|
| 1 | Taking down Chowkhats or frame exc 1.5 Sqm but n.exe 4 Sqm each without taking off shutters from the framecomplete all as specified and as directed. |
| 2 | Taking down shutters of any description exc 1 Sqm and n.exc 2.00Sqm each and removing from sitecomplete all as specified and as directed. |
| 3 | S&F of pressed steel framed for door with one or more rebates including necessary fixing lugs, hinges, lockstrike plates, size of frame 125 X 60 mm, 1.25mm thickcomplete all as specified and as directed. |
| 4 | S&F of factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19x19mm MS square tube and 1.2mm wall thickness complete all as specified and as directed. |
| 5 | M&L for 2nd class hard wood for plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, in pieces for replacing one leg or certain portion of decayed portion without taking down chowkhat or frame by cutting existing length/portion complete including making good disturbed opening by rich mortar in CM 1:4 all as specified and as directed. |
| 6 | S&F of 35mm thick 2nd class hard wood factory made, plain, framed, paneled shutter (two panel) with lock rails and panel of 9mm BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 Part-I kiln seasoned and chemically pressure treated. complete all as specified and directed. |
| 7 | S&F for factory made 35mm thick 2nd class hard wood gauged and skeleton shutter open rebated and prepared to received gauge etc (without sash bars) for fly proof door shutter, edges of framing plain, chamfered or rounded, fitted with cut of any mitred beads for securing gauge etc, size of members of shutter as specified in SSR Part-I section 8 clause No.8.23(a) and fitted to chowkhats complete all as specified and as directed. |
| 8 | S&F of factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails MS frame shall be covered with heat moulded plain clolur PVC `C\" channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stile and plain color PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying & fixing in the frame at site as per manufactures instruction, specification. complete all as specified and directed. |
| 9 | Easing of door shutters for properly closing/opening, fighting of hinges or changing the position of hinges, adjustment of tower bolts sliding bolt but exc. 1.00 Sqm not exc 2.00 sqm etc complete all as specified. |
| 10 | Refixing of shutter exc 1 Sqm but n. exc 2 Sqm after necessary repairs in the same opening all as specified and as directed. |
| 11 | Taking down shutters with wooden frame of cupboard of any description exc 1 Sqm and n.exc 2.00Sqm each and removing from site. complete all as specified and directed. |
| 12 | M&L for 18/19 mm thick Prelaminated particle board, interior grade,prelaminated bothside with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work complete all as specified and directed. |
| 13 | S & F Continuous (piano) hinges,mild steel, bright finish or electrogalvanised complete all as specified and directed. |
| 14 | S&F of mild steel butt hinges, medium weight cold rolled of size 100mm complete all as specified and as directed. |
| 15 | Taking down old/ rusted verandah net/jali including frame of any description etc complete all as specified and directed. |
| 16 | Dismantling wrought iron or mild steel work of any description not otherwise provided forcomplete all as specified and as directed. |
| 17 | S&F rolled mild steel equal angles framed work confirming of Fe-290 (Gde-E-165)includingwelding, drilling for holes as necessary for fixing door frame, verandah jali, mesh and staple etc complete all as specified and directed. |
| 18 | S&FMS flat iron as in support for veranda jali,mesh including welding,drilling holes and fixed to frame with nuts red sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc confirming to Fe-290(Gde-E-165) etc complete all as specified and directed. |
| 19 | S&F aluminium handles cast type anodised 150mm of size. complete all as specified and directed. |
| 20 | S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 21 | S&F Aluminium alloy anodised sliding door bolt 250 mm long with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and directed. |
| 22 | S&F for factory made pressed steel windows of standard size and section as shown on HQ CE Siliguri Zone Drg No CESZ/2018/TD-07, Sheet 1/3 to 3/3 with glazing bars including all fittings like MS hold fast, box hinges, handles, MS tower bolts, stoppers, hinges, MS stay with long screw, MS spring latch, MS guard bar/ grill etc complete with glazing bars including one shop coat zinc prime complete all as specified and as directed.Notes:-(a) Rate quoted shall be deemed to be included of all fittings and fixtures.(b) Glass, wire mesh and painting shall be measured and paid separately under relevant items of Sch. |
| 23 | All asper item No. 22 above but without glazing bars complete all as directed. |
| 24 | All as item No 22above but fixed type complete all as specified and directed. |
| 25 | S&F in repair steel ventilator top hung shutter including hinges, steel peg stay, fixing lugs etccomplete with or without glazing bars as shown on HQ CE Siliguri Zone Drg No CESZ/2018/TD-07, Sheet 1/3 to 3/3 all as specified and as directed by Engr-in-Charge. complete all as specified and directed. |
| 26 | M&L for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings;framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 27 | M&L for preparation of new or previously untreated steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 28 | M&L for preparation of new or previously undecorated wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of Pink primer complete all as specified and as directed. |
| 29 | Hacking out old broken unserviceable glass panes (any thickness, size, quality or description) for metal frame including punching or drilling out old glazing pins/spring clips and providing & fixing new one. complete all as specified and directed. |
| 30 | S&F of 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as directed. |
| 31 | M&L for PCCtype C-1, 1:3:6 using 20mm graded aggregate as in bed block for fixing of hold fast, filling concrete inframe filling , gaps in between glazed & fly proof steel window, cills, railing up to 60 cm in height etc including necessary form work as required all complete. |
| 32 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed. |
| 33 | S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed. |
| 34 | Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed. |
| 35 | M&L for brick work with fly ash bricksstraight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 36 | Taking down cement plaster on wall of any description incl racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 37 | M&L for 15mm thick rendering in cement mortar (1:4) on fair faces ofbrick walls or concrete surfaces inmixed with water proofing compoundby weight of cement or as per manufacturer instructions, finished even & fair without using extra cement all complete as specified and asdirected |
| 38 | M&L for rendering 5 mm thick cement plaster on ceiling cement mortar(1:3) finished even & fair complete all as specified and as directed. |
| 39 | M&L for rendering 15 mm thick cement plaster on other than fair surfaces of brick work in cement mortar(1:6) finished even & fair complete all as specified and as directed. |
| 40 | Supply onlyintegral water proofing compoundcomplete all as specified and directed. |
| 41 | M&L forpreparation of newly wallplastered surfaces and applying three coats of white wash on wallto match the existing colour as specified as directed. |
| 42 | M&L forpreparation of newly ceiling plastered surfaces and applying three coats of white wash on wall as specified as directed. |
| 43 | M&Lfor preparation of newly plastered surfaces of wall by vacuum based sanding machine, applying wall care putty (multipurpose mixture shall be used for uniform and proper mixing of putty) and applyingtwo coat of exterior acrylic emulsionpaint on external surface of wall/Chajja/facials by auto rollerover a coat of primer complete all as specified and directed as per manufacturers instruction complete all as specified and as directed. |
| 44 | M&Lfor complete removal ofexisting treatment from olddecorated plastered surfaces of wall by vacuum based sanding machine removal of nails etc & filling crack/holes with putty, applying wall care putty as required (multipurpose mixture shall be used for uniform and proper mixing of putty) and applyingtwo coat of exterior acrylic emulsionpaint on external surface of wall/chajja/facias by auto roller over a coat of primer complete all as specified and directed as per manufacturers instruction complete all as specified and as directed. |
| 45 | M&Lfor preparation new internal wall surfaces with one coat wall putty and applying two coats of distemper oil emulsion complete all as specified and directed. |
| 46 | M&L for one coat ofdistemper oil emulsion on of old surface of wallinclude brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots complete all as specified and directed. |
| 47 | M&L for one coat ofwhite wash on ceiling of old surface with preparation of old surface shall include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots complete all as specified and directed. |
| 48 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises including taking downcement plaster. |
| 49 | M&L for Granite (of any type) tiles20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishingcomplete all as specified and directed. |
| 50 | M&L for15mm thick screed bed or bedding layer ofcement mortar 1:6 for floor finishes complete all as specified and as directed. |
| 51 | M&L non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.complete all as specified and directed. |
| 52 | M&L Glazed ceramic coloured tiles in vertical surface 350x250x7/450x350x7mm thick set and jointed in neat cement slurry and pointed white or colour cement to match as specified as directed. |
| 53 | M&L non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.complete all as specified and directed. |
| 54 | M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces to receive a wall tiles using cement mortar 1:4as specified as directed. |
| 55 | Demolition of cement concrete (un-reinforced ) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) all as specified and as directed. |
| 56 | Material and labour for 75mm thick PCC (1:3:6),type C-2 (using 40 mm graded crushed stone aggregate ) as in plinth protection; etc laid in bays / panels not exc. 2.00 Sqm eachincluding construction joints at suitable interval and each corner and filled with bituminous mastic filling (1 part bitumen & 3 part sand) and finished the surface even and smoothwithout using extra cement complete all as specified. |
| 57 | Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 15 mm borecomplete all as specified and directed. |
| 58 | S&F of Tubes, medium grade, 15mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floorscomplete all as specified and directed. |
| 59 | Refixing of old steel tubing and connections in new or old position (wall, ceiling, floors, etc) of 15 mm bore complete all as specified and directed. |
| 60 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth in brick walls complete all as specified and directed. |
| 61 | Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 20 mm borecomplete all as specified and directed. |
| 62 | S&F of Tubes, medium grade, 20 mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified and directed. |
| 63 | Dismantling water tank exc 500 & n.exc 1000 ltr capacityand removing to store all as specified as directed |
| 64 | S&F 500 ltrs capacity rotational moulded polyethylene water storage(cylindrical vertical with closed top) hoisted and fixed in positions all specified in SSR Part I complete all as specified and directed. |
| 65 | S&F in repair of ball valves of 20mm bore high pressure of PTMT with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe & fixed (Minimum weight 20 gms-210 gms) complete all as specified and directed. |
| 66 | S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm sizeincluding CP waste coupling, PVC connection 450 mm long, waste pipe & removing the existing Basin, cutting for and pinning ends of brackets or erecting stand. complete all as specified and directed. |
| 67 | S&F in repair stainless steel kitchen plate rack of size 31\"\" x 30\"\" x 10\"\" deep , fabricated with 0.63mm sheet fixed in position on wall complete. |
| 68 | S&F vitreous chinasquatting pan \"Orissa\" pattern size 580x440mm white with integral foot rests(excluding flushing cistern and flush pipe) with \"P\" or \"S\" trap front or back inlet etc including connection to trap and flushing pipe and provision of cement concrete bedding complete all as specified and as directed in repairs including demolition of existing one complete all as specified and directed. |
| 69 | S&F in repair 10 ltr capacity PVC flushing cistern low level white colour incl PVC connection 450 mm long, PVC flush pipe of reqd length etc complete all as specified and directed |
| 70 | S&F in repairEWC Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed. |
| 71 | S&F in repair 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cementcomplete all as specified and directed. |
| 72 | Taking down PVC pipe incl fittings and S&F 110mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall. complete all as specified and directed. |
| 73 | S & F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls. |
| 74 | S&F 110mm dia PVC SWR bends of any radius with out access door complete all as specified and as directed |
| 75 | S&F 110mm dia PVC (SWR) junction single \"T\" equal or unequal with access door Complete all as specified and as directed. |
| 76 | S&F 110mm dia PVC (SWR) branch piece, single ‘Y‘ equal or unequal Complete all as specified and as directed. |
| 77 | Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 78 | M&L RCC type B1 (1:2:4) using 20 mm graded aggregate in Fins, fascias, louvers, parapets, and railings , newels, balustrade & the like complete all as specified and directed. |
| 79 | Formwork to fins, louvers, fascia. etc Fair finished surfaces of concrete flat complete all as specified and directed. |
| 80 | M&L Mild steel TMT bars 6mm to 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed. |
| 81 | Taking down tarfelt with cement plaster from roof surfaces and lowering and removing the same toa distance exc. 50m and n. exc.100m incl roughening ofold concrete surface of roofby wire brushing and cleaning the surface to remove all loose dust etc complete all as specified and as directed . |
| 82 | M&L for 10mm thick screed bed or bedding layers in cement mortar (1:4) in order to maintain proper slope over existing roof surfaces for laying APP base polymeric membrane, finished even and smooth without using extra cement complete all as specified and as directed. |
| 83 | M&L for water proofing treatment to RCC roof slab, includingparapet comprising with the following courses of treatment/specification from bottom to top :-(a) Applying bituminous primer @ 0.4 ltrs per Sqmover plastered surfaces of roof incl parapet surface.(Note :-Bituminous primer shall be \"TANK MASTIC\" manufactured by \"EMUFALTE\" manufactured by M/s Texas India Ltd. or techno commercially equivalent as approved) (b)Over the priming coat laying one layer APP based polymeric membrane of approved manufacturer 3 mm thickweightnot less than 3.6 Kgs per Sqm reinforced with non woven polyester fabric weight not less than 150 gms per Sqm. Polymeric membrane shall be taken to a heightof 60cm (min) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. (Note:- (i) Laying APP based polymeric membrane shall bedonetorch on method or as per manufacturer\"s instructions.(ii)A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturer\"s instruction.(iii)APP based polymeric membrane shall be\"MOPLY FP 3MM\" manufactured by M/S Texas India Limited or techno commercially equivalent as approved (iv) Applying two coats of Aluminium paint over APP membrane.) (V) Cutting groove in brick wall 75 mm wide and 65 mm deep and shopping horizontal face of groove with cement mortar 1:3 |
| 84 | S&F Powder coatedaluminum window sliding type three track (2 glazed & one gauze shutter ) aluminum sections weighing not less than 1.25kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazingcleats, rubber packing , screws, handle, locking arrangement and 5.5mm thick plain/tinted glass and aluminum mosquito proof gauge width of aperture 1.40mm including taking down of old existingwindow of any description and making good disturbed surface of wall complete all as specified and as directed. |
| 85 | S&F Powder coated aluminum louvered ventilators of size n exc 0.50 Sqm area with glass louvers, without sash bars of aluminum sections weighing not less than 0.605kg/m for frame of size 40x20x2mm including necessary jointing cleats, glazingcleats, rubber packing , anodised aluminium snap beading,screws, anodised aluminium fittings and 5.5mm thick tinted glass fixed in panels with suitable locking arrangementsincluding taking down of old existing old ventilator of any description and making good disturbed surface of wall complete all as specified and as directed. |
| 86 | S&F powder coated anodized aluminum door made out hollow extruded aluminum sections as mentioned below. Each door having 02 No disk or D type handles of 200mm long 02 No aluminium tower bolt of 20mm size, 1 No mortice lock of six levers with key in duplicate regulated by double action hydraulic floor door spring (Make- Sandhu/Titz) shutter to be partly glazed with 5mm thick tinned glass and partly paneled with 12mm thick prelaminated particle board fixed with glazing clips rubber bedding/gasket anodized aluminum beading screws complete including taking down old unserviceable shutter with frame. (a) Chowkhat frame : 100 x 44 x 1.60mm (b) Shutter vertical: 100 x 44 x 1.60mm(c) Shutter lock rail : 150 x 44 x 1.60mm (d) Shutter top rail: 100 x 44 x 1.60mm (e) Shutter bottom rail : 200 x 44 x 1.60mm |
| 87 | Demolition of wall and ceiling board (Fiber, pulp, insulation etc) or insulation board / slab/ plankets any thickness including cover fillets complete all as specified. |
| 88 | S&F false ceiling with GI powder coated frame work and 4mm thick (E-board) none asbestos fibre reinforced cement board, reinforced design board tiles confirming to IS- 14862 of approved texture at all height duly suspended ceiling laid on hot dip galvanised iron imposed grid of size 600 x 600mm, T section/ Angle section including cutting holes in brick wall and making good surface with cement concrete 1:2:4 type B-0, 1:3 cement mortar complete all as specified and directed. (a) 27mm x 27mm angle 0.55mm thickness GI powder coated hot dip galvanised plugged at the rate 600mm c to c along with to perimeter of wall.(b) 25mm x 25mm \"T\" 0.55mm thickness GI powder coated hot diped galvanised as main and cross runner suspended with 1.6mm dia GI wire suspended (Not exc 1.2 mtr length) with adjustable clamps and dash true fasteners plugged in RCC slab or angle iron runner of stopped roof placed at the rate 600mm c to c along with the perimeter of wall. Note : The work shall be carried out as per manufacturer instruction and as directed. |
| 89 | S&F for solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing complete all as specification and directed. |
| 90 | S&F for 5mm thick PVC sheet fillet of width 35mm fro wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed. |
| 91 | S&F of 52mm thick PVC partition consisting of 12mm thick plain solid PVC ply sheet reinforced with frame work made from 40mm x 20mm MS tubes in between two MS tubes, 5mm thick plain heat moulded \"C\" channel of size 75mm x 50mm with feathered edge shall be fixed on the floor, wall and ceiling plastic ply Opanel shall be inserted in the PVC \"C\" channel. The first and last MS tubes should be erected such that it is inside a PVC \"C\" channel. in between adjoining plastic panel 5mm thick x 75mm width plain PVC sheet feathered at edges shall be stick on the front and back face using solvent cement complete all as specified and directed. |
| 92 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 93 | S&F of rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantry, rails, fastening, heavy bracket framing (Beam, tee, angle, channel or flat section , etc), including distance pieces, cleats etc. confirming to Fe - 410- W including cutting, welding & necessary fittings such as nut bolt, plate etc. complete all as specified and directed. |
| 94 | Dismantling of Plain or profile steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings . |
| 95 | S&F Pre- painted galvatume aluminum zinc coating GI based profile steel sheet 0.50mm thick ofcolour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 96 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof , to wall, ridges fixed with self tapping screws as specified. |
| 97 | Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit includingremovalof batten/ conduit/ gutties/ wooden boards/ switches/ sockets/ regulators/ light fittings etc and separating the serviceable items like fan regulators and light fittings for re-use under respective items and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified and as directed. |
| 98 | Taking down carefully existing old/unsv sub main wiring of any size/description as existing at the sit including making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified and as directed. |
| 99 | M&L for concealed conduit point wiring with 1.5 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core copper cable working voltage 1100 volts grade conforming to IS-694 with stranded copper conductor in and including PVC conduit of adequate size with allaccessories (including cutting chases & making good the disturbed surface to its original specification) including MS sunk box, 3mm thick hylam sheet top cover fixed by means of brass machine screw and cap washer including size 1.5 sq mm (nominal cross sectional area) PVC insulated unsheathed single core multistranded copper conductor cable as earth continuity conductor connected to main switches/DB\"s or common earth dolly complete all as specified and directed for one Light point controlled by one, one way switch |
| 100 | All as per item No 99 here in before butfor one Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator |
| 101 | All as per item No 99 here in before but for one 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 102 | All as per item No 99 here in before butfor one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board. |
| 103 | All as per item No 99 here in before but for one bell point controlled by one, bell switch 5 Amps |
| 104 | All as per item No 99 here in before but for one light point controlled by one, two way switch 5 Amps |
| 105 | All as per item No 99 here in before butusing 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point incl running of2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly. |
| 106 | S&F of switch piano flush type 5/6 amps single pole one way complete all as specified and as directed. |
| 107 | S & F bell push flush type 5 amps, 230 volts.complete all as specified and directed. |
| 108 | S & F switch piano single pole flush type, two way, 5 amps, 230 volts complete all as specified and as directed. |
| 109 | S&F socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and as directed. |
| 110 | S&F switch socket combination 2 in 1, 6 pin 5/6 amps and 15/16 amps multipurpose, white/ivory finish flush non shutter non inter locking type with and including taking down existing unserviceable, complete all as specified and as directed. |
| 111 | S&F of Switch socket combination2 and 3 Pin, 5/6 amps, multipurpose flush non shutter, non inter locking type white ivory finish with and including taking down existing unserviceable, complete all as specified and as directed. |
| 112 | S&F ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and as directed. |
| 113 | S & Flamp holder, insulated body, with back plate suitable for batten/anglefittings complete all as specified and as directed. |
| 114 | S & F deluxe fan Electronic regulator 120/280 volts AC 50 Hzs rotary stepwhite/ivory finish complete all as specified and as directed. |
| 115 | S&F in repair modular switch 1 way,6Amp complete all as specified and as directed. |
| 116 | S&F in repair modular switch 1 way,16Amp complete all as specified and as directed. |
| 117 | S&F in repair modular socket outlet 6 Amp 2/3 pin complete all as specified and as directed by Engr-in-Charge. |
| 118 | S&F in repair modular socket outlet 6/16 Amp,2/3 pin complete all as specified and as directed by Engr-in-Charge. |
| 119 | S&F White cover plate with frame ,2 module |
| 120 | S&F in repairhylam sheet 3 mm thick white in colour of size 120 mm x 120 mm including taking down existing unserviceable. |
| 121 | S&F in repair hylam sheet 3 mm thick white in colour of size 120 mm x 170 mm including taking down existing unserviceable. |
| 122 | S&F in repair hylam sheet 3 mm thick white in colour of size 200 mm x 100 mm including taking down existing unserviceable. |
| 123 | S&F in repair hylam sheet 3 mm thick white in colour round type of size 80 mm dia including taking down existing unserviceable. |
| 124 | S&F IP 20, class I, LED light 1X18 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified and as directed. |
| 125 | M&L for Energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 66 Security light fitting luminaire with high power LEDs as light source and driver of capacity 25 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor cable from ceiling rose to fitting and GI Pipe bracket made out of GI pipe medium grade 1.2 Mtr long 32 mm dia , MS clamp, nut, bolt and washers complete all as specified and directed by Engineer-in-charge. |
| 126 | S&F IP 20, Class I, LED Mirror light fitting 1 x 10 W, (or nearest next higher wattage) 5700 K, wall /Surface mounted with aluminium housing 2 feet long, integrated type, with high efficiency PMMA diffuser,integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/square blocks, screws etc complete including 01 No 10 W LED lamp with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size including necessary taking down the old unserviceable fitting complete all as specified and as directed. |
| 127 | S & Fin replacement recess mounting flat panel 36 Watt LED fitting (2\"X2\") for Armstrong/ grid ceiling, white powder coated CRCA housing complete with full window acrylic diffuser & electronic driver, high brightness SMD LEDs etc complete with all accessories internally prewired and necessary mounting arrangements, including necessary connection ,complete all as directed. |
| 128 | S & F in replacement Post top lanterns 20 watt LED light fitting ,new generation, energy saving, environmental friendly, long life with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source, spun aluminium canopy, with opal/clear acrylic diffuser and complete with all accessories internally prewired including connecting up with three core twisted flexible copper conductor cable up to ceiling rose and necessary mounting arrangements, complete all as directed. |
| 129 | Supply and fixing in replacement Inverter LED batten 20W with square profile and polycarbonate channel, lithium Ion battery with charging time 8 Hours-10 Hours and backup time upto 4 Hours with driver, holder including LED tube light connecting up with three core flexible copper conductorcable of suitable size from ceiling rose complete all as specified and as directed. |
| 130 | S & F in replacementround shape LED recess light 6 Watt fitting for armstrong/ grid ceiling, white powder coated CRCA housing complete with full window acrylic diffuser & electronic driver, high brightness SMD LEDs etc complete with all accessories internally prewired and necessary mounting arrangements, including necessary connection ,complete all as directed. |
| 131 | S & F in replacementround shape LED Surface light 12 Watt fitting for armstrong/ grid ceiling, white powder coated CRCA housing complete with full window acrylic diffuser & electronic driver, high brightness SMD LEDs etc complete with all accessories internally prewired and necessary mounting arrangements, including necessary connection ,complete all as directed. |
| 132 | S & F in replacement Decorative wall light fixture made up of polycarbonate, suitable for 20 W fitting complete with all accessories internally prewired and necessary mounting arrangement including necessary connection ,complete all as directed. |
| 133 | M&L for sub main wiring with 2 run of 6.00 sqmm (nominal cross-sectional area) PVC insulated unsheathed single core FRLS cable of working voltage 1100 volts gradewith stranded copper conductor includingone run of 6.00 Sqmm (nominal cross sectional area) PVC insulated unsheathed cable with stranded copper conductor as continuous earth wire connected to common earth dolly drawn in PVC rigid non- metallic conduit with and including taking down unsv sub main taking down the existing unserviceable sub main wiring of any type / description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified. complete all as specified and as directed. (NOTE :Two runs of sub main wiring cable along with one run of earth wire with and including 25mm diaPVC conduit pipe shall be measured as one unit length). |
| 134 | All as per item No 133 above but usingtwo run 4.0 Sqmm multistranded copper conductor single core cable with one run 4.00 sqmm multistranded copper conductor single core cable as earth wire complete all as specified and as directed. |
| 135 | Supply and fixed in repairs MCB TPN 40 to 100 Amps,\"C\" series 10kA, 415 Volts and to be housed in DBscomplete including necessary connectionall as specified and as directed. |
| 136 | S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, Triple pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB\"S/lsolators complete with and including taking down old unsv one all as specified and directed incl taking down the existing unserviceable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified and as directed. |
| 137 | S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB\"S/lsolators complete with and including taking down old unsv one all as specified and directed incl taking down the existing unserviceable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified and as directed. |
| 138 | S&F in repair MCB, Single pole & neutral, 32 amps, 240 volts, ‘C’ curve, 10KA allcomplete with and including taking down old unsv one as specified and as directed. |
| 139 | S&F MCB, Single pole, 6 to32 amps, 240 volts, ‘C’ curve, 10 KAall complete with and including taking down old unsv one as specified and as directed. |
| 140 | M&L for Earthing complete with galvanised steel earth plate electrode 600x600x6.0 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below the ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth strip 32x6mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or of steel all as shown in electrical plateof SSR part-I2009 connected to down Conductor all as specified and testing on completion including taking down unsv one necessary excavation, earthwork, PCC works and CI earth pit cover with watering pipe 20mm dia GI pipe medium grade, funnel with wire mesh and lugs and GI pipe 40 mm dia of light grade,for protection of earth stripand testing after completion complete all as specified and directed. Note: Excavation/PCC/Earth work/Charcoal/ Salt shall be deemed to be include in this unit rate. |
