|
| 1 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm. after preparation of old wall M&L |
| 2 | Supplying & applying double coat oil bound distemper over one coat of alkali resistant priming paint after preparation of old wall surface by brooming down, steel wire brushing, scraping down smoke spot, moulds, moss, efflorescent salts, trading oil, greasy spots. Make Asian, Berger, ICI. M&L |
| 3 | Supplying & applying double coat plastic emulsion paint over one coat of priming paint after preparation of old wall surface by brooming down, steel wire brushing, scraping down smoke spot, moulds, moss, efflorescent salts, trading oil, greasy spots. Make Asian, Berger, ICI. M&L |
| 4 | Suplying & aplying one coatsynthetic enamel paint on wooden surfaces after preparation of old surface. M&L |
| 5 | Suplying & applying one coatsynthetic enamel paint on steel surfaces after preparation of old surface. M&L |
| 6 | Supplying & applying of two coat white wash after preparation of old wall. |
| 7 | Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth. |
| 8 | Cutting holes into or through brick walls built in cement mortar or cement lime mortar and stone walls built in cement mortarand making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required for removal of wild growth. Superficial area n.exc 150 sqcm. |
| 9 | Taking down old cement plaster from brick/concrete wall of any description and nature at any place, position |
| 10 | Rendering12 mm thick on fair face of brick work with cement plaster 1:6 complete in all respect including . Making smooth & finish without using extra cement. |
| 11 | Dismantling of Stone slabs and tiles laid, bedded & pointed in cement mortar.of any description or thickness in floors, aprons etc. |
| 12 | Supplying and fixing Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white cement to match. White Tiles |
| 13 | Supplying and laying Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement to match.White tiles |
| 14 | Screed bed or bedding layer of cement mortar (1:4) 15 mm thick for laying floor finishes. M&L |
| 15 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. |
| 16 | Only fixing & repairing of existing Anodised aluminium snap grid frame work or G.I. frame work for false ceiling. |
| 17 | Supplying & fixing 12mm thick Perforated particle board/ tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixedon snap grid. |
| 18 | Supplying & fixing PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls. Including dismantling of existing pipe if any. 110mm dia |
| 19 | Supplying & fixing PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls. 75mm dia |
| 20 | Supplying & fixing PVC (SWR) bends any radius. 110mm dia |
| 21 | Supplying & fixing PVC (SWR) bends any radius. 75mm dia |
| 22 | Supplying, making & fixing Plain, solid, straightchowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinnedat joints,suppliedandfixed. Including removal of old frame if any 2nd class hard wood |
| 23 | Supplying, making and fixing Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides including taking out of old door if any 40mm Thick |
| 24 | Supplying & fixing Mortice 4 lever brass lock, vertical type, size 100 mm |
| 25 | Supplying & fixing Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including removal of old item if any. |
| 26 | Supplying & fixing 150mm mild steel barel tower bolts, |
| 27 | Supplying & fixing 125mm Butthinges, heavy weight, cold rolled mild steel, and fixed |
| 28 | Supplying & fixing 150mm Mild steel pressed handles, oval type, stove enamelled black |
| 29 | Supplying, fabricating & fixing Powder coated Coloured or plane aluminium (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 30 | Providing and fixing Powder coated coloured or plane aluminium (minimum thickness of powder coating 50 micron) for shutters (any type) of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Chief Engineer-in-Chief. |
| 31 | Supplying, fitting & fixing 5.5 mm thick Sheet glass, one way glass or plane glass and glazing with oil putty in square exc 0.5 sq. m in each pane |
| 32 | Only repairing & fixing of Anodised aluminium door window shutters, including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified |
| 33 | Supplying & fitting 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed |
| 34 | Supplying & fitting 20mm dia steel Tubes Medium grade galvanised, with all fitting and fixed complete to walls, ceilings or laid in floors or connecting with existing water pipe line. M&L |
| 35 | Supplying & fitting 15mm dia steel Tubes Medium grade galvanised, with all fitting and fixed complete to walls, ceilings or laid in floors or connecting with existing water pipe line. M&L |
| 36 | Supplying & fitting 15mm dia Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms |
| 37 | Supplying & fiting 15mm dia Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms) |
| 38 | Supplying & fitting 15mm dia Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) |
| 39 | Supplying, fitting & fixing Vitreous China Wash down water closet (Pedestal pattern), including cover white colour complete in all respect |
| 40 | Supplying fitting & fixing Water closet (Squatt pattern) com plete including provision of lime concrete bedding including necessary trap after dismantling of old panvitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests. |
| 41 | Supplying & fixing 10 liter Capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets & flush pipe. |
| 42 | Supplying & fixing Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device. M&L |
| 43 | Supplying & fitting Vitreous China wash basin, white, flat back, size 550x400 mmincluding brackets. M&L |
| 44 | Supplying & fixing 32mm dia Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms) |
| 45 | Supplying & fitting PVC connections 15mm size with PTMT nuts of length 600mm |
| 46 | Dismantling of Brickwork built in cement mortar or cement lime mortar or cement concrete including all quoins, arches, pillars, etc, complete in all respect. |
| 47 | Brickwork with sub-class \"B\" bricks, straight or curved on plan exc. 6m mean radius built in : Cement mortar 1:4. M&L. |
| 48 | Casting Cement concrete in foundations, filling and mass concrete. Typr B2, 1:2:4, 40mm graded aggregate. M&L |
| 49 | Dismantling wrought iron or mild steel work of any description. |
| 50 | Only fabrication, repairing, erection & fixing Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering or any other mild steel work. |
| 51 | Supplying & fixing Wire netting of stainless steel wire 1.4mm dia fixed with tinned tacks of stainless steel wirestaples (Size of mesh 12mm) including taking out old cloth if any. |
