Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 16-12-2025 | Corrigendum | BOQ | 27-12-2025 |
| Sl. No. | Item Description |
| 1 | Dismantling floor hearth/ stone slabs/mosaic tile flooring or wall tiling including cement mortar bedding (but not backing) and removing servicebale tiles to stores and rubbish off rubbish off the same out side the MD land complete all as specified and as directed. |
| 2 | S&F Vitrified Coloured Ceramic tiles (light shade) 8-9mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed of 15mm thick in CM 1:6 etccomplete all as specified and as directed. |
| 3 | S&F for Vitrified coloured ceramic tiles (light shade) 8-9mm thick (square/rectangular) area of each tilenot exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 10 mm thick rendering in cement mortar 1:6. etc complete all as specified and as directed.Note : The width of tiles 100 mm to be cut from full size of tiles as directed by Engineer-in-charge. |
| 4 | S&F coloured glazed ceramic tile in vertical surface 300x450x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick screed bed in CM 1:3 complete all as specified and directed. |
| 5 | M&L 18-20 mm thick Graniteblack colour including rounding edges to exposed portion as in platforms for wash hand basin / sink (table, rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like laid in cement mortar (1:4) incl pointing in white cement (1:2) using mable dust with admixture of pigments to match with shade granite including cutting for securing of slab,including after dismantling of existing any type of stone or concrete etc complete all as specified and as directed. |
| 6 | M & L 18-20mm thick Granite black colour including rounding edges to exposed portion tiles machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing ,including after dismantling of existing any type of stone or concrete etc complete all as specified and as directed. |
| 7 | M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing, Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified. |
| 8 | M & L Machine cut mirror polished kota stone slab flooring 20-25mm thick for steps in single piece over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over a screed of 15mm thick in CM 1:6 etc complete all as specified and directed. |
| 9 | M&L for Demolition of un-reinforced cement Concrete of any description and in any position not otherwise specifically provided for sunken slabs. |
| 10 | M&L for 100 mm thick cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base or sub floors finishing the surfaces even and rough to receive the topping layer complete all as specified and directed. |
| 11 | M&L floor coloured vitrified heavy duty ceramic scratch and stain resistant external tiles of size 40cmx40cmx12 mm thick laid over 15 mm thick CM (1:6) set jointed and pointed in neat cement slurry in floors complete all as specified and directed. |
| 12 | Demolishingreinforced cemet concrete Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work including cutting of reinforcement. |
| 13 | M &L providing cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) in roof/Chajjas kerb or mud stops, rounded or chamfered as pading concerete. |
| 14 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm etc complete all as specified and directed. |
| 15 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm and exc. 4 Sqm etc complete all as specified and directed. |
| 16 | Taking down of shutter exc 2.0 Sqm each complete all as specified and directed. |
| 17 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work fordoors,windows, ventilators and partitions (Fixed portions) with extruded built up standard 2/3 track sliding/rectangular/squaresection of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. complete all as specified. |
| 18 | S&F powder coated Anodised aluminium sliding windowshutter type without sash bars, aluminium sections weighing 0.55 kg/m including powder coating of any colour ,thickness not lessthan 50 microns necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary locking arrangement and roller complete all as specified. |
| 19 | S & F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each panecomplete all as specified. |
| 20 | S&F 4mm thick figured glass pin headed type and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified. |
| 21 | S&FStainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples. |
| 22 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 23 | S&F Factory Made single extruded WPC (Wood polymer composite) solid door/windows and other frames / chowkats of size 45mm x 70mm single rebated comprising of virgin PVC polymer of K value 58-60 (SuspensionGrade) calcium carbonate and natural fibres (Wood powder/rice husk/wheat husk) and Non-toxic additives (Maximum toxicity index of 12 for 100 gms) fabricated with mitred joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws withdrawal strength of 2200 N (Face) and 1100 N (Edge) minimum compressive strength of 58 N/Sq mm, modulas of elasticity 900 N/Sq mm and resistance to spread flame of Class A category with property of being termite / borer proof, water/moisture proof and fire retardant and fixed in position with MS holdfast/lugs/SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge. (MS holdfast/lugs or SS dash fastener shall be paid for separately). |
| 24 | S&F Factory Made solid PVC moulded door shutter 28 to 30mm thick (Stiles) with 2, 4, 6 raised panels design with 2mm thick moulded prelam PVC sheet on the front and back face with particle board core and fixing in the frame at site as per specification and drawings. |
| 25 | S&F Factory Made single extruded WPC (Wood polymer composite) solid door/windows and other frames / chowkats of size 65mm x 125mm single rebated comprising of virgin PVC polymer of K value 58-60 (SuspensionGrade) calcium carbonate and natural fibres (Wood powder/rice husk/wheat husk) and Non-toxic additives (Maximum toxicity index of 12 for 100 gms) fabricated with mitred joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws withdrawal strength of 2200 N (Face) and 1100 N (Edge) minimum compressive strength of 58 N/Sq mm, modulas of elasticity 900 N/Sq mm and resistance to spread flame of Class A category with property of being termite / borer proof, water/moisture proof and fire retardant and fixed in position with MS holdfast/lugs/SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge. (MS holdfast/lugs or SS dash fastener shall be paid for separately). |
| 26 | Ditto but of Frame size 65x 100 mm. |
| 27 | S&F 30 mm thick factory made Flush shutters, solid core construction, with particle board core and plywood face panels,complete all as specified. |
| 28 | S&F 30 mm thick IInd class hard wood glazed and skelton shutters open rebated and prepared to receive glass , gauge etc divided in to squares with plain, chamfered or rounded mittered and rebated sash bars any numbers, edges of framing plain chamfered complete all as specified. |
| 29 | S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified. |
| 30 | S&F in repairs 200 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified. |
| 31 | S&F 150 mm long aluminium anodized barrel tower bolts for PVC doorsof extruded section complete all as specified. |
| 32 | S&F Stainless steel butt hinges of size 100mm fixed Complete all as specified and as directed. |
| 33 | S&F stainless steel 75 mm butt hinges for doors complete all as specified complete all as specified and directed. |
| 34 | S&F for floor door stopper(double) of aluminium alloy body and tongue anodised with hard drawn steel springfixed to dooroverall length of cover plate 150mm complete all as specified. |
| 35 | S&F 150 mm size extruded aluminium alloy handles for doors fabricated type anodized complete all as specified. |
| 36 | Dismantling boarding of any description fixed in any position fixed with screws |
| 37 | Kitchen Cabinet Bottom Unit:Providing and fixing of machine crafted box type cabinet bottom unit 560 mm depth using 19 mm Boiling Water Proof plywood (BWP) with 0.8 mm laminate on both sides. The shutters will also be machine crafted with the same BWP, with 0.8 mm inside laminate white on the outside it will be 1 mm laminate of glossy finish and a machined edge band of 2 mm. The hinges will be auto loaded hinges of \"Hettich\" make, which is of IS standards. The shelf is to be adjustable with two slots provided at 300 mm spacing so as to accommodate the shelf. The plywood should be of thickness 19 mm Boiling Water Proof plywood (BWP) with 0.8 mm laminate on top and bottom with Machine Cut edge band of 1 mm thick complete all as specified and as directed.Including following Kitchen Accessories with soft clossures in each officers MDaccn (Total 4 Accns- average area -8 Sqm each)Cutlery basket 530 mm x 510 mm x 100 mmCup & Saucer 380 mm x 510 mm x 100 mmPlate (Thali) 530 mm x 510 mm x 150 mmPlain 380 mm x 510 mm x 150 mmPlain 530 mm x 510 mm x 200 mmDetergent Holder 380 mm x 510 mm x 200 mmOil pullout 160 mm x 510 mm x 585 mmTelescopic drawer channelsDustbin holderNotes:-(a) Rates quoted shall be inclusive of removal of old shutters and builders hardware etc(b) only front area of the shutters (Cabinets) will be measured and paid |
| 38 | M&L 18mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work etc complete all as specified and as directed . |
| 39 | M&L 12mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work etc complete all as specified and as directed . |
| 40 | M&L for 0.9mm thk Decorative laminate type I of surface finish ,colour and pattern as approved fixed with approved adhesive all as per makers instructions and etc complete all as specified and as directed. |
| 41 | M & L 2nd class hardwood plain fillets exc 13 n.exc 25 sqcm square,rectangular or triangular in section, clean sawn, secured with nails/screws including two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 42 | S & F 6mm thickteak wood lipping to exposed surfaces of block board or particle board fixed with nails complete all as specified and as directed. |
| 43 | S&F soft closing hinges for cabinets doors complete all as specified |
| 44 | S&F MS 40mm dia, drawer/cupboard knobs fixed with nut, screw and washer of brass polished, bright finished complete all as specified. |
| 45 | S&F magnetic catcher of approved sizeand pattern fixed to shutters etc complete all as specified and directed. |
| 46 | S&F2nd class hardwood plain, solid, straight chowkats and frames, wrought frame rebated on the solid, rounded or chamfered put together with glue pinned at joints with grooves on both sides for fixing panelled shutter and wire mesh door shutter complete all as specified and directed by Engineer-in-Charge. |
| 47 | Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed. |
| 48 | M&L for pre-cast cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in block masonry with solid blocks, exc. 10cm in width and setting in cement mortar 1:6, complete all as specified and as directed. |
| 49 | Cutting chases, pinning in, stone concrete block or slabs wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth and removal of debris otside of MOD land complete all as specified. |
| 50 | S & F in repair of CPVC pipes 25mm Incl. SDR 11Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 20 mm GI pipe complete all as specified. |
| 51 | S & F in repairof CPVC pipes 20mm all SDR 11 Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 15 mm GI pipe complete all as specified. |
| 52 | S&F in repairs CPVC tank union20mminternal dia complete all as specified and as directed |
| 53 | S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floorsincluding dismantling and breaking of pipe and fittings complete all as specified and as directed. |
| 54 | S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls with fastnersincluding dismantling and breaking of pipe and fittings complete all as specified and as directed. |
| 55 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to floor with fastnersincluding dismantling and breaking of pipe and fittings complete all as specified and as directed. |
| 56 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls with fastnersincluding dismantling and breaking of pipe and fittings complete all as specified and as directed. |
| 57 | S&F PVC (SWR), junction single, (Single T) equal or unequal 75mm dia with access door |
| 58 | S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia with access door |
| 59 | S&F in repair PVC bends anyradius75mm diacomplete all as specified and as directed. |
| 60 | S&F in repairPVC bends anyradius 110mm diacomplete all as specified and as directed. |
| 61 | S&F PVC (SWR) vent cowl 75mm dia |
| 62 | Dismantling of existing water tanks exc 500 ltr to n.exc 1000 ltrand removingfrom site complete all as specified and directed. |
| 63 | Dismantling of existing water tanks exc 250 ltr and not exc 500 ltr and removing from site complete all as specified and directed. |
| 64 | S & F 1000ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position and connecting up pipes, securing access covers etc.,all as specified in SSR Part I |
| 65 | S & F 500ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position and connecting up pipes, securing access covers etc.,all as specified in SSR Part I |
| 66 | S&F 25 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as Specified |
| 67 | S&F 25mm Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms |
| 68 | S&F of 20 mm dia CPVC brass elbow complete all as specified and as directed. |
| 69 | S&F of 20 mm dia CPVC Brass Tee complete all as specified and as directed. |
| 70 | S&F of 20 mm dia male brass threaded adapter complete all as specified and as directed. |
| 71 | S&F of 20 mm dia female brass threaded adapter complete all as specified and as directed. |
| 72 | S&F in repairs standard size EWC white colour with P/S trap white coloured with and including PVC white colouredseat cover 10 ltr capacity PVC valveless, syphonic action type, low level flushing cistern with inlet, ball valve, float valve and handle including brackets including all connecting to flushing cistern. |
| 73 | S&F in repair vitreous china WHB white, flat back size 550mm x 400 mm including cutting for and pinning in ends of MS brackets, 32mm dia waste coupling etc and making good wall or floor fitting to match existing surface complete all as specified and directed. |
| 74 | Supply & fix in repairs swan neck Pillar tap cast copper alloy with quarter turn single lever, fancy type, chromium plated screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe & fixed, complete15 mm dia suitable for WHB complete all as specified and directed by Engr-in-Charge. |
| 75 | S&F in repairs Health Faucet with 1 metre CP flexible tube & hookand all necessary fittings all as specified and directed. |
| 76 | S & F in repairsbib cock (long body) double handle with flange and all necessary fittings all as specified and directed. |
| 77 | S&F in repairs 2 way bib cock double handle with flange and all necessary fittings all as specified and directed. |
| 78 | S&F in repair chromium plated fancy typebib tap 15mm complete at any position etc complete all as specified and as directed. |
| 79 | S&F in repairs angle valves 15 mm nominal bore, brass, chromium plated,complete, fixed in repairs, all as specified and directed. |
| 80 | S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 81 | S&F in repairs 75mm dia PVC Nahani trap with grating doom 100/125 mm dia of Stainless steel (Minimum weight 40 gms) with waste hole complete all as specified and directed. |
| 82 | S&F in repair 32mm dia white colour PVC collapssible waste pipe for wash basin / kitchen sink water outletcomplete all as specified and directed. |
| 83 | S&F in repair 125mm dia brass chromium plated shower rose including arm with or without swivel joints including fixing to steel pipe or union complete all as specified and directed by Engr-In Charge. |
| 84 | S&F in repair brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed |
| 85 | S&F in repairsSS soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed. |
| 86 | S&F in repair Brass Chromium plated fancy type towel rail, 20mm dia, D type 600mm long between flanges including brass CP brackets complete all as specified and directed by Engr-In Charge. |
| 87 | S&F in repair towel ring of long PTMT fixed with and including chromium plated brass screwes and wooden/plastic cleats (minimum weight 90gms) complete all as specified and directed. |
| 88 | S & F in repairs looking mirror of 5 mm thick 500mmx700mm with double coat for protection and longevity grounded edges for safety and silver plating on the back for better refelection and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed. |
| 89 | S&Fin repairs stainless steel sinkmade of stainless steel l mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowlsize 410mm x 330mm x 160mmmade, complete all as specified. |
| 90 | S&F in repairs stainless steel plate rack standard size 31\"X36\"X9\" inch complete and fixing with rawl plug and steel screws, complete |
| 91 | S&F in repair 25mm dia stainless steelcurtain rod including 2 Pair of fancy typebrackets ,fixed with 45cm long mild steel screws complete all as specified |
| 92 | Taking down cement plaster includingracking out joints hacking for keyscrubbingdown with water etc complete all as specified and as directed. |
| 93 | M&L for rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces such as wall finished even and fair without using extra cement complete all as specified and directed. |
| 94 | M&L for rendering 15mm thick in CM (1:4) on brick/concrete surfaces with 3% water proofing compound in finishing coat and finishing the surface even and fair complete all as specified and directed.(Note :- WPC will be measured and paid seperately). |
| 95 | M&L for rendering 5mmthick in CM 1:3 on ceiling of concrete surfaces finished even and smooth without using extra cementincluding taking down plaster, raking out joints, hacking for key, scrubbing down with water etc and removing rubbish of the premisesall as specified and as directed. |
| 96 | M & L for applyingtwo coats of oil emulsion distemper on newly plastered surfaces incl preparing the surfaces over a coat of 1 mm thick birla wall care putty complete all as specified and directed . |
| 97 | M&L for washing, rubbing down and stopping of distempered surfaces on old plastered surfaces of wallsand applying two coats of oil emulsion distemper over a coat of 1mm thick birla wall care putty, complete all as specified and directed. |
| 98 | M&L for newly plaster surfaces of Wallandapplying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm inclall necessary safety norms to the workers all as specified and directed. |
| 99 | M&L for washing, rubbing, brooming on newly plastered surfaces after surface preparation of walls and applying two coats of Premium acrylic emulsion weather coat UV resistance, Alkali & fungal resistance, dirt resistance exterior paint of \"Make : Apex ultima from Asian Paints/Berger weather coat all guard/Dulax weathershield mMax/Nerolac Excel top Guard\" and must have an interval of 4 to 6 hours between the 1st and 2nd coat of approved shade (Company Depot Tinted) over one coat of elastomeric exterior weather coat primer @ 0.90 litre/ 10 sqm incl all necessary safety norms to the workers all as specified and directed. |
| 100 | M&L for preparation of new plastered or unplastered surfaces of ceiling and applying two coat of oil emulsion, distemper incl priming the surface with alkali resistant primimg paint complete all as specified and as directed. |
| 101 | M&L for preparation of old decorated /painted surfaces of ceilng and applying one coat of oil emulsion, distemper all as including cleaningsplashes of distemeper on floor/objects etc all as specified and directed. |
| 102 | M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 103 | M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and as directed. |
| 104 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 105 | S&F rectangular/Square hollow mild steel section as in purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc |
| 106 | Dismantling oldwater proofingtreatmentandroof tiling including screed bed and cleaning the surface with wire brushes,removing dust,foreign material and rubbish and removing off the samr out side the MD land all as specified and as directed |
| 107 | M&L for providing, cement concretetype B-0 (1:2:4) using 12.5mm graded stone aggregate asin roof kerbs, padding or mud stops, rounded or chamfered on edges all as specified and directed |
| 108 | M&L for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry (1:3) complete all as specified and directed. |
| 109 | M&L for rendering 10mm thick in cement mortar 1:3 on roof padding finished even and fair with approved water proofing compound @ 200ml per 50kg ofcement or as per manufacturer\"s instruction all as specified and as directed.(Note : WPC shall be measured and paid separately as supply only under relevent item) |
| 110 | M&L for water proofing treatment on horizontal and vertical surfaces with Providing and laying / fixing TPO (Thermoplastic Polyolefin) membraneinclCleaning the surface and laying of 200GSM Geo textile and cover up with TPO RF 1.2 mm thermoplastic membrane on roof & up to 300 mm of parapets and crumple joint including junction of roof and parapet, welding the seam joints with hot air gun/machine and terminate the corners with extra protection to bear the high wind pressure. The TPO should be thoughroly tightened with the lower structure using mechanical fastening properly to avoid the corners and seam joint failure.Make :Asian paints TPO or equivalent product of M/sauchemic/CIPY/SIKA/Pidilite/Dr fixit TO membrane |
| 111 | Supply only liquid water proofing compound complete all as specified and as directed. |
| 112 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. |
| 113 | M & L for point wiring with 1100 Volts grade 1.5 sqmm PVC insulated FRLSH unsheathed cable with multistandred copper conductor conforming to IS: 694:1990 (for Phase, Neutral and and Earth) in and including Non metalic PVC rigid condiut medium grade/ casing caping sutaible at site with ISI mark of appropriate size with all accessories laid in wall/ ceiling/flooretc, concealed with GIflush in box/terminal boxes of sutaible size, including front plate for mounting of modular switch/ socket and combined cover plate with fitting screw washer, including cutting chasses in wall/floor/roof for fixing of conduit and flush in box and making good the distributed surfaces matching with existing complete all as specified and as directed for following-One light/ Bell/ fan point controlled by one switch |
| 114 | All as per Item No 113 above here in before butfor Modular type Socket6/10 Amp of two module in independent board, 230 volts complete all as specified and directed by Engr-In-Charge. |
| 115 | All as per Item No 113 above here in before butfor Modular type Socket6/10 Amp of two module on same board, 230 volts complete all as specified and directed by Engr-In-Charge. |
| 116 | All as per Item No 113 above here in before butfor Modular type additional light / fan point on the same switch circuit mounted on same switch board controlled with separate switch, 230 volts complete all as specified and directed by Engr-In-Charge. |
| 117 | All as per Item no 113above here in before but with 2.5 sqmm PVC insulated FRLSH unsheathed cable with GI Flush in box for modular switch/ socket 16 Amps of sutaible size as required with front plate for mounting of modular switch/ socket and combined cover plate of as required at site complete all as specified and as directed by Engr-in-Charge. |
| 118 | S&F for modular switch piano, flush type single pole, one way 16 Amps, 230 Volts complete all as specified and directed by Engr-In-Charge. |
| 119 | S&F for Modular type Socket 6/16 Amp two way of 230 volts complete all as specified and directed by Engr-In-Charge. |
| 120 | S&F for modular switch piano, flush type single pole, one way 5/6 Amps, 230 Volts complete all as specified and directed by Engr-In-Charge. |
| 121 | S&F for Modular type Socket 6/10 Amp of two way point complete all as specified and as deirected by engr in charge |
| 122 | S&F for Modular type fan regulator 1/2 module as reqd, 230 volts complete all as specified and directed by Engr-In-Charge. |
| 123 | S&F for Modular type bell push switch one way 6/10 Amps, 230 volts matching with existing complete all as specified and directed by Engr-In-Charge. |
| 124 | S&F Call bell AC, 230 Volts matching with existing sample complete all as specified and directed by Engr-In-Charge. |
| 125 | M&L ceiling rose surface bakelite 65x50 mm two to three terminals.complete all as specified and as directed by Engr-In-Charge. |
| 126 | S & F of Single pole and neutral enclosure 10Amp, 230Vwith a two pin and earth plug and socket complete with one single pole MCB 230V complete all as specified and as directed by Engr-In-Charge. |
| 127 | M&L sub main wiring surface type with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 10 Sqmm, 1100 volts grade (FRLS)and one run of 10 Sqmm PVC insulated multi stranded copper conductor for earth continuityconductor drawn through concealedin wall PVC conduit complete all as specified and as directed by Engr-In-Charge. (Note :- Two runs of 10 Sqmm cable, one run of 10 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length). |
| 128 | M&L sub main wiring surface type with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 6 Sqmm, 1100 volts grade (FRLS)and one run of 6 Sqmm PVC insulated multi stranded copper conductor for earth continuityconductor drawn through concealedin wall PVC conduit complete all as specified and as directed by Engr-In-Charge. (Note :- Two runs of 6 Sqmm cable, one run of 6 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length). |
| 129 | S & F in replacement VTPN DB - Dobule Door made out of CRCA mild steel sheet flushed in wall, TPN 4 way with 200 Amp rated bus bar, 415 volt with PVC MCB blanking plate, stove enamelled for incorporated of MCBs, insulators and MCCB of capacity upto 125 Amps TP/FPetc, complete all as specified and as directed by engineer in charge |
| 130 | S&F MCB, DB double door type, made out of CRCA mild steel sheet flushed in wall,SPN 8 way with 200 Amps rated bus bar , 240 volts IP-43, withPVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB\"s and isolators etc includingcomplete all as specified and as directed complete all as specified and as directed by Engr-In-Charge. |
| 131 | Supply and fixing MCCB FP 415 Volts 100 Amps, 16 KA complete all as specifed and directed by Engr-In-Charge. (Make- Indo Asian/ Havells/L&T) |
| 132 | Supply and fixingMCBSPN 40 Amps, 240 Volts complete all as specified and as directed by Engr-In-Charge. |
| 133 | Supply & fixing MCB SP 06-40 Amp, AC, 240 volts, complete all as specified and as directed by Engr-In-Charge. |
| 134 | Supply andfixing surface & wall mounted LED batten 4feet with extruded aluminium housing and robust construction 20 W system lumenincluding flexible copper 2 core wire from tube light fitting to ceiling rose required lengthwith all accessories all as specified and directed by Engr-in-Charge. |
| 135 | Supply andfixing surface & wall mounted LED batten 2feet 10 W with luminious efficacy not less than 100 lumen/wattincluding flexible copper 2/3 core wire from tube light fitting to ceiling rose with mounting provisions and all accessories with color of light warm white/cool day light as reqd at sitecomplete all as specified and directed by Engr-in-Charge. |
| 136 | S&F in replacement wall mounting fancy light fitting in plastic body with lamp holder B22 base and diffiuser sutaible for and including 9w LED Lamp of colour as decided with mounting provision complete all as secified as directed by Engr-in-Charge. |
| 137 | S&F LED weather proof bulk head light fitting of shape and size as per site requirment of wattage upto 10wattlight fitting with mounting clamp, LED driver holder, LED lamps etc including connecting up to in celling rose complete all as specified and as directed by Engr-in-Charge. |
| 138 | S & F LED flood light 30W made up ofpressure die cast aluminium housing wth toughened glass and LEDs as a light source prewired with electronic driver suitable for 30 watts light fitting with IP 65 protection with Surge protection device for protection of LED driver, lumen efficacy of light fitting shall be not less than 100 lm/W. withnecessary mounting arrangements colour as per deside at site including taking down old unserviceable light fitting.complete all as specified and directed by Engr-in-charge. |
| 139 | Taking down unserviceable ceiling fan, wall mounted fan, cabin fan, exhaust fans etc of any type and size from position, disconnecting electric supply, repair/replacement of unserviceable items, including cleaning oiling/greasing,tightening of nut bolt and refixing matching with existing. complete all as specified and directed by Engr-In-Charge. |
| 140 | Supply only following items to be fixed under item no -139 complete all as specified and directed by Engr-In-Charge.Ball/Roller bearing of size and shape matching with existing suitable for ceiling fans |
| 141 | Supply only following items to be fixed under item no -139 complete all as specified and directed by Engr-In-Charge.Ball/Roller bearing of size and shape matching with existing suitable for exhaust fans |
| 142 | Gun metal bush of size and shape matching with existing suitable for ceiling fans |
| 143 | Gun metal bush of size and shape matching with existing suitable for Exhaust fans |
| 144 | Motor stator for ceiling fans wounded with copper wire of size matching with existing with insulation with casing complete. |
| 145 | Motor stator for exhaust fans upto 250 mm sweep wounded with copper wire of size matching with existing with insulation and casing matching with existing complete. |
| 146 | Motor rotor prewiredfor ceiling fans of size and type matching with existing |
| 147 | Motor rotor prewired for Exhaust fans/wall mounted fans of size and type matching with existing |
| 148 | Fan blades for ceiling fan of any type and size matching with existing |
| 149 | Fan blade for exhaust fan metal body any type and size with mounting provisions matching with existing. |
| 150 | Plastic cup with screw for ceiling fans |
| 151 | Rubber bush with MS bolts, nuts & washers with \"U\" clamps for ceiling fans complete all as specified and as directed. |
| 152 | S&F in replacement capacitor 2.5 Mfd suitable for ceiling / exhaust /wall mounting fans complete all as specified and as directed. |
| 153 | S&F in replacement down rod of 30/45 cm with nut, bolts and safety pin for ceiling fans complete all as specified and as directed. |
| 154 | M&L for Preparation of surface & painting the ceiling fans with blades complete after cleaning & applying one coat of stove enamelled white paint by spray painting, writing No complete all as specified & as directed by Engr -in-Charge. |
| 155 | M&L for Preparation of surface & painting the Exaust fans with blades complete after cleaning & applying one coat of stove enamelled white paint by spray painting, writing No complete all as specified & as directed by Engr -in-Charge. |
| 156 | Taking down, dismantling of geysers of any type/capacity from site for repair and Inspection, cleaning, descaling, brazing inner tank, internal wiring including replacement of unserviceable items as reqd, reassembling & reinstallation after necessary repair incuding testing after repair complete all as specified & directed. Note :(a) Replacement of major unserviceable items shall be measured & paid separatelyunder respective item of work..(b)Cost of replacement for minor items like washers, gaskets, nuts, bolts etc and items not mentioned below is deemed to be include in quoted rates. |
| 157 | Supply only following items to be fixed under item no -140 complete all as specified and directed by Engr-In-Charge.Inner tank for geyser of capacity 25 ltrs of shape matching with existing. |
| 158 | Siphon Assembly suitable for geyser of capacity 25 ltrs of shape matching with existing. |
| 159 | Heating element rated 1.5/2.0 KW with mounting provisions round/tikona as reqd of shapematching with existing |
| 160 | Thermostat with auto cutoff provision switch capillary/screw type, with range 0-80 deg celcius of shape and size matching with existing suitable for geyser of capacity 25/50 Ltrs. |
| 161 | Indicator lamp red and green with coloured diffuser for geysers matching with existing. |
| 162 | Safety valve/high pressure valve matching with existing for geysers |
| 163 | NRV for geysers matching with existing. |
| 164 | Base fixing cover matching with existing. |
| 165 | Cover outer for geyser of capacity 25/50 ltrs of shape and size matching with existing. |
| 166 | S&F in replacement meter box, Size not less than 200mm x 150mm x 100mm, fabricated out of sheet steel, wall mounting meter box suitable for mounting 1 nos energy meters of size matching with existing, concealed type, painted with stove enamelled paint over a coat of red oxide primer on 2.0mm thick sheet steel, weather proof with double stud hinged door front open with internal locking arrengement and externally locking arrengement with aldrop bolt and meter mounting sheet sutaible size shouldbe fixed inside box including dismantling old meters and cutouts from old box and refixing energy meter with complete connection in new meter box complete all as specifed and as directed by Engr-In-Charge. |
| 167 | M & Learthing complete with GI earth plate Electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth plate not less than2.25 Metre deep below ground level)with top edge of the plate not less than1.5 metrebelownormal ground levelconnected to galvanished earth wire4.0 mmdia bymeans ofbolts, nuts check and washers ofGI or steel all as shown in electrical plate No. 3 of SSR Pt -Iconnected to earthingtest point all as specified or indicated including GI pipe 15 mm dia light grade for earth wire protection, necessary excavation,earth work in any typeof soil, PCC chamberand RCC cover slab, connecting lead wire from test point to DB complete all as specified & as directed by Engr-In-Charge. |
| 168 | Supply, laying and testing cable XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 Sqmm x 4 core including taking down unserviceable UG cable complete all as specified and directed by Engr-In-Charge. (Make-Polycab/Havells/Finolex) |
| 169 | Excavation in trenches in soft /loosesoil notexceeding 1.5 M wide and not exceeding 1.5 M in depth for laying of UG cables etc and getting out complete all as specified and as directed by Engr-In-Charge. |
| 170 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cms in any type of soil complete all as specified and as directed by Engr-In-Charge. |
| 171 | Removing excavated soil to a distance not exceeding 50 mtrs and depositing where directed at a level not exceeding1.5 M above the starting pointall as directed. |
| 172 | M&L for sand cushioning in trenches for bricks of u/g cable with coarse sand laid dry in trenches with uniform thickness complete all as specified and as directed by Engr-In-Charge. |
| 173 | Supply and lay burnt bricks of sub class \"B\" laid dry acrossin trenches for cable protection all as specified and directed Complete all as specified and as directed by Engr - In - Charge. |
| 174 | Supply and laying 25 mm GI pipe fitting tubes medium grade galvanished with all fittings complete laid in trenches including taking down the old unserviceable GI pipe from trenches Complete all as specified and as directed by Engr-In-Charge. |
| 175 | Supply and laying 20 mm GI pipe fitting tubes medium grade galvanished with all fittings complete laid in trenches including taking down the old unserviceable GI pipe from trenches Complete all as specified and as directed by Engr-In-Charge. |
| 176 | S & F of float valvesof size 20 mm and as reqired at site as complete brass fitting with rod and plastic ball Complete all as specified and as directed by Engr-in-in Charge. |
| 177 | S & F gun metal gate valvewith inner wheel head, screwed both ends in iron pipe and fixed of Size 20 mmComplete all as specifed and as directed by Engr-In-Charge. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
