|
| 1 | Earthwork excavation in hard soil with initial lead and initial lift including dressing and levelling the foundation bed and depositing the excavated earth away from worksite etc complete. |
| 2 | Supplying, filling in foundation and plinth with sand, watered and rammed including cost, conveyance & royality and all taxces of materials cost of all labour with T&P etc. complete. |
| 3 | Cement Concrete (1:3:6) with 40 mm size H.G.C.B. metal including cost,conveyance and royalty etc. |
| 4 | Supplying and fixing of precast interlocking Concrete block 60 mm to 80 mm thick with crushing strength of any individual shall not or less than 40/N Sqm as per drawing and technical specification clause 1504 of MORTH and BS specification 1717-11-1986 with all cost of materials , labour ,carriage etc complete in all respect. Data for 225 Sqm. |
| 5 | Fly ash brick masonry in cement mortar (1:4) using 23 Cm. x 11 Cm. x 8 Cm. size fly ash bricks having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % in foundation and plinth |
| 6 | Fly ash brick masonry in cement mortar (1:6) using 23 Cm. x 11 Cm. x 8 Cm. size fly ash bricks having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % in Superstructure |
| 7 | RCC M-20 work with 20mm down grade course aggregate including hoisting and laying. Column Footing |
| 8 | Plinth |
| 9 | Column And Beam |
| 10 | Straightening bent up or coiled M.S. rod or HYSD steel (Fe- 415), cutting, bending, cracking, hooking, welding or jointing (if required), the M.S rod or HYSD steel and binding, tying the grills, hoisting, lowering and placing in proper position . |
| 11 | Cement Concrete (1:4:8) with 40 mm size H.G.C.B. metal including cost,conveyance and royalty etc. |
| 12 | 12mm (½\") thick cement plaster (1:6) finshing smooth to outside smooth surface of brick walls after racking out the joint including watering and curing with cost, conveyance, royalties etc complete. |
| 13 | 16mm (⅝\") thick cement plaster (1:6) finshed smooth to inside rough surface of 9\"/10\" thick brick walls after racking out the joint including watering and curing with cost and conveyance, royalties etc complete. |
| 14 | 2.5 cm thick A.S. flooring in C.C (1:2:4) with 12 mm size HGCB chips including punning including cost, conveyance & royality of materials. |
| 15 | 20mm thick cement plaster in cement mortar (1:6) for Stone masonary including cost, conveyance & royality of materials. |
| 16 | Supplying, fitting and fixing Ceramic Tiles in floor of size 40cmx40cm of approved make conforming to IS :13755 laid on 20 mm thick cement motar(1:4) filling joints with white cement of approved quality including cost of all material,labour T&P etc requred for the work all complete as per direction of E.I.C. |
| 17 | Fixing the Ceramic Tiles 40cmx40cm in dados skirting risers of steps on on 12 mm thick C.P. (1:3) jointed with neat cement Slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete . |
| 18 | Priming 1coat with wall cement primer (water bound) including cost,conveyance etc complete. |
| 19 | Distempering 2 coats to walls with Distemper of approved shade on new work including cost,conveyance etc complete. . |
| 20 | Wall painting with 2 coats with weather coat of approved shade on new work to give an even shade including cost,conveyance etc complete |
| 21 | Providing, fitting and fixing of Al door with anodized Al. door section of 9202 as vertical member, 9201 as top and 9200 as middle and bottom member with frame section No.9221 and tapered clip no. 4660 and the frame to be completed by means of jointing angle no. 1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges , etc. complete as per direction of the Engineer-in-charge |
| 22 | Labour for drilling of 125X100mm dia bore (00 Mtr to 30 Mtr) |
| 23 | Labour for drilling of 125X100mm dia bore (30 Mtr to 60 Mtr) |
| 24 | Labour for lowering of 125 mm dia PVC / GI casing Pipe. |
| 25 | Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply & use of all necessary equipments & labour as per the direction of Engineering in charge |
| 26 | Cost of 125mm dia PVC Casing pipe ( SCH - 80) |
| 27 | Supplying of all labour T&P materials etc for fitting and fixing of india mark II/III hand pump with 32 mm riser pipe complete set including loading and unloading charges transportationof materials to sitte etc or as per the direction of Engineer-in-charge |
| 28 | Bore set with Bearing ND Handle |
| 29 | Boring Rod |
| 30 | Supply of elegant look 40 W (Maximum) AIO Solar Street lights having extruded alluminium housing and inbuilt 100 Wp or more highly efficient Monocrystalline PV module mounted on the top of the luminaire housing for faster charging of battery in adverse weather condition & 12.8 Volt 36 Ah LiFePo4 Battery (MPPT charge controller having efficiency > 92 o/o & PIR Sensor to provide 2 days (24 hrs) back up in dimming condition. The initial lumen output of AIO street light shall be of 6400 lumens as per LM 79 repoft of third party NABL labonty in white colour i.e CCT 6000K (+/-500K). BMS has been designed in such a way to provide 2 days (24 Hrs) back up with dimming mode by activating PIR sensor and battery is completely theft retardant and maintenance free. The luminaire is having IP 65 protection for critical component like (LED compartment, Driver compaftment & Battery) and is as per IP test report of third party NABL lab. The AIO street light is having IK 07(as per the test report of third pafi NABL lab). |
| 31 | Supply of 7 mtr long hot dip G.I Tubular pole manufactured from HT steel as per BS EN 10025/IS 2062. (Make of poles: Utkal Galvanizers/Utkarsh/Bajaj JK/RR fransrail / Skipper or any equivalent. |
| 32 | Installation of Pole after making the suitable size civil foundation by using RCC foundation considering SBC as 10 T per sqmtr & fixing the foundation bolts in that foundation for smoother erection of pole on that foundation including transportation charges of pole. The scope of work is only for erection of pole and fixing the solar lights by using necessary machinery by adopting all standard safety norms |
| 33 | Const of Waste bin For the Peripheral devlopment of Ganjadhar Dam with proper coat and partition |
| 34 | Main Entrance Welcome Board – MS frame with ACP sheet, retro reflective vinyl, laminated8 ft × 4 ft |
| 35 | Directional Sign Boards – MS frame, GI sheet, reflective stickers, arrow signs3 ft × 2 ft |
| 36 | Information Board (History & details of dam, safety instructions) – ACP sheet with digital print & lamination6 ft × 4 ft |
| 37 | Tourist Spot Identification Boards – small stand boards for photo points, viewpoints2 ft × 1.5 ft |
| 38 | Rules & Safety Board – MS frame, weatherproof print4 ft × 3 ft |
| 39 | Supplying precast seating benches with proper paint for the development of Ganjadhar Dam Please Enable Macros to View BoQ information |
