|
| 1 | Providing and fixing wooden framework for stage base, using wooden planks or logs, spaced at 0.6 m intervals, including proper fixing and leveling, as per CPWD specifications for temporary wooden structures all complete as per the direction of Engineer-in-charge. |
| 2 | Providing and fixing 19 mm thick plywood sheets (710) securely nailed to the wooden framework, including cutting and fitting to required dimensions on hire basis all complete as per the direction of Engineer-in-charge. |
| 3 | Providing and fixing 12 mm thick plywood sheets (710) securely nailed to the wooden framework, including cutting and fitting to required dimensions on hire basis all complete as per the direction of Engineer-in-charge. |
| 4 | Providing and fixing precoated galvanised iron profile sheets (size, shape andpitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shallbe fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 5 | Providing and fixing tarpaulin sheets for roofing, including tying with ropes and proper fastening, as per CPWD specifications for temporary structures on hire basis all complete as per the direction of Engineer-in-charge. |
| 6 | Providing and fixing woodern ballies 80 mm dia in posts and struts for stageper the direction of Engineer-in-charge. |
| 7 | Providing and fixing clothes for ceiling, side wall pannelling (decorative type) over bamboo frame, including frill clothes (decorative type) at top and bottom of stage front and providing, placing floor carpet non-skid/ non-slippery type for main stageas per the direction of Engineer-in-charge. |
| 8 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 9 | Two or more coats on new work |
| 10 | Hiring charges for providing and installation of LED flood lights 250/300 Watts including service wire, switches,connections etc as required for the illumination of hocky ground area. |
| 11 | Hiring charges for providing and installation of LED decorative tunning lights/Jhalar lights sets including service wire, connections, control drivers etc as required for the illumination of hockey ground. |
| 12 | Hiring charges for providing and installation of LED colourful RGB tube lightincluding service wire, connections, switches etc as required for the illumination of hocky ground. |
| 13 | Hiring charges for providing and installation of stage LED focus lights 300 Watts includingwire, connections, control switches etc as required. |
| 14 | Hiring charges for providing and installation of stage RGB LED focus lights 250 watt on stage top includingwire, connections, control unit etc as required. |
| 15 | Hiring charges for providing and operation of PA system having amplifier 6000 watts-01 No, 3000 watt-01 No and 500watt-01 No with DMX control , crossover, mixer , sound box having Top-02 Nos, Base-02 Nos,Linear-02 Nos withcordless mic -02 nos, lead mic -02 nos etc as required. |
| 16 | Hiring charges for providing and installation of LEDtube light fitting 20 wattsincluding service wire, connections, switches, MCB etc as required forillumination to SHG/Deptt Stalls at hockey ground. |
| 17 | Hiring charges for providing and installation of power sockets 5/6 Amps includingwiring, connections, switches,MCB etc as requiredto SHG/Deptt Stalls at hockey ground. |
| 18 | Supplying of PVC insulated Al service wire 6.00 Sqmm, 2-core1100v or its equivalent. |
| 19 | Supplying of switch fuse unit,triple pole and neutral 100 Amps, 415 volts similar to Havells cat No: IHBRTE4100 or its equivalent. |
| 20 | Supplying of On load Changeover switch 4-pole ,415 V 100A,similar to Havells Cat No:IHBFFE0100 or equivalent. |
| 21 | Additional services charges beyond the original programme day |
