Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolition of unreinforced concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) and disposed off from site complete all as specified and as directed. |
| 2 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 3 | Demolition of cement concrete reinforced of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 4 | Dismantling floor, hearth or wall tiling including cement mortar bedding but (not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 5 | Demolition of brickwork or stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed. |
| 6 | Dismantling of Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and as directed. |
| 7 | S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 8 | S & F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 9 | M & L chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment including 15mm thick cement screed bed in CM 1:6 complete all as specified and as directed. |
| 10 | Taking down Chowkhats or frames with shutters (without taking off shutters from frames) exc 1.5 Sqm but n.exc 4 Sqm each including making good disturbed surfaces complete all as specified and as directed. |
| 11 | All as per item No 10 here in before but n.exc 1.5 Sqm each complete all as specified and as directed. |
| 12 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 13 | M & L for glazed ceramic coloured joint free tiles in vertical surfaces, 350 x 250 x 7mm or 450 x 350 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement including cement screed 10mm thick in CM 1:3 complete all as specified and as directed. |
| 14 | M & L for 25mm thick Cement concrete type B-1,1:2:4 (20mm graded aggregate) as in levelling course complete all as specified and as directed. |
| 15 | M & L Non skid ceramic coloured joint free tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 16 | M & L Non skid ceramic coloured joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 17 | All as per item no.16 here in before but in vertical surfaces as in skirtings including screed backing coat 10mm thick in CM 1:3 complete all as specified and as directed. |
| 18 | M & L Vitrified ceramic coloured tiles 10mm thick (square/ rectangular) polished, area of each tile n.exc 0.36 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 19 | All as per item no.18 here in before but in vertical surfaces as in skirtings including screed bed 10mm thick in CM 1:3 complete all as specified and as directed. |
| 20 | M & L for Machine cut Kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 21 | M & L Rendering 10mm thick on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement in CM 1:4 with liquid water proofing liquid as per manufacturers instructions on sunken slab of toilets.(Note:- Water proofing and LW+measured and paid separately) |
| 22 | M & L APP based polymeric membrane minimum weighing 3.80kg/sqm and minimum 3mm thick reinforced with polyester non wove fabric (weight not less than 150gms/sqm) land on primed surface by forced application complete including taking down existing water proof membrane, cement screed, concrete surfaces (or) mud-puska of any type and any thickness etc. and removal of debris obtained from removal of existing roofing including mtrl including screed mtrl as specified herein and deposited to the locations all as specified and directed . The laying of water proofing treatment shall be as per the Guide lines given in SSR/Zonal specification (latest) complete all as specified and as directed. |
| 23 | Plain cement concrete Type E-2 1:5:10 (40 mm graded aggregate) in foundations, filling and mass concrete |
| 24 | M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment or mat complete all as specified and as directed. |
| 25 | M & L for Rounding to edges of Granite/ stone slabs one edge such as in steps, cooking platforms, window cills and other similar situations complete all as specified and as directed. |
| 26 | Cutting out bricks, forming toothing for and bonding new into old work including value of new materials entering old walls and jointing and pointing in CM 1:6 complete all as specified and as directed.(measured on vertical face in contact with old wall only). |
| 27 | M & L for old size Brick work with fly ash bricks straight or curved on plan and 6 metre mean radius built in CM 1:6 complete all as specified and as directed. |
| 28 | S & F Framed work such as grills, gratings etc., with ends of bar shouldered forged into spikes framed guard bars and similar work conforming to fe-290 gde E-165 complete all as specified and as directed. |
| 29 | S & F Anodised aluminium (minimum 50 micron) frame for doors, windows, ventilators and grills/guard bars etc. with one or more rebates including joining cleat for fixing etc., complete all as specified and as directed. |
| 30 | S& F Anodised aluminium window and ventilator shutters, sliding type/ side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. anodised alum fittings such as peg stays, handles complete all as specified and as directed. |
| 31 | S & F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 32 | S & F Sheet glass 4mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane and fixed to aluminium frame using rubber packing complete all as specified and as directed. |
| 33 | S & F Figured glass, pin head type 4mm thick, and glazing with oil putty in square n.exc 0.5 sqm in each pane and fixed to aluminium frame using rubber packing complete all as specified and as directed. |
| 34 | S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.(M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).®Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 35 | S & F for Providing and fixing factory made single extruded WPC (Wood Polymer composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed.(Note:- stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 36 | S & F factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weatherproof silicon sealent over backer rod of required size and of approved quality, complete all as specified and as directed. (Glass or wire mesh shall be paid separately)Note:- For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made |
| 37 | S & F factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately).Note:- For UPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 38 | S & F factory made uPVC white colour Casement door with 3D hinges and mortice lock arrangement made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in- Charge. (Glass shall be paid separately) Note:- For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 39 | M & L for II nd class hardwood plain, solid, straight Chowkhat and frames, wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed. |
| 40 | S & F 35mm thick factory made flush shutters, solid core construction with particle board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 41 | S & F 35mm thick factory made 2nd class HW rail and style plain framed panelled shutter two panels with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces complete all as specified and as directed. |
| 42 | S & F Second class hardwood 35mm thick glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze etc., without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and supplied and fitted to Chowkhat. |
| 43 | S & F 19mm thick prelaminated particle board cub board shutters exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work both sides including 6mm thick teak wood edging alround the shutters complete all as specified and as directed. |
| 44 | All as per item no.43 here in before but both sides with decorative choice laminations as in kitchen cabinet shutter and partitions complete all as specified and as directed. |
| 45 | M & L for II nd class hardwood plain fillets square, rectangular in section wrought fixed with screws of sec area exc 6 & n.exc 13 sq.cm complete all as specified and as directed. |
| 46 | S & F 30mm width of flaps continuous piano hinges stainless steel fixed to cub board shutters complete all as specified and as directed. |
| 47 | S & F 100mm size mild steel butt hinges, medium weight, cold rolled fixed with stainless steel screw with frame complete all as specified and as directed. |
| 48 | S & F 75mm size mild steel butt hinges, medium weight, cold rolled fixed with stainless steel screw with frame complete all as specified and as directed. |
| 49 | S & F Aluminium anodised barrel tower bolts of extruded section 200mm size complete all as specified and as directed. |
| 50 | S & F Aluminium anodised barrel tower bolts of extruded section 125mm size complete all as specified and as directed. |
| 51 | S & F Extruded aluminium alloy handles, fabricated type, anodised 150mm long complete all as specified and as directed. |
| 52 | S & F Extruded aluminium alloy handles, fabricated type, anodised 125mm long complete all as specified and as directed. |
| 53 | S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed. |
| 54 | S& F 100mm size stainless steel decorative coated handles suitable for Cabinet / ward robe shutters complete all as specified and as directed. |
| 55 | M & L for Modular kitchen cupboards unit using 18mm thick BWP plywood carcass and shutter covered with 8mm laminated and 1mm edge band all round and shutters covered with 1mm laminated and 1mm edge band all round and cullery basket 19\" x 20\" x 4\" plain basket 19\" x 20\" x 6\", Thali basket 19\" x 20\" x 8\" soft close hinges & Telescopic channel (soft close hinges & Telescopic channel) including door handle and exhaust grill complete all as specified and as directed. |
| 56 | S& F 100mm size stainless steel decorative coated hasp and staple type suitable for Cabinet/ ward robe shutters complete all as specified and as directed. |
| 57 | M & L RCC nominal mix 1:2:4 type B-1 using 20mm graded aggregate as in slabs supported on walls, beams etc., complete all as specified and as directed. |
| 58 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work including sides of slab, n.exc 200mm thick (Horizontal or sloping) for flat rough finished surfaces of concrete complete all as specified and as directed. |
| 59 | M & L providing precast cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in cover slabs, shelves and set in cement mortar 1:4 complete with joints to match complete all as specified and as directed.Note:- Reinforcement shall be measured and paid separately. |
| 60 | S & F mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required including cranking, hooking ends and binding with MS wire annealed not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 61 | S & F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and as directed. |
| 62 | Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1 : 3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring etc., in brick walls and making good, cutting exc 10cm but n.exc 20cm girth complete all as specified and as directed. |
| 63 | S & F Vitreous china wash down water closet (pedestal pattern), white, of style and pattern as existing, complete with and including providing plastic seat cover, white fixed complete all as specified and as directed.(Make:- Hindware/ Parryware) |
| 64 | S & F Chromium plated health faucet with CP connection and hook fixed complete all as specified and as directed. |
| 65 | S & F PVC valveless syphonic action type, flushing cistern, low level, white, 10 ltrs, with inlet ball valve, float, handle and flush pipe including. brackets including 32mm dia flush pipe complete all as specified and as directed. |
| 66 | S & F Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets cutting for and pinning in ends of brackets or erecting or fixing of supply and waste pipe complete all as specified and as directed. |
| 67 | S & F brass chromium plated 32mm bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed. |
| 68 | S & F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 69 | S & F low density 32mm dia bore polythene waste pipe (LDPE) of pressure rating 6 Kgf /Cm2 complete all as specified and as directed. |
| 70 | S & F Pillar taps 15mm bore cast copper alloy with capstan heads chromium plated, fancy type, screwed down high pressure with or without lettered \"hot\" or \"cold\" with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed. |
| 71 | S & F in repairs Bib taps 15mm bore cast copper alloy with crutch or butter fly handle chromium plated screwed down for iron pipe or for brass ferrule fixed complete all as specified and as directed. |
| 72 | S & F in repairs 450 x 600mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with CP brass screws and cup washers fixing complete all as specified and as directed. |
| 73 | S & F in repair stop valves15mm bore chromium plated with long shank and cup (Concealed type) high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 74 | S & F Brass chromium plated, tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed. |
| 75 | S & F in repairs 3 in 1 wall mixer with provision of both hand shower and over head shower complete all as specified and as directed. |
| 76 | S & F 5mm thick Glass shelves for bath room corner set of three (10\",8\",6\") complete all as specified and as directed. |
| 77 | M & L toilet paper holder brass chromium plated as in repair complete all as specified and as directed. |
| 78 | S& F stainless steel peg set of 5 complete all as specified and as directed. |
| 79 | Demolition and breaking up drain pipes any type set in cement mortar complete all as specified and as directed. |
| 80 | S & F PVC (SWR) pipes single socketed, in any length with rubber ring joints or solvent cement, laid in floor , 75mm bore complete all as specified and as directed. |
| 81 | S & F PVC (SWR) pipes single socketed, in any length with rubber ring joints or solvent cement, fixed to walls, 75mm bore complete all as specified and as directed. |
| 82 | S & F PVC (SWR) pipes single socketed, in any length with rubber ring joints or solvent cement, laid in floors, 110mm bore complete all as specified and as directed. |
| 83 | S & F PVC (SWR) pipes single socketed, in any length with rubber ring joints or solvent cement, fixed to walls, 110mm bore complete all as specified and as directed. |
| 84 | S & F PVC (SWR) bend 110mm bore complete all as specified and as directed. |
| 85 | S & F PVC (SWR) floor trap with grating including jointing to solvent cement waste pipe 75mm dia complete all as specified and as directed. |
| 86 | S & F PVC (SWR) Gully trap 125 / 110mm setting and jointing with solvent cement complete all as specified and as directed. |
| 87 | S & F PVC (SWR) vent cowl 110mm complete all as specified and as directed. |
| 88 | S & F PVC (SWR) junction single, (Single T) equal or unequal for 110 mm bore pipe with access door complete all as specified and as directed. |
| 89 | S & F PVC (SWR) junction single, (Single T) equal or unequal for 75 mm bore pipe with access door complete all as specified and as directed. |
| 90 | S & F PVC (SWR) bend 75 mm bore complete all as specified and as directed. |
| 91 | Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and as directed. |
| 92 | S & F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof Bore of pipe 110mm complete all as specified and as directed. |
| 93 | S & F in repairs rotationally moulded polyethylene water storage tanks of capacity 1000 litres (cylindrical, vertical with closed top) hoisted and fixed in position all as specified including taking down old tanks complete all as specified and as directed. |
| 94 | S & F Ball valves 25 mm high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and as directed.(Minimum weight 15mm-142gms/ 20mm-210 gms/ 25mm-455gms/ 40mm-690gms) |
| 95 | S & F in repairs 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 96 | S & F in repairs 50mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 97 | Taking up or taking down steel/iron tube of 20 mm bore and connections including cleaning for refixing or removal to store complete all as specified and as directed. |
| 98 | Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings laid in walls/ floors complete all as specified and as directed. |
| 99 | Taking up or taking down steel/ iron tube of 25mm bore and connections including cleaning for refixing or removal to store complete all as specified and as directed. |
| 100 | Supplying and laying of 25mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings laid in walls/ floors complete all as specified and as directed. |
| 101 | Taking up or taking down steel/iron tube of 50mm bore and connections including cleaning for refixing or removal to store complete all as specified and as directed. |
| 102 | Supplying and laying of 50mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings laid in walls/ floors complete all as specified and as directed. |
| 103 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed. |
| 104 | M & L for Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement on internal wall surfaces complete all as specified and as directed. |
| 105 | M & L for Rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement on ceiling surfaces complete all as specified and as directed. |
| 106 | M & L for rendering 10mm thick in CM 1: 6 as under layer and 5mm thick in CM 1:4 mixed with water proofing compound as finishing layer to external wall surfaces and finishing the surface even and smooth including taking down existing cement plaster if necessary complete all as specified and as directed. |
| 107 | Supply only integral liquid water proofing compound. |
| 108 | Complete removal of existing treatment on walls and applying two coats of oil bound distemper over a coat of primer over 3mm thick wall care putty to internal wall surfaces complete all as specified and as directed. |
| 109 | Complete removal of existing treatment on walls and applying two coats of oil bound distemper over a coat of primer on ceiling surfaces complete all as specified and as directed. |
| 110 | Preparing new plastered wall surfaces and applying two coat of oil bound distemper over a coat of primer complete all as specified and as directed. |
| 111 | Preparing new plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed. |
| 112 | Complete removal of existing treatment on walls and applying two coats of exterior weather proof paint over a coat of weather proof primer to all external wall surfaces complete all as specified and as directed. |
| 113 | M & L for preparation of new steel surfaces over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 114 | M & L for preparation of new wooden surfaces over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 115 | M & L for preparation of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 116 | M & L for preparation of old steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 117 | M & L for 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection & paving finished even and smooth without using extra cement complete all as specified and as directed. |
| 118 | Removing the existing roof treatment of any description completely and brushing the cleaned surfaces of concrete with neat cement slurry @ 3Kgs of cement per sqm remove all the debris from site and rubbish off the premises complete all as specified and as directed. |
| 119 | M & L 25mm average thick, PCC 1:2:4 type B0 using 12.50 mm graded stone aggregate as in levelling course over the roof slab complete all as specified and as directed. |
| 120 | M & L 10mm thick cement plaster in CM 1:3, mixed with water proofing compound over the levelling course while the concrete is green, finished even and smooth without using extra cement complete all as specified and as directed.Note:- WPC shall be measured and paid separately. |
| 121 | M & L for APP Modified prefabricated five layer water proofing membrane, not less than 3mm thick and weighing not less than 4.50 kg/sqm reinforced with non woven polyester matt black finished over compatible primer @ 0.3 Ltrs per sqm, torching the membrane on whole surface uniformly while unrolling the membrane by LPG and sealed with trowel after necessary preparation of surface complete all as per manufactures instructions and finally finished with a coat of bit mastic aluminium paint over a coat of blown bitumen 85/25 grade @ 1.20Kg/Sqm over the membrane. The Overlap joint shall be provided of 75mm in longitudinal direction and 100mm in transverse direction respectively. All the angles, abutments and the drainage outlets shall be sealed with extra care to ensure full bondage.Manufacturers:- STP/ IWL India Ltd / SAPL (ARGO-P) / Hydrotech Limited (Hydroflame) Note:- The work shall be carried out by authorized applicators of manufacturers |
| 122 | M & L RCC nominal mix 1:2:4 type B-1 using 20mm graded aggregate as in Columns etc., complete all as specified and as directed. |
| 123 | Use and waste of formwork to sides of Columns for flat fair finished surfaces of concrete complete all as specified and as directed. |
| 124 | S & F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, hooking ends and binding with MS wire annealed not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 125 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc., complete all as specified and as directed. |
| 126 | M & L for Wiring complete with 1.5sqmm single core PVC insulated unsheathed FRLSH cable 1100 volts grade, multistranded with copper conductors conforming to IS specifications, drawn through and including non metallic rigid PVC conduit, PVC conduit fittings and conduit accessories or casing capings including accessories fixed on wall / ceiling or concealed on wall, making good disturbed surfaces of walls and fixed on ceiling etc. With suitable clamps, screws, etc. or concealed in wall including terminal boxes fabricated with 1.6mm MS sheet concealed in walls covered with plastic laminated sheet top cover 3mm thick fixed with cadmium plated iron screws for housing the switches, switch sockets outlets, fan regulators, etc., including provn of 1.5sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity conductor and connecting to common earth dolly complete all as specified and as directed:- |
| 127 | One light point controlled by one switch. |
| 128 | One fan point controlled by one switch. |
| 129 | One Exhaust fan point controlled by one switch. |
| 130 | One 3 pin 5 amps switch socket on same board along with other switches. |
| 131 | One 3 pin 5 Amps switch socket on independent board. |
| 132 | One bell point controlled by bell push switch on independent board. |
| 133 | All as per item No.2 here in before but with 4Sqmm single core PVC cable for one 3 pin 15amps switch socket outlet on independent board complete all as specified and as directed. |
| 134 | Taking down sub main wiring (or)power wiring complete upto2 runs of 6 Sqmm in PVC conduit removing to stores or taken as credit and making good the disturbed surfaces of wall, etc. complete all as specified and as directed. |
| 135 | M & L for sub main wiring with PVC insulated, 1100 volts grade single core FRLSH multistranded copper conductor cable conforming to IS specifications, 2 runs of 10 sqmm including one run of 10 sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor with colour code drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories or casing capping including accessories fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dolly including taking down old unserviceable complete all as specified and as directed. |
| 136 | M & L for sub main wiring with PVC insulated, 1100 volts grade single core FRLSH multistranded copper conductor cable conforming to IS specifications, 2 runs of 6sqmm including one run of 6sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor drawn through and including one run of 25mm dia rigid PVC conduit and conduit accessories including accessories fixed on wall/ceiling etc., or concealed in wall, making good disturbed surfaces on walls and connecting to common earth dolly complete all as specified and as directed. |
| 137 | S & F in repairs Modular Switch Roma flush DIRECT TO FIT press type 10amps single pole, one way, 240 Volts all as per site requirement complete all as specified and as directed. |
| 138 | S & F in repairs Modular Switch Roma flush DIRECT TO FIT press type 16/20 amps single pole, one way, 240 Volts all as per site requirement complete all as specified and as directed. |
| 139 | S & F in repairs Modular Socket Roma flush DIRECT TO FIT press type 10 amps single pole, one way, 240 Volts all as per site requirement complete all as specified and as directed. |
| 140 | S & F in repairs Modular Socket Roma flush DIRECT TO FIT press type 16/20 amps single pole, one way, 240 Volts all as per site requirement complete all as specified and as directed. |
| 141 | S & F in repairs Modular Fan step regulator, 120W - 1 module for ceiling Fan of 1200 mm sweep all as specified and as directed. |
| 142 | S & F in repairs Modular white cover with plate with frame 2 module including matching with white cement work if necessary complete all as specified and as directed. |
| 143 | S & F in repairs Modular white cover with plate with frame 3 module including matching with white cement work if necessary complete all as specified and as directed. |
| 144 | S & F in repairs Modular white cover with plate with frame 4 module including matching with white cement work if necessary complete all as specified and as directed. |
| 145 | S & F in repairs Modular white cover with plate with frame 6 module including matching with white cement work if necessary complete all as specified and as directed. |
| 146 | S & F in repairs Modular white cover with plate with frame 8 module including matching with white cement work if necessary complete all as specified and as directed. |
| 147 | S & F in repairs Modular flush box 1/2 module |
| 148 | S & F in repairs Modular flush box 3 module |
| 149 | S & F in repairs Modular flush box 4 module |
| 150 | S & F in repairs Modular flush box 6 module |
| 151 | S & F 30W bldg security light fitting including suitable GI bracket and clamps nuts etc. with best in class design and robust heat sink along with class leading IP, and surge protections for long lasting performance including taking down old unserviceable light fitting complete all as specified and as directed.Make:- Havells Cat No-LHETAVU7PA70030/ Bajaj Cat No-BCLST 30W LED/ Crompton Greaves Astra Neo Cat No-LSTS-30-CDL/NL-M |
| 152 | S & F replacement of modular clad socket single pole and neutral enclosure with a two pin and earth plug top and socket complete with one single pole MCB 230 Volts 20/32 Amps complete all as specified and as directed. |
| 153 | S & F round shape 10/12 watt 220 volts AC surface type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 154 | S & F in repairs MCCB Distribution board, TP&N , vertical , double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link,415 Volts 4 way fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete including 4 Pole V-Tec MCCB of 100 A rating & 16kA breaking capacity, MCCB pre-fitted at factory complete all as specified and as directed.Make:- C&S/ Legrand/ ABB |
| 155 | S & F in repairs MCCB four pole, 415 Volt, 63 Amps, 16 KA, adjustable thermal & fixed magnetic setting complete all as specified and directed.Make:- Havells/ L&T/ Legrand/ ABB. |
| 156 | S & F in repairs MCB SP, 240 Volt, 6-32 Amps, 10 kA rupturing capacity \"C\" series complete all as specified and directed including taking down old one complete all as specified and as directed.Make:- Havells/ L&T/ Legrand/ ABB. |
| 157 | S & F in repairs 40W LED aluminium battens high wattage decorative ultra slim polycarbonate LED lighting fixture with high lumen output, environmental friendly, energy efficient complete all as specified and as directed.Make:- Havells Cat No LED Pride plus LHEXACP7IN1J040/ Bajaj Cat No BPTX 40W LED 4F WH/ Crompton Greaves Cat No.CCS-100-40-65-HL2-DP-NWH |
| 158 | S & F in repairs 10W LED battens decorative ultra slim square profile LED lighting fixture with extruded polycarbonate environmental friendly energy efficient complete all as specified and as directed.Make:- Havells Cat No LED Pride Plus LHEXACP5IN1W010/ Bajaj cat No BCLSB 10 WH or equivalent |
| 159 | S & F decorative wall mounting brushed nickel finish fixture with opel glass diffuser suitable with 9W LED lamp B22 base including taking down old unserviceable light fitting complete all as specified and as directed.Make:- Havells Cat No LHFOAJE1TZ11060 or equivalent |
| 160 | Taking down old ceiling fan/ Exhaust fan/ geyser and kept in MES store complete all as specified and as directed. |
| 161 | S & F in repairs/ replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and as directed. |
| 162 | S & F in repairs/ replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 200mm complete all as specified and as directed. |
| 163 | S & F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed. |
| 164 | S & F electric water heater storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat NRV, connection piece etc., complete all as specified and as directed. |
| 165 | Earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick buried directly in ground vertically to a depth of not less than 2.25 mtr below normal ground level with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised iron/steel earth wire 4 mm dia by means of bolts, nuts, washers and check nuts made out of galvanised iron, protected by GI pipe light grade 15 mm bore dia and connected to main control board all as shown in Electrical plate No.3 of MES SSR Part I including necessary excavation and earth work in any type of soil, salt, charcoal dust, PCC 1:2:4 type B1 in chamber, RCC 1:2:4 chamber cover with 6 mm dia MS bar at 100 mm centre to centre both ways and MS 6 mm dia hook complete all as specified and as directed. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
