|
| 1 | Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below.(ii) Amount of Schedule of credit shall be deducted offline |
| 2 | Taking down shutters of any description and re-fixing in the same opening of area exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed. |
| 3 | Dismantling carefully of existing Kota stone flooring/ tiles of any size and thickness, laid, bedded in cement mortar including cleaning of old screed bed and slurry and making stone slab/ tiles serviceable for refixing complete all as specified and directed. |
| 4 | Demolition of cement concrete in ground floor (unreinforced) and paving n exc 15 cm thick (below or above GL) including tiling if any complete all as specified and directed. |
| 5 | Excavation over areas n exc 1.5 m deep and getting out in hard/ dense soil complete all as specified and directed. |
| 6 | M&L for hardcore of broken stone or boulders of gauge n exc 63 mm, deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed. |
| 7 | M&L for cement concrete 1:4:8 type B-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 8 | Removal of surplus soil obtained from excavation to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed. |
| 9 | M&L for drilling holes for re-barring mild steel TMT bars 6 to 8 mm dia upto 80 mm depth in existing plinth beams using chemical Hilti HY 200 R or equivalent make as approved by GE complete all as specified and directed. |
| 10 | M&L for mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape as required including cranking, bending spirally for hooping for columns, hookings ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 11 | M&L for reinforced cement concrete (Design mix) M-25 as in floor slabs and the like complete all as specified and directed. |
| 12 | Taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water of any description complete all as specified and directed. |
| 13 | M&L for 15 mm thick rendering in cement mortar 1:6 on any face of brick or concrete surface, finished even and smooth without using extra cement complete all as specified and directed. |
| 14 | M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of wall primer complete all as specified and directed. |
| 15 | M&L for acid resistant vitrious ceramic unglazed tiles 15 mm thick (square/ rectangular), area of each tiles exceeding 0.36 Sqm but not exceeding 1.00 sqm as in floors etc; set, jointed and pointed in chemical resistant mortar (resin type) over and including 15 mm thick screed bed in CM (1:6) and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed. |
| 16 | Refixing of old retrieved tiles of any description as in floors with and including M&L for setting, jointing and pointing tiles in chemical resistant mortar (resin type) over and including 15 mm thick screed bed in CM (1:6) and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed. |
| 17 | M&L for acid resistant vitreous ceramic unglazed tiles 15 mm thick (square/ rectangular), area of each tiles exceeding 0.36 Sqm but not exceeding 1.00 sqm as in skirting etc; set, jointed and pointed in chemical resistant mortar (resin type) over and including 10 mm thick rendering in CM (1:4) and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed. |
| 18 | M&L for 18-20 mm thick machine cut kota stone slab flooring over and including 20 mm thick cement screed base in CM 1:6; laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed. |
| 19 | Refixing old retrieved Kota stone at any location as in flooring over and including M&L for providing 20 mm thick cement screed bedding in CM 1:6 including grinding and mirror polishing to achieve required finish complete all as specified and directed. |
| 20 | Refixing old retrieved Kota stone at any location as in skirting over and including M&L for providing 10 mm thick rendering in CM 1:4 including grinding and mirror polishing to achieve required finish complete all as specified and directed. |
| 21 | Complete removal of existing treatment of walls with and including M&L for preparation and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS:15489:2004, alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. |
| 22 | Complete removal of existing treatment of walls with and including M&L for preparation and applying two coats of oil bound distemper complete all as specified and directed. |
| 23 | M&L for applying a coat of 2 mm thick white wall care cement based water proof putty in two layers on walls/ ceiling, finshed even and smooth complete all as specified and directed. |
| 24 | M&L for preparation of old surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 25 | M&L for preparation of old steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 26 | M&L for preparation of old wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 27 | Deduct schedule of credit (calculation will be done off line)Rs. 14020.00 |
