Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and as directed. |
| 2 | Material and labour for rendering10mm thick on brick work or concrete surfaces in cemet mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed. |
| 3 | Material and labour for rendering cement plastering 15mm thickon brick work or concrete surfaces or in chajjas/parapet walls etc in cemet mortar 1:4 mixed with liquid water proofing compound as per manufacturer\"s instructions finished even and smooth without using extra cement and fixing of chicken wire gauge where directed complete all as specified and as directed.Note : WPC and chicken wire gauge will be measured and paid separately. |
| 4 | Supply only integral liquid water proofing compound complete all as specified and as directed.Make : Pidilite/Sika |
| 5 | Supply only chicken wire mesh 22 gauge of size not less than 20X20mm complete all as specified and directed.Make : Swastik or equivalent as approved |
| 6 | Material and labour rendering 10mm thick on ceilings or concrete surfaces in cement mortar 1:3finished even and smooth without using extra cement complete all as specified and as directed. |
| 7 | Complete removal of existing treatment of any type/description from walls/RCC surfaces/ceiling/chajjas/roof projections etc with mechanical means/grinder complete all as specified and as directed. |
| 8 | Material and labour for applying ready made wall care putty on internal/external plastered surfaces of walls /ceilings /soffits (thickness vary from 2 to 3 mmas required for desired smoothness and levelling of surfaces in two or more layers) including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and as directed by Engineer-in-Charge. |
| 9 | Material and labour for prepration of plastered/ unplastered surface of walls and ceiling and applying two coats of ditemperoilemulsion (OBD) , over & including a coat of chalk whiting primer as complete all as specified and as directed by Engineer-in-Charge. |
| 10 | Material and labour for prepration of plastered/unplastered surface of wallss/ RCC surface/ soffits of chajjas/roof projection/balconies etcand applying twocoats of exterioremulsion paint ( light shade) @ 5 sqm/litre/2 coats by using rollers on external surface over and incuding a coat of exterior primer applied @11sqm/litre/01 coat over one/more coats of putty including filling of voids and depressions with putty for making the surface smooth and evencomplete all as specified and as directed by Engineer-in-Charge. |
| 11 | Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqmincl cutting holesand making good reqd shape for hold fast block for new frame complete all as specified and directed. |
| 12 | Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holesand making good reqd shape for hold fast block for new frame complete all as specified and as directed. |
| 13 | Supply and fixing Mild Steel Pressed steel frames of size 105x60mm made out of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc,including making holes in brick work built in cement mortar for hold fasts of required size for new chowakats and making good the disturbed surface to match with existing surface complete all as specified and directed by Engineer-in-Charge. |
| 14 | Supply and fixing Mild Steel Pressed steel frames of size 105x60mm made out of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.including making holes in brick work built in cement mortar for hold fasts of required size for new chowakats and making good the disturbed surface to match with existing surface complete all as specified and as directed by Engineer-in-Charge. |
| 15 | Material and labour for cementconcrete 1:2:4 type B-1, using 20mm graded stone aggregate as in holdfast blocks/ filling in back of chowkats complete all as specified and as directed by Engineer-in-Charge. |
| 16 | Supply and fixing factory made flush shutters 35mm thick minimum 5 ply, solid core construction, with block board core and plywood face panels, commercial type on both sides with 6mm thick lipping frame to match complete all as specified and as directed by Engineer-in-Charge. |
| 17 | Supply and fixing 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including stainless steel 304 Grade wire cloth with dia.of wire 0.36mm and width of aperture 1.40 mm complete all as specified and as directed by Enigneer-in-Charge |
| 18 | Supply and fixing aluminium anodised tower bolt of 200mm extruded section and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 19 | Supply and fixing aluminium alloy sliding door bolt with hasp,staple bolt type and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections 300mm long complete all as specified and as directed by Engineer-in-Charge. |
| 20 | Supply and fixing aluminium handles 150mm long fabricated type anodised complete all as specified and as directed by Engineer-in-Charge. |
| 21 | Supply and fixing floor door stopper over all width of cover plate 150mm of aluminium alloy body and tounge ,anodised with hard drawn steel spring,fixed in floor complete all as specified and as directed by Engineer-in-Charge. |
| 22 | Material and labour for repair to RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out, Supply and apply of rust remover cum passivator by brush in two coat @ 0.3 kg/m2/coat of Density: 1.01 Kg/l at 300C all as per manufacturer\"s instructions complete all as specified and as directed by Engineer-in-Charge. |
| 23 | Supply and apply Cementitious Coating for Corrosion Protection having a cement based polymer modified rebar corrosion protection system by appling the first coat approx. 1mm thick layer of product carbonation resistance 2 mm of SikaTop Armatec®-108 or equivalent as specified corresponds to 20 mm of normal mortar; bond strength > 1N/mm2 according to ASTM C 882-78 applying @ 4 kg/m2 for two coats onto the prepared reinforcing steel with a medium- stiff brush. It is unavoidable that Sspecified product will also be applied onto the surrounding concrete. The second coat is applied in the same way after a waiting time of 2-3 hours (at +20°C) l as per manufacturer\"s instructions complete all as specified and as directed by Engineer-in-Charge. |
| 24 | Material and labour for providing, mixing & applying two component Epoxy resin concrete Bonding coat on prepared RCC surfaces as per manufacturer\"s specification including prepartaion of surface by chipping and throughly cleaning of surface complete whereeverrequired complete all as specified and directed by Engineer-in-Charge.Note:- Consumption: 0.5 kg/m2. complete all as per manufacturer\"s instructions and all as specified.Product requirements: Complies with ASTM C 881 Type II Grade 2 Class B+C. |
| 25 | Supply and apply a pre-batched one component polymer modified cementitious patch repair mortar in15mm to 50mm mm thickness.Yield: approx. 0.84 ltr/kg.System requirements: compressive strength >= 50 N/mm2 (28 days) according to ASTM C 109; flexural strength >= 3N/ mm2 (7 days) according to ASTM C 293-79.Consumption of 2.1 Kg/Sqm/mm as per manufacturers instructions complete all as specified and directed by Engineer-in-Charge. Note:- For BOQ Itemno.22&23 : Including all safety equipments, Ropes, safety belts and ladders (Scaffolding) as reqd upto hight of 15 Mtr, cost of same shall be included in quoted rates of these items |
| 26 | Material and labour for repair to RCC ceiling, sunshades, Chajjas, Balconies, Columns, bands, beams, roof slab and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcherwith cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes complete all as specified and as directed by Engineer-in-charge. |
| 27 | Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, SmartCare Damp Block 2K or approved equivalent, having 100%elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., all as per manufacturer instructions complete all as specified and as directed by Engineer-in-Charge. |
| 28 | Supply and fixing 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by Engineer-in-charge. |
| 29 | Supplyand fixing factory made PVC solid door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of extended 5 mm rigid PVC foam sheet , reinforced with steel square tube , complete all as specified and as directed by Engineer-in-charge. |
| 30 | Supply and fixing factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face consisting of frame made out of M.S. tubes for top & bottom rails.M.S. frame shall be covered with heat moulded plain colour PVC\"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement , including supplying & fixing in the frame with 3 Nos Stainless Steel butt hinges.(Make:Sintex /Cactus/Rajashree) complete all as specified and directed by Engineer-in-Charge. including supply and fixing the following items:(a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm -3 nos per leaf.(b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf(c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf |
| 31 | Supply and fixing factory made steel window box type using ERW hollow \"P\" section comprising double frame for and including gauged and glazed Skeleton shutter jointed internally with flat iron 40x4mm complete including grill of 8mm square bars, fixed horizontally @ 10cm c/c, hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No. TD-219(c) sheet 1/3 to 3/3 complete all as specified and as directed by Enigneer-in-Charge Note:-For the purpose of measurement & payment double shutter with frame shall be considered as one unit. |
| 32 | Supply and fixing mild steelventilators, fixed type, with glazing bars complete all as specified and directed by Engineer-in-Charge. |
| 33 | Supply and fixing 3mm thick sheet glass ordinary quality and glazing with oil putty in sqares not exceeding 0.5 sqm in each pane complete all as specified and as directed by Engineer-in-Charge.. |
| 34 | Supply and fixing stainless steel steel wire cloth 0.36 mm nominal dia of wire and average width of apertutre 1.40mmfixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.. |
| 35 | Supply and fixing 3mm thickfigured glass pin head type and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed by Engineer-in-Charge.. |
| 36 | Material and labour for preparation of new wood & wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over and includinga coat of pink primer complete all as specified and directed by Engineer-in-Charge. |
| 37 | Supply and fixing in repair stainless steel tubing of 25 mm dia chromium plated minimum. 1.0 mm wall thickness as in curtain rod complete including 02 Nos stainless steel brackets/finials fency type, stops fixed with ss screws etc complete all as specified and directed by Engineer-in-Charge.Note : For the purpose of measurement and payment running length of curtain rod only shall be considered. |
| 38 | Dismantling, floor, hearth or wall tiling including CM bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed by Engineer-in-Charge. |
| 39 | Material and labour for Non skid ceramic colouredtiles 7-8mm thick (square/rectangular) as in floorarea of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile laid over and includingincluding 15mm thick screed bed in cement mortar cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.. |
| 40 | Material and labour for Glazed ceramic coloured tiles of approved shade,design and finish of size 450 X 300 mm and 8-9 mm thick, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry,laid over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement mixed with pigment to match the colour of tiles complete all as specified and as directed by Engineer-in-Charge.Note : Dado should be flushed with the wall plastering. |
| 41 | Material and labour for Non skid ceramic colouredtiles 8-10mm thick as in floorareaof eachtile exceeding 0.18 sqm but not exceeding 0.38 sqm, set and jointed in neat cement slurry, laid over including 15mm thick screed layer in CM 1:4and pointed in white or coloured cement to match with the shade of tile including 15mm thick screed layer in CM 1:4 over . |
| 42 | Non skid ceramic joint free (with rectified edges), Non Skid/ Matt superior finish grade B-II (a), floor tiles 8-10mm thick and areaexceeding 0.18 sqm but not exceeding 0.38 sqm, coloured as in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and as directed by Engineer-in-Charge.. |
| 43 | Material and labour for 15-16 mm thick( Baroda) Green marble, machine cut as in shelves /steps /landings /cills /jambs /skirting /border only in tile flooring and the like works and flooring etc,including bull-nose the exposed sides /lengths, set and jointed in cement slurry laid over and including15 mm thick screed/ rendering in cement mortar (1:4) and pointed in white cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type granite polishingand including dismantling/demolition the existing marble complete all as specified and as directed by Engineer-in-Charge..Note : Single piece should be used in steps/cills/jambs/shelves. |
| 44 | Supply and fixingin repair premium/1st quality vitreous chinawall hung wash basin, white, flat back, of. size 500x400 mm , screws & plug and brackets etc.including . CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and 32 mm brass CP waste coupling half thread complete all as specified and as directed by Engineer-in-Charge.. |
| 45 | Supply and fixing premium/1st quality vitreous chinawash down water closet pan (pedestal pattern / EWC) with S orP trap white colour of size 520X360X390 mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe includingplastic seat cover closed pattern with flat bottom etc; with all necessary accessories like rag bolts/gel gasket etc complete all as specified and as directed by Engineer-in-Charge.. |
| 46 | Supply and fixing in repair PVCflushing cistern 10 ltr. capacity. with dual flushing system, white colour, valveless syphonic action type, low level, with inlet, ball valve, float , including brackets and connection to pipe etc. complete all as specified and as directed by Engineer-in-Charge. |
| 47 | Supply and fixing in repair PTMT Jet Spray with 1.5 metre long flexible tube including making connections and fixed in position complete all as specified and as directed by Engineer-in-Charge.. |
| 48 | Supply and fixing in repair 600x450mm bevelled edge mirror of selected quality glass,mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed by Engineer-in-Charge.. |
| 49 | Supply and fixing in repair sheet glass shelf assembly consisting of 5.5mm thick glass shelf of 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed by Engineer-in-Charge.. |
| 50 | Supply and fixing in repair sheet glassassembly consisting of 8mm thick glass of 300 x 300mmbevelledas in corners edges/hatching of edges fixed with stainless steel\"D\" bracket fixed and railing complete all as specified and as directed by Engineer-in-Charge.. |
| 51 | Supply and fixing in repair overhead shower 120mm dia with 225-230mm long brass shower arm with wall flange and incl all necessary accessories as recommended by manufacturer for fixing complete all as specified and as directed by Engineer-in-Charge.. |
| 52 | Supply and fixing in repair Bib taps, cast copper alloy, fency type, chromium plated, long nose with wall flange screwed for 15mm bore diairon pipe or for brass ferrule and fixed in position complete all as specified and as directed by Engineer-in-Charge.. |
| 53 | Supply and fixing in repair Stop Cock, cast copper alloy , fancy type, Chromium platedwith long shank and cup, ( concealed type),screwed down,high pressure,with crutch or butterfly handle, screwed both ends or 15 mm bore diaa iron pipe or for union Concealed |
| 54 | Supply and fixing in repair Angular Stop Cock, cast copprt alloy fency type, chromium plated with wall flange, screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified and as directed by Engineer-in-Charge. |
| 55 | Supply and fixing in repair stainless steel sink with drainage board, made of 304 quality grade stainless steel sheet,1.00 mm thick, for kitchen with plugs washers andwastesincluding bedding in cement mortar to dwarf walls or including cantilever brackets and connecting union to pipeetc, overall size 915mm x460 mm with bowl size 410x 330 x 160 mmcomplete all as specified and as directed by Engineer-in-Charge.. |
| 56 | S&F in repair towel rod CP 60 cm long between flanges and including all accessories like brackets/screws etc as recommended by manufacturer and complete fixed in position complete all as specified. |
| 57 | Supply and fixing PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by Engineer-in-Charge.. |
| 58 | Supply and fixing in repair cockroach trap gratings AISI-304 of size 100mm dia complete all as specified and as directed by Engineer-in-Charge.. |
| 59 | Taking up or down existing15 mm boe dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed by Engineer-in-Charge.. |
| 60 | Supply and fixing 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc including necessary cutting and chases n,exc 10 cm in width or girth,in brick work built in cement mortar or RCCsurfaceand making good the disturbed surface to match the existing surface complete all as specified and as directed by Engineer-in-Charge.. |
| 61 | Taking up or down existing 20 mm bore dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed by Engineer-in-Charge. |
| 62 | Supply and fixing 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and as directed by Engineer-in-Charge.. |
| 63 | Refixing 20mm bore GI steel water tubing medium grade fixed to walls and ceiling or laid in floor with all fittings complete all as specified and as directed by Engineer-in-Charge.. |
| 64 | Dismantling the PVC water storage tank of capacity 250 to 500 ltrs from roof of the buildingremoving to store etc complete all as specified and as directed by Engineer-in-Charge.. |
| 65 | Supply and fixing rotational double layered moulded polyethylene water storage tanks white colour(cylindrical vertical with closed top ) 500 Ltrs capacity , hoisted and fixed in positionincluding ball brass float valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe, including GI nipple/union of 20mm bore to connect GI tubing to PVC water tank complete all as specified and as directed by Engineer-in-Charge. |
| 66 | Supply and fixing in repairGun-metal, globe or gate valves, with iron wheel head, screwed both ends for 20mm bore iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 67 | Material and labour for cement concrete 1:7:12 mix, type E-2 (using 40mm graded Brick aggregate) as in filling of sunken portion complete all as specified and as directed by Engineer-in-Charge. |
| 68 | Material and labour for rendering 15 mm thickon brick or concrete surfaces of wall of sunken portion , in cement mortar 1:3 mixed with liquid water proofing compound as per manufacturers instructions , trowelled to even and smooth finish without using extra cementcomplete all as specified and as directed by Engineer-in-Charge. Note:- Liquid WPC shall be measured and paid separately under appropiate item of this schedule. |
| 69 | Material and labour for applying three coats of brush bond acrylic based cementitious material of approved quality for sunken portion treatmentas per manufacturer instructions and providing 200 micron thick polythene film over 85/25 grade bitumen layer applied @ 0.5 kg /Sqm complete all as specified and as directed by Engineer-in-Charge |
| 70 | Material and labour for providing25 mm bore dia GI pipe medium gradeas spouts 60 cm long complete all as specified and as directed by Engineer-in-Charge |
| 71 | Supply and fixing 40 mm bore High density polyethylene pipe(HDPE)of high pressure rating 6kgf/cm2 any length ,including all fitting elbow, tees, sockets, bends etc.fixed complete to walls,ceiling or laid in floors for connecting bottle traps & nahani trap etc complete all as specified and as directed by Engineer-in-Charge |
| 72 | Material and labour for cast iron floor / nahani trap dia of outlet 100 mm with gtaring including jointing with solvent cementto waste pipe fixed in cement concrete type B-1 (1;2:4) complete all as specified and as directed by Engineer-in-Charge |
| 73 | Supply and fixing cast iron spun pipes,100mm bore, in any length, with or without ears, with cement joints, fixed to walls with and including stack clamps, nuts , bolts etc. includingmaking necessary connections complete all as specified and as directed by Engineer-in-Charge |
| 74 | Supply and fixing 100 mm cast iron soil waste and vent spun pipe in any length with or without ears jointed with cement joints laid in floor includingdismantling of old pipes ,excavation,returning filling and levelling the surface etc complete all as specified and as directed by Engineer-in-Charge |
| 75 | Suply and fixing cast iron bends, duck foot or heel rest, any radiusfor 100 mm bore pipe complete all as specified and as directed by Engineer-in-Charge |
| 76 | Supply and fxing in repair cast iron 4 way junction for 100mm bore with access door complete all as specified and as directed by Engineer-in-Charge |
| 77 | Supply and fixing cast iron cowls for 100 mmbore cast iron pipe complete all as specified and as directed by Engineer-in-Charge |
| 78 | Supply and fixing in repair SGSW gully traps, (Centrifugal type) 150 x 150mm size, square or round mouthed, type \"P\" complete all as specified and as directed by Engineer-in-Charge |
| 79 | Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified and directed by Engineer-in-Charge |
| 80 | Demolition of mud in roofs, any thickness, including plastering and leeping(whether full thickness removed or only a part thereof) complete all as specified and as directed by Engineer-in-Charge. |
| 81 | Material and labour for Roughening surfaces of old concrete floor/roof by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and as directed by Engineer-in-Charge. |
| 82 | Material and labour for cement concrete 1:3:6, type C-0 using 12.5mm graded stone aggregates as in padding over roof, minimum thickness at khurra as 45mm to maintain slope of 1:100, complete all as specified andas directed by Engineer-in-Charge. |
| 83 | Material and labour for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed by Engineer-in-charge |
| 84 | Material and labour for laying 3mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer, weight not less than 4.0 Kg/Sqm water proofing membrane black finished, reinforced with non-woven polyster matt make as approved including of a coat of bitumen primer 0.40 Itr/sqm by the same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70-160 cps Over the coat, the layered APP membrane shall be laid using butane torch and sealing all joints etccomplete as per standard practice and as per manufacturers instructions.complete all as specified and as directed by Engineer-in-charge. |
| 85 | Material and labour for cement concrete tiles with grey cement & no pigments of size. 25 cm x 25 cm and 20 mm thick, machine pressed and cut polished and set jointed and pointed in neat cement slurry laid over and including 15 mm thick screed bed in cement mortar (1:3)and joints grouted flush in cement mortar (1:3) mixed with integral liquid water proofing compound as per manufacturers instructions over roof surfaces complete all as specified and as directed by Engineer-in-Charge. |
| 86 | Material and labour for Brick work with old size sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6)complete all as specified and directed by Engineer-in-Charge. |
| 87 | Material and labour for 50 mm thick cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in plinth protection/ floor, surfaces finished even and smooth without using extraincluding provision of construction joints filled with Bituminous mastic asphalt complete all as specified and as directed by Engineer-in-Charge. |
| 88 | Material and labour for cement concrete 1:3:6 type C-2 using 40mm graded stone aggretgate, as in base for PVC tanks complete all as specified and as directed by Engineer-in-Charge. |
| 89 | Material and labour for preparation of old steel surfaces of any description, over 10 cm width or girth not otherwise describedand applying two coats of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. |
| 90 | Dismantling of boarding of any type/size as in CB/wardrobes or fixed in any position including hardware (if any) etc complete all as specified and as directed by Engineer-in-Charge. |
| 91 | Supply and fixing 18 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets as per manufacturer’s instructions complete all as specified and as directed by Engineer-in-Charge. |
| 92 | Supply and fixing18 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour fixed with ss screws ans solvent cement/ adhesive to make kitchen cabinet shutters and shelves allas per manufacturer’s instructions complete all as specified and as directed by Engineer-in-Charge. |
| 93 | Supply amd fixingF 5 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour and pasted with solvent cement/ adhesive on frame work of cup boards complete as per manufacturer’s instructions complete all as specified and as directed by Engineer-in-Charge. |
| 94 | Supply and fixingBall bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs,complete all as specified and as directed by Engineer-in-Charge. Make:- KAFF/Hettich |
| 95 | Supply and fixingtower bolts 200mm long of stainless steel 304 finished/of outer plate metalmatt finished complete fixed in position complete all as specified and as directed by Engineer-in-Charge.Make : Harrison (Cat No 0812) or equivalent as approved by GE |
| 96 | Supply and fixing D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished200mm long matt finished complete fixed in position complete all as specified and as directed by Engineer-in-Charge.Make : Harrison (Jasmine) or equivalent as approved by GE |
| 97 | Supply and fixing continuous(piano) hinge of stainless steel width of flap 19 mm ( when open)complete all as specified and as directed by Engineer-in-Charge. |
| 98 | Supply and fixing ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer\"s instructionscomplete all as specified and as directed by Engineer-in-Charge.Make : Hettitch or equivalent as approved. |
| 99 | Supply and fixingD-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete all as specified and as directed by Engineer-in-Charge.Make : Harrison (Jasmine) or equivalent as approved by GE |
| 100 | Supply and fixing Stainless Steel 304 grade wire Basket (avg. wait 2.5 to 4 Kg. per basket) of pull out type like plain/cup&saucer/bottle/multi purpose/2-3 shelf baskets etc. for kitchens of required size complete fixed in positioncomplete all as specified and as directed by Engineer-in-Charge.Make : Hettitch/Godrej/Kaff/Harrison |
| 101 | Supply and fixing wardrobe tube/hanging rod for CB of size 20mm and 0.6mm thick stainless Steel 304 grade rectangular high gloss finish complete fixed in position complete all as specified and as directed by Engineer-in-Charge.Make : Hettitch or equivalent as approved. |
| 102 | Supply and fixing stainless steel finished locks (double action) with 2 nos of keys min outer body size 75mm suitable for wardrobes/CB etc. complete all as specified and as directed by Engineer-in-Charge. |
| 103 | Supply and fixing Steel rack for kitchen 750m x 600mm of weight not less than 5 Kg each fixed in repair complete all as specified and as directed by Engr-in-Charge. |
| 104 | Material and labour for preparation of New steel surfaces of any description, over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over red oxide primer complete all as specified |
| 105 | Supply and fixingcast iron soil waste and vent spun pipe 75 mm bore in any length with or without ears jointed with cement joints laid in floor includingdismantling of old pipes ,excavation,returning filling and levelling the surface etc complete all as specified and as directed by Engineer-in-Charge |
| 106 | Suply and fixing cast iron bends, duck foot or heel rest, any radiusfor 100 mm bore pipe complete all as specified and as directed by Engineer-in-Charge |
| 107 | Material and labour Black colour Granite 20 mm thick (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and likelaid over and including 10 mm thick rendering in cement mortar (1:3) andpointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed by Engineer-in-Charge |
| 108 | Material and labour for providing edge moulding to 18-20mm thick granite of counters vanities etc including machine polishing to edge to give high gloss finish complete all as specified and as directed by Engineer-in-Charge |
| 109 | Material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand;complete all as specified and as directed by Engineer-in-Charge |
| 110 | Excavating in trenches,not exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying of pipes,cables etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out as in soft/loose soil, complete all as specified and as directed by Engineer-in-Charge |
| 111 | Returning, filling in soft/loose soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed by Engineer-in-Charge |
| 112 | Removing excavated materials soil to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed by Engineer-in-Charge |
| 113 | Supply and fixing PVC (SWR) pipes110mm boresingle socketed in any length with rubber joints, laid in trenches/fixed to wall/ laidin floos complete all as specified and as directed by Engineer-in-Charge |
| 114 | Material and labour for cement concrete1:3:6, type C2 (using 40mm graded stone aggregate) as in concrete bed to drain pipes including packing under and haunching against the sides of 200mm bore pipes after they are laid and tested complete all as specified and as directed by Engineer-in-Charge |
| 115 | Supply and fixingPVC (SWR) bendsany radius for110 mm bore pipe complete all as specified and as directed by Engineer-in-Charge |
| 116 | Supply and fixingcast iron \"P\" trap, 600 mm long for 100mm bore dia complete all as specified and directed |
| 117 | Material and labour for reinforced precast cement concrete manhole/drain covers of size exc 0.12 sqmbut n exc 1.00 sqm and thickness not less than 50mmthick , ofshape square/ rectangular /circular fixed in positionincluding reinforcement and form work complete all as specified and directed. Note:- For measurement purpose it will be measured in cubic meter. |
| 118 | Takingdown carefully existing points wiring on surface conduit/concealed conduit including conduit from surface and expect conduit in concealed wiring for light/fan/socket/power/bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, unserviceable light fittings, pieces of wires, gutties, conduit, wooden boards etcremoving materials to store for keeping in safe custody of contractor for which the credit has been considered under schedule of creditand making good the disturbed portion of all floor, ceiling etc all as complete all as specified and as directed by Engineer-in-Charge. |
| 119 | Material and labour for Point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper conductor for one light/fan/bell in new PVC conduit to be terminated in pressed steel terminal boxes with top cover plateincluding 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment complete all as specified and as directed by Engineer-in-Charge. Notes:- (i) Switches and regulators shall be measured and paid for separately. (ii)Wiring shall be done as per colour code in IS for phase, neutral and earth). (iii) The cost of modular cover plate and metal flush boxes is deemed to be included in the unit rate quoted for this item). (iv) cost of Eye/bottle thimblesused for connection in switches/sockets & MCBs in DBs is deemed to be included in the unit rate quoted for this item. (v) Rate of cutting chasing included in the unit rate quoted for this item. |
| 120 | Material and labour for point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper conductor for one light point controlled by 2 way and including PVC rigid concealed conduit medium grade 19/20 mm dia to be terminated in pressed steel terminal boxes with top cover plateincluding 1.5 sqmmPVC insulated and unsheathed FRLSH single core multi-stranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment complete all as specified and as directed by Engineer-in-Charge. Notes:- (i) Switches and regulators shall be measured and paid for separately. (ii)Wiring shall be done as per colour code in IS for phase, neutral and earth). (iii) The cost of modular cover plate and metal flush boxes is deemed to be included in the unit rate quoted for this item). (iv) cost of Eye/bottle thimblesused for connection in switches/sockets & MCBs in DBs is deemed to be included in the unit rate quoted for this item. (v) Rate of cutting chasing included in the unit rate quoted for this item. |
| 121 | All as per Sl item No 120.00 above here-in-before but one socket out let 5 pins 5 Amp on the same board with other switches complete all as specified and as directed by Engineer-in-Charge. |
| 122 | All as per Sl item No 120.00 above here-in- before but for one socket out let 5 pins 5 Amp on independent board complete all as specified and as directed by Engineer-in-Charge. |
| 123 | All as per item No.120.00 herein beforebut 2.5 Sqmm PVC insulated and unsheathed FRLSH single core multistranded copper conductor incl 2.5 Sqmm PVC insulated and unsheathed FRLSHcopperearth wire for switch socket combination 3 pin 15 amps on independent board complete all as specified and as directed by Engineer-in-Charge. . |
| 124 | Supply and fixing Modularswitch1 way, 6 Amps, 1 module, 230 volts complete all as specified and as directed by Engineer-in-Charge. |
| 125 | Supply and fixing Modularswitch2 way, 6 Amps, 1 module, 230 volts complete all as specified and as directed by Engineer-in-Charge. |
| 126 | Supply and fixing Modularswitch1 way, 16 Amps, 1 module, 230 volts complete all as specified and as directed by Engineer-in-Charge. |
| 127 | Supply and fixing Modularbell push switch1 way, 6 Amps, 1 module complete all as specified and as directed by Engineer-in-Charge. |
| 128 | Supply and fixing of Call bell ding dong AC 230 volt single pole ccomplete all as specified and as directed by Engineer-in-Charge. |
| 129 | Supply and fixing Modular socket 5 pin 6 Amps, 2 module 230 volts complete all as specified and as directed by Engineer-in-Charge. |
| 130 | Supply and fixingModularsocket 5 pin 6 &16 Amps, combination type2 module complete all as specified and as directed by Engineer-in-Charge. |
| 131 | Supply and fixing Modular Fan regulator step type, 120 watts, 2 module complete all as specified and as directed by Engineer-in-Charge. |
| 132 | Supply and fixing ceiling rose surface bakelite surface 65 x 50mm3 terminalscomplete all as specified and as directed by Engineer-in-Charge. |
| 133 | S&F in replacement ofLamp holder including LED bulb 9 W including flexible wire 0.5 Sqmm copper cable all as specified & directed by Engr-in-charge. |
| 134 | Supply and fixing in replacementNew generation energy saving and environmental friendly long life LED building security light 1x35 watts made up of pressure die cast alluminium housing with high power LED as light source and lense embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07,with all accessories including suitable bracket with 32mm bore light grade GI pipe bemd to shape, including MS clamp of size of required size and PVC cable 1.5 Sqmm twin core from ceiling rose to light fittings complete all as specified and directed by Engineer-in-charge. |
| 135 | Supply and fixing in replacement Surface Mounted LED Bulk Head Luminaire of capacity 10 watt with ABS Body & Polycarbonate Diffuser, IP54 inc connection with ,with flexible wire 0.5 sqmm copper cable complete all as specified and as directed by Engineer-in-Charge. |
| 136 | Material and labour for Sub main wiring with two single core 6.0 Sqmm PVC insulated and unsheathed FRLSH,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 6.0 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire including taking down u/s sub main wiring complete all as specified and as directed by Engineer-in-charge.Notes :-(i)-2(two) Runs of 6.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 6.00 Sqm Copper conductor Earth wire shall be measured as one unit)(ii) Rate quoted for this items shall be inclusive of the cost of (iiii) Rigid non-metallic PVC conduit of 25 mm dia with tees, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.(iv) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces and cutting not exc.10 cm girth . (vi) Including taking out/down existing unserviceable sub main wiring. |
| 137 | M & L for Sub main wiring with two single core 4.0 Sqmm PVC insulated and unsheathed FRLSH,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 4 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire complete all as specified and as directed by Engineer-in-charge.Notes :-(i)-2(two) Runs of 6.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 6.00 Sqm Copper conductor Earth wire shall be measured as one unit)(ii) Rate quoted for this items shall be inclusive of the cost of (iiii) Rigid non-metallic PVC conduit of 25 mm dia with tees, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.(iv) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces and cutting not exc.10 cm girth . (vi) Including taking out/down existing unserviceable sub main wiring. |
| 138 | Supply and fixing in replacementMCCB, 4 Pole, 63 A, 16 KA for fixing in DB including proper thimble connection, thermal and magnetic release protectioncomplete all as specified and as directed by Engineer-in-charge. |
| 139 | Supply and fixing in replacementepoxy power coated MCCBdistribution box double door VTPN 4 way vertical type AC 415 V with IP 43 protection for MCBs alongwith provision of MCCB as incomer with commen bus-bar at incoming end of outgoing MCBs grouted/ flush to wall, complete all as specified and as directed by Engineer-in-charge. Notes :- (i)MCCB will be measured and paid under seperate item) (ii) Cost of Eye/bottle thimblesused for connection MCBs in DBs shall deemed to be included in unit rate quoted for this items, (iii) Electric wiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth.(iv) connection of theMCCBs/ MCBs with cableshall be made through appropriate size pin /bottle type thimble -properly crimped. all the vacant holes of the DB shall be provided with blank plates of appropriate size. |
| 140 | Supply and fixing in replacement of Sheet metal enclosure 8 ways double door for DBs when MCBs areto be used 240,volts including 200 Amps standard bus bar of suitable size and common neutral link allflush mounting type, drilling holes for incoming and out going cables with IP 43 protection complete all as specified and as directed by Engineer-in-charge. |
| 141 | Supply and fixing in replacement of MCB , SPN, 240 Volts ,32-40 amp for fixing in DBs ofincluding proper thimble connections complete all as specified and as directed by Engineer-in-charge.. |
| 142 | Supply and fixing in replacement of MCB, single pole 240 volts 6 to 32 Amp capacity for fixing in DB’s including proper thimble connections complete all as specified and as directed by Engineer-in-charge. |
| 143 | Material and labour forEarthing complete with galvanized iron earth plate electrode of size 600x600x6.0mm , buried directly in ground (earth pit not less than 2.25 mtrs below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts , nuts , check nuts and galvanized iron or steel including earth work in any type of soil, charcoal salt 15 cm around the earth plate 20 mm dia watering pipe medium grade 1.70 mtr long with a plug at top, GI protection pipe light grade 15 mm dia from earth pit to main board including PCC pit in cement concrete 1:2:4 along with CI frame and cover 10mm thick duly hinged to CI frame as shown in the electrical plate No3 of SSR 2009 part 1 specification at page 497.complete all as specified and as directed by Engineer-in-charge. |
| 144 | Supply and fixingTube light fitting Self Ballasted LED Batten. Extruded Thermoplastic body with PC Diffuser in squareLED Batten 18/20W 6500Kof capacity ,20 watt,4 ft long incl 3 core flexible wire 0.5 sqmm copper cable complete all as specified and as directed by Engineer-in-charge. |
| 145 | Supply and fixing in replacement of elegatly designed sleek surface mounted pressure die-cast aluminiumLEDluminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation and independent electronic LED driver of capacity 12 W LED of 5000 K and making good the existing surface as per existingcomplete all as specified and as directed by Engineer-in-charge. |
| 146 | Supply and fixing exhaust fan AC single phase 230/240 v of size 300 mm sweep 900 rpm metal body, high efficiency motor, dynamically balanced blade for better performance and corrosion-resistant powder coated metallic finish including louver complete all as specified and as directed by Engineer-in-charge. |
| 147 | Taking down and refixing of ceiling fanafter necessary cleaning painting making serial No ccomplete all as specified and as directed by Engineer-in-charge. |
| 148 | Supply and fixing exhaust fan AC single phase 230/240 v of size 250 mm sweep 900 rpm Engineering thermoplastic body, high efficiency motor, dynamically balanced blade for better performance and corrosion-resistant powder coated metallic finish including louver complete all as specified and as directed by Engineer-in-charge. |
| 149 | Supply and fixingsingle pole and neutralenclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, complete all as specified and as directed by Engineer-in-charge. |
| 150 | Material and labour for PVC Meter Box of suitable size for single phase LT meter. door with 1 Nos of transparent glass of suitable for visibility of meter fixed on door with suitable arrangemnets. meter box shall beembedded in wall complete all as specified and as directed by Engineer-in-charge. Notes:-( i) Necessary cutting/ chiseling required for embedding meter box in brick work built in cement mortar and making good the surface shall be included in quoted rates (ii) To fix the meter box required disconnecting and refixing of connectionsshall be included in quoted rate. |
| 151 | Material and labour for sand cushioning for cables 8 cm below the cable and 15 cm abovewith dry river sand in trenches for cushioningof underground cable line including spreading, leveling, well ramming completed all as specified and directed. |
| 152 | Material and labour for cutting of hardstanding floor/wall for laying of cable including matching with suface by using cement concrete complete all as specified and as directed by Engineer-in-charge. |
| 153 | Supplying and laying factory made unreinforced Precast concrete cable coversclass LV type 1, flat, Size 250x150x40mm laid in trenches as protection to cables complete all as specified and as directed by Engineer-in-charge. |
| 154 | Material and labour for replacement of GI tubing light grade 40 mm borefor passing through cables under the floor ,along the wall or along the pole complete all as specified and directed. |
| 155 | Supply and laying in trenches, on poles, walls etc XLPE Insulated ,screened, PVC bedded, galvanized steel wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core including removing the existing u/s cable complete all as specified and as directed by Engineer-in-charge. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
