Tender For Construction Of Permanent Campus At Jnv Hojai Assam, Hojai-Assam

TDR : 52773518

Tender Notice
BOQ

14 Days Left

Hojai , Assam

Tender Brief : Tender For Construction Of Permanent Campus At Jnv Hojai Assam

Document Fees
₹ 10000 /-

EMD
₹ 8252880.0 /-

Tender Value
Refer document

Submission Date
19-12-2025

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	BUILDING PROPER
2	Carriage of excavated material up to 2 km including loading, unloading & stacking
3	Earthwork in excavation by mechanical means in foundation trenches (all kinds of soil)
4	Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m…..All kinds of soilPipes, cables etc, not exceeding 80 mm dia.
5	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, lift upto 1.5 m.
6	Supplying and filling in plinth with sand under floors, including watering, ramming,consolidating and dressing complete.
7	Pre-construction anti-termite treatment to top of plinth and wall-floor junction (complete as per IS 6313 Part II)
8	PCC 1:2:4 (1 Cement : 2 Coarse Sand : 4 Stone Aggregate 20 mm) in foundation & flooring
9	PCC 1:4:8 (M7.5) in foundations and plinth
10	PCC 1:2:4 in copings, sills, anchor blocks, etc.
11	40 mm thick DPC in 1:2:4 concrete
12	Extra for waterproofing admixture in concrete
13	Providing & applying a coat of residual petroleum bitumen of grade of VG-10 ofapproved quality using 1.7kg per square metre on damp proof course…
14	Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size) …..
15	PCC 1:2:4 coping over parapet wall (avg 75 mm × 230 mm)
16	RCC 1:1.5:3 (M20) in columns, beams, slabs, lintels, foundations, etc. excluding centering, shuttering
17	Centering and shuttering including strutting, propping etc. and removal of form for all heights: :Foundations, footings, bases of columns, etc. for mass concrete
18	Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
19	Columns, Pillars, Piers, Abutments, Posts and Struts
20	Extra for shuttering in circular work (20% of respective centering and shuttering items)
21	Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like
22	Edges of slabs and breaks in floors and wallsUnder 20 cms wide
23	Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick
24	Lintels, beams, plinth beams, girders, bressumers and cantilevers. with water proof ply 12 mm thick
25	Columns, Pillars, Piers, Abutments, Posts and Struts
26	Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like
27	Edges of slabs and breaks in floors and wallsUnder 20 cms wide
28	Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick
29	Reinforcement Fe-500D up to plinth level
30	Reinforcement Fe-500D above plinth level
31	Add for plaster drip/groove to RCC projections
32	Providing and fixing sheet covering over expansion joints with iron screws as per design Aluminium fluted strips 3.15 mm thick. 200 mm wide
33	RCC M25 (machine batched) up to & above plinth level, incl. pumping & admixtures
34	Design mix M-25 RCC above plinth to floor V level
35	Add for using extra cement in the items of design mix over and above the specifiedcement content therein.
36	Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. 1 M.S. tube
37	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)
38	Half brick masonry with common burnt clay F.P.S. (non modular) brick of classdesignation 7.5 in foundations and plinth in : cement mortar 1:4 (1 cement : 4 coarse sand)
39	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in
40	Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand)
41	Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every thirdcourse of half brick masonry.
42	Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clayF.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand).
43	18 mm marble (RNP/Udaipur/Black) slabs >0.5 sqm on 20 mm CM 1:4
44	Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded andprepolished, machine cut for kitchen platforms, vanity counters…a) Granite of any colour and shade Area of slab over 0.50 sqm
45	Providing edge moulding to 18 mm thick marble stone counters, Vanities etc.,including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.a) Marble work
46	Edge moulding & polish — granite
47	Extra for fixing marble/granite stone, over and above corresponding basic item …complete.
48	Extra for providing opening of required size & shape for wash basin/ kitchen sink inkitchen platform, vanity counter…
49	Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick fixed in urinal partitions … Engineer-in- charge.Granite Stone of approved shade
50	Providing wood work in frames of doors, windows, clerestory windows and other frames, wroght framed and fixed in position with hold fast….(hold fast lugs or dash fastener shall be paid for seperately)Second class teak wood
51	Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors…(Area of opening for glass panes excluding portioninside rebate shall be measured).
52	Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, ……25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S.Piano hinges IS : 3818 marked with necessary screws
53	Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type…35 mm thick including ISI marked Stainless Steel butt hinges with necessaryscrews.
54	Extra for providing lipping with 2nd class teak wood battens 25 mm ...(over all areaof door shutter to be measured).
55	Extra for cutting rebate in flush door shutters (Total area of the shutter to bemeasured).
56	Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of avg width…35mm thick shutters. Kiln seasoned and chemically treated hollock wood
57	Providing and fixing M.S. grills of required pattern in frames of windows etc…Fixed to steel windows by welding
58	Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows……..With 12 mm mild steel U beading
59	Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete :150 mm
60	Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete :90 mm
61	Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete.250 mm weighing not less than 150 gms
62	Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.75 mm
63	Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868)..250x16 mm
64	Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868)..300x16 mm
65	Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coatingnot less than grade AC 10 as per IS : 1868 ).a) 250x10 mm
66	b) 200x10 mm
67	c) 300x10 mm
68	d) 150x10 mm
69	Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :a) 125 mm
70	Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868)..Twin rubber stopper
71	Providing and fixing aluminium casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to requiredcolour and shade, with necessary screws etc. complete.
72	Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. 2nd class teak wood.50x50 mm (base and height)
73	Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss..1.5 mm thick
74	Providing and fixing cup board shutters with 25 mm thick veneered particle board IS: 3097 marked,…..With decorative veneering on one side and commercial veneering on other side
75	Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S……Using M.S. angles 40x40x6 mm for diagonal braces
76	Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length andIS: 4454 - part 1 andM.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover
77	Providing and fixing ball bearing for rolling shutters.
78	Extra for providing mechanical device chain and crank operation forExceeding 10.00 sqm and upto 16.80 sqm in the area
79	Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer-in- charge, (area of grill to bemeasured).
80	Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, etc....a) Fixing with 15x3 mm lugs 10 cm long embedded in c.c block 15x10x10 cm ofC.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
81	Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections….Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block15x10x10 cm of C.C. 1:3:6
82	Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections,…..Fixing with 15x3 mm lugs 10 cm long embedded in C.C block 15x10x10 cm of C.C.1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
83	Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc. including cutting, hoisting…(a). Electrical resistance or induction welded tubes
84	Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fanclamp, of internal dia 140 mm, 73 mm height..
85	Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing…In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
86	Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :4.0 mm thick glass panes
87	Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate)…40 mm thick with 20 mm nominal size stone aggregate
88	52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4... excluding the cost of nosing of steps etc.complete.
89	Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3coarse sand), finished with a floating coat of neat cement. 18mm thick
90	Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc.
91	Ordinary cement without any pigment
92	Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge…Raj Nagar plain
93	Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with …25 mm thick.
94	Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand)..
95	Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab.
96	Extra for Kota stone/ sand stone in treads of steps and risers using single length upto 1.05 metre.
97	Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622(thickness to be specified by the manufacturer)..
98	60 mm M30 interlocking paver blocks incl. 50 mm sand bed
99	Chequered PCC tiles 22 mm on 20 mm CM 1:4 (medium shade)
100	Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer)... skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand)…Size of Tile 600x600 mm
101	Chequered terrazzo tiles 22 mm (medium shade) on 20 mm CM 1:4
102	Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mmnominal size) over ..
103	Providing & fixing precoated galvanized (PPGL/Galvalume) profile roofing sheets 0.50 mm TCT fixed to purlins with self-drilling screws, including overlaps, cutting & wastage complete
104	Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Precoated GI gutters (approx. 600 mm girth) with joints & brackets complete (two eaves; ≈ 82 m)
105	Precoated GI barge boards, up to 300 mm girth (gable ends; ≈ 90 m)
106	Precoated GI ridge/valley 500 mm girth (single ridge ≈ 42 m)
107	uPVC (SN-4) rainwater pipes 160 mm dia, with specials & clamps (8 downpipes × ~7 m ≈ 56 m)
108	uPVC bends/shoes for 160 mm pipes
109	uPVC moulded fitting – Bend 87.5°, 110 mm
110	uPVC moulded fitting – Shoe (Plain) 110 mm
111	Providing & fixing uPVC pipe clips, with hardwood plugs & CM 1:4 making good – 110 mm
112	Cast iron grating for inlet mouth of rain water pipe, 15 cm dia, ≥440 g
113	12 mm thick cement plaster of mix 1:6 (1 cement:6 fine sand)
114	15 mm cement plaster 1:6 (rough side of wall)
115	12 mm cement plaster 1:6 (1 cement : 6 coarse sand)
116	15 mm cement plaster on rough side of single/half-brick wall 1:6
117	18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1cement : 5 coarse sand)……….
118	Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.20 mm cement plaster
119	6 mm cement plaster 1:3 (1 cement : 3 fine sand)
120	Providing and applying plaster of paris putty of 2 mm thickness over plasteredsurface to prepare the surface even and smooth complete.
121	White washing with lime to give an even shade: New work (three or more coats)
122	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including water thinnable priming..
123	Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including…
124	Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including primingcoat of exterior primer applied @ 2.20 kg/10 sqm)
125	Applying priming coat:a) With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
126	b) With ready mixed red oxide zinc chromate primer of approved brand andmanufacture on steel galvanised iron/ steel works
127	c) With ready mixed red oxide zinc chromate primer of approved brand andmanufacture onsteel works (second coat)
128	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work
129	Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
130	Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two or more coats on new work
131	Providing and applying white cement basedputty of average thickness 1mm ofapproved brand and manufacturer…
132	Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre…… even shade and colour.Two coats
133	Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC all complete as per direction of Engineer-in-Charge.
134	Providing and fixing chain-link fencing of required width, 4 mm dia wire mesh with MS angle posts embedded in cement concrete blocks
135	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections…For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
136	For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots..Anodised aluminium (anodised transparent or dyed to required shade according toIS: 1868, Minimum anodic coating of grade AC 15)
137	Providing and fixing glazing in aluminium door, window, ventilator shutters …With float glass panes of 5.50 mm thickness
138	Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, e etc.complete as per the direction of Engineer-in-charge.
139	Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather..Upto 5mm depth and 5 mm width
140	Providing and fixing 12 mm thick prelaminated particle board flat pressed three.. with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side
141	Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheetshould be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/ sqm).
142	Providing and laying integral cement based water proofing treatment including preparation of surface..(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645…(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5..(c) After two days of proper curing applying a second coat of cement slurry using2.75 kg/ sqm of cement admixed with…(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with…(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test…(a) With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
143	Providing and laying cinder filling in sunken floors and other locationswith approved quality cinder including watering and light ramming etc.required for proper compaction/completion of the work complete in all respects as per drawingsand as directed by the Engineer in Charge.
144	Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :150 mm
145	Providing and fixing aluminium door buffer of approved make, design and colour with necessary screws etc all complete as directed and specified by the Engineer-inCharge :
146	Roller blinds – black-out fabric
147	Providing and laying 1st quality ceramic glazed Anti skid floortiles of size 300x300 mm (thickness to be specified by the manufacturer) conforming to IS:15622 in all colours, shades, sizes as approved over 20 mm thick bed of Cement Mortar 1: 4 (1 cement : 4 Coarse Sand) including pointing the joints with white cement and matching pigment etc all complete in all respect as per specification/drawings andas directed and specified by the Engineer-in-Charge.
148	0.47 mm Galvalume sheet roofing incl. fasteners
149	G.I. frame work for suspended false ceiling
150	Providing and fixing false ceiling at all heights ….12 mm plain gypsum board ceiling incl. finishing
151	DEVELOPMENT WORKS
152	Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed — all kinds of soil
153	Banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden/steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m – all kinds of soil
154	Earth work in excavation by mechanical/manual means in foundation trenches/drains (≤1.5 m wide/10 sqm), incl. dressing, ramming; lift 1.5 m; lead 50 m — All kinds of soil
155	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m – Quantity of filling @ 35 %
156	Excavating, supplying and filling of local earth (including royalty) by mechanical transport up to a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete
157	Extra for every additional lift of 1.5 m in excavation/banking excavated or stacked material – All kinds of soil (1.5 m to 3.0 m).
158	Extra for every additional lift of 3.0 m to 3.5 m in excavation/banking excavated or stacked material.
159	Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
160	Earthwork in all kinds of soil up to 3.0 m depth
161	Earthwork in all kinds of soil up to 4.5 m depth
162	Earthwork in all kinds of soil (4.5–6.0 m)
163	Earthwork up to 4.5 m depth (other reach)
164	Earthwork 1.5 – 3.0 m (all kinds of soil)
165	Earthwork 1.5 – 3.0 m (ordinary rock)
166	Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/or good earth to be paid separately) – Quantity of filling @ 50 %
167	Earthwork in excavation (ordinary rock)
168	Excavating trenches for pipes/cables in all kinds of soil; pipes/cables exceeding 80 mm but not exceeding 300 mm dia
169	Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating, and dressing complete.
170	Supply of chemical emulsion for anti-termite treatment Anti-termite treatment (Chlorpyriphos/Lindane 20% EC @1% conc.)
171	Damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone III) : 4 graded stone aggregate 12.5 mm nominal size)
172	CC 1:2:4
173	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work up to plinth level (1:4:8 – 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
174	Providing and laying in position cement concrete 1:5:10 (1 cement : 5 coarse sand (zone-III) : 10 graded stone aggregate 40 mm nominal size) derived from natural sources, excluding centering and shuttering, all work up to plinth level
175	Extra for providing and mixing water-proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification
176	Providing and applying a coat of residual petroleum bitumen of grade VG-10 of approved quality using 1.7 kg per sqm on damp proof course after cleaning the surface with brushes and finally wiping with cloth lightly soaked in kerosene oil
177	Centering & shuttering for walls/retaining walls etc., incl. strutting & propping, removal of formwork
178	RCC 1:1.5:3 in beams/landings etc.
179	Centering and shuttering including strutting, propping etc. and removal of form for all heights – Foundations, footings, bases of columns, etc., for mass concrete
180	Centering & shuttering for slabs/lintels
181	Centering & shuttering for suspended floors/landings
182	Centering & shuttering for shelves (cast in situ)
183	Centering and shuttering for columns, pillars, piers, abutments, posts and struts.
184	Extra for centering & shuttering for additional height over 3.5 m
185	Edges of slabs & breaks (<20 cm)
186	Centering & shuttering for slabs
187	Centering and shuttering for lintels, beams, plinth beams, girders, bressumers, and cantilevers with water-proof ply 12 mm thick.
188	Tie bolt with spring coil & plastic cone
189	Steel reinforcement for RCC
190	Steel reinforcement (alt. item)
191	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level – Thermo-Mechanically Treated bars of grade Fe-500D or more
192	Steel reinforcement for R.C.C. work above plinth level (Fe-500D or more).
193	R.C.C. work in Footing, concrete of M25 grade (330 kg/cum)
194	R.C.C. work in Beam (above plinth level up to floor V)Add for extra cement in RCC M-25
195	Brick work with common burnt clay F.P.S. (non-modular) bricks of class 7.5 in foundation and plinth in cement mortar 1:6.
196	Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in cement mortar 1:6 (1 cement : 6 coarse sand)
197	Brick work with common burnt clay F.P.S. (non-modular) bricks of class 7.5 in superstructure above plinth level up to floor V level, in cement mortar 1:6.
198	Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with cement mortar 1:6 (1 cement : 6 coarse sand)
199	Granite 18 mm (area of slab >0.50 sqm) incl. bedding, polishing, etc.
200	Edge moulding to 18 mm granite, machine polished
201	Extra for fixing marble/granite in facia/drops (≤150 mm) with epoxy
202	M.S. grills fixed to steel windows by welding, incl. primer
203	Aluminium sliding door bolt, anodised AC-10 — 300×16 mm
204	Aluminium tower bolt, anodised AC-10 — 300×10 mm
205	Aluminium tower bolt, anodised AC-10 — 150×10 mm
206	Aluminium handle, anodised AC-10 — 125 mm
207	Aluminium hanging floor door stopper, anodised AC-10 — twin rubber
208	Aluminium casement stay, anodised AC-10
209	Structural steel work in built-up sections/trusses/framed work incl. primer
210	Steel work in tubular sections with 15×3 mm lugs, 10 cm long (incl. priming)
211	Steel work welded in built-up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel, etc., as required – In gratings, frames, guard bars, ladders, railings, brackets, gates & similar works
212	Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates, etc., including welding, grinding, buffing, polishing and fixing with necessary fasteners, bolts, and accessories.
213	Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate), 40 mm thick with 20 mm nominal stone aggregate, finished with floating coat of neat cement and cement slurry
214	52 mm cement concrete floor with hardener
215	Kota stone slab flooring over 20 mm thick base, laid and jointed with grey cement slurry, base mortar 1:4.
216	Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm thick cement mortar 1:3, jointed with grey cement slurry and polished.
217	Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 in skirting, risers, dados etc., in CM 1:3, jointed with grey cement slurry (3.3 kg/sqm) and white cement pigment.
218	Providing and laying 1st quality ceramic glazed floor tiles 300×300 mm in CM 1:4, jointed with grey cement slurry (3.3 kg/sqm) and white cement pigment.
219	Pre-coated GI profile sheets 0.50 mm (Z-120), fixed with self-drilling screws
220	Roofing accessories — Gutter (600 mm overall girth), pre-coated GI
221	12 mm cement plaster 1:6 (rough side)
222	15 mm cement plaster in CM 1:4 on rough side of wall
223	15 mm cement plaster on rough side of wall, mix 1:6 (1 cement:6 coarse sand).
224	12 mm cement plaster finished with floating coat of neat cement (1:4 mix, 1 cement : 4 fine sand) on brick surface
225	Providing and applying white cement-based putty of average thickness 1 mm, of approved brand, over plastered surface for smooth finish.
226	6 mm cement plaster 1:3 on brick wall
227	Plaster of Paris putty 2 mm
228	Finishing walls with water proofing cement paint of required shade: new work (two or more coats @3.84 kg/10 sqm).
229	Finishing walls with textured exterior paint of required shade – New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm
230	Premium Acrylic Smooth exterior paint (two or more coats over primer)
231	Priming coat on steel work with red oxide zinc chromate primer
232	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade – New work (two or more coats)
233	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade – Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
234	Preparation and consolidation of subgrade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the subgrade and disposal of surplus earth with lead upto 50 metres
235	Supplying and stacking at site – 63 mm to 45 mm size stone aggregate
236	Supplying and stacking at site – 53 mm to 22.4 mm size stone aggregate
237	Supplying and stacking at site – Stone screening 13.2 mm nominal size (Type A)
238	Supplying and stacking at site – Stone screening 11.2 mm nominal size (Type B)
239	Supplying and stacking at site – Red Bajri
240	Supplying and stacking at site – Moorum
241	Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand-picking, rolling with 3-wheeled road/vibratory roller 8–10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening/binding material to fill up interstices of coarse aggregate, watering and compacting to the required density.
242	Supplying at site angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes up to 10 mm dia etc. complete
243	Extra for providing & mixing hardening compound in cement concrete (as per manufacturer’s spec.)
244	Providing & laying bitumen hot sealing compound for expansion joints (Grade A) – 5 cm × 5 cm
245	Road surface marking with ready mixed road marking paint, two or more coats on bituminous surface
246	Providing & fixing glow studs 100×20 mm with retro-reflective panels, fixed with approved adhesive
247	Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length (total length 90 m), having 50 nos rounds per 6 metre length, up to 3 m height of wall with existing angle iron \"Y\" shaped placed 2.4 m or 3.0 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, with reinforced barbed tape (R.B.T.) / spring core (2.5 mm thick) wire of high tensile strength of 165 kg/sq.mm with tape (0.52 mm thick) and weight 43.478 gm/meter (cost of M.S. angle, C.C. blocks shall be paid separately)
248	Retro-reflective overhead informatory road signage boards (2 mm Al sheet with Type-III sheeting), complete
249	2.5 mm thermoplastic retro-reflective road marking strips by automatic applicator, complete
250	Kerb channel 30 cm wide, 50 mm thick in CC 1:3:6 over 75 mm brick ballast bed, finished smooth
251	Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc., all complete as per the direction of Engineer-in-Charge
252	Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 Cement : 3 coarse sand), including making joints with or without grooves, making drainage openings wherever required, complete as per direction of Engineer-in-Charge. (Precast C.C. kerb stone shall be approved by Engineer-in-Charge)
253	Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator, vacuum dewatering process and finally finished by floating, brooming with wire brush etc., complete as per specifications and directions of Engineer-in-charge. (Panel shuttering work paid separately)
254	Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves, drainage opening wherever required, complete as directed by Engineer-in-charge (Precast C.C. kerb stone)
255	100 mm CI spun iron S&S pipe (IS 3989)
256	Terminal guard for 100 mm CI pipe
257	G.I. pipe, 32 mm dia (external work)
258	G.I. pipe, 40 mm dia
259	G.I. pipe, 50 mm dia
260	G.I. pipe, 65 mm dia
261	G.I. pipe, 80 mm dia
262	Painting G.I. pipe, 32 mm dia
263	Painting G.I. pipe, 40 mm dia
264	Painting G.I. pipe, 50 mm dia
265	Painting G.I. pipe, 65 mm dia
266	Painting G.I. pipe, 80 mm dia
267	Sand filling around G.I. pipe, 32 mm
268	Sand filling around G.I. pipe, 40 mm
269	Sand filling around G.I. pipe, 50 mm
270	Sand filling around G.I. pipe, 65 mm
271	Sand filling around G.I. pipe, 80 mm
272	C.I. double acting air valve, 50 mm
273	C.I. double acting air valve, 80 mm
274	Gun metal gate valve, 20 mm (screwed end)
275	Gun metal gate valve, 25 mm
276	Gun metal gate valve, 32 mm
277	Gun metal gate valve, 40 mm
278	Gun metal gate valve, 50 mm
279	Gun metal gate valve, 65 mm
280	Gun metal gate valve, 80 mm
281	Masonry gate valve chamber (30×30×50 cm) with FPS bricks 7.5
282	Masonry water-meter chamber (60×45×50 cm) with FPS bricks 7.5
283	G.I. Union, 25 mm
284	G.I. Union, 32 mm
285	G.I. Union, 40 mm
286	G.I. Union, 50 mm
287	G.I. Union, 65 mm
288	G.I. Union, 80 mm
289	Manhole cover 455×610 mm with frame (light duty)
290	Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar 1:2 (1 cement : 2 fine sand) including testing of joints, etc., complete — 450 mm dia R.C.C. pipe
291	Constructing brick masonry manhole (90×80×45 cm) with RCC slab, plastering, channels etc.; with FPS bricks class 7.5 and light duty CI cover
292	Extra depth for manhole size 90×80 cm; with FPS bricks class 7.5
293	Brick masonry circular manhole (0.91 m dia bottom, 0.56 m top) 0.91 m deep with HD-20 SFRC cover & frame; with FPS bricks class 7.5
294	Extra depth for circular manholes 0.91 m dia beyond 0.91 m to 1.67 m; with FPS bricks class 7.5
295	Providing & fixing square mouth S.W. gully trap SP-1, 180×150 mm “P” type with brick masonry chamber & watertight CI cover; with FPS bricks class 7.5
296	M.S. foot rests in manholes (20×20×10 cm CC 1:3:6; 20×20 mm sq. bar)
297	Orange colour plastic encapsulated foot rest
298	RCC MH cover & frame LD-2.5, 600×450 mm
299	RCC MH cover & frame HD-20, 560 mm dia
300	Soak pit 2.5 m dia × 3.0 m deep (honey-comb shaft)
301	Providing and placing PVC water stops (IS:12200) for RCC joints – serrated with central bulb, 225 mm wide, 8–11 mm thick.
302	Providing and applying integral crystalline slurry waterproofing on vertical RCC surfaces (two coats @ 0.70 kg/sqm/coat).
303	Providing and applying integral crystalline slurry waterproofing on horizontal RCC surfaces (one coat @ 1.10 kg/sqm).
304	Drilling through rocky strata incl. boulders (300 mm)
305	Boring/drilling for casing/strainer pipe up to 90 m depth – 400 mm dia, all types of soil
306	Boring/drilling beyond 90 m & up to 150 m – 400 mm dia, all types of soil
307	PVC well screen pipe 150 mm (IS:12818)
308	Stone boulders 5–20 cm in recharge pit
309	Gravel 5–10 mm in recharge pit
310	Coarse sand 1.5–2.0 mm in recharge pit
311	Gravel packing in tubewell (IS 4097)
312	ERW FE-410 M.S. casing pipe 200 mm dia, min. 5.40 mm wall, including painting & accessories
313	ERW FE-410 plain-slotted pipe 200 mm dia, min. 5.40 mm wall, including painting & accessories
314	Development of tubewell with compressor, testing & disinfection
315	Mild steel threaded cap / plate for borewell – 200 mm
316	M.S. clamp for casing/housing pipe – 200 mm
317	Bail / bottom plug – 200 mm
318	Acrylic Flooring (8 Layer System) — including 1 layer resurfacer, 5 layers cushion, 2 layers colour, line marking as per international standards
319	Hand Operated Hydraulic Moveable Basketball System with 20 mm thick transparent acrylic board, aluminium anodized frame, dunking rims, non-marking wheels, and hydraulic lifting system as per BFI specifications – complete set
320	Handball Goal Post Poles (moveable) – 3 m width × 2 m height, made of M.S. Pipe 80 mm dia (3.2 mm thick) with rear pipes, hooks, wheels and heavy-duty net – complete set
321	Volleyball Poles (Basic model) with overlapping system for height adjustment, including plastic coated steel wire net and fiberglass antenna – complete set
322	Volleyball Poles (Basic model) with overlapping system for height adjustment, including plastic coated steel wire net and fiberglass antenna – complete set
323	Line marking of Badminton Court on Kota stone flooring as per international rules with paint (Asian / Berger or equivalent)
324	Installation Charges for sports equipment and fixtures
325	Chain Link Fencing (3.0 m high) – including posts, supports and all fixtures
326	Supply & fixing HDPE double wall corrugated pipe IS 16098 (Part-2) for underground drainage incl. specials, re-excavation & refilling; 200 mm dia
327	Borewell submersible pumping set (15 HP approx., 15000 L/h @ 250 m head) incl. cable, panel, uPVC riser, fittings & clamps – complete
328	65 mm G.I. pipe with fittings, supports & two coats enamel paint
329	Outdoor weather-proof plumbing panel with MCCB, metering, SPD, bus-bar, MCBs; supply, fixing, testing & commissioning
330	125 micron polythene sheet (7 sqm/kg)
331	HORTICULTURE
332	Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and disposal of surplus soil, spreading and leveling, refilling with earth mixed with sludge/manure before and after flooding.
333	Supplying and stacking sludge at site including royalty and carriage up to 5 km lead (measured in stacks reduced by 8% for payment).
334	Supplying and stacking dump manure from approved source including carriage up to 5 km (reduced by 8% for payment).
335	Mixing earth and sludge/manure in required proportion as directed by Officer-in-Charge.
336	Grassing with Doob grass in rows 5 cm apart in both directions, including watering and maintenance for 30 days or more.
337	Uprooting rank vegetation and weeds, digging area to 60 cm depth, removing roots, flooding, fine dressing for new grass, disposal of rubbish.
338	Preparation of beds for hedging and shrubbery by excavating 60 cm deep, refilling with earth and sludge/manure (8:1), flooding and dressing.
339	Digging holes in ordinary soil and refilling with excavated earth mixed with manure/sludge (2:1), flooding with water, dressing, removing surplus earth.
340	Edging with bricks laid dry lengthwise, excavation, refilling, consolidating with hand packing and neat dressing.
341	Flooding the ground with water including making kiaries and dismantling the same.
342	Providing and watering of irrigation water through water tanker (5000 L), including cost of water, filling, and site watering, as per direction. (30 trips in 3 months at 3-day intervals)
343	Plantation of Trees, Shrubs, and Hedge at site including watering and removal of unserviceable materials (Hedge Plant/Ground cover).
344	Providing and stacking of Cassia fistula (Amaltash) of height 120–135 cm in big poly bags (25 cm).
345	Providing and stacking of Hibiscus rosasinensis of height 45–60 cm with 3–4 branches in earthen pots (20 cm).
346	Providing and stacking of Delonix regia (Gulmohar) of height 150–165 cm in big poly bags (25 cm).
347	Supply and stacking of Azadirachta indica (Neem) plant of height 120–130 cm in big poly bags (25 cm).
348	Providing and stacking of Bottle palm of height 210–240 cm, bottom girth 30–35 cm, in big HDPE bags.
349	Providing and stacking of Foxtail palm of height 240–270 cm, bottom girth 35–40 cm, in big HDPE bags.
350	Providing and stacking of Mangifera indica (Mango grafted) height 60–75 cm in big poly bags (25 cm).
351	Providing and stacking of Michelia champa (Golden Champa) height 90–105 cm in earthen pots (25 cm).
352	Providing and stacking of Peltophorum species height 150–165 cm in big poly bags (25 cm).
353	Providing and displaying Marigold Jaffri French orange/yellow/Russet, 60–75 cm height, 60–75 flowers, in 30 cm pot.
354	Providing and stacking of Spider plant (Chlorophytum comosum).
355	Providing and stacking of Lemon tree.
356	Providing and stacking of Banana tree.
357	Providing and fixing of Precast RCC Garden Bench including all labour, T&P etc. complete.
358	Laying of watering/sprinkler pipe along garden, making outlet points and providing 2 hose pipes for new lawn/garden.
359	INTERNAL WATER SUPPLY AND SANITARY WORKS
360	Providing & fixing stone slab table rubbed, edges rounded and polished of size 75 X 50cm deep and 1.8 cm thick fixed in urinal patitions by cutting chase of appropriate width with chase cutter and embedding the stone in chase with epoxy grout or with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregste 6mm nominal size) as per Engineer-in-charge and finished smoothWhite Agaria Marble Stone
361	Providing and fixing Salem Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with CI brackets and stainless steel waste with plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required. Kitchen sink with drain board510X1040mm bowl depth 200mm.
362	Sink without drain board610X510 mm bowl depth 200mm.
363	Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mmthick hard board backing : 17.32.1) Rectangular shape 453x357 mm
364	Providing and fixing toilet paper holder : 17.34.1) C.P. brass
365	Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid
366	Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approvedby Engineer - in-charge
367	Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms.(sink & urinal)
368	Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materialswith snap fittings of approved quality and colour weighing not less than 105 gms.
369	Providing and fixing PTMT towel rail complete with brackets fixed wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm andeffective height of 88 mm, weighing not less than 190 gms
370	Providing and fixing CP Brass shower rose with 15 or 20 mm inlet 100 mm diameter
371	Providing & fixingPTMT towel ring trapezoidal shape 215 mm long 200 mm wide with minimum distance of 37 mm from wall face with concealedfittingsarrangement of approved quality and colour weighing not less than 88 gms
372	Providing and fixing CP Brass Single lever telephonic wall mixer of quality & makeas approved by Engineer in charge. a) 15 mm nominal dia.
373	Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore
374	Providing and fixing C.P. brass bib cock of approved quality confirming to IS:893115mm nominal bore
375	Providing and fixing C.P.brass angle valve for basin mixer and geyser points ofapproved quality conforming to IS 8931 a) 15 mm nominal bore.
376	Providing and fixing wash bashin with C.I. brackets, 15mm dia cp brass singal hole basin mixer of approved quility and make, including painting of fittings and brackets, cutting and making good the walls wherever required -a) White vitreous china wash basin size 550x400 mm with a 15 mm cp brass singalhole basin mixer.
377	Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440 mm withintegral type foot rests
378	Providing & fixing PVC waste pipe for sink oncluding PVC waste fitting Complete Flexible Pipe 32mm Dia
379	Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required :Size 450x300x150 mm
380	Providing and fixing MS holder bat clamps of approved design to cast iron (spun) pipe embedded in and Including cement concrete blocks 10 x10 x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc.For 100mm dia. Pipe
381	Providing and fixing PTMT grating of approved quality and colour18.58.1) Circular type 125 mm nominal dia
382	Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size)alround CI HUBLESS includingbed concrete as per standard designNote: This work shall be done all-round PIPE AT ground floor\"s toilet.100mm diameter
383	Providing and fixing in position 25 mm diameter mosquito proof coupling ofapproved municipal design.
384	Providing and fixing CPVC pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 mt spacing. this includes jionting of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge.Internal work -Exposed on Wall15 mm nominal outer dia pipes
385	20 mm nominal outer dia pipes
386	25 mm nominal outer dia pipes
387	32 mm nominal outer dia pipes
388	40 mm nominal outer dia pipes
389	50 mm nominal outer dia pipes
390	Providing and fixing CPVC pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 mt spacing. this includes jionting of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the wall same including testing of joints complete as per the direction of engineer incharge concealed work including cutting chases and making good the wall etc.15 mm nominal outer dia pipes
391	20 mm nominal outer dia pipes
392	Providing and fixing G.I. pipes complete with GI fittings and clamps including cutting and making good the walls etc. (internal work)For roof level25 mm dia, nominal bore
393	32 mm dia, nominal bore
394	40 mm dia, nominal bore
395	50 mm dia, nominal bore
396	65 mm dia, nominal bore
397	Painting with synthetic enamel paint of approved brand and manufacture to give an even shadeTwo more coast on new work
398	Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends)25mm dia, nominal bore
399	32 mm dia, nominal bore
400	40 mm dia, nominal bore
401	50 mm dia, nominal bore
402	Providing and fixing gun metal non- return valve of approved quality (PN 1.6)40 nominal bore
403	50 nominal bore
404	80 nominal bore
405	Providing and fixing brass stop cock of approved quality15mm nominal bore
406	20mm nominal bore
407	Structual steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steelprimer all complete.
408	Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the basesupport for tank.
409	BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot eater circulation as specified65 nominal bore
410	80 nominal bore
411	Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (Class “O”) insulation on gyeser and solar water pipe suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required.19mm
412	Providing and fixing GI pipes medium class conferming to IS 1239 with GI fittings including cutting hole chase painted with primer, two coats of enamel paints etc80 mm dia, NB
413	Providing, fixing and jointing in position UPVC (SWR) pipe Type-B for soil waste, rain water and ventor antisyphonage pipe of approved make including all fittings (plain or door) e.g. bends, junctions, cowls, offsets, access pieces jointingincluding fixing the pipe on the wall/ceiling with suitable clamps ,holder bat clamps andanchor fastener of approved design toSWR pipe embedded, cement concrete block 10x10x 10 cm of 1:2:4 ( 1 cement: 4 coarse sand:4 graded stone aggregate 20 mm nominal size), cutting holes in wall and floors, excavation, refilling and disposal of surplus earth where required and marked good complete etc. and as per direction of Engineer in Charge.40 mm dia
414	50 mm dia
415	110 mm dia
416	Providing and fixing UPVC(SWR) Type-B of size 110 mm x75x40 mmMulti Floor Trap along with 110 mm dia PVC pipe up to floor level andPVC grating of approvedmake with suitable jointing to ensure leak proof service as per instruction for laying & jointing recommended by the manufacturer and including cement concrete 1:2:4 under and around the multi floor trapwhere requiredup to floor level complete in all respects including cutting and making good the walls and floors etc. complete in all respect as per full satisfactionof theEngineer – in – Charge. With 63 mm i/d outlet.( 110 x 75 x 40)
417	Providing and fixing UPVC(SWR) Type-B of size 110 mm x 90 mmNahani Trap along with 110 mm dia PVC pipe up to floor level andPVC grating of approved make with suitable jointing to ensure leak proof service as per instruction for laying & jointing recommended by the manufacturer and including cement concrete 1:2:4 under and around the Nahanitrapwhere requiredup to floor level complete in all respects including cutting and making good the walls and floors etc. complete in all respect as per full satisfactionof theEngineer – in – Charge.With 90 mm i/d outlet.
418	Providing and fixing end cap (door piece) of uPVCfor cleaning.with 110 OD
419	Providing and fixing uPVC 110mm P Trap with minimum 50mm water seal with rubber seal on inlet to push fit hopper for indirect waste connections
420	Providing, fixing, testing and commissioning ofpipe inlet fittings fabricated withUpvcwith maximum 3 inlets 40, 50 & 75 mm OD size Upvc pipe, fixed to \"P\" traps includingDripseal/Pipe seal/solvent /rubber ring joint complete .
421	Providing and fixing brass ball valve with SS 304 Stem and ball, teflon seat complete (PN-40).15 mm dia nominal bore
422	20 mm dia nominal bore
423	25 mm dia nominal bore
424	Providing, fixing, testing and commissioning of motorised butterfly valve of following dia for filling of overhead water tank complete with high and low level control switches to control tanks. The level controllers shall be installed in iverhead tanks. The level switch will close the valve when water level is high in overhead tank and open the valve when overhead water tank level is low. The system should be complete in all respects with accessories 220 V AC / 2 V DC, IP67 electrical water level control unit, copper control wiring in whether proof casing etc.50 mm dia NB Float Valve
425	Solar Water HeatersSupply, erection, testing & commissioning of solar water heating system with following details :System temperature output : 60 degree C (during clear sunny days) System type : Thermo syphonSystem : Non PressurisedApplication : Bathing / Washing / CookingType of Solar Collectors : Copper tube Flat Plate Collectors as per BIS with following specifications -Size of Collector : 2080 x 1070 x 100 mmNumber of Collector : To suit system requirement. Absorber area : 2 sq MType : Cu - Cu Weight : 46 Kg (Dry)Absorber Coating : Selective - NALSUN Absorbivity : > 0.95Emissivity : < 0.2Frame Material : 16 SWG extruded Aluminium Glazing : Toughened GlassGlass beeding : EPDMFinish : Painted by approved shade Eelectrical element and control panel Hot water return pumpHardware : SS 304 Insulation : PUFCollector Stand : 35x35x3 mm MS angleHot Water Tank : Cylindrical - vertical / horizontal, Stainless steel 304 grade with 100 mm thick Rock Wool insulation including 22 SWG aluminium cladding.The entire system should be complete with internal piping in G.I. (class B) with 50mm rock wool insulation of density 48 kg/m3with 26 SWG Al claddingnecessary
426	INTERNAL ELECTRIFICATION
427	Wiring for light point / fan point /exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC Conduit, with modular switch,modular plate ,suitable GI Boxand earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.a) Group C
428	b) Group A
429	Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper condutor single core cable in surface / recessed PVC conduit 2 way modular switch,modular plate,suitable GI box and earthing the point with 1.5 sq.mm .FRLSPVC insulated copper conductor single core cable etc as required.
430	Wiring for group controlled (looped) light point / fan point /exhaust fan point/ call bell point (without independent switch) with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed Steel Conduit, with modular switch,modular plate ,suitable GI Boxand earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as required.a) Group C
431	Wiring for light /power plug with 2x4 sq.mm FRLS PVC insulated copper conductor single core cable in surface /recessed PVC conduit along with 1 No 4 sq.mm FRLSPVC insulated copper conductor single core cable for loop earthing as required.
432	Wiring for light /power plug with 4x4 sq.mm FRLS PVC insulated copper conductor single core cable in surface /recessed PVC conduit along with 2 No 4 sq.mm FRLSPVC insulated copper conductor single core cable for loop earthing as required.
433	Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor single core cable in surface/recessed PVC Conduit as required.(i) 2x1.5 sq.mm + 1x1.5 sq.mm earth wire
434	(ii) 2x2.5 sq.mm + 1 x 2.5 sq.mm earth wire
435	(iii) 2 x 4 sq.mm + 1 x 4 sq.mm earth wire
436	(iv) 2x6 sq.mm + 1x6 sq.mm earth wire
437	(v) 4x10 sq.mm + 2x6 sq.mm earth wire.
438	(vi) 4x16 sq.mm + 2x6 sq.mm earth wire
439	(vii) 2x10 sq.mm + 1x6 sq.mm earth wire
440	(v) 4x6 sq.mm + 2x6 sq.mm earth wire.
441	Supplying and fixing modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required.5/6 amps switch
442	3 pin 5/6 amps socket outlet
443	Supplying and fixing of following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required.3 Module (100mmx75mm)
444	Supplying and fixing suitable size GIbox with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch ,connectionetc as required.
445	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 15/16 and 5/6 amps modular socket outlet with shulter and 15/16 amps modular switch connection,etc as required.
446	Supplying and fixing call bell/ buzzer suitable forsingle phase ,230 volts ,completeas required.
447	Supplying and fixing of following sizes of medium class PVC conduit along with acessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.(i) 25mm
448	(ii) 32 mm
449	Supplying and fixing 20 amps, 240 volts SPN industrial type, socket outlet with 2 poles and earth metal enclosed plug top along with 20 amps \"C\" Curve, SP, MCB in sheet steel encloser on surface or in recess with chained metal cover for the socketoutlet and complete with connections, testing & commissioning etc in required.
450	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing of 25A modular socket outlet and25A modular SP MCB \"C\" curve including connections painting etc. as required.
451	Supplying and fixing 30 amps, 415 volts TPN industrial type, socket outlet with 4 pole and earth metal enclosed plug top along with 30 amps \"C\" Curve, TP, MCB in sheet steel encloser on surface or in recess with chained metal cover for the socketoutlet and complete with conncections, testing & commissioning etc as required.
452	Supplying & fixing 75mm x 75mm x 10 mm zinc passivated box with mould cordoutlet complete with RJ 45 sockets as required for computer data point.
453	Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required1 Run of Cable
454	Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator)4 way (4+12) Double door
455	6 way (4+18) Double door
456	8 way (4+24) Double door
457	Supplying and fixing following way, horizontal type single pole and neutral, sheet steel, MCB distribution board, 230 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator)8 way, Double door
458	Supply and fixing 5 amps to 32 amps rating.240/415 volts.\"C\" curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections,testing and commisioning etc.as requireda) Single pole
459	Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity 30 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.a) 63 amps
460	Supplying and fixing following rating, double pole, (single phase and neutral), 230 volts, residual current circuit breaker (RCCB), having a sensitivity 30 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.a) 40 amps
461	Supplying, erection and commissioning of cubical type sheet steel clad IP52, wall / floor mounted totally enclosed LTswitch board suitable or use on 415 V 3 phase 4 wire 50 cycles complete housed with incoming and outgoing bus bars including interconnection accessories with cable glands etc complete as required and with following incoming and outgoing switchgear as per specification and drawings.A INCOMING100 A 4P MCCB 25KA -1 No.Voltmeter 0-500V with selector switch - 1No. Ameter 0-100A with selector switch $ CTS- 1 No Indicating lamp RYB- 1 Set Bus Bar150ATPN Aluminium bus bar having a current density of not less than 1.0 Amp sq.mm. and the neutral bus of50% capacity interconnections between bus bars and breakers shall be through solid copper strip.OUTGOING63A 4P MCB 10KA- 6 Nos.40ADP MCB 10KA - 2 Nos.
462	Supplying and fixing of following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required.a) 75mm x 75mm
463	Supplying and drawing following pair, 0.5.mm dia FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/ recessed steel/ PVC conduit as required.a) 2 Pair
464	Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding plate etc .as required.a) Telephone socket outlet
465	b) TV outlet
466	Supplying and fixing of the following sheet steel clad wall / recess mounting telephone tag blocks of krone make constructed from 14 SWG sheet steel finished with red oxide coating of two coats of paint with hinged gasketted powder coated door and complete.a20 pairs
467	b) 05 pairs
468	Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected withPVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
469	Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and saltas required.
470	Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nutbolt & spring washer spaced at 50mm)
471	Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
472	Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess forconnections etc. as required.
473	Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthingas required.
474	Supllying, Installation, Testing & commisioning offollowing type LED reccesed/surface mounted light fixture made of Aluminium die cast, proper heat sink, minimum 90Lm/W complete in all aspects as mentioned in this tender. With 5 Years Warranty on LED and Driver20W LED Tube light
475	a) 15W LED Downlighter
476	b) 22W LED Tubelight
477	c) 18W LED Tubelight
478	d) 2x2 36W LED Panel
479	Bracket Light
480	10W LED Bulkhead
481	Supplying of 305 mm 1400 RPM exhaust fan complete with louver and bird guardscreen with 3 core flexible wire as required.
482	Supplying ofceiling fan, complete with blades with suitable length of down rods shackle insulator earthing point including connection etc . as required.a) 1200 mm sweep
483	Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor,single core cable and earthing etc. as required.
484	Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copperconductor, single core cable etc. as required.
485	Installtion of exhasut fan up to 450 mm sweep in the existing opening, including making the hole to suit the size of the abvoe fan, making good the damage,connection testiing and commissioning etc as requried
486	Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of allsizes.
487	Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plateetc.as required.
488	Supllying, Installation, Testing & commisioning offollowing type LED reccesed/surface mounted light fixture made of Aluminium die cast, proper heat sink, minimum 90Lm/W complete in all aspects as mentioned in this tender. With 5 Years Warranty on LED and Driver10 W LED downlight
489	Supplying and fixing modular switch/socket on the existing modular plate & switch box including connection but excluding modular plate as required.5/6 amps switch
490	3 pin 5/6 amps socket outlet
491	Supplying and fixing following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit or cutting the wall and mak ing goodthe same of recessed conduit as required.25mm
492	32mm
493	Supplying, erection and commissioning of cubical type sheet steel clad IP52, wall / floor mounted totally enclosed LTswitch board suitable or use on 415 V 3 phase 4 wire 50 cycles complete housed with incoming and outgoing bus bars including interconnection accessories with cable glands etc complete as required and with following incoming and outgoing switchgear as per specification and drawings.INCOMINGa) 100 A 4P MCCB 16KA-1 No.b) Voltmeter 0-500V with selector switch- 1 No.c) Ameter 0-150A with selector switch $ CTS- 1 Nod) Indicating lamp RYB- 1 SetBus Bar150ATPN Aluminium bus bar having a current density of not less than 1.0 Amp sq.mm. and the neutral bus of50% capacity interconnections between bus bars and breakers shall be through solid copper strip.OUTGOINGa) 63A 4P MCB 10KA- 4 Nos.b) 40ADP MCB 10KA - 2 Nos.
494	Supplying, erection and commissioning of cubical type sheet steel clad IP52, wall / floor mounted totally enclosed LTswitch board suitable or use on 415 V 3 phase 4 wire 50 cycles complete housed with incoming and outgoing bus bars including interconnection accessories with cable glands etc complete as required and with following incoming and outgoing switchgear as per specification and drawings.INCOMINGa) 100 A 4P MCCB 25KA-1 No.b) Voltmeter 0-500V with selector switch- 1 No.c) Ameter 0-150A with selector switch $ CTS- 1 Nod) Indicating lamp RYB- 1 Set Bus Bar150ATPN Aluminium bus bar having a current density of not less than 1.0 Amp sq.mm. and the neutral bus of50% capacity interconnections between bus bars and breakers shall be through solid copper strip.OUTGOINGa) 63A 4P MCB 10KA- 9 Nos.b) 40ADP MCB 10KA - 3 Nos.
495	Supplying, erection and commissioning of cubical type sheet steel clad IP52, wall / floor mounted totally enclosed LTswitch board suitable or use on 415 V 3 phase 4 wire 50 cycles complete housed with incoming and outgoing bus bars including interconnection accessories with cable glands etc complete as required and with following incoming and outgoing switchgear as per specification and drawings.INCOMINGa) 100 A 4P MCCB 25KA-1 No.b) Voltmeter 0-500V with selector switch- 1 No.c) Ameter 0-150A with selector switch $ CTS- 1 Nod) Indicating lamp RYB- 1 Set Bus Bar150ATPN Aluminium bus bar having a current density of not less than 1.0 Amp sq.mm. and the neutral bus of50% capacity interconnections between bus bars and breakers shall be through solid copper strip.OUTGOINGa) 63A 4P MCB 10KA- 9 Nos.b) 40ADP MCB 10KA - 3 Nos.
496	EXTERNAL ELECTRIFICATION
497	Providing & fixing MV Danger Notice Plate (200×150 mm, 2 mm MS, vitreous enamel)
498	Providing & fixing HT Danger Notice Plate (250×200 mm, 2 mm MS, vitreous enamel)
499	11 kV HT DP structure complete (RSJ poles, AB switch, HG fuses, LA, insulators, stays, foundations, painting, accessories & commissioning)
500	11 kV HT metering panel (indoor) with trivector meter, CT/PT set, tested/approved by supply authority

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Assam Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of Permanent Campus At Jnv Hojai Assam, Hojai-Assam

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of Permanent Campus At Jnv Hojai Assam, Hojai-Assam

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us