|
| 1 | M & L for Rendering 10 mm thick in cement mortar 1:4 using water proofing compound @ 3% of weight of cement on RCC roof slab, finished even & smooth without using extra cementas directed by Engineer-in-charge |
| 2 | M&L for 40 mm thickcement conceret 1:2:4 type B-1,(20mm graded aggregate)as in surface channel & floor finish .complete all as specified and as directed. |
| 3 | M & L for taking out old water proofing treatment to RCC roof slab as specified below and as directed by Engineer-in-Charge (a) The roof surface shall be thoroughly wire brushed, washed, dried up & cleaned toremove all foreign materials & dust to receive primer.(b) On the dried roof surface, apply one coat of bituminous primer @ 100 Gm/ Sqm as per manufacturers instruction.(c) On this primed surface, the approved APP modified bituminous membrane with non woven polyester mat asreinforcement weighing not less than 3.5 Kg/ Sqm laid by torch application metho and top surface shall be applied with bituminous aluminium paint.(d) The overlap while torching shall be 75mm on longitudinal direction& 100mm on transverse direction. Note:-Obtain material through out low laying Area |
| 4 | Providing and carrying out water Proofing treatment to toilet, sunkan slabs, wet areas ets, after proper surface prepration, carry out cementitious ingection grouting at leakage point using cebex 100 plasticised expanding grounding admixture, application of polymer modified at slab wall junction using Nitoband SBR latex screen modifier cum bonding agent and application of two coat of brushbond RFX two part acrylic polymer modified cementitious elastomeric waterproof and protective coating etc, complete including 15mm thick cement plaster in CM 1:4 all tools and plant as per manufacturers specification paint complete all as specified and directed. |
| 5 | Dismantling ofPVC water tank of capacity exc 500 litre and n. exc 1000 litre andcomplete all as specified and directed. |
| 6 | Dismantling ofPVC water tank of capacity exc 250 litre and n. exc 500 litre andcomplete all as specified and directed. |
| 7 | S&F rotational moulded Polythene (HDPE) double layer water tanks, cylindrical & vertical type 500 Litres capacity hoisted and fixed in position including provision of 20mm/15mm dia. spouts for connecting inlet, outlet, over flow and washout pipes. |
| 8 | All as per item No. 7 above but 1000 litres. |
| 9 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes exc 250 & n exc 500 ltr, etc. |
| 10 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes exc 500 & n exc 1000 ltr, etc. |
| 11 | Taking down chowkats or frames with shutters ( without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 sqm each and removing to store. |
| 12 | Ditto as above but n\"exc 1.5 Sqm each. |
| 13 | Taking downshutter of any descriptionexc. 1 sqmbut not exc 2 Sqm each complete all as specified and directed. |
| 14 | Supply & Fixing PVC door frame (50x47) mm made out of plain colour 5 mm thich PVC Sheet re in forced with MS Square Tube, supplying & fixing in opening as per specification & drawing |
| 15 | S&F factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC \" C \"Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing. |
| 16 | S/F 30mm thik flush shutter solid core construction with block board core and plywood face panels commercial type on both sides |
| 17 | S&F, 35mm thick 2nd class hard wood glazed & skelton shutters, open repeated & prepared to receive glass, steel wire cloth, gauze etc. without sash bars, edges of framing plain, chamfered or rounded, fitted with cut or mitered beadsfor securing glass, steel wire clothetc, sizes of members of shutters as specified in SSR part I, section 8, clause 8.24(a) Complete all as specified and as directed |
| 18 | S&Ffor pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125 X 60mm. |
| 19 | S&Ffor pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 105 X 60mm. |
| 20 | Cutting holes in stone walls built in cement mortar for inserting hold fast/lugs & making good disturbed portion in CM 1:3 or cement congrete 1:2:4, type B-1 as required (Depth of embedded portion of hold fasts orings measuredfrom the face of the jamb into wall exc half brick but no exc one brick. |
| 21 | S & F three track sliding window including frame with two shutters with 4 mm thick tinted glass and one shutter using stainless steel wire cloth 0.36 mm nominal dia & 1.18 width aperature for mosquito proofing with good quality bearing handle, lock, rubber beading and glasing clips etc fabricated using following aluminium anodised sections confirming to catalogue of \"Jindal\" or of equivalent make complete all as spd and directed by Engr-in-Charge. (a) Bottom frame-20620 (b) Top & Vertical frame - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724(e) Shutter top & bottom -20844 (f) Glazing clips - 19352 (Note :- Cost of tinted glass & wire cloth shall be included in the quoted rate of item) |
| 22 | S&F stainless steel wirecloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stanless steel wire staples. |
| 23 | S&F 3.0 mm thk sheet glass ordinary quality plain and glazing with oil putty in square n\"exc .5 sqm in each pane. |
| 24 | S & F of 150 mm long aluminium anodised barrel tower boltcomplete all as specified and directed. |
| 25 | S & F of 150 mm long extruded anodised aluminium alloy handle,complete all as specified and directed. |
| 26 | S&F 125 mm MS, Butt hinges,medium weight cold rooled fixed with screw or welding complete. |
| 27 | S & F of 250 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt or cast aluminium alloy complete all as specified and directed. |
| 28 | S & F in repairs Ball brass valve high pressure with polythene float and nuts complete screwed for iron pipe or brass furrule bore of pipe 20 mm dia complete all as specified. |
| 29 | Dismantling wall & ceilling boards(fibre pulp insulation etc) or insulation boards/ slabs/blankets, any thickness including cover fillets. |
| 30 | S & F Anodised Alu. Snap grid 605x605 mm frame wk for false ceiling and providing 9mm th Acoustical board/tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed in celing with screws toframe work or with staples on snap grid including hangers 3 mm dia G.I. ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat40 X 3 mm size 60 mm longall as specified |
| 31 | M and L for10 mm thick Polypan PS 20010 Prelam PVC (hallow profile) sheets used for fixing on wall Lining and PVC false ceiling inclusive of necessary fixing as directed by manufacturer and engr-in-charge. |
| 32 | Dismantling asbestos cement (corrugated/ semi corrugated etc) sheet in roof covering complete all as specified and directed. |
| 33 | Dismantling MS worksof any Desc. Not otherwise provided for |
| 34 | S&F TubularSections as in main croos beams , hip and jack rafters; purlins, where connected to common rafter , posts etc. conf to Fe-410-w(gdeE-250 quality-A) |
| 35 | M &L for MS work as in wind tie or any other work incl cutting, drilling holes etc. |
| 36 | S & F 0.5mm thick corrugated pre painted / coloured galvalume sheet in roofing fixing all as per manufactures instructionswith all fittings and accessories etc complete. |
| 37 | All as per item No 36 above above but plain sheet fix in valley gutter / ridge/ View cutter |
| 38 | M&L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxideprimer. |
| 39 | S & F for 10/12 mm thick toughened glass with etching fixed with necessary Ozone patch touch fittings including openable door chamfered edge polishing as in bathing cubical / partitions including all fitting and fixture as per manufasture instructions etccomplete all as specified |
| 40 | Supply and fix in repair for aluminium powder coatedpartition using ‘Jindal’ aluminium SP/ DP section or equivalent make as specified with 5mm thick tinted glass, PVC rubber beading,12mm thick prelaminated particle board fixed with glazing clips etc complete all as specified and as directed. Sections : SP (Single partition)- 20033, DP (Double partition)- 20034,Glazing clips-4407 |
| 41 | Taking up or down steel tubes and connections including cleaning for refixing or removal to stonesbore of pipe 15mm etc all as specified and directed by Engr-in -charge. |
| 42 | All as per item No. 41 above but bore of pipe 20mm |
| 43 | M&L GI tubes, medium grade with all fittings and fixed complete to walls, ceiling or laid in floors, bore of pipe 15mm |
| 44 | All as per item No.43 above but bore of pipe 20mm |
| 45 | Refixing old steel tubing and connections in new or old position (wall, ceiling, floor etc) 15mm bore |
| 46 | All as per item No. 45 above but bore of pipe 20 mm |
| 47 | Supplying and laying15 mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl all fittings complete all as specified |
| 48 | Supplying and laying 20 mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floorsincl all fittings complete all as specified |
| 49 | S&F in repair stop valves fancy typecast copper alloy with capstan heads screwed down high pressurescrewed both ends for iron pipe or union fixed for 15 mm dia GI pipe. |
| 50 | S&F in repairs bib taps cast copper alloywith capstan headsscrewed down, screwed for iron pipe or for brass furrule and fixed for 15mm dia pipe. |
| 51 | S & F in repairs pillar taps fancy type ,chromium plated with capstan headsscrewed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe. |
| 52 | S & F in repairs Brass cromium platedwith capstan headsshower rose of 125 mm dia complete all as specified. |
| 53 | S&F Grating round 140 mm size of PTMT (Minimum weight 50gms.) with or without hole |
| 54 | S& F in repairs stainless steel Sinks kitchen or laboratory with plugs, washers and wastes; including beding in cement mortar overall size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete including fixing cantilever brackets and connecting union to waste pipe; upto 0.5 sqm each complete all as specified.(Note : Stainless steel sink to be provided in lieu of ground cemented washing area, hence no credit) |
| 55 | S/F in repairs Vitreous china wash basin white flat back size 550 x 400mm including , waste pipe and plug and porcelain stopper and brackets incl cutting for and pinning in ends of brackets or erecting stand along with 32mm dia CP waste coupling and PVC waste pipe complete all as directed. |
| 56 | S & F for PVC connection pipe 15mm dia with PTMT nuts of length 450mm |
| 57 | S&F as in repairsPVC low/highlevel flushing cristern white 10 litre capacity incl PVC inlet pipe with brass check low level full both sides alongwith PVC flush pipe 32mm dia jointed to WC and handle incl bracats fixed in repairs all as directed. (Note:- Removing existing fluhing system of CI or any other quality incl brackets). |
| 58 | S & F in repair 600xmmx450mm bevelled edge mirror of selected quality galss, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 59 | S&F in repairs plastic water closet seat, black / White closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging deivce. |
| 60 | M & L for preparation of newwooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 61 | S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white complete incl seat and cover, flush pipe incl all joints complete |
| 62 | S & F in repairs Pulley Operated Cloths Drying system of 7 feets consisting of aluminium Pipe of outer dia 22 mm , inner dia 19.8 mm pulleys made up of derin with rope guide mounted on channel pair of length 24\" (Distance between two pipe is adjustable ) looking system to hide rope knot channel to be mounted or fixed with self -tapping screws provided in KIT rope will be HDPE double core of 4 mm dia fixing to ceiling / Wall as specified and directed by Engr-in-charge. |
| 63 | S & F in repairs Pulley Operated Cloths Drying system of 8 feets consisting of aluminium Pipe of outer dia 22 mm , inner dia 19.8 mm pulleys made up of derin with rope guide mounted on channel pair of length 24\" (Distance between two pipe is adjustable ) looking system to hide rope knot channel to be mounted or fixed with self -tapping screws provided in KIT rope will be HDPE double core of 4 mm dia fixing to ceiling / Wall as specified and directed by Engr-in-charge. |
| 64 | S&F, in repair 18/19 mm thick MDF board, exterior grade pre laminated one side with decorative choice lamination & other side balancing white lamination as in kitchen cabinet, Cupboard etc. or fixed with screws to timber frame work, complete all as specified and as directed. |
| 65 | S&F External teak wood lipping 6 mm thick for 18/19 mm thick particles board, block board or veneered particle board fixed with nails. |
| 66 | S&F, 100mm size Hasp and staple, safety type aluminium anodized stove enameled black with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed |
| 67 | Demolition of brick work or concrete block masorary work built in cement mortar and disposing of debris out of MOD land all as directed. |
| 68 | M&L for brick work with sub class \"B\" bricks straight or curved on plain exc. 6m mean radius built in CM 1:6 all as specified and as directed. |
| 69 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar. |
| 70 | M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed no pigment to match the shade of the slab including rubbing and polishing complete all as specified. |
| 71 | M&L for Marble work green marble 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade complete all as specified. |
| 72 | Material and labour for 20 mm thick granite stone machine cut (table rubbed and polished) bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone including grinding and polishing, rounding to edges of granite stone etc.complete all as specified and directed. |
| 73 | M&L machine cut kota stone slab flooring 20-25mm thick over and including cement screed based 15 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cuttingpolishing and rubbing complete. |
| 74 | M&L for rendering 15 mm thick in CM 1:6 on fair faces of brick walls finished even and smooth w/o using extra cement. |
| 75 | M&L for rendering 15 mm thickin CM 1:4 on fair faces of brick work or conrete surfaces finishing the surfaces even and smooth without using extra cement. |
| 76 | M&L for preparing new plastered surfaces & applying two coats of cement base paint on walls. |
| 77 | M&L for preparation of new surfaces plastered or unplastered new surfaces & applying two coats of oil emulsion distemperon walls. |
| 78 | M&L For plain cement 1:2:4 type B2(using 40mm graded stone agregate)as in Cement concrete in surface channels and drains complete all as specified. |
| 79 | Extra for forming fair finished drain or channel 60 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stoped ends etc. |
| 80 | Dismantling floor hearth or wall tiling incl cement mortar bedding/plaster (but not backing) and removing rubbish off the premises etc complete all as directed. |
| 81 | M&L for vitrifiedcoloured tiles 8 to 10mm th (square/rectangular) polished area of each tile exc 0.30 sqm but n.exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm th screed bed in CM 1:6 complete all as specified. |
| 82 | All as per item No 81 but on skirting over 8 to 10 mm th backing coat in CM 1:4 complete all as specified and as directed. |
| 83 | M&L for Glazed ceramic tiles 350mm x 250mm/ 450mmX350mmX7 to 8 mm thick (square/rectangular) of approved colour on vertical surface, set and jointed in neat cement slurry and pointed with coloured cement to match the tile colourover 10mm thick rendering in CM (1:4) for wall. |
| 84 | M&L Non skid ceremic coloured tiles 7 to8mm thick (square/rectangular)area of each tile exc. 0.06sqm but not exc. 0.11sqm, in floors etc , set and jointed in neat cement sluury and pointed in white or coloured cement to match the coloured tiles including 15mm thick screed bedor bedding layer in CM 1:6 for laying floor finishes all as specified and as directed. |
| 85 | Demolition of PCCin ground floor & pavings incl tiles etc n exc 15cm thickness (below or above ground level) and disposing of debris out of MOD land all as directed. |
| 86 | M & L 75 mm thk Cement conc type C-2, 1:3:6 (40 mm gr agg) as in plinth protection finished even and fair. |
| 87 | M & L PCC type D2 1:4:8 (40 mm Gr. Agg ) 75mm thickas insub base complete all as specified. |
| 88 | M&L for laying machine pressed precast concrete interlocking reflective coloured (Glossy finish)rubber moulded pavers block any shape and size confirming to IS 15658-2006 of 55mm to 60mm thick, M-35 Grade over 30 mm thick sand layer watering and ramming all as specified. |
| 89 | M& L Chequared Cement Concrete (Glossy finish) rubber moulded Tiles 30 CM x 30 CM X 25 mm th set and jointed in cement slurry and pointed in neatgrey cement&pigment in floors over screed bed 15 mm thk in cm 1:6 .complete all as specified. |
| 90 | Supply only integral water proofing compound |
| 91 | M&L for PCC type B1(1:2:4, using 20mm graded stone aggregate) as in bed blocks/coping/ edging all as specified and directed. |
| 92 | Providing precast cement concrete type BO 1:2:4(12.5 mm Graded Aggregate) louvres and jallies, 25mm thick (mea sured solid), in cludingall mouldings but excluding frame (Pre cast frame shall be measured seperately) |
