Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 23-12-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 30-12-2025 |
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.50 sqm each complete all as specified and directed. |
| 2 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm and n.exc 4 Sqm each complete all as specified and directed. |
| 3 | Demolition of brick work built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings dressed stonework and pre cast concrete articles and removal of debris/rubbish off the premises etc complete all as specified and directed. |
| 4 | Taking down cement plaster on brick walls or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises complete all as specified and directed. |
| 5 | Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thick (below or above ground level) and removal of rubbish beyond MOD land complete all as specified and directed. |
| 6 | Taking up or down steel water tubing and connections including cleaning for refixing of pipe 20mm bore dia all as specified and directed. |
| 7 | All as per item Ser No 6 here above but 15 mm bore |
| 8 | Demolition of cement concrete (reinforced) of any description and in any position not specifically providedcomplete all as specified and directed. |
| 9 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etccomplete all as specified and directed. |
| 10 | S&F Factory made single extruded WPC solid door Frames / Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers and non toxic additives fabricated with miter joints (after applying PVC solvent cement and screwed with full body threaded star headed SS screws ) resistant to spread of flame, termite / borer proof , water / moisture proof and fire retardantcomplete all as specified and directed. |
| 11 | S&F pressed steel frames for doors/windows of size size 125x60 mm (1.25mm thick MS sheet)with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, duly filling of cement concrete 1:3:6 type C-0 (using 12.50 mm graded crushed stone aggregate) to back of chowkhats and two coats of synthentic enamel paint complete all as specified and directed. |
| 12 | S&F pressed steel frames for doors/windows of size size 105x60 mm (1.25mm thick MS sheet)with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, duly filling of cement concrete 1:3:6 type C-0 (using 12.50 mm graded crushed stone aggregate) to back of chowkhats and two coats of synthentic enamel paint complete all as specified and directed. |
| 13 | S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grain printedPVC sheet used instead f plain colour PVC sheet & edges will be painted to matc wit printed sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing |
| 14 | S&F 35mm thick factory made plain framed panelled shutters of2nd class hard wood, one panels with lock rail and panel of 9mm thick BWP commercial ply or 12mm veneered particle board with commercial veneering on both face.The size of rail and stile as per IS-1003 (Part-I)(Larger size to be provided) Kiln seasoned and chemically pressure treated fitted to chowkats complete all as specified and directed. |
| 15 | S&F 2nd class hard wood 35mm thick glazed and skeleton door shutters factory made, open rebated and prepared to receive glass or gauge etc with rounded, chamfered or mitred sash bars edges of framing plain chamfered or rounded fitted with cut and mitred beads and fitted to chowkats for securing glass/gauge, size of stiles rails and other parts as per section 8 clause 8.20 (a) of SSR Part-I (larger size to be provided)complete all as specified and directed |
| 16 | M & L preparation of new wood or wood based surfaces of any descriptionover 10 cm width or girth and applying two coats of synthetic enamelpaint over a coat of pink primer complete all as specified & directed. |
| 17 | S&F factory made18mm thick WPC (wood plastic composit boards) sheet one side prelam sheet and other side wood nature colour for cupboard shutter of density 600 kg/cm3 bent 90 with 100% termite/water proof, fire rertradent, Eco friendly and finish at all edges at level for making edges lippingusing binding tape etc as in Kitchen cupboard, Cabinet etc complete all as specified /Manufacturer\"s specification and directed |
| 18 | All as per Srl item No 17 above but both side white board without printed. |
| 19 | S&F Factory Made Solid PVC Moulded door Shutter With wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded woodgrain collured prelaminated PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 20 | S&F framed work such as grills, gratings, manhole\"s cover etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks,cooler stand and similar workfor portions framed and hung as gates including pintle hinges, stops, hand made sliding bolts etc incluidng one coats of primer and two coats of synthetic enamel paint conforming to Fe.290.Gde-E-165 complete all as specified & directed. |
| 21 | S&F Box type Steel windows and ventilators comprised of tubular frameand shutters made out of 1.25mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter with side hung shutters with steel handle and steel peg staydovetailedor welded including 2 Nos tower bolts 150mm long for each leaf and 10mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks (1:2:4 type 12.50mm graded crushed stone aggregate) including 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/galzing pins squres n.exc 0.5 sqm in each plane, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.4mm and fixed with stainless steel wire staplesincluding two coats of synthetic enamel paint over a shop coat of red oxide primer etc. all as shown on drg No CEPZ /TD-354/09 sheet 1/3 to 3/3 complete all as specified and directed. |
| 22 | M & L preparation of old wood or wood based surfaces of any descriptionover 10 cm width or girth and applying two coats of synthetic enamelpaint complete all as specified & directed. |
| 23 | M&L for preparation old steel or iron surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paintcomplete all as specified and as directed. |
| 24 | M&L for preparation of new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved shade over a coat of red oxide primer not otherwise described including rubbing out and cleaning rust on new steel surfacescomplete all as specified and as directed. |
| 25 | S&F in repair for Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & directed. |
| 26 | S&F 100 mm size butt hinges (as per sample) medium weight, cold rolled mild steel complete all as specified and directed. |
| 27 | S&F 300 mm long aluminium alloy, sliding door bolt withhasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed. |
| 28 | S&F aluminiumanodized barrel tower bolts 200 mm of extruded section (as per sample) fixed complete all as specified and directed. |
| 29 | S&F 150 mm size aluminium alloy handles, febricated type extruded section(as per sample), complete all as specified and directed. |
| 30 | S&F 300mm, ordinary rat tail door springs for door closer, complete all as specified and directed. |
| 31 | S&F 100mm hasp and staples,mild steel, wire type stove enamelled black including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 32 | S&F 25mm curtain rails anodised aluminium alloy with brackets, end bulbs, fancy type, fixed in position (as per sample)complete all as specified and directed. |
| 33 | Brick work with fly ash bricks (Old Size bricks)straight or curved on plan exc 6 mtr mean radius built in CM 1:6complete all as specified and directed. |
| 34 | Brick work with old brick retrived from demolition here in before (Old Size bricks)straight or curved on plan exc 6 mtr mean radius built in CM 1:4complete all as specified and directed. |
| 35 | M&L for Rendering 10mm thick on fair faces of brick work, concrete sruface in cement mortar (1:6), finished even and smooth without using extra cement complete all as specified and directed. |
| 36 | M&L for Rendering 5mm thick cement plaster on fair faces of brick work, concrete sruface in cement mortar (1:3) as in ceiling finished even and smooth without using extra cement complete all as specified and directed. |
| 37 | M&L for rendering 15 mm thick cemet plster on fair faces of brick work or concrte surfacesin CM 1:4 in two layers (5mm finishing layer over 10mm base layer) finished even and surface without using extra cemen with WPC over finishing layercomplete all as specified and directed.Note: WPC shall be measured and paid seperately) |
| 38 | M&L for rendering or plastering 10 mm thick in CM 1:3 in fascia / edging / ceiling of Chajjas,roof projections, drainge etc and making the edges in line, in true shape and finishing the surface without using extra cement complete all as specified and directed. |
| 39 | M&L for preparation of new plastered surface of external wall and chajjas,making surface smooth using sand paper, priming the surface with alkali resistance primer paintfor external surface, applying one coat of wall care putty and two coats of exterior emulsion (weather coat) paint complete all as specified & directed. |
| 40 | M&L for preparation of new plastered surface of external wall by applying 2mm thick wall care putty and making the surfaace smoothapplying two coats of distemper oil emulsion over a coat of primer of new surface complete all as specified & directed. |
| 41 | M&L for applying one coat of wall care putty and three coats of white wash on surface of wall including preparation of new plastered surface complete all as specified and as directed. |
| 42 | M&L for three coats of white wash on surface of ceiling including preparation of new plastered surface complete all as specified and as directed. |
| 43 | M&L for preparation of old surface of wall complete removal of existing treatment and applying 2mm thick wall care putty over one coat of primer and making surface even and smooth and applying two coats of oil emulshion distempercomplete all as specified & directed. |
| 44 | M&L for complete removal of old existing treatment including preparation of plaster/unplaster surfaces ofwalls, chajja, fascia etc and applying one coat of external wall putty &two coat of exteior emulsion paint (weather coat) over a coa of primer any shade or colour complete all as specified and directed. |
| 45 | M&L for applying one coat of wall care putty and two caot of white wash on surface of wall including preparation of old plastered surface after complete removal of existing treatment complete all as specified & directed |
| 46 | M&L two caot of white wash on surface of ceiling including preparation of old plastered surface complete all as specified & directed |
| 47 | M&L for 60mm thickness M-35 grade Machine pressed precast concrete factory made interlockingpaver block confirming to IS-15658-2006 (topping thickness not less than 5mm thick with white cement and colour pigment non fadable epoxy coating) complete all as specified & directed. |
| 48 | M&L for 75mm thick PCC 1:4:8 typeD-2 (using 40mm graded crushedstone aggregate) as in sub floors, sub bases, floors and pavings etc complete all as specified and directed. |
| 49 | M&L for Sand filling under floors or in foundation in layers n exc 25mm thickincluding watering and consolidation complete all as specified and directed. |
| 50 | M&L forcement concrete 1:2:4 Type B1 (using 20 mm graded crushedstone aggregate) as seismic, plinth and similar bands, coping, kerbs, cills, steps, parapets, apex stones, bed plates, kerbs, railings upto 60 cm in height,water troughs and the like rounded or chamfered on edges including necessary form work complete all as specified and directed |
| 51 | M&L for PCC type C-1, 1:3:6 (using 20mm graded crushedstone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair including making joints not more than 2.5 m (or as directed) and at corner, filled with bitumen 85/25 and sand in ratio 1:2 by weight complete all as specified and directed. |
| 52 | M&L for vitrified tiles light shade 6mm to 8mm thick (Square or rectangular) polished, area of each tile not exceeding 0.72 sqm as in gloors etc set and jointed (joint free)in neat cement slurry and pointed in coloured cement laid over 15mm thick screed bed or bedding layer of mortar in CM (1:4) including dismantling existing surface complete all as specified and directed |
| 53 | M&L for vitrified tiles light shade 6mm to 8mm thick ( Square or rectangular) polished, area of each tile exceeding 0.72 sqm as in verticle surface /daddo/skirting and like, set and jointed (joint free)in neat cement slurry and pointed in coloured cement laid over 10mm thick screed bed or bedding layer of mortar in CM (1:4) including taking down existing surface, complete all as specified and directed |
| 54 | M&L for non skid joint free ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqmbut not exceeding 0.18 sqmin floor, skirting/dado or verticle surface etc set and jointed(joint free) in neat cement slurry and pointed in coloured cementover 15mm thick screed bed or bedding layer of mortar in CM 1:4 inculidng dismantling floor, hearth or walls tilling and terrazo topping including cement mortar bedding ( but not backing),rubish off the premises, complete all as specified and directed. |
| 55 | M&L for glazed ceramic coloured tiles in vertical surface 600x300x7mm or 450x300x7mm thick set and jointedin neat cement slurry and pointed in white or coloured cement to match over 10mm thick screed bed or bedding layer of mortar in CM 1:4 including dismantling floor, hearth or walls tilling and terrazo topping including cement mortar bedding ( but not backing),rubish off the premises complete all as specified and directed. |
| 56 | M&L for 20mm Granite work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed in cement mortar in CM 1:4 complete all as specified and directed. |
| 57 | M&L for green/black marble work 18-20 mm thick (table rubbed and polished) in cooking plateform,window cill, steps, stair case trade & riser etc in cement mortar (1:4), pointed in white cement (1:2) using marble dust with admixture of pigment to match with marble shade ofBhaislana Zebra complete all as specified and directed. |
| 58 | M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc., Brushing neat cement slurry with 3.0kg of cement per sq. meter complete all as specified and directed |
| 59 | M&L for Round chamfering to the edgesof marble/granite slabs not exc 15 mm wide complete all as specified and directed. |
| 60 | S&F15mm bore mild steel tubes medium grade galvanized ISI marked with all fittings, short pieces and fixed to walls, floor, ceiling etc complete all as specified and directed. |
| 61 | Refixing of old steel tubing 15 mm medium grade galvanized ISI marked with new all fittings short pieces and fixed complete to walls, floor etc complete all as specified and directed. |
| 62 | M&L for cutting chases, pinning in brick work,making good to facing where required, pointing in CM 1:3, cutting n.exc. 10cm in girth complete all as specified and directed. |
| 63 | S&F20mm bore tubes medium grade galvanized ISI marked with all fittings, short pieces and fixed to walls, floor, ceiling etc complete all as specified and directed. |
| 64 | Refixing of old steel tubing 20 mm medium grade galvanized ISI marked with new all fittings short pieces and fixed complete to walls, floor etc complete all as specified and directed. |
| 65 | S&F 15mm bore dia angle valve / stop valve cast copper alloy capston head chromium plated (as per sample), fancy type ISI marked with crutch or butter fly handles screwed down, screwed for iron pipe complete all as specified and directed. |
| 66 | S&F Stop valve concealed cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with crutch lever handle screwed both ends for iron pipe 15mm bore dia fixed in repair, complete all as specified and directed. |
| 67 | S&F 15mm bore dia Bib taps, cast copper alloy, chromium plated fancy typeISI marked (as per sample) with crutch or butter fly handles, screwed down, screwed for iron pipe complete all as specified and directed. |
| 68 | S&F Vitreous china wash hand basin, white flat back, size 550 x 400 mm (as per sample), including brackets, CP waste coupling and cutting for and pinning in ends of brackets or errecting standincluding 32 mm diawaste pipe complete all as specified and directed. |
| 69 | S&F in repair towel rail, brass, CP 600 mm long 20mm dia pipe of 1mm thick complete all as specified and directed. |
| 70 | S & F brass CP Shower rose with or without swivel joints,(any size) including fixing to steel pipe or union complete all as specified & directed. |
| 71 | S&F 600 mm x 450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed. |
| 72 | M&L for 15mm bore dia Brass CP center hole basin mixer suitable for mixing hot & cold water screwed down & 450mm long iron pipe and fixed cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed completeall as specified and directed. |
| 73 | M&L for wall mixer with over head Brass chromium plated telescopic shower rose 125mm size Brass CP mixer or mixing hot & cold water screwwed down iron pipe of 15mm bore pipe with or without swivel joints, including fixing to steel pipe or union complete all as specified & directed. |
| 74 | M&L for 15mm bore dia Brass CP sink centre hole basin mixer suitable for mixing hot & cold water screwed down & 450mm long iron pipe and fixed cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed completeall as specified and directed. |
| 75 | S&F Health foucet 8mm dia 1.20m stainless steel flexible hose with wall hook and making connection complete all as specified & directed. . |
| 76 | S&F in repairVitreous china wash down water closet pan pedestal pattern, white (excluding supply of flushing cistern and flush pipes, but including fixing thereof),including making connections to trap, and to flush pipe including plastic seat and cover with stainless steel or aluminised hinging device and fixed complete all as specified and directed. |
| 77 | S&F in repair Vitreous China squatting pan of orissa pattern, size 580x440mm white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern(including fixingofflush pipe) including provision of cement concrete bedding, in repair complete all as specified & directed. |
| 78 | PCC 1:5:10 type E-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete (sunken floors etc) complete all as specified and directed. |
| 79 | Rendering 15mm thick on brick work or concrete surfaces in CM 1:4 mixed with water proofing compound to sunken portion with proper slope towards outside, finishing cement concrete or brick work surface even and smooth using extra cement, provide 90 micron polythene film duly applying bitumen coating @ 3.00 Kg/Sqm complete all as specified and directed. Note: WPC shall measured and paid for separately. |
| 80 | S & F 10 litre capacity PVC valveless, low level, synphonic action type, flushing cistern, with inlet, ball valve, float valve, handle including brackets including 32mm dia PVC flush pipe of suitable size and making necessary connections to water supply pipe line and jointing to WC,complete all as specified and directed. |
| 81 | S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 82 | Rotational moulded polyethlene water storage tanks of capacity exc 500 litres three layers(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float and including dismantling of existing RCC/PVC tank of any capacity complete all as specified & directed. |
| 83 | M&L for Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layers, Capacity 1000 litres, ISI Marked including all accessories, hoisted and fixed in position including 20 mm dia ball brass valve all as specified in SSR Part-I including dismantling of existing RCC/PVC tank, description and removal beyond MOD landcomplete all as specified and directed. |
| 84 | S&F in repair 20 mm size gun metal globe or gate valves with iron wheel head, screwed both end for iron pipe and fixedcast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 20mm bore complete all as specified and directed. |
| 85 | S&F in repair corner glass shelf assembly (as per sample) consisting of 5.5mm thick sheet glass size not less then 300x300x70mm with chromium plated brackets double guard and railing complete all as specified and directed. |
| 86 | S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide (as per sample) with chromium plated brackets double guard and railing 60cm long, complete all as specified and directed. |
| 87 | S&Fin repairSS grating ( as per sample ) 100 mm dia complete all as specified and directed. |
| 88 | S&F in repair stainless steel kitchen plate rack of size 750 x 900 mm not less than 1mm thick sheet thickness of approved make fixed with mild steel screw complete all as specified and directed. |
| 89 | S&F sinks double Bowl square made of stainless steel 1mm thickkitchen with plugs, washers , PVC waste pipe including waste copling; bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915x460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 90 | S&F in repair 75mm bore dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls or in floor with clamps, complete all as specified and directed. |
| 91 | S&F in repair 110mm bore dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls or in floor with clamps, complete all as specified and directed. |
| 92 | S&F in repair 110mm bore dia PVC (SWR) reducers, complete all as specified and directed. |
| 93 | S&F in repair 110mm bore dia PVC (SWR) bends,any radius (larger bore measured), complete all as specified and directed. |
| 94 | S&F in repair 75mm bore dia PVC (SWR) bends, complete all as specified and directed. |
| 95 | S&F in repair cast iron 75mm bore Branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, fitted with ovel access doors, fixed in repair complete all as specified and directed. |
| 96 | S&F in repair 75mm bore pipe PVC (SWR) vent cowl, complete all as specified and directed. |
| 97 | S&F in repair 110mm bore pipe PVC (SWR) vent cowl, complete all as specified and directed. |
| 98 | S&F in repair CI floor trap 75mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with or without hole for waste pipe complete all as specified and directed. |
| 99 | S&F in repair CI floor trap 100mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with or without hole for waste pipe complete all as specified and directed. |
| 100 | S&F TMT bars bars 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified & directed. |
| 101 | All asper srl item No 100 above but6 to 8mm dia. |
| 102 | M&L for Providing, precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates), as in cover slabs (for septic tanks, manholes and the like) and similar articles including necessary moulds/fromwork etc, set and jointed in cement mortar (1:6) complete all as specified and directed. |
| 103 | M&L 20 mm thick cement plaster in cement mortar 1:4 on brick or concrete surface of sunken floor finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement complete all as specified & directed (WPC shall be measured and paid separately) |
| 104 | Material and labour for preparation of surfaces and apply first of coat Fiber reinforced elastomeric liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibers with Sun Reflective Index (SRI) of 100-110, having minimum elongation of 350%, tensile strength of 2.9 Mpa and shall have cracks bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic pressure & reduce surface temperature upto 10 degree Celsius with 33% dilution of priming coat. Laying of fiber mesh of 0.3mm thickness weave in leno pattern having 45 gsm/sqm and pasting it properly with overlap of 50mm and allow it to dry. Apply second of undiluted coat @ 0.45 ltr/sqm. Apply third and final coat undiluted @0.45ltr/sqm complete application to be done by the manufacture or authorised applicator complete all as specified and directed by Engr-in-Charge. |
| 105 | Note for item No 104 :-(a) Cleaning of dust, removal for all loose existing bituminous material manually with heat torch gun to get smooth plain finished surface, removing of vegetation/plantaion with no loose material on surface.(b) Conduct ponding test after 7 days, continnue curing of 14 days.(c) All Shifting/ removing of any wire/cable/AC unit/Water tank of any capacity or other any object as per site requirement an re-fixing the same, if needed shall deemed to be included in the quoted rates by the contractor. (d) Removal of any loose/packed items such as mud phuska, terrace tiles, cement screed bed shall be removed and surface shall be made free from depressions before applying treatment to the roof. Quoted rates shall deemed to be includedthis fact into account and no extra payment shall be made on this account. (e) Contractor shall verify availability of the materials in full qty from market before quoting the rates as no extension of time on this ground shall be granted.(f) All the sample/ make for water proofing material mentioned in item shall be got approved from the GE before procuring bulk quantity of material. |
| 106 | Supply only liquid water proofing compoundcomplete all as specified and directed. |
| 107 | Cutting into existing manholes for connecting new drains for ineternal dia of pipe 150mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed. |
| 108 | Writing letter or figures (Block, Roman, Italic or Indian) n exc 30 cm high complete. The colour of paint and dimension of letter shall be used as approved by the Engr-In-Charge. |
| 109 | S&F Continuous (piano) hinges, 30mm width of flaps (when open) mild steel, bright finish or electrogalvanised (as per sample) complete all as specified and directed. |
| 110 | S&F factory made 5mm thick WPC board one side prelam sheet for kitchen cabinet/cupboard of density 600 kg /Cum,90° bent completeall as specified and directed. |
| 111 | S&F 150 mm size stainless steel brignt finish handle (as per sample), fixed with nut and bolt /screws complete all as specified and directed. |
| 112 | S&F Telescopic type Side channel of drawer of standard size including roller for moving drawer made out of mild steel bright finish or electro galvanised ( soft close ball bearing runners) with width of flap 30mm & 60mm long completeall as specified and directed. |
| 113 | S&F stainless steel (304 grade) plain basket of size 17\"\"x20\"\"x6\"\" (as per sample), complete all as specified and directed. |
| 114 | S&F Stainless steel (304 grade) partition of size 17\"\"x20\"\"x6\"\"(as per sample), complete all as specified and directed. |
| 115 | S&F Stainless steel (304 grade) cutlery of size 17\"\"x20\"\"x6\"\"(as per sample), complete all as specified and directed. |
| 116 | S&F Stainless steel (304 grade) cup & soucer of size 17\"\"x20\"\"x4\"\" (as per sample),complete all as specified and directed. |
| 117 | S&F Stainless steel (304 grade) plate basket of size 17\"\"x20\"\"x6\"\"(as per sample), complete all as specified and directed. |
| 118 | S&F Stainless steel (304 grade) auto, zero crank hinges, fency type(as per sample), with concealed pattern fitted to shutters completeall as specified and directed. |
| 119 | S& F Magnetic catcher(as per sample) fixed with Nut and boltcomplete all as specified and directed. |
| 120 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including unscrewing from board fitting and fixturesuch as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody for reuse if serviceable or for taking credit and making good disturbed surfaces of walls, floors, etc with cement moratr and finishers to match existing surface complete all as specified and directed. |
| 121 | Point wiringusing 3x1.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade (Phase, neutral and earth wire) with proper colour coding drawn through and incl PVC rigid concealed conduit medium grade (ISI Marked) of dia not less than 20mm and 1.5mm thick and connected to common earth dolly with and including 1.6mm thick GI/MS modular sunken box of required size with support frame (inner/outer) for mounting modular switch , sockets etc including cutting chases grooves for concealed wiring for light/fan/bell point controlled by one switch and making good (in CM 1:4) the surface as per existing complete all as specified and directed. |
| 122 | All as per Ser item No 120 but for one two light point controlled bytwo 2 way switch. |
| 123 | All as per Ser item No 120 but for one5/6 Amp socket outlet point on same board controlled by one switch. |
| 124 | All as per Ser item No 120 but for one5/6 Amp socket outlet points on independentboard controlled by one switch. |
| 125 | All as per Srl item No 120 here-in-before for one 15/16 amp socket point with 3x2.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor. |
| 126 | Supply & fix in concealed or fixed on wall of rigid non-metallic PVC conduit of size 25 mm dia, exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and as directed. |
| 127 | S&Fmodular switch one way 10 Amp one module, front operated complete all as specified and directed. |
| 128 | S&Fmodular socket 6 Amp, 2/3 pin, with shutter2 module, complete all as specified and directed. |
| 129 | S&Fmodular switch one way 16 Amp one module, front operated complete all as specified and directed. |
| 130 | S&Fmodular socket 6/16 Amp, 6 pin multipurpose with shutter2 module, complete all as specified and directed. |
| 131 | S&F Modular Bell push switch, 6 Amp, AC 230 Volt, 1 Module complete all as specified and directed. |
| 132 | S&F Bell Ding Dong AC 230 Volt, single Pole etc complete all as specified and directed. |
| 133 | S&F fan regulator modular step type suitablefor 1200/1400mm sweep ceiling fan hum free, 100W- 2 module including necessary connections complete all as spd and directed. |
| 134 | S&F ceiling rose PVC/polycarbonate, insulated body surface Bakelite 65mm dia three terminals. |
| 135 | S&FLamp holder jumbo modular type, PVC/Polycarbonate type with back plate suitable for batten fitting including 15 W LED Lamp complete all as specified. |
| 136 | Taking down carefully unsv copper/aluminium sub main wiring of any size including old broken steel/PVC conduit, removing materials to store for keeping in safe custodyfor taking credit complete all as specified. |
| 137 | M & L for sub Main Wiring with two single core FRLS PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x4 Sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 4 Sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn drawn in and including suitable size concealed rigid medium grade PVC conduit not less than 25mm dia 1.5mm thickwith all accessories incl cutting chases on wall andmaking good to the disturbed surface of wall/floor with cement mortar and finishes to match existing surface complete all as specified and directed. |
| 138 | All as per Ser Item No 136 but of size 4x10 Sqmm with one single core PVC insulated multistranded unsheathed flexible copper conductor 10 Sqmm size (green colour) drawn in existing concealed conduit. |
| 139 | All as per Ser Item No 136 but of size 2x6 Sqmm with one single core PVC insulated multistranded unsheathed flexible copper conductor 6 Sqmm size (green colour) drawn in existing concealed conduit. |
| 140 | S&F in replacement of AC three phase static energy meter of Accuracy class 1.0, 3x240 Volts, 50 Hz, with backlit LCD display, of rating 10-60 Amps (measures & displays KWH, V, I, KW ,PF, last month history of KWH & MD in KW) with special features like TOD, Temper logging, Optical communication port & display in absence of power complete all as specified and directed. |
| 141 | S&F in replacement of cable FRLS PVC insulated and unsheathed multistranded copper conductor 1100 Volts grade single core of size 1.5 Sqmm cut to pieces in colour coding as directed complete all as specified and directed. |
| 142 | Disconneting & taking down ceiling fan / exhaust fan any type/ cap refixing to the same/other location after replacing rubber reel, fixing bolts and nuts with lock pins, connectors complete all as specified and directed. |
| 143 | Disconneting & taking down geyser any type/capacity complete,refixing to the same/other location with all connected accessories afer cleaning replacing anchor bolts complete all as specified and directed. |
| 144 | S&F 20W surface / wall mounted box type batten LED fitting having polycarbonate housing and diffuser and integrated electronic driver with system luminous efficacy ≥ 100 lumens/Watt operating voltage 140V-240V complete with all accessories internally prewired and including connecting up with suitable size flexible copper conductor cable from ceiling rose to connector of LED fitting complete all as specified and directed. |
| 145 | All as per ser item No 143 but for 10 W LED batten fitting 2 feet long. |
| 146 | MCB DB, TPN, 6 way sheet metal enclosures double door 415 V AC, 50 Hz AC with IP 43 and IK 09 rating having fully insulated copper busbar, neutral bar, earth bar and cable ties for cable management including polyuthrene gasket complete complete in all respect flushed in wallincluding cutting chases on wall for taking out old unsv DB and fixing of new DB and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, painting the plastered surface with same colour complete all as specified and directed. |
| 147 | S&Fsurface mounted, bulk head LED luminaire 10 W with and integrated electronic driver with system luminous efficacy ≥ 100 lumens/Watt operating voltage 140V-240V, IP 65 protectioncomplete with all accessories internally prewired and including connecting up with suitable size flexible copper conductor cable from ceiling rose to connector of LED fitting complete all as specified and directed. |
| 148 | S&Fround/square shaped LED 15Watt recessed/ surface mounted type panel,220 volts AC with Polycarbobnate housing and high efficiency diffuse for glare free light complete with drivers, mounting clips suitable for roof ceiling including connecting up suitabel size flexible copper conductor cable complete all as specified and directed. |
| 149 | S&Ffancy type wall/surface mounted decorative light fitting with brushed nickle finish fixture and opal glass decorative diffuser, B-22 type lamp holder and wall mounting arrangment including 9W LED lamp and connecting up with suitable size flexible copper conductor complete all as specified and directed. |
| 150 | S&F decorative wall mounting LED bed side light 3 watt 3000K fittinghaving flexible neckand mounting clips incl connecting up with suitable size flexible copper conductor cable complete all as specified and directed. |
| 151 | S&Fwall mounted three blade, size 400mm sweep, double bearing copper wounded fan AC single phase 230/240 V having 1400 ± 100 RPM with an air delivery rate upto 65 + 5 cubic meters per minute with three -speed control and pull cord mechanism incl wall mounting arragngement and connecting up with three core twisted flexible copper conductor cable for suitable size complete all all as specified and directed. |
| 152 | Supply and fixing of 5 star rated BLDC (Brush less direct current motor) ceiling fan 230 volts,single phase of 1200mm sweep duble ball bearing tyoe with minimum air delivery 210 CFM & service value shall not be less than 6.0 B.E.E including blade, down rod, bldc refulator and canopy cover etc, including connecting with 3 core flexible copper conductor cable of size 0.50 Sqmm and including writing of MES Number with synthetic enamel paintcomplete all as specified and directed. |
| 153 | S&Fof exhaust fan 250mm sweep, copper wounded sturdy engineering plastic body fan AC single phase 230/240 V having 1200 ± 50 RPM including louvers shutter and fixed with grounting nut & bolts and making the suitable hole of sutiable size by breaking the existing wall and making good the disturbed surface by plastering and matching with existing specifications with suitable finishes as per site requirement complete all all as specified and directed. |
| 154 | S&F distribution board iron clad, double door with IP-43 1K-09 protection suitablefor MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar and neutral link complete with one MCCB 3 pole 415 V, 63 Amps, 16 kA of the same make as of distribution board, making connection with suitable size thimbles & including cutting chases to wall for fixing DB and making good the disturbed wall surface in CM 1:4 to match the surface as per existing complete all as specified and directed. |
| 155 | S&F MCB SP 240V, 50Hz of rating6 to 32 Amp, \"B\" curve using suitable size copper thimbles complete all as specified and directed. |
| 156 | S&F MCB SPN 240V, 50Hz of rating40 to 63 Amp, \"C\" curve using suitable size copper thimbles complete all as specified and directed. |
| 157 | S&F MCB TPN 415V, 50Hz of rating 63 Amp, \"C\" curve using suitable size copper thimbles complete all as specified and directed. |
| 158 | S&F modular MCB 25Amps andmodular socket 25 Amps mounted on 3 module frames (inner & outer) complete all as specified and directed. |
| 159 | S&F LED wall security lights of 35 Watt, 230 V having pressure die cast aluminium housing with system lumens efficacy≥100 lumen/W,IP65 protection, IK07 rating,inbuilt electronic driver withPF>0.95 incl GI bracket of suitable dia bend to shape and fixed to wall by means of clamps or nuts bolts and connecting up with three core twisted flexible copper conductor cable complete all as specified and directed. |
| 160 | Supply, laying and testing ofXLPE insulated, screened, PVC beded galvanized steel srtip or wire armoured, electric cable heavy duty 1100 Volts gradewith standed aluminium conductor of size 70 Sqmm 3.5 core, complete all as specified and directed.(Note : All disturbed surfaces of wall/floor/drain/tiles/road etc shall be repaired to match with existing specification is included in quoted rates) |
| 161 | Excavation in trenches in any type of soil not exceeding 1.5 m wide and n.exc. 1.5 m deep and getting out for laying of cables complete all as specified and directed. |
| 162 | Returning filling, in including spreading , levelling, watering and well ramming in layers not exc 25 cm each complete all as specified and directed. |
| 163 | Removing excavated material to a distance n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed. |
| 164 | M&L for sand filling in trenches as cushion to under ground cables 8 cm thick before laying the cable and 15 cm thick when cables are laid and tested complete all as specified and directed. Note: Only punned thickness i.e 18cm shall be measured and paid. |
| 165 | M&L for Sub class ‘B’ bricks (fly ash bricks) old size laid dry, flat over the cable abutting each other, length of cable equal to width of brick complete all as specified and directed. |
| 166 | 40mm dia GI tubing, light grade with all fitting laid in trenches or fixed on wall/under road/ floor or pole by means of GI/MS clamps, nut bolts and washers complete all as specified and directed. |
| 167 | S&F modular switch two way 6 Amp one module, front operated, complete all as specified and directed. |
| 168 | M&L for Earthing complete with galvanised cast iron earth plate electrode of size 600x600x6mm thick as earth electrode with top edge of the earth plate not less than 1.5mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit alongwith angel iron 40x40x3mm frame and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the earth plate, earth work in any type of soil remaing surplus excavated material all as required at site and specified in EP No 3 of SSR part I or directedand testing on completion. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
