|
| 1 | Taking down cement plaster on Brick / Concrete surfaces includingraking out joints, hacking for key scrubbing down with water and Removing rubbish to a distance exc 500m but not exc 1Km all as directed |
| 2 | Taking down Chowkhats or frames area not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) including making goodto match with adjoining surfaces complete all as specified and directed. |
| 3 | Taking down Chowkhats or frames area exc. 1.5 sqm but not exc 4sqm each with shutters (without taking off shutters from the frames) including making goodto match with adjoining surfaces complete all as specified and directed. |
| 4 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing)and rubbish off the premisescomplete all as specified and directed. |
| 5 | Demolition of plain cement concretein floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 6 | M&L for Plaincement concrete(1:3:6)type C-2 using 40 mm graded stone aggregate as in 75 mm thick sub base toflooring complete all as specified and as directed. |
| 7 | M&L forPlain cement concrete (1:2:4) type B-0 using 12.5 mm graded stone aggregate as in 25 mm thicksub base to floor to receive tile finishes complete all as specified and directed. |
| 8 | M & L forVitrified Ceramic tiles 8-10 mm thick,dark shade(square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including screed bed 15mm thickcement mortar (1:4) complete all as specified and directed. |
| 9 | M & L forVirified Ceramic tiles 8-10 mm thick, dark shade(square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in as Skirting / dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including10mm thick backing coat in CM(1:4) complete all as specified and directed. |
| 10 | M&L for preperation of new steel or iron surfaces exc 10cm width or girthand applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified & directed |
| 11 | M&L forPCC(1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protectionfinshed the concrete surface even and smooth without using extra cement including filling joints with sealing compound grade \"A\" complete all as specified and as directed. |
| 12 | Demolition of Brickwork or PCC solid block or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 13 | M&L for Precast cement concrete(1:3:6)type C-1 using 20 mm graded stone aggregate as in solidblock masonryexc 10 cm width and setting in cement mortar 1:6 complete all as specified and directed. |
| 14 | M&L forrendering 15mm thick in CM(1:4)on surface other than fair face of brickwork or on one side of lathing mixed with water proofing compound finished even & smooth without using extra cementincluding necessary scaffolding complete all as specified and as directed. (Note : WPC to be measured and paid separately under relevant item) |
| 15 | M&L forrendering 15mm thickcement mortar(1:6)on brick masonary walls surfacefinished even & smooth without using extra cement complete all as specified and as directed. |
| 16 | S&F Powder coated aluminium sliding window consistingframe,two Glazed shutter & one wiremesh shutter with the following items all as specified & directed :-(i) Aluminium frame section 116x36.50x1.80mm.(ii) Aluminium shutter glazed/skeleton section 50x20x1.50mm thick.(iii) Aluminium grill size 50mmx50mm and 4 to 5mm thick bars complete all as specified.(iv) Fixing arrangements legs in hold fast in walls incl PCC (1:3:6) making goog distributed surfaces complete in originally shape.(v) 4mm thick glass orinary quality and fixed with rubber gasket for with glazed shutter etc.(vi) Stainless steelwire mesh 0.36mm nominal dia avg aperature 1.14mm and fixed with rubber gasket for without glazed shutter etc.(vii) Aluminium disc /bow handle and locking system complete |
| 17 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 18 | S & F Butt hinges 100 mm size, medium weight, stainless steel complete all as specified and directed. |
| 19 | S&FAluminium anodised barreltower bolts 150 mm long of extruded section and fixed complete all as specified and directed. |
| 20 | S&Fextruded aluminium alloy handles 150mm size, fabricated type, anodised complete all as specified and directed. |
| 21 | S&F Aluminium alloy, anodised, 300mm long sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and directed. |
| 22 | S&F Floor door stopperaluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, 140mm long plate all as specified and directed. |
| 23 | S&F in repairs stainless steel decorative curtain rod (including bracket) of 25 mm bore with wood finishes (weight not less 400 gms per running meter) includingfancy finale caps cap (02 nos in each curtain rod)etc complete all as specified and as directed |
| 24 | S&F in repair Brass Chromium Plated designer Bracket for curtain rod of dia 25 mm dia made out of SS Flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with Rawl Plug of size not less than 50 mm long etc complete all as specified and as directed |
| 25 | M&Lfor prepartation of newly plastered surfaces of wall and finishing as per following specification complete all as specified and as directed :-(i)ApplyWall care putty 1mm thick (ii) One coat of alkali resistant primer(iii) Applying two coats of Acrylic emulsion distemper |
| 26 | M&L for preparation of new plastered surfaces of walland applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm / litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint (weather proof paint) of required shade (company depot tinted) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm including necessary scaffolding complete all as specified and as directed. |
| 27 | M&L for complete removal of existing treatmentand applyingtwo coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm / litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint (weather proof paint) of required shade (company depot tinted) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm over old plastered surfaces of wall including necessary scaffolding complete all as specified and as directed. |
| 28 | M & L for complete removal of existing treatment of wall includingwashing, rubbing down and stoppingand finishing as per following specification all as specified & directed :-(i)ApplyWall care putty 1mm thick (ii) One coat of alkali resistant primer(iii) Applying two coats of Acrylic emulsion distemper |
| 29 | Supply only Liquid waterproofing compound, ISI marked, complete all as specified and directed. |
| 30 | S&F magnetic catcher with brass body and strike plate including letting in and fixed complete all as specified and directed. |
| 31 | Dismantling wrought iron or mild steel work of any description not otherwise provided forcomplete all as specified and directed. |
| 32 | Dismantling structural steel including gates ,doors, rolling shutter purlins,rafters etc complete all as specified and as directed. |
| 33 | M&L for Preparation of Old decorated ceiling surface and applying two coats of white wash including necessary scaffolding etc complete and as specified & directed. |
| 34 | Demolition of reinforced cement concrete of any description and any position like stair, handrail , chajjas, etc and in any position not otherwise specifically provided forall as spcified and all as directed |
| 35 | Removal of complete vegetation from roof/ wall/ chajja/ drainage pipe line and treated with chemical glycophosphate and filling the hole with PCC 1:2:4 as spcified and all as directed |
| 36 | Removing building materials etc. to a distance exc 900m but not exc 1.0Km,including loading, unloading and stacking at the destination complete all as specified and as directed. |
| 37 | M & L for Form work to sides andsoffits of suspended slabs such as roof slabs, floor slabs, landings, chajjas and similar work; fair finished flat surfaces complete all as specified and as directed. |
| 38 | M&L forReinforced cement concrete(1:2:4)type B-1 using 20 mm graded stone aggregateas in slabs supported on walls,chajjas, beams, landings, deck slab and like any description and any position complete all as specified and as directed. |
| 39 | M&L for chequred cement concrete tiles of size 300x300mm,25 mm thickwith grey cement and pigments set, jointed and pointed in neat cement slurry in floors including screed bed 20 mm thickcement mortar (1:6)complete all as specified and as directed . |
| 40 | M&L for Hardcore of gauge notexc. 63 mm, deposited, spread and levelled in layers notexc. 15 cm thick,wateredand rammed to a true surface all as specified and as directed. |
| 41 | Dismantling of Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed. |
| 42 | S&F Strucural steel work of rolled sections (Beams, angles,channels,tees etc)as in main and cross beams ,hip and jack rafters; pulins where connected to common rafters and running rails ; fixed with angle cleats or other connectingplates including necessary cuting to dead lenghth(where required) notching, drilling, fitting,rivetting/welding or connecting with bolts and nutsat any location and at any height conforming to Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed. |
| 43 | S & F G l frame work for seamless ceiling comprising of G l perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complte all as specified and as dircected. |
| 44 | S & F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners complte all as specified and as dircected. |
| 45 | M & L for 12mm thick Perforated particle board/tiles for insulation and accoustic purposes, 60 x 60 cm in size, fixed with nails to timber frame work or with staples on snap grid complete all as specified and as dircected. |
| 46 | S &FPre- painted galvalume aluminum zinc coating, 150AZ, GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screwscomplete all as specified and as directed. |
| 47 | S &F Pre- painted galvalume aluminum zinc coating, 150AZ,GI based plainsteel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding/ridges towall, fixed with self tapping screwscomplete all as specified and as directed. |
| 48 | S & Fpowder coated aluminium frame for doors, windows, ventilators, powder coated of any color (tickness of powder coating not less than50 micron) with one or more rebates including cleat for fixing etc complete all as specified and directed |
| 49 | S&FPrelaminated particle board 18/19 mm thick , exterior grade, prelaminated both sides with decorative choice lamination, fixed with screws to timber frame work / shutterincluding necessary joining cleats, glazing clips, ruber neoprene packing, anodised aluminum snap beading, screws etc. complete all as specified |
| 50 | S&F Mortice lock2 lever, brass,vertical type, 100mm size complete all as specified and as directed. |
| 51 | S&FAluminium Door closer hydraulicallyregulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as dirceted. |
| 52 | M&L for Mild steel TMTbars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirallyfor hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 53 | M&L for mildsteelTMTbars 6 to 8 mm cut to length bend to shape require including cranking hooping ends binding in & wine annealed not less than 0.9 mm dia or securing with clips all as specified and as directed. |
| 54 | Surface excavation not exc 30cm and avg depth not exc 15cm in hard / dense soil all as specified and as directed. |
| 55 | M&L for preperation of old treated steel surfaces exc 10cm widthor girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 56 | M&L for Plain cement concrete (1:2:4) type B-0 using12.50 mm graded stone aggregate as in cills, base courses, copingsincluding necessary formwork complete all as specified and as directed. |
| 57 | S&F Powder coated aluminium ventilator partially fixed glazing and partially louvered glazing with the following items all as specified & directed :-(i) Aluminium frame section 45x25x1.8mm.(ii) Fixing arrangements lugs in hold fast in walls including PCC (1:3:6) making good distributed surfaces to match with the adjoining surfaces complete.(v) 4mm thick frosted glass (partially fixed glazing and Partially louvered glazing) and fixed with rubber gasket. |
| 58 | M&L for Preparation of old decorated wall surface and applying two coats of white wash including necessary scaffolding etc complete all as specified and as directed. |
| 59 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, bell, light fittings etc removing materials for taking credit (credit for above items should be made as per conditions seperately) and making good distrubed surfaces of wall, floors, etc., all as specified and as directed. |
| 60 | M&L for Point wiringwithPVC insulated FRLS unsheathed 1.5 sqmm single core cable 1100 volts grade with multistranded copper conductor conforming to IS-694 1990 with ISI marked (for phase, neutral and earth) drawn in and includingnon metalic rigid PVC conduit medium grade with ISI mark of minimum 20mm dia and all conduit accessories concealed including cutting / chases in wall /ceiling /fixed to roof /truss/columns etc and including factory made branded make embossed galavanised steel pressed modular terminal boxes alongwithmodular cover plates with frames fixing modular switches, sockets, regulators etc.of suitable size modules and earth wire to be connected to common earth dolly complete all as specified and directed for the following :- |
| 61 | One light point controlled by one modular switch 6 Amps one way |
| 62 | One Ceiling / Exahust fan point controlled by one modular switch 6 Amps |
| 63 | One 3 pin Point 6 Amps switch socket outlet point controlled by one switch on the same board with other switches |
| 64 | One 3 pin Point 6 Amps switch socket outlet point controlled by one switch on the independent board |
| 65 | Allas per item No 60 here-in-before but with2.5 sqmm size single core multistranded copper conductor cable for 3 pin 16 Amps Modular switch socket combination outlet on independent board with 2.5 sqmm FRLS insulated and unsheathed copper conductor as earth and connected to earth dolly. |
| 66 | S&FModular switch 1 way 6 Amps,1 module all as Specified and directed. |
| 67 | Supply and fixmodular switch 1 way 16Amps,1 module all as Specified and directed. |
| 68 | S&F Modular type shuttered socket outlet, 3 pin 6Amps230 volts 2 modules with ISI mark, Complete all as Specified and directed. |
| 69 | S&F Modular type shuttered socket outlet, 3 pin 6 /16 Amps, 230 volts 2 modules with ISI mark complete all as Specified and directed. |
| 70 | S & F Ceiling rose,PVC / polycarbonate, isolated body including supply and fix PVC square blocks complete all as Specified and directed. |
| 71 | S&F Stepped typeelectronic modularfanregulator 1-module , modular type 120W , 2 Module 230 Volts AC complete all as Specified and directed. |
| 72 | S&F in repairs LED tube light fitting of20 watts capacity, 6000K , 230 volt, withAluminium Extruded channel powder coated with diffuser for glare free light complete with all fixing accessories such as 2 nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed. |
| 73 | Supply and fix in repairsLED Light fitting of size 2\" x 2\", 34 watt capacityLED luminare with polymer diffuser complete with accessories suitable for armstrong/Grid ceiling with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. |
| 74 | S&F in repairsLED street light fitting 25 Watt capacity, 230 VoltAC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP 65/66 protection including connection up with twin core twisted flexible copper conductor cable with 1.5 M long suitable sizeall as specified and directed. |
| 75 | S&F Steet light bracket made out of 25 mm bore GI Light grade 1.00 M long to required shape as in bracket for steet light fittings fixed with two pair of MS flate iron clamp of size50mm X 6 mm thickness of required shape with nuts, bolts and washers suitable for steel tubular pole including painting of mild steel flate iron surface with two coates of synthetic enamel paint over a coat of red oxide primer complete including taking down unserviceable bracketall as specified and directed. |
| 76 | Supply and fix in repairsSub main wiring with 2 runs of 4 sqmmsingle core,FRLS insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in non metallicPVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4 sqmm single core PVC insulated & unsheathed copper conductor FRLS Cable as continuos earth wire dolly and connecting to existing main switch board / distribution board of the building and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed.(Note : Three run of 4sqmm cable and one run of conduit altogether measured as one unit) |
| 77 | Supply and fix in repairs Sub main wiring with 2 runs of 6.0 sqmm single coreFRLS insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in existing non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6 sqmm single core FRLS insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed. (Note : Three run of 6sqmm cable and one run of conduit altogether measured as one unit) |
| 78 | Supply and fix in repairs Sheet metal enclosure (ISI marked) distribution board TPN, 415 volts, 4 way horizontal type double door type, 200 Amps rated neutral copper bus bar for housing MCB and fixed and tested on completion complete all as specified & directed |
| 79 | S&F in repairsSheet metal enclosure (ISI marked) distribution board for 240 volts, SPN 12 way horizontal type,double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete all as specified & directed |
| 80 | Supply and fix in repairs MCB single pole 6 to 32 Amps 240 volts, C series, 10 kA rupturing capacity all as specified & directed |
| 81 | Supply and fix in repairs MCB single pole & neutral 32 Amps 240 volts, C series,10 kA rupturing capacity all as specified & directed |
| 82 | Supply and fix in repairsMCB Triple pole & neutral 40 to 100 Amps,415 volts, C series,10 kA rupturing capacity complete all as specified. |
| 83 | Taking down Ceiling / Exhaust fan,dismantling completely,cleaning all dust etcand spray painting one coat with synthetic enamel paint usingspray gun includingfittings, replacement of fan capacitor 2.5/3.15 MFD , canopy,bearing / bush, rubber bushes minor nuts bolts screws washers greasing in fan bearing, re-winding if necessaryand re-assembly, re-fixing on original position,connecting up with twin core cable of suitable size for ceiling rose to connector complete all as directed.(Note : Re-winding will be measured seperately) |
| 84 | M & L for Rewinding of Ceiling Fan 1200mm sweep with appropriate size of copper enamelled wire including varnishing ,heating with proper insulation complete and testing on completionall as specified and directed . |
| 85 | Supply, installation, testing and commissioning of wall mounted oscillating fan of 400 mmsweep size, 3-blade type, with motor, fan blade, guard, mounting bracket, oscillating mechanism, and 3-speed regulator, suitable for 230V, 50Hz, single-phase AC supply, ISI marked, approved make, powder-coated body, equipped with thermal overload protection, and capable of continuous operation with minimal noise, fixing on wall using anchor fasteners and GI support bracket including necessary minor civil works like drilling and finishing, flexible copper wiring from nearby point (up to 2 m length) testing, commissioning completionall as specified and directed . |
| 86 | Supply and fixing ceiling fan 1200 mm sweepwith blades, down rod, electronic regulator with remote and accessories, 230 Volts, min air delivery 210 CFM with service value 6 BEE, five star rated with brushless direct current (BLDC) motorcomplete all as specified and directed. (Note : Fan Rodwill be 1.5/2ft/3 ft long as per site requirementto the Anchor point using appropriate fastenerse.g U-hooks,or clevis and ensure the rod is vertically aligned and free from any bends or damage, all connections to avoid movement or vibrations). |
| 87 | S&FExhaust fan 300mm sweep,AC single phase 230 volts, heavy duty, metallic body with louvre shutter, including connecting up 3 core flexible copper wire 24/0.20 sqmm from ceiling rose to fan terminal etc complete all specified and as directed. (NOTE: Quoted rate deemed to be included for providing core cutting foropening in any type ofwalls in the building including neccessary plastering, grouting for making good to match with adjoining surface) |
| 88 | Excavation in trenches in soft / loose soil notexc 1.5 mtr wide and not exceeding 1.5 mtr depth for taking out or laying of under ground cables or erection of poles complete all as specified and as directed. |
| 89 | Returning, filling in, including spreading levelling and well ramming in layers not exc 25 cm thick with excavated soil complete all as directed. |
| 90 | Removing surplus soil to a distance not exc 50mtrs and depositing where directed at a level not exc 1.5 mtrs above the starting point complete all as specified and as directed. |
| 91 | M & L for Sandfilling in trenches obtained from local riverfor cushioning of UG cable all as per para 19.75 of SSR Part I as specified and directed . |
| 92 | Supply and lay common burnt bricks of sub class B laid breath wise across the length of cable in trenches for cable protection all as per para 19.75 of SSR Part I complete all asspecified and directed . |
| 93 | Supply, fixing ,teting and commissioning XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cablescross sectional area 35 Sqmm, 4 Core( heavy duty) with stranded aluminum conductor, 1100 Volt gradeall as specified and directed. |
| 94 | Supply, installation & commissioning of water cooler, electric driven Supply,partially stainless steel,single phase having approx storage 80litres capacity and nominal cooling capacity 40 litres per hour etccomplete all asspecified and directed . |
| 95 | Supply and fix in repairGun metal gate valve with iron wheel head screwed both ends for iron pipe 25 mm dia bore complete all asspecified and directed . |
| 96 | Supply and laying G Itubing 25mm dia bore medium grade with all fittings, laid in trenches complete all asspecified and directed . |
| 97 | Cutting of existing GI / DI Pipe and connecting the proposed pipe line with connected items all as specifoed and directed |
| 98 | M&L for Earthingwith galvanised steel earth plate electrode 60cm x 60cm x 6 mm thickburied directly in ground (earth pit depth not less than 2.25m deep below the ground level) with top edge of earth plate at a depth not less than 1.5m below ground level connected to earth using GI earth wire of 6mm dia by means ofof nuts, bolts and washer and check nuts of GI or steel as shown in electrical plate No.3 of MES SSR-2009 (Part-I) and connected to earth test point including testing on completion with and including 15mm bore light grade GI protection pipe 7.5 metre long for earth including PCC (1:2:4) pit with RCC (1:2:4) type B-1 cover, 40mm thick reinforced with 8mm TMTbars @ 100mm both ways with lifting hooks made out of 6mm dia MS bars, watering arrangement with 20mm dia light grade pipe, funnel, wire mesh, common salt chorcoal, necessary excavation and earth work in any type of soil complete all as specified & directed. |
