|
| 1 | Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but n.exc 4 sqm each, complete all as specified & directed. |
| 2 | S&F anodized 50 micron powder coated aluminium door shutters,with frame of section 100x44x1.60 to1.8 mm thick, aluminium sections for shutter anodised aluminum powder coated shutter, Glazing shall be of 4.8 mm thick sheet, fixed with rubber gasket and aluminum glazing clips, section of aluminum shutter of following sizes:-(i) Styles 85 x 44.45 x 3 mm thick section No- 4526(ii) Top rail 95.25 x 44.45 x 1.7 mm thick section No-4553(iii) Middle/lock rail 83.50 x 44.45 x 1.7 mm thick section No-4565(iv) Bottom rail 114.3 x 44.45 x 2.82 mm thick section No-4529(v) Glazing clip 0.70 mm thick section N0-4407 all as directed (vi) Handle: Aluminum handle 100mm girth and as per sample(vii) Tower bolt: 9.90 mm dia sheet and section Ano-4002 7, 200 mm long(viii) Mortic lock: 100 mm size 4 lever. |
| 3 | S&F for powder coated alumium glazed window shutter sliding type using 1.80 mm thick aluminium open three track section having size of style & top rails 83x44mm, bottom rails 100x44mm including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading screws, anodisedaluminium fittings complete and including glazingby using 5mm thick plain sheet glass and stainless steel wire mess of dia 0.36mm and aperture 1.4mm, complete all as specified and as directed. ((Note-glazed shutters glass thickness not less than 5.00 MM and wiremess shutter with SS wiremesh as approved by GE is also included. No extra payment will be made separately) |
| 4 | S&F for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws , including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge |
| 5 | S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top,bottom and sides partition Glazing shall be of 4.8 mm thick sheet /board required EPDM rubber/ neoprene gasket. |
| 6 | Rougheningsurfacesofoldconcretefloorbypicking,sweepingcleanand washingdownwithwatertoremovedust, etc complete all as specified & directed. |
| 7 | M&L for 25mm thick Cement concrete type B-1,1:2:4 (20mm gradedaggregate) as in levelling course in floors etc complete all as specified & directed. |
| 8 | M&L for Virified Ceramic light shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including Screed bed or bedding layer of mortar 15 mm thick in Cm 1: 6 for laying floor finishes complete all as specified & directed. |
| 9 | All as per description of serial item No 8 above but onvertical surface over & Including Screed bed or bedding layer of mortar 10 mm thick in Cm 1: 4 complete all as specified & directed. |
| 10 | M&L false ceiling with 4 mm thick E-board white prelaminated set embossed reinforced designer ceiling board of approved texure fixed with GI imposed grid frame work of size not more than 600 x 600 mm having 24 mm wide T- section, runner made of 0.33 mm GI sheet and angle made of 0.45 mm GI sheet, suspended with 2 mm dia GI wire complete all as specified and directed. |
| 11 | Taking down cement plaster or cement lime plaster on PCC / stone surface / brick surfaces including raking out joints hacking for key scrubbing down with water etc, complete all as specified and directed. |
| 12 | M&L for rendering 15 mm thick in cement mortar 1:6 onfair face of brick work of walls, finished even & smooth without using extra cement,complete all as specified and directed. |
| 13 | M&L for rendering 15 mm thick in cement mortar 1:4 onfair face of brick work of walls finished even & smooth without using extra cement complete all as specified and directed. |
| 14 | M&L for Preparing of new plastered surface of wall and applying two coats of Oil emulsion distemper (OBD) of approved shade / tint over a coat of primer over a coat of min 1 mm thick putty complete, all as specified and directed. |
| 15 | M & L for applying Two coats of Plastic emulssion paint including primer on surfaces of wall of any description over 10cm width or girth, not otherwise described complete all as specified and directed. Note :- Plastic Emulsion Paint and primer of same manufacturer to be applied through mechanical means only. |
| 16 | M&L for complete removal of existing treatment of surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/ tint, complete all as specified and directed. |
| 17 | M&L for Complete removal of exiting treatment and applying two coatsof oil bound distemper over one coat of wall care putty of wall incl preparation all as specified and directed. |
| 18 | Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over a coat of min 1 mm thick putty complete all as specified & directed.Note- Primer and emmulsion to be carried out through air less spray machine (Mechanical means) |
| 19 | M & L for preparation of surfaces and applying two coat of oil bound distemperwith roller on old treated surface of wall ect complete all as specified and directed. |
| 20 | Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed. |
| 21 | M & L for Providing and applying minimum 1mm thick wall care putty over prepared surface to achive the surface even and smooth for painting. |
| 22 | M&L for Cutting openings, through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m |
| 23 | M & L brick work with fly ash bricks, straight or curved on plan exc 6M mean radius, old size brick built in cement mortar 1:6 complete all as specified and as directed. |
| 24 | M&L for RCC 1:1½ :3 type A1(using 20 mm graded stone aggregate) as in Column, pillars, piers, posts and struts etc complete all as specified and directed |
| 25 | M&L RCC type B-1 (1:2:4) using 20 mm graded stone aggregate on beams, cantilevers, lintel over 1.5 m Span complete all as specified anddirected. |
| 26 | M&L RCC type B-1 (1:2:4) using 20mm graded aggregate in slab supported on wall walls beams and columns in floors roof landings complete all as specified and directed. |
| 27 | M&L for TMT bars 10 mm dia and over for reinforcement cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, and binding with and incl MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-415 or Fe-500 complete all as specified and directed. |
| 28 | M&L TMT bars of 6 to 8mm dia and over cut to lenth, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. |
| 29 | M & L for providing cement concretetype C1 1:3:6 ( 20 mm aaggregate )as in copings. kneelers, apex stones |
| 30 | S&F of hallow strip PVC Wall Linning ( dual shade ) consisting of 6mm thick any color/ desigened PVC sheet inclusive of nails and fixing at site on wall and PVCL-beadingat top of wall lining,corner of wall,opening eadge of door & windows matching with panel as per specifications and drawing complete all as specified and as directed. |
| 31 | S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. |
| 32 | M&L for formwork to sides of concrete in foundations, footings, bases of columns, sides and soffits (if any) plinth beams, and similar work complete all as specified and directed |
| 33 | M&L for formwork to sides of concrete of pillars, posts, struts, piers, columns etc complete all as specified and directed |
| 34 | Fromwork to roof slab with projection including edges with rough finished surfaces of concrete complete all as specified and directed. |
| 35 | M&L non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exc 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and directed. |
| 36 | M&L for glazed ceramic coloured tiles 7 to 8mm thick in vertcial surfaces of size 600mm x 300mmset and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed plaster in cement mortar 1:4 complete all as specified and directed. |
| 37 | M&L for16 to 18mm thick granite ( of any type ) work (table rubbed and polished ) in steps, jambs, pillars, window -cills, cooking platforms and like pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding of edge laid over 15mm thick screed bed in CM (1:6) including rounding of edge of stone slabs one edge complete all as specified and directed. |
| 38 | S&F solid PVC moulded door frame of size 50mm x 47mm made out of 5mm prelam coloured PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet as reinforced with MS square tube and fixing in opening as specification & drawing complete all as specified and directed. |
| 39 | S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick, (styles) with 2,4 or 6 raised panel design with 2mm thick moulded prelam (Nut Brown colour ) PVC sheet on the front face & 2mm prelam (Nut Brown colur ) PVC sheet on back face, and fixing inthe frame at site as per specification and drawing on page 161of SSR (Part -II ) 2010 complete all as specified and directed. |
| 40 | S&F 100mm butt hinges stainless steel with galvanised mild steel hinge pin anodised ISI marked and fixed, complete all as specified and directed. |
| 41 | S&F 150mm long aluminium anodised barrel tower bolts of extruded section all as specified and directed. |
| 42 | S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 43 | S&F 15mm GI water tubing( Concealed type), medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed. |
| 44 | S&F 20mm GI water tubing, medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed. |
| 45 | S&F1000 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed |
| 46 | S&F ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe of 20mm dia and fixed (minimum weight 210 gms) |
| 47 | S&Ftubular towel rail, chromium plated brass 20mm dia \"D\" type 60cm long between flanges complete all as specified and directed. |
| 48 | S&F PVC valve less, syphonic action type flushing cistern, 10 Litre capacity, low level, white with inlet, ball vlave float, handle including PVC rigid pipe 32mm bore as flush pipe fixed on walls by drilling holes and using PVC rawl plug of suitable size complete all as specified and directed. |
| 49 | S&Fwash hand basins vitreous china, coloured flat back size 550 x 400mm fixed including bracket complete all as specified and directed. |
| 50 | S&Fvitreous china wash down water closet pan pedestal pattern, including P or S trap and connection to drain (or outgoing pipe) and pvc seat cover excluding flushing cistern and flush pipe complete all as specified and directed |
| 51 | S&Fplastic water closet seat cover white, closed pattern with flat bottmom & cover and aluminum anodised hinging device all as specifed and as approved. |
| 52 | S & F600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed |
| 53 | M&L forPCC 1:2:4 type B-1 using 20 mm graded stone aggregate as incopings, bed plates, plinth courses, parapets and the like including weathering, slightly rounded or chamfered angles and throatingincluding use and waste ofnecessary form work etc complete all as specified |
| 54 | Supply and fixing 15mm bore brass CP mixer valve wash basin for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 55 | S&F 15mm bore cast copper alloy chromium plated bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed. |
| 56 | S&F angle valves 15mm bore , cast copper alloy chromium plated with long sunk and cap (Concealed type), screwed down high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed. |
| 57 | S&F PVC connection, heavy duty 15mm bore, 45cm long with 2 Nos PTMT nuts of approved quality complete all as specified and directed. |
| 58 | S&F Vitreous China urinals, half stall type (flat back), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including spreader, 60mm long brass screws, pointing around urinal back in cement; fixing with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed |
| 59 | S&FPlastic water closet seat,white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed. |
| 60 | M/L for roof/sunkn treatment with polymeric water proofing mem breane with certain specification given below as under complete all as specified & directed(a) M&L plastering 10mm in CM 1:4 using 100% course sand on roof including WPC @ 3% by weight of cement.(b) Applying a coat of bitumenous primer @ 0.50 LTRs /Sqm and allow to dry(c) Applying a coat of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm. (d) Supply and laying APP based polymeric water proofing membrane, weight not less than 3.00 kg/sqm and and minimum 3 mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) sealed the side laps with spread temper (e) applying a tack coat of hot blown bitumen grade 85/25 @ 1.20Kg/Sqm |
| 61 | Dismantling wrought iron or mild steel work of any description not otherwise provided |
| 62 | Excavating in post holes (or similar holes) each n exc 0.5 cu m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil complete all as specified and directed. |
| 63 | M&L for cement concrete type C2, 1:3:6 using 40 mm graded stone aggregate as in embedding of fencing post etc complete all as specified and directed |
| 64 | S&F mild steel section such as post, single stanchions,built up of one beam or channel section with flange plates, caps,bases. splices, angle brackets,cleats and other connections conforming to IS 1161-1979 Fe-450(Gde E-250)complete all as specified and as directed. |
| 65 | Dismantling fencing wire mesh, anytype |
| 66 | S&F in repairs galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts including securing or type at crossings with and provision of galvanised mild steel wire staples or steel pins, etc complete all as specified and directed. |
| 67 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire |
| 68 | Supply Chain link fence of any size (oblong) of 3-4mm dia GI wire wirecomplete all as specified. |
| 69 | M & L preparation of new steel surfaces of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint over red oxide complete all as specified and directed |
| 70 | S&F in repair concertina coil 600mm dia of approved quality fixed with clips or clamps on angles and wall etc complete all as specified and directed |
| 71 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings |
| 72 | S&F of pre-painted galvalume aluminium zinc coatingGI basedPlainsteel sheet 0.50mm thickof any colour having tensilestrengthof 550 Mpaas in roomcovering/cladding to wall, including ridge cover fixed with self tapping screws etc complete all as specifed. |
| 73 | S&F of pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick ofany colour having tensile strength of 550 Mpa as in roof covering/cladding to wall and eaves gutters fixed with self tapping screws as specified |
| 74 | S &F in repairs Colored Polycarbonate Sheets 6mm thick (multi wall) including aluminium strip size 40x 3mm as in roof covering/ cladding to wall, fixed with self tapping screws as specified. |
| 75 | Demolition of Reinforced Cement Concreteworks of any description and in any position not otherwise specifically provided . |
| 76 | Providing precast cement concrete (type B0 1:2:4 using 12.5 mm graded stone aggregate) louvres and jallies, 25mm thick (measured solid), in cluding all mould- ings but excluding frame complete all as specified and directed. |
| 77 | S&F in repairs made of 18mm thick solid WPC density@550kg/cum, designed board with CNC cuttings white color with WPC 75x50 freme as in view cutter fixed with stapled screw & accessories fittings etc complete all as specified and directed. |
| 78 | Providing precast cement concrete in window or door cills, lintels, bressumers, steps, quoin blocks (for use with ma sonry), string courses, copings. kneelers, apex stones, pier caps,columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone allin).corbels, brackets,etc. (of any section indicated), with plain fair faces, including cham fers, weatherings, throat- ing etc. and setting in mortar complete with joints to match |
| 79 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles and removing the debris outside the defence land complete all as specified and as directed |
| 80 | M&L for Plasteringby using ready mix mixture of thickness 12 mm to 15 mm thickwith water proofing liquid all complete as per the direction of Engineer-in-Charge. |
| 81 | M&L for Plasteringby using ready mix mixture of thickness 12 mm to 15 mm thickwith water proofing liquid and taking down cement or cement lime plaster, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-in-Charge. |
| 82 | M&L for preparation of newly plastered surfaces of wall and applying two coat of cement base paint of approved shade/tint by using roller only complete all as specified and as directed. |
| 83 | M&L preparation of old plaster surfaces of wall and applying two coat of cement base paintcomplete all as specified and directed. |
| 84 | Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15cm thickness (below of above ground level) and removing the debris outside the defence land complete all as specifed and as directed. |
| 85 | Dismantling of timber scantling 40 sqcm and over in section in any position complete all as specified and directed. |
| 86 | Dismantling of timber scantling under 40 sqcm in fillets, posts, rafters, purlins etc in any position complete all as specified and directed. |
| 87 | M&L for PCC 1:4:8 type D-2 (40mm graded stone aggregate) as in foundations, fillings and mass concrete etc all as specified and as directed. |
| 88 | S&F mild steel section such asRoof trusses (framed), trussed,purlins, crane antries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.conforming to IS 1161-1979 Fe-450(Gde E-250) complete all as specified and as directed. |
| 89 | S&F MS plate as rest plate of truss forming hole for anchor bolt without any attachement complete all as specified and as directed. |
| 90 | M&L Hardcore of gauge n exc. 63 mm broken stoneor boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and as directed. |
| 91 | M&L for 100mm thickPCC 1:3:6 type C-2 using 940mm graded stone aggregate) asin sub-base complete all as specified & directed. |
| 92 | S&F 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 40 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sandcushion complete all as specfied and as directed. |
| 93 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the premises |
| 94 | S&F vitrifield ceramic tiles light shade 10mm thick (Square/rectangular) polished area of each tileexc 0.42 Sqm but n.exc 1.00 Sqmin floor etc laid over 20mm thick screed bed in CM (1:6) set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified and directed. |
| 95 | Ditto as abobe item No 6 as in skirting etc laid over 10mm thick screed bed in CM (1:3) set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified and directed. |
| 96 | S&F supply and fixing factory made uPVC Prelaminated white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wiremesh panels) upto 1.50m height made of (big series) frame116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremeshshall be paid separately) |
| 97 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and averagewidth of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified & directed. |
| 98 | S&F of sheet glass 5mm thick,ordinary quality and glazing with aluminium snap beading in squares n.exc 0.5 sq. m in each pane complete all as specified & directed. |
| 99 | S&F of Powder coated aluminium frame for doors,windows, ventilators with one or morerebates including joining cleat for fixing etc. complete all as specified |
| 100 | S&F powder coated alumium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified |
| 101 | M&Lfor 12 mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination ,fixed with screws to timber frame work, complete all as specified & directed. |
| 102 | S&F of sheet glass 4.80mm thick,ordinary quality and glazing with aluminium snap beading in squares n.exc 0.5 sq. m in each pane complete all as specified & directed. |
| 103 | S&F of sheet glass 3mm thick,ordinary quality and glazing with aluminium snap beading in squares n.exc 0.5 sq. m in each pane complete all as specified & directed. |
| 104 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel boltsetc., of required size, on the top of floor or the side of waist slab with suitable arrangement |
| 105 | S&F in repairbrass mortice lock, vertical type, size 100mm, 4 Levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified & directed. |
| 106 | S&F 200mm longaluminium powder coated barrel tower boltsof extruded section complete all as specified & directed. |
| 107 | S&F150mm long floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm complete all as specified & directed. |
| 108 | S&F ofdouble action floor spring up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass,other parts made of mild steel heavy duty and fixed etc complete all as specified & directed. |
| 109 | S&F aluminium body door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg. and fixed etc complete all as directed. |
| 110 | S&F 12 mm thick toughened glass door shuter with frosted film including for single / double leaf with including all fittings and pivot at top and fancy type handle of size not less than 300mm on both sideof shutter and locking arrangement and all necessary fitting complete all as specified and directed. |
| 111 | M&L for 75 mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as insub base, surface finished fair and evencomplete all as specified & directed. |
| 112 | S&F mild steel framed work using ERW or induction butt welded tubes conforming to I.S 1161-1979 Grade St-240 including necessary welding, bolting, special shaped washer, clamps, cleats etc. complete all as specified & as directed. |
| 113 | Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc for taking credit including making good the disturbed surfaces to match with the existing . |
| 114 | Material and labour for one light / fan point controlled by one, one way switch 06 Amp wiring with 1.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sq mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60 mm thick with 3 mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete . |
| 115 | All as per serial item No 02 here-in-before but one bell point controlled by one bell push, 06 Amp. |
| 116 | All as per serial item No 02 here-in-before but one 3 pin, 06 Amp socket outlet point on independent board controlled by one, one way switch 06 Amp. |
| 117 | All as per serial item No 02 here-in-before but one 3 pin, 06 Amp socket outlet point on same board controlled by one, one way switch 06 Amp. |
| 118 | Material and labour for power point 6/16 Amp wiring with 2.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 2.5 Sq mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall/floor by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60 mm thick etc and making good to the disturbed surfaces to match the existing complete . |
| 119 | S&F Switch Modular 6A single pole, one way, 1 module complete . |
| 120 | S&F Switch Modular 16A single pole, one way, 1 module complete. |
| 121 | S&F Socket, 6A - 2/3 pin combined 2 module complete . |
| 122 | S&F Socket 6A/16A - 2/3 pin combined 2 module complete . |
| 123 | Supply and fix fan step regulator, 120W 2 module complete. |
| 124 | S&F modularbell push single pole 1 module 6 Amp, 240 volt all as specified. |
| 125 | S&fcall bell , ding dong /musicalAC single phase 230 volts all as specified. |
| 126 | S&F Ceiling rose PVC polycarbonate all as specified and directed. |
| 127 | S&F Modular White cover plate with frame,12 module complete. |
| 128 | S&F Modular White cover plate with frame,8 module complete. |
| 129 | S&F Modular White cover plate with frame,3 module complete. |
| 130 | Supply and fixing of wall/surface mounted integrated batten LED light luminaire of 4ft length with a system wattage of 20-22W with a nominal system lumen output of 2000-2200 lumens and a minimum system efficacy of 100Lm/W. CCT shall be 6500K and CRI ≥ 80. Housing shall be extruded aluminimum with powder coating & with IP20 protection, The luminaire shall meet IP20 rating with surge protection of 2.5KVA, THD ≤10% and PF ≥ 0.95, |
| 131 | Supply and fixing recess mounting LED light fitting 2\"x2\" luminaire architectural recessed luminaire( White/Warm white colour) with CRCA housing and Molded PC diffuser with an unique angular optics for making the illumination easy on eyes for light comfort in office areas with UGR<=19. The luminaire should have a color consistency SDCM< 5, CRI > 80 and choice of CCT: 5700K. Luminaire shall be designed to emit at least 3000 lumens and an efficacy of atleast 120Lm/W and maximum system wattage of 36 Watt, designed for ambient temp 45 deg C. The metallic electronic driver shall have a power factor >0.95, THD <10%, 4KV internal surge protection and the Ripple factor should be <5% to minimise the Flicker and Stroboscopic effectall as specified. |
| 132 | Supply and fix of industrial type AC Modular box ncluding MCB, SP, AC, 240 volt of 20 Amp, \"C\" curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete. |
| 133 | Material and labour for sub main wiring with 06 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 06 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing complete . |
| 134 | Material and labour for sub main wiring with 04 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existingcomplete. |
| 135 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)with 4\" to 6\" iron down rod complete. |
| 136 | Supply and fixTPN MCB DB 4 wayswith 200 Amps rated bus bar 240Volt, Double door type complete. |
| 137 | Supply and fixing MCB TPN 63 Amps 415 V, C- curve, 50 Hz, breking capacity-10 kA. Complete. |
| 138 | Supply and fixing MCB SP 6-32Amps240 V, C- curve, 50 Hz, breking capacity-10 kA . Complete. |
| 139 | Material and labour for earthing complete with galvanised mild steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level steel earth plate connected with GI wire 04 mm dia by means oflug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15 mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150 mm thick around GI earth plate, GI pipemedium grade 20 mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40 mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6 mm dia at the rate of 75 mm centre to centre both way with 12 mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40 mm x 40 mm x 3 mm frame for pit cover including testing on completion complete . |
| 140 | S& F in repair MCB DB SPN 8 way double door type, IP-43, IK-09 and plate and necessary civil works all as specified and directed. |
| 141 | S& F in repair MCBs single pole 40 to 63 amp \"C\" series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs as required. |
| 142 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10/12 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified & directed. |
| 143 | Cutting chases in concrete wall/stone for laying PVC conduit and making good to facings where required and pointing in cement mortar 1:3, and making good, cutting not exc 20 cm girth and matching wall color. |
