|
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out all soft /loose soil complete all as specified and directed. |
| 2 | M&L for Cement concrete 1:4:8 type D-2 using 40mm grade in foundations, filling and mass concrete complete all as specified and directed |
| 3 | Removing excavated m soil material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point and taking out from MOD land complete all as specified and directed. |
| 4 | Returning filling of soft/loose including spreading, levelling, watering and well ramming in layers n exc. 25cm etc complete all as specified and directed. |
| 5 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment , gusset plates or Flange connection, riveting etc, n exc 10 kg each brackets, conforming to Fe 290 Gd 165 complete all as specified and directed |
| 6 | S & F of Steel work in tubular post/rafter/purlin including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 etc as in post/pillar complete all as specified and drected. |
| 7 | M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement etc complete all as specified and directed. |
| 8 | M&L for preparation of newly surface of iron/steel with two coats synthetic enamel paint over a coat of red oxide primer etc. complete all as specified and directed |
| 9 | M & L forSurfaceExcavationn exc 30 cm deep and averaging 15 cm deep & getting out in soft/loose soil comlete all as specified and directed. |
| 10 | M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint of approved colour over a coat of primer at any height (n.Exc 8 m )incl necessary scaffolding /Centreing etccomplete all as specified and directed. |
| 11 | M & L for RCC M-25 (Design Mix) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed |
| 12 | M & L for RCC M-25 (Design Mix) as in Columns, pillars, piers, posts and struts complete all as specified and as directed. |
| 13 | Use and waste for form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for fair finished surfaces complete all as specified and directed. |
| 14 | Use and waste for form work to sides of pillars, posts, struts, columns for rough finished surface of concrete complete all as specified and as directed. |
| 15 | S&F purpose made crew bolts with hexogonal or square heads at one end and screwed the other , or screwed both ends , each screwed end to be fitted withwashers and one hexogonal or square nut 16-20 mm dia and exc. 15 cm and nexc. 20 cm long complete all as specified and as directed. |
| 16 | M &Lfor Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 17 | M & L for Mild steel TMT bars 6mm to 8 mm dia andcut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 18 | M & L for PCC type B-1, 1:2:4 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed |
