kitchen sink with drain board made of stainless steel 1mm thick sheet with plugs, washers and wastes including bedding in cement mortar including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 77 | S&F utensil rack stainless steel of size 750x600x250 mm fixed on walls with screws complete all as specified and directed by Eng-In-Charge |
| 78 | S&F soap dish chromium plated heavy duty complete all as specified and directed by Eng-In-Charge |
| 79 | S&F in repair 25mm MS curtain rail powder coated with fixing brackets, stops, roller etc complete all as specified and directed by Eng-In-Charge |
| 80 | Cutting chases pinning in brick/stone/blocks masonary in making good to facings where required and pointing in CM (1:3) to ends or eges of steps, cills, sun shades, shelves, lintel etc and cutting chases for concealed water tubing oretc and making good complete all as specified and directed. |
| 81 | Taking downrainwater pipes including all fittings as specified and directed. |
| 82 | Dismantling of cast iron pipe any diameter jointed with cement mortar or lead incl all fittings from wall or floors as specified and directed. |
| 83 | S&F 75 mm PVC (SWR) pipes in repair single socketed in any length with rubber ring joints fixed to walls complete all as directed by Engineer-in-Charge. |
| 84 | S&F 75 mm PVC (SWR) pipes in repair single socketed in any length laid in floor complete all as directed by Engineer-in-Charge. |
| 85 | S&F 75 mm PVC (SWR) bendcomplete all as directed by Engineer-in-Charge. |
| 86 | S&F 75 PVC (SWR) junction single,(single T)equal or unequal complete all as directed by Engineer-in-Charge. |
| 87 | S&F 110 mm PVC (SWR) pipes in repair single socketed in any length with rubber ring joints fixed to walls complete all as directed by Engineer-in-Charge. |
| 88 | S&F 110 mm PVC (SWR) bend with complete all as directed by Engineer-in-Charge. |
| 89 | S&F 110 PVC (SWR) junction single,(single T) equal or unequal complete all as directed by Engineer-in-Charge. |
| 90 | S&F 75 mm PVC(SWR) vent cowl. |
| 91 | Dismantiling water tank PVC 500 Ltrs and removing from site |
| 92 | S&F rotational moulded polythelene water storage tanks cylindircal water tankfor hoisted and fixed in postion of 500 ltrs capcity incl fittings and as directed by Engr-in-Charge |
| 93 | S&F gunmetal globe and gate valve with iron welded hand secrewed both and for iron pipe 20mm fixed in repairs |
| 94 | S&F gunmetal globe and gate valve with iron welded hand secrewed both and for iron pipe 15mm fixed in repairs |
| 95 | S& F in repairs Ball valves 20mm high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm - 690 gms) |
| 96 | Dismantling of brick tiles or terracing tiles laid bedded and pointed in cement mortar in single layer on roofs as directed by Engr-in-Charge |
| 97 | Demolition of mud in roof any thickness including plastering & leeping removed as directed by Engr-in-Charge |
| 98 | M&L for rendering 10mm thick cement mortar 1:3 on concrete surface even and smooth with waterproofing compound as directed by Engr-in-Charge |
| 99 | Supply only integral water proofing compound. |
| 100 | Preparation of newly plastered surface making surface completely dry and applying a coat of bitumen primer @ 0.40 ltr/sqm and after drying of primer apply APP modified water proofing membrane with non woven polyster reinforcement 3mm thick superior multipolymericweighing not less than 3kg/sqm with properties of high penetration and centre core consisting of 90 micron high molecular high density polyethylene (MHHDPE) film consisting of five layers with a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm under and over the APP membrane laid with torching application to the surface complete and sealing the side as well as end laps as in sunken and roof slab (overlaps should not be less than 10 cm) complete all as specified and directed. |
| 101 | M&Lfor 40mm thick brick tiles laid on 15mm screed bed in cement mortar 1:3 with jointing and pointing in cement mortar (1:3) mixed with 5% crude oil by weight of cement all as directed. |
| 102 | All as per item no 101 above but except brick tiles complete all as specified and directed by Engineer-in-charge. |
| 103 | Material and labourfor 75 mm thick Cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) as in PCC padding over roof slabcomplete all complete all as specified and as directed by the Engineer-in-Charge. |
| 104 | M&L cement concrete Type B0 1:2:4 (12.5mm graded aggregate) in roof kerbs, rounded or chamfered edges complete all as specified and directed by Engineer-in-charge. |
| 105 | Earthwork in excavation by mechanical means (hydraulic excavator) means over areas ( exceeding 30cm in depth, 1.5m in width as well as 10sqm on plan) including getting out and didposal of excavtaed earth lead upto 1.5m, as directed by Engineer-in-Charge |
| 106 | Returning, filling in, spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each layer complete all as specified. |
| 107 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point |
| 108 | M & L for Cutting into existing manhole for connecting new drains and making good for 200 mm bore pipe and rendering, cutting out existing benching and forming branch (1/2 or 3/4 section) channel in plain cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregates, surface finished even and smooth and reforming benching as reqd. |
| 109 | M&L RCC 450mm bore class NP2 laid and jointed complete with collars laid in trenches and tested complete all as specified and directed |
| 110 | Material and labour for providing precastcement concrete in windowor door cills , lintels, ditto but in landings, cover slabs ( for manholes etc) chullah hoods, chajjas, water troughsand similar articles set in CM 1:6 using type B1 (1:2:4) (20mm graded stone aggregate) all as specified and directed by Engineer-in-Charge. |
| 111 | M&L for concrete bed to drain pipes450mm bore in cement concrete (1:3:6) type C-2 (using 20mm graded stone aggregate) including packing under and completely surrounding pipes with concrete after they are laid and testedcomplete all as specified and directed |
| 112 | Taking down aluminium point wiring for light, fan, bell socket, power socket etc complete including fittings and fixtures removing from site and making good disturbed surfaces of walls, floors, etc complete all as directed by Engineer-in-Charge |
| 113 | Material and labour for point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC (FR) insulated cable in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 1.5 Sqmm insulated un-sheathed PVC insulated copper conductor common earth and connecting to earth dolly for :- |
| 114 | One light point controlled by one, one way switch |
| 115 | One fan point controlled by one, one way switch |
| 116 | One socket outlet 3 Pin, 5 Amp on independent board |
| 117 | One socket outlet 3 Pin, 5 Amp on same board. |
| 118 | One bell point controlled by one bell push |
| 119 | One light point controlled by one, two way switch |
| 120 | M&L for point wiring with 4.00 Sq mm single core multi-stranded copper conductor PVC (FR) insulated, unsheathed cable 1100 volt grade in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 1.50 Sq mm single core, multi-stranded copper conductor, PVC insulated, unsheathed cable for common earth and connecting for earth dolly for 5 pin, 15 Amp socket outlet on Independent board. |
| 121 | S&Fswitch piano flush type single pole one way 5 Amp (ISI Marked) |
| 122 | S&F switch piano flush type single pole one way 15 Amp (ISI Marked) |
| 123 | S&F socket out let 2 in 1, 3 pin 5 Ampflush type (ISI Marked) |
| 124 | S&F socket out let 2 in 1, 3 pin 15 Amp flush type (ISI Marked ) |
| 125 | S&F switch piano flush type single pole two way 5 Amp. |
| 126 | S&F Bell push flush type single pole one way5 Amp |
| 127 | M&L for ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate,isolated body (ISI Marked) |
| 128 | Taking down old unserviceable flourescent tube light fitting 36/40 watt fluorescent tube light fittings direct to walls or roof as ordered and disconnecting electrically with the electrical system and all materials required for the same. The rates also include making good the same to match with the existing surface. |
| 129 | Supply, installation, testing and commissioning Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Make: Crompton/ Bajaj/ Philips |
| 130 | Taking down old unserviceable lamp holder and S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings.including LED lamp 09 Watt.. |
| 131 | Taking down old unserviceable bulkhead fitting & supply & fix LED light fitting 1x9 watt/1x10 watt bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge, |
| 132 | Supply and fix LED Bldg security light fitting 35 W housing made out of die cast aluminum alloy with toughed glass, IP 65/66 protection having clamp for mounting on wall working on 240 V AC 50 Hz, 20 watts including fixed on wall with 02 Nos MS clamps and bracket made of 40 mm dia light grade GI pipe bend to shape. complete all as specified and as directed. Make : Wipro/Havells/Bajaj. |
| 133 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) and connecting up and including provision of twisted three core PVC insulated flexible cord of 0.75 Sqmm copper conductor of required length from ceiling rose/connector to fan complete all as specified and directed. |
| 134 | S&F in replacement Exhaustfans of 230 Volt 300 mm sweep ventilator DB bouble ball bearing heavy duty motor, metal blade with protection steel bird guard and roubst complete including M&L for providing/cutting the round hole of required size in wall finishing the same supply and grounting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 23/.0076 copper cable rubber insulated from ceiling rose to exhaust fan motor and writing MES No. with black synthetic enamel paint 2.0 cm high complete all as specirfied and directed( Make-BAJAJ, HAVELLS, USHA) |
| 135 | Taking down old unsv DB and supply and fixing factory made sheet metal enclosure double door distribution board class IP-43 with 200 Amp rated copper bus bar 240 volts 8 way single pole and neutral link complete all as directed by Engineer-in-Charge. |
| 136 | Taking down unserviceable MCB’s and supply & fix following type/rating MCB’s including necessary connection as under:- |
| 137 | S & F of MCB, 10 to 32 Amp, SP, 240 Volt . |
| 138 | S&F of MCB,25 to 32 to Amp, SPN, 240 Volt. |
| 139 | M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick surrounded with charcoal and salt, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as directed. |
| 140 | Supply, install, testing and commissioning of LT panel size 800 mm x 600 mm x 150 mmenclosures cubical weather and vermin proof totally enclosed made out of 1.6 mm thick CRCA sheet machine pressed of suitable size to operate on 3 phase 4 wire system 415 Volts, 50HZ double door withfront openable and PVC acrulic glass cover suitable size for checking of meter reading without opening door with locking arrangement incl inner shutters formounting switch gear etc, suitable arrangement for fixing of electrical meter and SPN 40 to 63 Amp including pre wiring from Bus bar to Meter and Meter to MCB SPN (for pre wiring use 6.00 Sqmm Single core copper cable and suitable size of lugs for connecting from Busbar to meter and meter to MCB SPN)including bottom gland plate with sufficient numbers of circular cable entry holes, including prewired complete as per drawing with masonary work for fixing in wallduly powder coated with comprising of the following :- |
| 141 | INCOMING :- (i)MCCB 100 Amps FP, 415 Volt 25 KA adjustable thermal & fixed magnetic setting Ics = 100% = 01 No of Make : Havells/C&S electric/Legrand/Siemens.(ii) Phase indicating lamp LED type with HRC fuse – 1 Set of three.(iii) ON/OFF indicating lamp on incomer feeder for status of feeder = 02 Nos(iv) Aluminium bus bar 200 Amps capacity with bus bar supports, DMC/SMC insulators of CPRI approved of suitable length insulated heavy heat shrinkable sleeves etc -04 Nos.OUT GOING :-(i)MCB 63 Amp,415 Volt,10 KA, Single pole and neutral -04 No Make : Legrand/Siemens/Schnedier (ii) Refixing of old existing single phase electronic energy meter including connection from SPN to meter with 6 Sqmm copper stranded conductor including earth wire complete all as specified and directed by Engr-in-Charge.Make-HPLor equivalent in Neptune - 04 Nos |
