|
| 1 | SUPPLY & INSTALLATION OF CHILDREN PLAY EQUIPMENTS UNDER MPLADS FUNDS OF PARLIAMENTARY CONSTITUENCIES – SOUTH DELHI, WEST DELHI & NORTH WEST, NEW DELHI FOR DIFFERENT LOCATIONS OF PARKS IN MUNICIPAL CORPORATION OF DELHI. |
| 2 | ARCH SWING. LEG SUPPORT: 80 MM NB PIPE, SEAT- ANTI SKID RUBBER BELT. BEARING : HEAVY DUTY BALL BEARING. AREA : 3.0 M X 2.5 M. HEIGHT : 2.5 M. TOP BAR : 60 MM NB PIPE. SUSPENSION : 6 MM RUBBER COATED CHAIN. THE TOPCOAT IS DULY POWDER COATED. In This One Child Can Enjoy The Swing At One Time. The Arch Shaped Side Frame Shall Be Made Of 80mm NB B Class GI Pipe Shall Be Made Up Of 50mm NB B Class GI Pipe. The Frame Shall Be Powder Coated To Give An Aesthetic Look. The Swing Shall Be Made Up Of 10mm Thick Anti Skid Rubber Top The Rubber Belt Seat / U Shape Swing Seat With 2 Eye Bolt TYB-S06. made of Polyurethane of size：53 X 20.5 X 20 Shall Be Suspended On 6mm Rubber Coated GI Chairn. The Bail Bearings Shall Be Mounted Inside A Specially Designed Nylon Clamp. Coating With Pure Polymer Powder With 7 Tank Treatment 60 To 70 Micron Thickness.The Holding Down/Fixing OfEquipments Shall Be Emboded In Cement Concrete In The Ratio Of 1:2:4 (1cement : 2 Coarse Sand :4 Stone Agg. 20mm Nominal Size) |
| 3 | STRAIGHT NET CLIMBER. AREA : 0.5 M X 1.7 M. HEIGHT : 2.1 M.The Main Frame Of Straight Net Climber Shall Consist Of 40 Mm NB B Class GI Pipe. -The Joint Balls Shall Be Made From LLDPE (Low Linear Density Polyethylene) /PPMaterial With Group Screws Provision For Rope Holding. -O Hooks Of The Frame Having 50mm Bending Dia And Rod Dia 8mm. -The Loop Shall Be Given To Through O HooksTo Get A Grip While Climbing. -Rope Used Of PP Nylon Mix Type Having 22 Mm Diameter. Coating With Pure Polymer Powder With 7 Tank Treatment 60 To 70 Micron Thickness.The Holding Down/Fixing OfEquipments Shall Be Emboded In Cement Concrete In The Ratio Of 1:2:4 (1cement : 2 Coarse Sand :4 Stone Agg. 20mm Nominal Size) |
| 4 | STD. SEE SAWHANDLE :-20 MM N B PIPE. LEVER-32 MM N B PIPE. COLMUN : 60 MM N B PIPE. BEARING : NYLON BUSH PRESS FITTED. SEATS: FRP SEATS WITH STEEL FRAME. THE TOPCOAT IS DULY POWDER COATED. The Level Of See Saw Shall Be Made From 15, 20 And 25mm NB B Class GI Pipe. The Seat Of See Saw Shall Be Made From FRP/LLDPE. The Stand And Bush Bearing Made In 40mm NB B Class GI Pipe. See Saw Lever Shall Be Welded To 5mm Thickness MS Plate For Nut Bolting With Stand. All Pipes Flat Shall Be Powder Coated To Avoid Rusting. Coating With Pure Polymer Powder With 7 Tank Treatment 60 To 70 Micron Thickness.The Holding Down/Fixing OfEquipments Shall Be Emboded In Cement Concrete In The Ratio Of 1:2:4 (1cement : 2 Coarse Sand :4 Stone Agg. 20mm Nominal Size)C37C40C41C39 |
| 5 | SPIRAL SLIDE.LADDER-FRAME- 25M M N B PIPE. HANDRAIL - 20 MM N B PIPE. CENTRE SUPPORT- 50 MMN B PIPE. AREA : 2.5 M X3.5 M.PLATFORM HEIGHT : 2.1 M. CHUTEF R P THE TOPCOAT IS DONE USING THE BEST QUALITY BRAND OR DULY POWDER COATED. Spiral Slide Shall Be Chute Made Of FRP (Fiber Reinforced Plastic / LLDPE (Low Linear Density Poly Ethyline) Having Thickness Of 4mm Slide Center Support Shall Be 80mm NB B Lass GI Pipe. Landing Module Shall Be Supported By 20mm NB B Class GI Pipe. Slide Extension Platform Shall Be Made From FRP / LLDPE. The Railing Shall Be Made From 15mm NB And 20nn NB B Class GI Pipe. All Pipes Shall Be Coated With Pure Polymer Powder With 7 Tank Treatment 60 To 70 Micron Thickness.The Holding Down/Fixing OfEquipments Shall Be Emboded In Cement Concrete In The Ratio Of 1:2:4 (1cement : 2 Coarse Sand :4 Stone Agg. 20mm Nominal Size) |
| 6 | SUPPLY AND FIXING OF CROSS &ZEROAREA :0.6 M X 0.6 M. HEIGHT : 1.00 M.TRIANGULAR CROSS AND ZEROS ARE MADE FROM LLDP/PP MATERIAL WHICH HAVING IN BUILT CROSS AND ZEROS EMBOSSED. -THE SUPPORT FRAME IS MADE UP FROM 25MM NB MEDIUM CLASS G.I. PIPE. THERE SHALL BE TWO SEATS PROVIDEDWHICH SHALL BE MADE OUT OF MOULDEDPLASTIC IN ROTO MOLDING PROCESS. COATING WITH PURE POLYMER POWDER WITH 7 TANK TREATMENT 60 TO 70 MICRON THICKNESS.THE HOLDING DOWN/FIXING OFEQUIPMENTS SHALL BE EMBODED IN CEMENT CONCRETE IN THE RATIO OF 1:2:4 (1CEMENT : 2 COARSE SAND :4 STONE AGG. 20MM NOMINAL SIZE) (AS PER DIRECTION OF OFFICER IN CHARGE.) |
| 7 | SUPPLY AND FIXING OF ZIG ZAG BALANCE BEAM:LENGTH 4M X WIDTH 101.6 MM X HEIGHT 457.2 MM NB \"B\" CLASS G.I. PIPES. THE HOLDING DOWN/FIXING OFEQUIPMENTS SHALL BE EMBODED IN CEMENT CONCRETE IN THE RATIO OF 1:2:4 (1CEMENT : 2 COARSE SAND :4 STONE AGG. 20MM NOMINAL SIZE (AS PER DIRECTION OF OFFICER IN CHARGE.) |
| 8 | ANIMAL MERRY GO ROUND.AREA : Ø 1.5 M. HEIGHT – 0.8 M. SEAT – ROTO MOULDED PVC ANIMAL SHAPE.MAIN FRAME: 40NB G.I.PIPE. BEARING: HEAVI DUTY BEARING.MS PLATE: 250X10MM. SUPPORT PIPE- 80NB. THE TOPCOAT IS DULY POWDER COATED. The Main Frame Of The Animal Merry Go Round Shall Be Made Up Of 25 & 40 NB B Class GI Pipes. The Stand Shall Be Made In 80 NB B Class GI Pipe. The Whole Structure Shall Be Mounted On Heavy Duty Bearing Shaft Permanently Lubricated With Water Sealant. The Animal Shall Be Made Out Of FRP (Fibre Reinforced Plastic)/LLDPE (Low Linear Density Poly Ethylene). It Shall Accommodate 4 Children At A Time. The Pipes Shall Be Powder Coated To Prevent Rusting. Coating With Pure Polymer Powder With 7 Tank Treatment 60 To 70 Micron Thickness.The Holding Down/Fixing OfEquipments Shall Be Emboded In Cement Concrete In The Ratio Of 1:2:4 (1cement : 2 Coarse Sand :4 Stone Agg. 20mm Nominal Size) |
| 9 | SUPPLY AND FIXING OF TODDLER SWING.THE AREA :- 2.8M X 1.0M . IN THIS TODDLER SWING THE CENTER SUPPORT SHALL BE MADE UP OF 80 MM NB B CLASS G.I. PIPE. THE HORIZONTAL BARS SHALL BE MADE UP OF 50 MM NB B CLASS G.I. PIPE. ALL GI PIPES SHALL BE POWDER COATED. BETWEEN THE TWO HORIZONTAL BARS THERE SHALL BE A HEAVY-DUTY METAL CLAMP ATTACHED TO IT. THE BUCKET SEATS OF THE TODDLER SWING SHALL BE MADE OF RUBBER WITH ANTI SKID. THE BALL BEARINGS SHALL BE MOUNTED INSIDE SPECIALLY DESIGNED NYLON BALLS. THE RUBBER SEAT SHALL BE AFFIXED ON 8 MM THICK GI CHAIN. THE SEATS SHALL BE MADE WITH FULL CARE SO THAT THE CHILD DOES NOT FALL FROM IT WHILE SWINGING. POWDER COATING WITH PURE POLYMER POWDER WITH 7 TANK TREATMENT 60 TO 70 MICRON THICKNESS.THE HOLDING DOWN/FIXING OFEQUIPMENTS SHALL BE EMBODED IN CEMENT CONCRETE IN THE RATIO OF 1:2:4 (1CEMENT : 2 COARSE SAND :4 STONE AGG. 20MM NOMINAL SIZE) (AS PER DIRECTION OF OFFICER IN CHARGE.) |
| 10 | SUPPLY AND FIXING OF FRP BOX SLIDE.LADDER-FRAME-25MM N B PIPE. HANDDRIL-20 MM N B PIPE. SUPPORT-40 MM N B PIPE. AREA : 4.8 M X 0.5 M. PLATFORM HEIGHT : 2.1M. CHUTE :4.0 MM THK F R P. CHUTELENGTH: 4 M. STEP-WIDTH-75MM. THREAD 90MM. RISER 250MM.THE MAIN FRAME OF2.1MTR HEIGHT PLAT-FORM HAVING PIPES ARE OF 40 MM NB B CLASS GI PIPE. THE BOX SLIDE IS OF MATERIAL FRP (FIBRE REINFORCED PLASTIC) WITH ATTRACTIVE BEAUTY COLOUR AND FLAT SURFACE AT END OF SLIDEFOR SAFE LANDING. THE REELING MADE FROM 20 MM NB B WHICH CAN BE USE LIKE HANDLE TO GET A GRIP WHILE START SLIDING. -THE STAIRCASE MADE FROM 25 MM NB B CLASS G.I. PIPE. COATING WITH PURE POLYMER POWDER WITH 7 TANK TREATMENT 60 TO 70 MICRON THICKNESS.THE HOLDING DOWN/FIXING OFEQUIPMENTS SHALL BE EMBODED IN CEMENT CONCRETE IN THE RATIO OF 1:2:4 (1CEMENT : 2 COARSE SAND :4 STONE AGG. 20MM NOMINAL SIZE) (AS PER DIRECTION OF OFFICER IN CHARGE.) |
| 11 | SUPPLY AND FIXING OF SIGN BOARDS OF 0.91 X 0.61M SIZE WITH SUPPORT LENGTH OF 3000 MM. MANUFACTURING, SUPPLYING AND FIXING OF RETRO REFLECTIVE SIGN BOARDS MADE OF 2 MM THICK ALUMINUM SHEET FACE TO BE FULLY COVERED WITH HIGH INTENSITY ENCAPSULATED TYPE HEAT ACTIVATED RETRO REFLECTIVE SHEETING CONFORMING TO TYPE – IV OF ASTM-D 4956-01 IN GREEN AND SILVER WHITE INCLUDING SUBJECT MATTER, MESSAGE (BILINGUAL(, SYMBOL AND BORDERS ETC AS PER IRC: 67-2001, PASTED ON SUBSTRATE BY AN ADHESIVE BACKING WHICH SHALL BE ACTIVATED BY APPLYING HEAT AND PRESSURE CONFORMING TO CLASS -2 OF ASTM-D-4956-01 AND FIXING THE SAME WITH SUITABLE SIZED ALUMINUM ALLOY RIVETS @ 20 CM C/C TO BACK SUPPORT FRAME OF M.S ANGLE IRON OF SIZE 35X35X5 MM AND M.S FLAT OF 25X5 MM ALONG WITH THEFT RESISTANT MEASURES, MOUNTED AND FIXED WITH 2 NOS. CLAMP OF MLS FLATS OF SIZE 25X5 MM TO A VERTICAL POST OF 3 MTR HEIGHT MADE UP OF MSL PIPE OF 60 MM N.B WELDED WITH TWO HOLD FAST OF M.S ANGLE 25X25X3MM OF 30CM LENGTH EACH AT BOTTOM AND INCLUDING MAKING HOLES IN PIPES, ANGLES, PROVIDING & FIXING M.S MESSAGE PLATE OF REQUIRED SIZE, STEEL WORK TO BE PAIRED WITH TWO OR MORE COATS OF SYNTHETIC ENAMEL PAINT OF REQUIRED SHADE AND OF APPROVED BRAND AND MANUFACTURE OVER A PRIMING COAT OF ZINC CHROMATE YELLOW PRIMER (VERTICAL POST TO BE PAINTED IN BLACK/WHITE/GREY COLOR) BACKSIDE OF ALUMINUM SHEET TO BE PAINTED WITH TWO OR MORE COATS OF EPOXY PAINT OVER AN APPROPRIATE PRIMING COAST INCLUDING ALL LEADS AND LIFTS ETC. COMPLETE AS PER DRAWING, SPECIFICATION (AS PER DIRECTION OF OFFICER IN CHARGE.) |
