Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 24-12-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 31-12-2025 |
| Sl. No. | Item Description |
| 1 | S&F in repairs False ceiling of 9.5mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders/Hangers 4 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs/trusses complete all as specified standard galvanised sections in a grid size of 600mmx600mmincluding taking down existing ceiling board & grid work etc of any type/pattern complete all as specified and directed. |
| 2 | S&F in repair Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified incl dismanling of existing roof sheets any type complete all as specified and directed. |
| 3 | S&F in repair Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick and 600 mm width ofan ecofriendly colour having tensile strength of 550 Mpa as in ridges/valley , fixed with self tapping screws incl dismanling of existing ridge complete all as specified and directed. |
| 4 | S & F in repair Machine cut kota stone in flooring/treads of steps 18-20 mm thick over and incl 20 mm thick cement screed base in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the floor including rubbing and polishing complete and moulding at edge if reqd complete all as specified and directed. |
| 5 | S & F in repair Machine cut Kota stone slab 18-20 mm thick in riser of steps, skirting, dadoand pillar laid over 10 mm thick rendering in CM 1:4 and jointed with jointed with grey cement slurry mixed with pigment to match the shade of the floor including rubbing and polishing complete and moulding at edge if reqd complete all as specified and directed. |
| 6 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 7 | M&L for non skid(joint free)colouredceramic tiles 7 to 8 mm thick area of each tile exc. exceeding 0.18 sqm but not exceeding 0.38 sqm,in floorsetc set and jointed in neat cement slurry and pointed in coloured cement to match laid over & including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 8 | M&L for glazed ceramic coloured tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl rendering 10mm thick in CM (1:4) and finished rough complete all as specified and directed. |
| 9 | M&L for non skid(joint free)colouredceramic tiles 7 to 8 mm thick area of each tile exc. exceeding 0.18 sqm but not exceeding 0.38 sqm,as in skirtingetc set and jointed in neat cement slurry and pointed in coloured cement to match laidover & including 10 mm thick rendering in CM 1:4complete all as specified and directed. |
| 10 | M&L for non skid ceramic coloured tiles (joint free) 7 to 8 mm thick area of each tile exc. 0.11 sqm and n. exc. 0.16 sqmin floorsetc set and jointed in neat cement slurry and pointed in coloured cement to match laid over & including 15 mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 11 | M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floorsetc set and jointed(joint free) in neat cement slurry and pointed in coloured cement. overscreed bed or bedding layers of mortars 15 mm thick in CM 1:6 for layingfloor finishes all as spd and directed incl dismantlingfloor, hearth or wall tiling complete all as specified and directed. |
| 12 | M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in skirtingetc set and jointed(joint free) in neat cement slurry and pointed in coloured cement. over10 mm thick reneringin CM 1:4 for layingfloor finishes all as spd and directed incl dismantlingfloor, hearth or wall tiling complete all as specified and directed. |
| 13 | M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm not exceeding 0.42sqm each, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floorsetc set and jointed(joint free) in neat cement slurry and pointed in coloured cement. overscreed bed or bedding layers of mortars 15 mm thick in CM 1:6 for layingfloor finishes all as spd and directed incl dismantlingfloor, hearth or wall tiling complete all as specified and directed. |
| 14 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, urinal partions and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl edge moulding to give high gloss finish complete all as specified and directed. |
| 15 | Taking down chowkats or frames exc 1.5 sqm but n exc 4 sq.mwith shutter (without taking off shutters from the frame) complete all as specified and directed. |
| 16 | Taking down chowkats or frames notexc 1.5 sqm each with shutter (without taking off shutters from the frame) complete all as specified and directed. |
| 17 | Taking down Shutters of any description exc 1 sqm but n.exc 2 Sqm eachcomplete all as specified and directed. |
| 18 | S&FPressed steel frames for doors, 105x60mm size, made out of 1.25mm thick sheet, with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc incl filling of the frame with plain cement concrete complete 1:3:6 type C-0 complete all asspecified and directed |
| 19 | S&FPressed steel frames for doors, 125x60mm size, made out of 1.25mm thick sheet,with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc incl filling of the frame with plain cement concrete complete 1:3:6 type C-0 complete all asspecified and directed |
| 20 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 21 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorativeFlush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/ cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/ mm Sq, Modulus of elasticity 850 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws, all as per direction of Engr-in-Charge (Note Stainless steel butt hinges and necessary SS screws shall be paid separately) |
| 22 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorativeFlush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/ cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/ mm Sq, Modulus of elasticity 850 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws, all as per direction of Engr-in-Charge (Note Stainless steel butt hinges and necessary SS screws shall be paid separately) |
| 23 | M&L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 incl taking down existing one complete all as specified and directed |
| 24 | Dismantling structural steel work including doors, gates butexcludingframed truss etccomplete all as specified and directed. |
| 25 | Taking down roof trusses, coupled rafters or trussed beams of span exc 4m but n.exc 8m complete all as specified and directed. |
| 26 | Dismantling timber scantlings 40 sq. cm and over in section, in any position in unframed work etc complete all as specified and directed. |
| 27 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins whereconnected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates FE 410W Gde E250 quality A complete all as specified and directed |
| 28 | S&F Tubular framed steel trusses (all as per pattern of existing dismantled trusses) made out of MS medium grade tube (ERW or induction butt welded) upto 60mm bore conforming to I.S.1161-1979 grade St.-240 Quality A, including welding of distance pieces, cleats and application of two coats of synthetic enamel paint over a coat of red oxide primer on exposed surface, etc complete all as specified and directed. |
| 29 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.5cm but n.exc 30 cm long and 16mm dia of shank complete all as specified and directed. |
| 30 | M&L for Cement concrete 1:2:4 type B1 ( using 20 mm graded stone aggregate) inroof kerbs or mud stops, rounded or chamfered on edges or for fixingtrusses complete all as specified and directed. |
| 31 | S&F 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm thick BWP commercial ply. The size of rail and stile as per IS-1003 (Part-I) (Larger size to be provided) kiln seasoned and chemically pressure treated, fitted to chowkhats including preparation of surfaces of shutter and application of two coats of synthetic enamel paint over a coat of pink primer, etc complete all as specified and directed. |
| 32 | Supply & fixing 35 mm thick wire guazed and skeleton shutters (2nd class hardwood) , open rebated and prepared to receive wire cloth, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing wire cloth, etc.; sizes of members of shutters as specified in fitted to chowkats including preparation of surfaces of shutter and application of two coats of synthetic enamel paint over a coat of pink primer, etc complete all as specified and directed |
| 33 | S&F powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 34 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. |
| 35 | S& F in repairs Box type Steel windows and ventilators comprised oftubular frame and shutters made out of 1.25mm thick M S sheet tubefactory made with double side hungwire gauged shutter & glass/glazed shutter (wire cloth and glass panes only shall be measured and paid separately) with steel handle and steel peg stay dovetailed or welded incl 2 Nos. tower bolts 150mm long for each leaf and 10mm square bar grills at spacing as shown on drg, welded to F I frame work, including other fittings; hinges, handles, tarred hold fasts fixed in PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed. |
| 36 | S& F in repairs 18 mm thick lead free factory made 100% solid WPC (wood polymer composite) sheet for cupboard / Kitchen cabinet shutters and frames having high natural fiber content 25 to 30% wood colour sheets with density not less than 500 kg/ cum and the weight of sheet of 1 sqm should be 11 kg (+/- 5%) manufactured by ISO 9001-2015 certified company. the sheet should be 100% water proof, termite proof, fire retardant, manufacured by single layer extrusion process with excellent screw holding capacity and shore D hardnesscomplete all as specified and directed. |
| 37 | S & F Continuous (piano) hinges 30 mm flap when open, mild steel, bright finish or electrogalvanised complete all as specified and directed. |
| 38 | M&L 100 mm Hasp and staple,aluminium anodised,including bolt to hinge plate and fixed with screws complete all as specified and directed.. |
| 39 | S&F 3 mm sheet glass (for windows), ordinary quality insquare or rectangle n. exc 0.5 sqm each panefixed to framed work complete all as specified and directed. |
| 40 | S&F 4.0 mm sheet glass (for windows) , ordinary quality insquare or rectangle n. exc 0.5 sqm each panefixed to framed work with solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturer complete all as specified. |
| 41 | S&F 4.8 mm sheet glass (for windows), ordinary quality insquare or rectangle n. exc 0.5 sqm each panefixed to framed work complete all as specified and directed. |
| 42 | S & FStainless steel wire cloth,0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or rubber/all beads complete all as specified and directed. |
| 43 | S & Fin repair Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or rubber/all beads complete all as specified and directed. |
| 44 | Hacking out old broken glass ( any thickness , size, quality, or description) from metal frame glazed with putty or fixed with beads/ clips complete all as specified and directed. |
| 45 | S F150 mm long aluminium anodised, barrel tower bolts of ex- truded section and fixed complete all as specified and directed.. |
| 46 | S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 47 | S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy acomplete all as specified and directed. |
| 48 | S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete |
| 49 | S&F Door closer hydraulically regulated, aluminium (Die cast body)body designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed complete as specified and directed. |
| 50 | S & F100 mm long Butt hinges type C-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed. |
| 51 | S & F100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed. |
| 52 | M&L for Cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair incl making joints at every 2.5m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight incl demolition and complete all as specified |
| 53 | S&F in repairs20 mm bore mild steel drapery rods with 1 mm thick PVC wood grain coating including brackets and knobs fixing on windows and doors for hanging curtains incl taking down old cutain rods complete all as specified and directed. |
| 54 | Taking down cement plaster, hacking for key, raking out joints of old brick work built in cement mortar and scrubbing down with water etc. to receive plaster complete all as specified and directed. |
| 55 | M&L for 15 mm thick rendering in two layers (10 mm thick in cement mortar 1:6 and 05 mm thick in CM 1:6 with water proofing compound) mixing with WPC @ 200 ml/ bag of cement on brick or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed. |
| 56 | M&L for rendering 10 mm thick plaster in cement mortar (1:6) on brick or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed. |
| 57 | M&L for 5 mm thick rendering in cement mortar (1:3) on ceilingsurfaces and finished even and smooth without using extra cement & preparation of newly plastered surfaceand applying three coats of white wash completeall as specified and directed. |
| 58 | M&L for preparation ofnew surfaces of plasterand applying two coats of cement base paint over one coat of alkali resistant priming paint on wall surfaces complete all as specified and directed.. |
| 59 | M&L for complete removal of existing traetment of walls, preparation ofsurfaces oand applying two coats of cement base paint over one coat of alkali resistant priming paint on wall surfaces complete all as specified and directed.. |
| 60 | M&L for prepartion ofoldplastered surfaces of wallsand applying one coats of cement base paintcomplete all as specified and directed. |
| 61 | M&L for preparation of new plastered surfaces of wall by applying 2mm thick wall care putty and making the surface smooth and applying two coat of oil emulsiondistemper complete all as specified & directed. |
| 62 | M&L for complete removal of existing tratment of walls,preparation surfaces by applying 2mm thick wall care putty and making the surface smooth and applying two coat of oil emulsiondistemper complete all as specified & directed. |
| 63 | M&Lfor preparation of newly plastered surfacesof wall and applying three coats of white wash completeall as specified and directed. |
| 64 | M&Lfor preparation of newly plastered surface of ceilingand applying three coats of white wash completeall as specified and directed. |
| 65 | M&Lfor preparation of old plastered surfacesof walls and applying one coatof white wash completeall as specified and directed. |
| 66 | M &L for Preparation of old painted surfaces of steel of any discription exc 10cm width or girth and providing one coat of synthetic enamel paint complete all as specified and directed. |
| 67 | M &L for preparation of New painted surfaces of steel of any discription exc 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 68 | Demolition of brickwork or stone/ boulder masonry, built incement mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work and pre cast concrete articles complete all as specified and directed. |
| 69 | M&L for Brick work with fly ash bricks (Old Size bricks) straight or curved on plan exc 6 mtr mean radius built in CM (1:6)complete all as specified and directed. |
| 70 | M&L for Brick work with fly ash bricks (Old Size bricks), in half brick thick walls,straight or curved on plan exc 6 mtr mean radius built in CM (1:4)complete all as specified and directed. |
| 71 | S&F in repair Bib taps with flange for 15 mm bore pipe, cast copper alloy fancy type chromium plated fixedcomplete all as specified and directed. |
| 72 | S&F in repair Stop valve/ Angle valve with flange cast copper alloy (ISI Marked) chromium plated screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia complete all as specified and directed. |
| 73 | S&F in repair Stop valve/ Angle valve with flange cast copper alloy (ISI Marked) fancy type, chromium plated, with long shank and cup (concealed type) screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia complete all as specified and directed. |
| 74 | S&F 600 mm x 450 mm mirror of selected quality 5 mm thick glass with PVC frame fixed with chromium plated brass screws and cup washers with PVC beading all as spd. |
| 75 | S&F in repairs PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outletconnections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC all as specified and directed. |
| 76 | S & Fin repairs Vitreous china wash basin of size 550x400mm, white flat back, including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting standand 32 mm diaPVC waste pipefixed in repair including waste copling 32mm size full thread ,all as spd and directed |
| 77 | S&F in repair Vitreous china wash down water closet pan (pedestal pattern), white, complete including fixing to trap, Incl Supply and fixing of PVC seat and cover for pedestal pan complete all as specified and as directed. |
| 78 | S&Fcounter sunk oval typevitreous china wash hand basin (flat back or angle back type)colouredof bowl size 550mmx400mm including waste and waste pipe PVC 32mm dia to be fixed , including15mm bore pillar tap chromium plated andBottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 260gms) complete all as specified and directed. |
| 79 | S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 80 | S& F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm longcomplete all as specified. |
| 81 | S&F in repair towel rail brass chromium plated 600 mm long complete all as specified and directed. |
| 82 | S&F Stainless steel Grating doom 100mm dia with waste hole complete fixing in floors complete all as specified and directed. |
| 83 | S&F Stainless steel Grating doom 100mm dia complete fixing in floors complete all as specified and directed. |
| 84 | S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 85 | S&F in repair Tubes, 15 mm bore \"medium grade\" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors incl taking down existing complete all as specified and directed. |
| 86 | S & F PVC (SWR) pipes 75mm single socked, in any length with rubber ring joints fixed to wall/laid in trenches incl taking down exiting rain water pipes any type complete all as specified and directed. |
| 87 | S & F PVC Bends 75mmbore dia fixed complete all as specified |
| 88 | S&F in repair 50 mm dia sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints,fixed on walls with clamps incl dismantling of CI Pipe complete all as specified and directed. |
| 89 | S&F 50 mm dia sand cast CI Bends with oval access door and jointed with neat cement paste complete all as specified and directed. |
| 90 | S&F in repair Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ sqcm laid in trenches complete all as specified and directed. |
| 91 | S&F in repair triple layer Rotational moulded polyethlene water storage tanks of capacity 1000 litres three layers(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball PVC valve high pressure with polythene float incl taking down existing water tank of any capacity complete all as specified & directed. |
| 92 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 93 | S& F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 94 | M & L for 25 mm thick PCC 1:2:4, type B-1(using 20 mm graded aggregate) as in sub floors for laying floor finish complete all as specified and directed |
| 95 | M&L for 75mmPCC 1:4:8: type D-2 (using 40 mm graded aggregate) in floors as sub base, surface finished even and rough to receive top floor finish complete all as specified and directed. |
| 96 | S&F exterior grade rubber moulded coloured Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey pigmentcement and colour pigment in floors laid over & including 20 mm thick screed bed in CM 1:6 all ascomplete all as specified and directed. |
| 97 | M&L for providingplain cement concrete 1:2:4 type B-1 (using 20 mm graded aggregate) in in lintels upto1.5m clear span,cills,steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering,slightly rounded or chamfered angles and throating, as directed. |
| 98 | Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level all as specified and directed. |
| 99 | Demolition of cement concrete (reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level all as specified and directed. |
| 100 | Use & waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces complete all as specificed and directed. |
| 101 | Use & waste of formwork to sides of columns, pillars, piers, postspiers, posts stantions for rough finished surfaces complete all as specificed and directed. |
| 102 | Use & waste of formwork to bottoms & sides of beams, cantilevers, lintels exc 1.50 metre span for rough finished surfaces complete all as specificed and directed. |
| 103 | Use & waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)complete all as specified and directed. |
| 104 | Use & waste of formworkedges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofsand sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 05cm but n exc 10cm wide for rough finished surfaces of concretecomplete all as specified and directed. |
| 105 | M&L for Reinforced cement concrete, design mix M-25, (using 20mm graded stone aggregates) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specificed and directed. |
| 106 | M&L for Reinforced cement concrete, design mix M-25, (using 20mm graded stone aggregates) in columns, pillars, posts, strutscomplete all as specificed and directed. |
| 107 | M&L for Reinforced cement concrete, design mix M-25, (using 20mm graded stone aggregates) in beams, cantilevers, bressummers. Lintels over 1.50 metre spancomplete all as specificed and directed. |
| 108 | M & L for reinforced cement concrete M-25using 20 mm gradedaggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the likeetc complete all as specified and directed. |
| 109 | M&L for Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending, binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 110 | M&L for Mild steel TMT bars 8 to 10mm dia and over, as in stirrups, binders, spacers etc.,cut to length bent to shape required including cranking, bending, binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 111 | Excavating in trenches in any type of soil, n. exc. 1.5 m wide and n. exc. 1.5 m in depth, for foundation, cables, pipes etc. or for shafts, wells, cess pits, manholes, pier holes, etc n. exc. 10 sqm on plan and n.exc 1.5 m in depth and getting out complete all as specified and directed. |
| 112 | Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm complete all as specified & directed. |
| 113 | Removing surplus excavated spoil to a distance not exc. 50m and depositing where directed at a level not exc 1.5m above the starting pointcomplete all as specified & directed. |
| 114 | Supply, laying & jointingin repair electric cable, LT 1100 volts grade heavy duty, XLPE insulated, armoured heavy duty, with aluminium conductor of size 16 Sqmm 2 core in trenches or fixed to wall/pole or passing through ducts or pipe, including taking out existing cable complete all as specified and directed. |
| 115 | Supply and laying in repair DWC (double wall corrugated) pipe 40mm bore dia, type SN-8, laid for protection of cable, in trenches, floors etc. complete all as specified and directed. |
| 116 | Supply & laying in repairs galvanised steel tubing, light grade 40mm bore dia, laid for potetion of vable, in trenches, floors etc. complete all as specified and directed. |
| 117 | M&L for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed. |
| 118 | M&L for hard core of gauge n exc 63 mm deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface,complete all as specified and directed. |
| 119 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified & directed. |
| 120 | M&L for point wiring for one light/fan/bell point controlled with one switch with PVC insulated fire retardant low smoke multistranded copper conductor cable of 1.5 sqmm in and including PVC concealed non metallic conduit(ISI Marked) medium grade not less than 20 mm diawith all accessories and including pressed steel sunken terminal boxes (for mounting switches / regulators/socket /bell push etc ) made of not less than 16 gauge MS sheet and 6 cm depth covered with 3mm thick laminated bakelite sheet fitted with brass screw and cup washers and drawing 1.5 sqmm PVC insulated fire retardant low smoke multistranded copper conductor cable as earth continuity wire in green colour connected to common earth dolly and each terminal box/fitting including cutting chases to wall,making good the disturbed surfaces to match with theexistingcomplete all as specified and directed by Engr-in-Charge (Phase Neutral and earth wire shall be provided in standard colour code R,Y,B for phase, Black for neutral green for earth wire).Note :In ceiling Portionsurface conduit wiringshall be carried out complete all as specified & directed. |
| 121 | All as per description of serial item No. 120 here in before but one 5 pin socket out let 5/6 Amps on same board with other switches. |
| 122 | All as per description of serial item No. 120 here in before but one 5 pin socket out let 5/6 Amps on sindependent board |
| 123 | All as per description of serial item No. 120 here in before but for 2 in 1, 15/16 ampmultipurpose socket outlet/metal plug top with 2.5 sqmm FRLS cable PVC insulated unsheathed multistrandincluding 2.5 sqmm FRLS PVC insulated copper wire for earth continuity on independent board complete. |
| 124 | All as per description of serial item No. 120 here in before but for 2 in 1 15/16 ampmultipurpose socket outlet/metal plug top/ Geyser with 4 sqmm FRLS cable PVC insulated unsheathed multistrand including 4 sqmm FRLS PVC insulated copper wire for earth continuity on independent board complete. |
| 125 | S&F Switch pianoflush button single pole one way 6 Amps 240 volts with polycarbonate body complete all as specified and directed. |
| 126 | S&Fmulti purpose socket outlet for 2 & 3 pin, 6A, flush type complete all as specified and directed. |
| 127 | S&F socket outlet 2 in 1, 5 pin, 6 and 16 Amps , flush type, single pole, oneway, 230Volts complete all as specified and directed. |
| 128 | S&F switch piano, flush type, single pole, oneway, 16 Amps 230 Volts complete all as specified and directed. |
| 129 | S&F stepped type electronic mini /delux fan regulator 100 watt rotary step complete all as specified and directed. |
| 130 | M&L forsubmain wiring with 2 run of single core, 6 sqmm PVC insulated and unsheathed, multi strandedcopper conductor cable FRLS usingcolour code forphase red and neutral black with and including6 sqmmPVC insulated and unsheathed FRLS conductor multi stranded cable in green colour connected to common earth point and connected to earth dolly drawn through PVC rigid conduit of suitable size, heavy grade (ISI marked) with and including all accessories, fixed to surface / recessed complete all as specified and directed.Note:-1.Proper colour coding is to be followed as per IS Specification.2.Two runs of single core cable with one run of earth cable of conduit shall be measured as one RM.3. Cutting chases for submain wiring concealed PVC rigid conduit shall be deemed to be included in the quoted rate of item. |
| 131 | S&F ceiling rose surface bakelite 65 x 50mm, three terminals ISI (Marked) complete all as specified & directed. |
| 132 | Supply and fixingLamp holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed. |
| 133 | Supply and fixingLED Lamp 9 watt B-22 holder base with polycarbonate body and aluminium heat sink warm white complete all as specified and directed by Engineer - in - Charge. |
| 134 | S&F in repairs LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V, AC, recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 135 | Supply & fixing for 1x20 watt LED 6500Ktube light fittings (4 feet long),Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficientwith all accessories and making connection using 2 core, 0.50 Sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc complete all as specified and directed. |
| 136 | Supply and fixing LED light fittings mirror type with high out put diffuser 2 feet .10 watt 220 volt AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 137 | S&FLED Bulk Head luminaries 10W complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ complete all as specified & directed. |
| 138 | Supply & Fixing building security LED lightluminaire 30 W, IP 66, AC 230 volts,made up of pressure di cast iron housing complete making connectionusing PVC insulated and sheathed3 core multi stranded copper conductorcable of size 0.50 Sqmm from ceiling rose including suitabe size of bracket of light grade pipe for mounting of fittingalong with clamps, nut bolts and washers complete all as specified & directed. |
| 139 | S&Fdecorative wall light white in colour made up of poly carbonate suitable for 9 watt retrofit LED lamp complete all as specified & directed. |
| 140 | Note for Item No 132 to 139 :- 1. Driver should be potted anti-vibration types.2. LM-79 and LM-80test report with lakh burning hours LED life from NABL lab shuld be provided.3. CRI ( Colour Rendering Index) of fixture shall be >70.4. CCT (Colour Co-related Temprature of fixture shall be 5700K + 300K). 5. System Lumen Efficiency shall be >100 Lm/W.6. 10 KV separate surge protection shall be provided as a part of fitting7. Lenses shall be modular type.8. PCB used shall be MC PCB type.9. CA No shall be written on each fitting before installation.10. The Name of Manufacturer to be emborssed on the fitting. |
| 141 | Note for Item No 132 to 139 Contd.. :-11. The fittings shall have arrangement so that maintenance required, if any can be carried out from top cover. 12.The defect libility period of LED lights shall be 05 years from the certified date of completion and the contractor shall replace/ repair the defective fitting with in 07 days after handing over the replacement. 13. A guarantee of 05 years shall be provided by contractor, supported by OEM covered all parts of luminaire. Contractor shall deposit security on this account @ 5% of work done against these items otherwise the same shall be deducted from the dues payable to him in RAR/ Final Bill. |
| 142 | S&F Bell, Ding Dong AC. 230 volts, single pole complete all as specified & directed. |
| 143 | S & F sheet metal enclousers with single pole and neutral 240 volt , 20/32 Amps, C- Series with two pin and earth plug and socket plug top complete with single pole MCBs complete all as specified & directed. |
| 144 | S & FSPN 8 waysheet metal enclosures factory made DB double door 230 V AC, 50 Hz AC 200 Amp rated bus bar complete all as specified and directed |
| 145 | Supply and fix in repairs Sheet metal enclousre for DBs double door single pole and neutral with 200 amps rated bus bar of 12- way, 240 volts complete all as specified and directed. |
| 146 | Supply and fixing in repair MCB single pole and neutral 63 Amps, 240 volts, B-series complete all as specified and directed. |
| 147 | Supply and fixing in repair MCB single pole 6 to 32 Amps, 240 volts, B-series complete all as specified & directed.. |
| 148 | M&L for earthing complete with galvanized steel earth plate electrode 60cmX60cm X6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0mm dia by means of nuts bolts, washers, check nuts of iron or steel includingPCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I complete all as specified & directed. Note:- 1. Earth lead & protection pipes upto & including 7.50 metre length is deemed to be included in the unit rate quoted by the contractor.2. Earth filling should be free from stones, boulders, aggregate, gravels etc |
| 149 | Taking down ceilling fan by disconnecting from ceilling rose, dismaintling blades & re-hanging in position after cleaning including reassembling of blades, making of electric connections using flexible copper conductor cable and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 150 | Taking down ceiling fan/exhaust fan, sealing cable end, dismatling blades and removing fan and blades and re fix the same position after servicing including minor repairs by repalcement of capacitor, safty pin, cap, nuts & bolts etc and making connection using 3 core, 0.50 sq mm PVC insulated and overrall sheathed flexible copper conductor cable from ceiling rose to fan, including testing to ensure efficient functioning including application of one coat of synthetic enamel paint by spray painting & rewriting number complete all as specified and directed. |
| 151 | M&L for modular point wiring for one light/fan/bell point controlled by one switch complete with 1.5 Sqmm multistranded FRLSPVC insulated unsheathed, FRLS, multistranded copper conductor cable 1100 volts grade (red, yellow & blue) in and including medium duty non metallic rigid PVC concealed conduit 20 mm dia including conduit accessories like bends, tees junction boxes etc fixed concealed/recessed in wall or ceiling etc including 1.5 Sqmm single core FRLS PVC (green) insulated unsheathed multi stranded copper conductor 1100 Volts grade as earth continuity wire connected to earth dolly matching with surrouding with modular sunken steel boxes zinc oxide plated of suitable size including modular sheets of suitable module and back plates etc. complete all as specified and directed.Note: The unit rate quoted include the cost of cutting chases in surfaces for conduits and fixing of sunken boxes and making good the distrubed surfaces to match the existing surfaces. |
| 152 | All as per description of serial item No. 149 here in before but one 5 pin socket out let 5/6 Amps on same board with other switches. |
| 153 | All as per description of serial item No. 149 here in before but one 5 pin socket out let 5/6 Amps on sindependent board |
| 154 | All as per description of serial item No. 149 here in before but for 2 in 1, 15/16 ampmultipurpose socket outlet/metal plug top/ with 2.5 sqmm FRLS cable PVC insulated unsheathed multistrand including 2.5 sqmm FRLS PVC insulated copper wire for earth continuity on independent board complete. |
| 155 | All as per description of serial item No. 149 here in before but for 2 in 1, 15/16 ampmultipurpose socket outlet/metal plug top/AC with 2.5 sqmm FRLS cable PVC insulated unsheathed multistrand including 2.5 sqmm FRLS PVC insulated copper wire for earth continuity on independent board complete. |
| 156 | S&F in repairs modular switch, one module,1 way, 10 Amps 240 volts complete all as specified and directed. |
| 157 | S&F in repairs modular switch, one module,1 way, 16 Amps 240 volts complete all as specified and directed. |
| 158 | S&F in repairs modular bell push 6A, 240 volts, 1 Module complete all as specified and directed. |
| 159 | S&F in repairs modular socket 6A, 240 volts 2 & 3 pin,2 Module complete all as specified and directed. |
| 160 | S&F in repairs modular socket, 6A & 16A, 240 volts, 2 & 3 pin, 2 Module complete all as specified and directed. |
| 161 | S&F in repairs modular step type fan regulator 120W, 240 volts,2 Module,complete all as specified and directed. |
| 162 | Supply, assembling and hanging, in repair, ceiling fan 1200mm sweep, having wider aluminium blades for better air thrust, down rods, Blade angle 8.5˚, double ball bearing,high grade copper wiring not less than 160 grams, powerfull motor with energy saving upto 60% fan starting at 140 Volts, service value minimum 7.2 Cum/ min, Min air delivery 215CMM, BEE five star rated, brushless direct current motor (BLDC) with inverter compatibilty, 30W Power draw and Eco active techology, RPM not less than 350 including hook clamp with rubber reel, canopies, capacitor and making connection to ceiling rose or connector including taking down old unserviceable ceiling fan and deposited to MES yard of AGE E/M complete all as specified and directed. Note:- Necessary T&P, ladder etc for hanging ceiling fan shall be arranged by the contractor at his own cost. This aspect shall be kept in mind while quoting the rate. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
