|
| 1 | Taking down cement plaster of any description including racking out joints, hacking for key scrubbing down with water etcandremoval of entire debris as ordered outside MD land complete all as directed. |
| 2 | M&L for 15mm thick renderingin cementmortar 1:4 on stone masonrysurfaces or surfaceother than fair face of brick work of walls mixed with water proofing compound (ISI marked) @ 3% by weight of cement or as per manufacturer’s instructions, finished even & smooth without using extra cement, complete all as specified.Note : - Supply only water proofing compound shall be measured and paid for separately |
| 3 | M&L for rendering 15 mm thick in CM 1:6 on brick or concrete surfaces or surface other than fair faces brick work, finished even and smooth without using extra cement complete all as specified. |
| 4 | M&L for rendering 10 mm thick in CM 1:3 on ceiling surface, finished the surface even and smooth without using extra cement completeall as directed. |
| 5 | Supply onlyIntegral Water Proofing Compound (ISI Marked) of Make : CICO,Acco Proof, Impermo, Aqua flex as approved. |
| 6 | Providingandapplying 1-2 mm thick Birla white cement based wall careputtyon plastered surface of ceiling / walls preparedthe surface even & smooth to the satisfaction ofEngineer-in-charge . |
| 7 | M&L preparing new plastered wall surfaces by rubbing, scrappingby hand held sander / long handle sander and washingand applying two coats Oil bound distemperby mechanical means / auto roller appliedover a coat of alkali resistant primer complete all as directed. |
| 8 | All as per item No 7 here-in-above but two coats on ceiling -do- |
| 9 | M&L Preparation of old surfaces of wall including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc by hand held sander / long handle sander including cornices, pilasters etc (Plastered or unplastered surfaces) and applying one coat of white wash complete all as directed. |
| 10 | All as per item No 9 here-in-above but two coats-do- |
| 11 | All as per item No 9 here-in-above but one coat on ceiling -do- |
| 12 | M&L for preparation of old decorative surfaces of wall including, cornices (plastered or unplastered)of any description, rubbing, scrappingby hand held sander / long handle sander and washing and applying one coat of oil bound distemper by mechanicalmeans / auto rollerincluding filing undulations with white cement based putty mixed with multi purpose mixer complete all as directed. |
| 13 | All as per item No 12 here-in-above but two coats-do- |
| 14 | All as per item No 12 here-in-above but one coat on ceiling -do- |
| 15 | M&L for preparation of old decorative surfaces of wall including, cornices (plastered or unplastered)of any description, rubbing, scrappingby hand held sander / long handle sander and washing and applying one coat of cement base paint by mechanicalmeans / auto roller complete all as directed. |
| 16 | M&L complete removal of existing any type of treatment on surface of walls of any description, rubbing, scrappingby hand held sander / long handle sander and Jet pressure washing and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resisitance as per IS 15489:2004, alkali & fungal resistance dirt resistance exterior paint (Apex -Ultima Protek) of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over newsurfaces applied by mechanicalmeans i.e Airless spray including filing undulations with 1 - 2 mm thick white cement based putty mixed with multi purpose mixer complete all as directed. |
| 17 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces etc complete ll as directed. |
| 18 | M&L preparation of old painted wooden surfaces exc 10 cm width or girth all as specified in SSR Part-I and applying one coat of Ist quality synthetic enamel paint, complete all as directed. |
| 19 | All same as per itemNo 18 here-in-above but on steel surface -do- |
| 20 | Removing complete shrubs/ vegetation upto root grown in any description such as grown in wall/ beam / roof /chajja etc in height up to three storeybuilding including filling the holes where the shurbs removed with cement concrete 1:2:4 type B-0 (12.5mm graded stone aggregate) of minimum size 15cm x15cm x 15cm or as requiredand making good the distured surface as per its original specification to the satisfaction Engineer-in-charge& removal of the taken out shurbs out ofMD land and disposed complete allas directed.Note for Periodicalitems : Note: 1. For measurement purposes in respect of those building for which audited periodical services measurement book are available, quantities shall be taken from PSMBs direct and entered in measurement book (IAFW-2261) and in respect of those buiidings for which audited PSMBs are not available, detailed measurements of works shall be taken and entered in measurement book in the usual manner.2. Any fittings or fixtures disturbed or damaged during the progress of work, will either be rectified or replaced by the contractor himself without any delay and at no extra cost to the Govt.3. Prior approval of colour shade/ tint is mandatory from GE (Central) Bangalore before commencement of work.4. The quoted rate aganist various items of above Schedule is deemed tobe inclusive of prepration of surface with Hand held sander / long handle sander, cleaning the wall/ ceiling surface with jet pressure washer, mixing putty with multipurpose mixer, appying Anti fungal paint with Airless spray appliance, and applying distemper & Plastic emulsion with Mechinal means / Auto roller as ordered. Engineer-in-Charge should ensure that Contractor\"s are obtained prior approvalof cleaning & application items before commencement of perodical work. |
