|
| 1 | Surface excavation not exc 30 cm deepandaveraging 15cm and getting in any type of soil complete all as specified and directed. |
| 2 | Excavating in trenches, n exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, & n exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in any type of soil, complete all as specified and directed. |
| 3 | Returning, filling incl spreading leveling watering and well ramming in layers not exceeding 25mm in any type of soil complete all as specified and directed. |
| 4 | Removing excavated material (soils) not exceeding 50 m depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. |
| 5 | Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 6 | Taking down chowkats or frames with shutters(without taking offshutters from frames) areanot exceeding 1.50 Square Metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt ), complete all as specified and directed by Engineer-in-Charge. |
| 7 | Taking down chowkats or frameswith shutters(without taking offshutters from frames) area exceeding 1.50 square metre andnot exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed by Engineer-in Charge. |
| 8 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 9 | Dismantling wall /ceilingboard ( fibre, pulp,insulation etc ) or insulation board / slab/ blankets any thickness including frame and cover fillets complete all as specified and as directed. |
| 10 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specifed and directed. |
| 11 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 12 | Dismantling water tanks capacity exc 500 ltrs & n\"exc 1000 ltrs capacity complete all as specified and directed. |
| 13 | Dismantling cast iron pipe/PVC& reinforced concrete drain pipes, jointed in cement mortar of any dia taking out from trenches or fixed to wallupto 100mm complete all as specified and directed. |
| 14 | Demolition of cement concrete(unreinforced) in ground floor and in pavingexceeding 15 cm thickness (below or aboveground level) complete all as specified and directed. |
| 15 | Demolition of cement concrete(reinforced) as in roof, floors (other than ground floor), beams, staircase, landing, chajjas and similar suspended work, complete all as specified and directed. |
| 16 | Demolition and breaking up 150mm dia SGSW/ AC or reinforced coneretepipes set in cement mortar and taking out of trenches complete all as specified and directed. |
| 17 | Demolition of cement concrete(reinforced) of any description and in any position not other wise specifically provided complete all as specified and directed. |
| 18 | Demolition of brick/stone masonry built in CM. complete all as specified and directed. |
| 19 | M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor for sub basecomplete all as specified and directed. |
| 20 | M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternatebays (n exc 2 Sqm each )and finished even and smooth without using extra cementcomplete all as specified and directed. |
| 21 | M&L for 75mm thick Plain cement concrete type B-2, 1:2:4 (40mm graded stone aggregate) finishing cement concrete surface even and smooth by using extra cement etc complete all as specified and directed. |
| 22 | M&L for providing cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified and directed. |
| 23 | M&L for cement concrete 1:3:6 type C1 (20mm graded aggregate) as in surface channels and drains including necessary formwork etc all as specified and directed. |
| 24 | M/L for PCC 1:5:10 TYPE E-2 as in Sunken floor /foundation filling and mass Conc complete all as specified and directed. |
| 25 | M & Lfor cement concrete 1: 4 :8 type D 2 using 40 mm graded stone aggregate as in foundation filling and mass concrete etc complete all as specified and directed. |
| 26 | M & L (1:1.5:3) type A1 (nominal mix using 20 mm grade stone aggregate as in Beams,cantilevers, bressummers, lintel over 1.5 span etc complete all as specified and directed. |
| 27 | M&L 25 mm thick Sand filling under floors or in foundations including watering and consolidation for laying of interlocking tiles complete all as specified and directed |
| 28 | M&L Providing cement concrete in steps, seismic and other similar bands, parapets and railings up to 60 cm in hieght, coping, kneeless apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles all as directed, 1:2:4 mix type B-0 complete all as specified and directed. |
| 29 | M&L Providing Cement concrete1 : 2 : 4 Type B1 (20mm graded aggregate) as inroof kerbs or mud stops,in lintels upto 1.5 m span, copings slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed. |
| 30 | S& F coloured machine vibro mechenically floated glossy finish interlocking cement paver block,any shape and size confirming to IS 15658-2006 of 60mm thickness,M-35 Grade with,topping of cement mixed with imported pigment,colour and shape shall be approved by engr-in-charge. |
| 31 | M&L for glazed coloured ceramic tiles in dado/vertical surface (450mm x300mm x 10 mm thick set and jointed in neat cement slurry and pointed in colouredcement to match the surface including 10 mm thick rendering as backing coat to receive the tiles on fair faces of brick /concrete surfacesin cement mortar 1:3 and finishedeven and rough complete all as specified and directed. |
| 32 | M&L Non - Skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) size 300x300x10mm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thich screed bed or bedding layer in cement mortar (1:4) etc complete all as specified and directed. |
| 33 | S&F vitrified dark shade tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36Sqm,as in floor etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 15mm thich screed bed or bedding layer in cement mortar (1:4) etc complete all as specified and directed. |
| 34 | All as per item No 34 above but on vertical surfaces as in skirting including 10 mm thick rendering as backing coat to receive the tiles on fair faces of brick /concrete surfacesin cement mortar 1:3 and finishedeven and rough complete all as specified and directed. |
| 35 | M&L for Machine cut kota stone slab flooring 18-20mm thick over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 20mm thich screed bed or bedding layer in cement mortar (1:4), rubbing and polishing etc. complete all as specified and as directed. |
| 36 | M&L for machine cut kota stone joint free 18-20 mm thick in riser/tread of steps, skirting, dado and pillar laid over cement screed andjointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and as directed. |
| 37 | M&L Granite ( of any type ) work 20mm thick (table rubbed and polished) in steps,jambs,pillars,window cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade.(shade and type as approved by Engr -in -charge) |
| 38 | S&F Moulding of kota / granitefull round complete all as specified and directed. |
| 39 | M&L for Rendering 15mm thick (in two layer 10+5)on brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement including mixing integral water proofing compound in the proportion as mentioned in manufacturer\"s instructions complete all as specified and directed. |
| 40 | M&L for Rendering 10mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement all as specified and directed. |
| 41 | M&L for Rendering 5mm thick on brick or concrete surface as in ceiling in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed. |
| 42 | Supply only integral water proofing compound complete all as specified and directed. |
| 43 | M&L for preparation new surfaces plastered or unplastered and applyingthree coats of white wash on ceiling complete all as specified and directed. |
| 44 | M&L for preparation Old surfaces including complete Removal of existing surface of white wash and applyingtwo coats of white wash on ceiling all as specified and directed. |
| 45 | M&L two coat of Oil bound distemper including a coat of primer over a layer of birla wgite putty including preparation of newly plastered surfaces of wall complete all as specified and directed. |
| 46 | M&L for preparation Old surfaces including complete Removal of existing surfaceand applyingtwo coats ofOil Bond distemperover a layer of brila white putty onwalls all as specified and directed. |
| 47 | M&L for applying three coat of white wash on newly plaster surface of wall over incl preparation of surfaces complete all as specified and directed. |
| 48 | M&L for preparation Old surfaces including complete Removal of existing surface of white wash and applyingtwo coats of white wash on wall all as specified and directed. |
| 49 | M&L for preparing plastered new and undecorated surface of walls, applying chalk whiting on plastered surface preparatory to distempering and distempering walls with two coats of cement base paint white or tintedcomplete all as specified and directed |
| 50 | M & L for preparation of old plastered surfaces of wall and distempering with one coat of cement base paint white or tinted complete all as specified and directed. |
| 51 | M&L for roughening surfaces of old concrete surfaces by picking, sweeping cleaning and washing down with water to remove dust etc including taking down tarfelt and 15 mm thick screeding in cement mortar 1:4 finished even and smooth without using extra cement mixed with water proofing compound as per manufacturer instructions (WPC shall be measured and paid separately) |
| 52 | Material and labour for3mm thick APP based polymeric membrane minimum weighing 3 kg/sqm non-woven polyester reinforcement polymeric water proofing membrane (wt not less than 150 gms/sqm) laid on primed surfaces bygas flame torch application and apply one coat of industrial bitumen 85/25 grade at the rate of 1.20 Kg/Sqm over APP Memberence complete all as specified and as directed by the Engineer-in-Charge.Note :- Water proofing treatment will be done by IWL or through a specialized agency which will further have to give a five years warranty for rectification of any defect if incurred at a later stage, otherwise no payment shall be made to the contractor if water proofing treatment is executed by engaging local labour. |
| 53 | S&F AC designer composite ceiling board 4 to 6mm thick in 600x600mm panel confirming to IS-14682 TYPE-B category-3 including GI frame, holdfast and suspenders complete all as specified and as directed by Engr-in-charge |
| 54 | S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.60mm thick crimpted/tapard at the external end slop of any colour having tansile strength 550 Mpa as in roof covering fixed with self tapping screwsand caps etc complete all as specified and directed. |
| 55 | S & F plain galvalume aluminium zinc coating GI based plain steel sheet 0.63mm thick in ridges, hips, valley gutters at the external end slop of any colour having tansile strength 550 Mpa as in roof(ridges) covering fixed with self tapping screwsand caps etc complete all as specified and directed. |
| 56 | M&L for roof trusses (framed), trussed, purlins,crane gantries, rails and fastening and heavy bracket framing (beam, tee,angle,channel or flat section) including distance pieces. |
| 57 | S&F solid PVC moulded door frame of size 50mm x 47mm made out of 5mm both side Prelam PVC sheet used instead of plain colour PVC Sheetand edge will be painted to match with prelam sheet. reinforced with M.S. Square tube, in opening as per specifiecation and drawings complete all as specified and as directed. |
| 58 | S&F factory made solid panel PVC moulded door shutter 28 to30mm thick style ,with 2,4 or 6 raised panel design with 2mm thick Moulded prelam PVC sheet on the front face & 2mm Prelam PVC sheet on back faceall as specified and as directed. |
| 59 | M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc.complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed. |
| 60 | M&L for Flush shutters 30 mm thick , solid core construction, with block board core and plywood face panels, commercial type on both sides and both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed. |
| 61 | S&F factory made, 2nd class hard wood 35 mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc(without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauze etc complete all as specified and directed. |
| 62 | S&F galvanised Mildsteel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 63 | S&F steel window (box type) factory made with side hung glazed shutters including pintolhinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all specified. including one shop coat of red oxide primer complete all specified.Note : (i)The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3(ii) MS fillets, glazing, wire gauge shall be measured and paid separately. |
| 64 | Description all as per Srl Item No.46 here in before but without glazing bar complete all as specified.Note :i)The window shall be fabricated as perDrg No CEUZ/TD/1269/2008Sheet 1/3 to 3/3ii) MS fillets, glazing, wire gauge shall be measured and paid separately. |
| 65 | S&F Factory made mild steel ventilators box type with upper top hung shutters and bottom fixed type shutters including pintol hinges,steel peg stay and one shop coat of red oxide primer complete all specified.Note :i)The window shall be fabricated as per Drg No CEUZ/TD/1302/2009 Sheet 1/3 to 3/3ii), Glazing, wire gauge shall be measured and paid for separately. |
| 66 | Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks,etc and similar work conforming to Fe 290 Gd E-165 complete all as specified and directed. |
| 67 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 68 | S&F welded steel wire fabric mesh weight n.exc 4 Kgs per sqm fixed to steel members complete all as specified and directed. |
| 69 | M&L for rolled mild steel work of angle ironas in frames of doors & Cup Board etcconforming to grade Fe 410-O or Fe-310-Ocomplete all as specified and directed. |
| 70 | Cutting holes exceeding 150 sq.cm but nexc 400 sq.cm in to brick walls built in CM and making good in cement concrete 1:2:4 type B1 for fixingof cooler Brackets etc all as specified and as directed |
| 71 | M&L for preparation of woodensurfacesexceeding 10 cms width or girth and applying two coats of synthetic enamel paintoveronecoat of pinkprimer complete all as specified. |
| 72 | M&L for preparation of new steeland iron surfacesexceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of zink chrome primer complete all as specified and directed. |
| 73 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed. |
| 74 | S&F 4 mm thick figured glass (frosted) ,pin head type and glazing with oil puttynot exc 0.50 Sqm in each panefixing to window/ventilator complete all as specified and as directed. |
| 75 | S&F 250 mm Stainless steel alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed. (ISI Mark) |
| 76 | S&F 150 mm Stainless steel anodised, barrel tower bolts of extruded section complete all as specified and directed.(ISI Mark) |
| 77 | S&F 150 mm aluminium handles, cast type anodised complete all as specified and directed.(ISI Mark) |
| 78 | S&F 100 mm Stainless steel handles, cast ype anodised complete all as specified and directed. (ISI Mark) |
| 79 | S&F Stainless steel l cold rolled butt hinges mediumweight 100 mm long complete all as specified and directed. |
| 80 | S&F Stainless steelcold rolled butt hinges mediumweight 75 mm long complete all as specified and directed. |
| 81 | M&L 18/19mm thick Block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on Both Faces complete all as specified and as directed. |
| 82 | Hasp and staple size 100 mm powder coated with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 83 | Ball catches with 8mm dia steel balls and brass body and striking plate including letting in and fixed complete all as specified and as directed. |
| 84 | S & FFloor door stopper 150mm length of aluminium alloy body and tougue, anodised with hardb steel spring fixed at bottom rail of doorcomplete all as specified and directed. |
| 85 | S&F harrison curtain rails, mild steel, chromium platedwith fixing brackets, stop,Finial, rollers etc. complete all as specified and directed. |
| 86 | S&F in repair 250 mm mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed. |
| 87 | M&L water proofing treatment to the sunken portion with the removing existing treatment,Demolition including wire brushing and clearing the dust and foreign material etc complete, applying two coat of two component( 1part Polymer andsecondpart cementitions powder) cementitions, polymer modified elastomeric, water proofing coating composed of cement, properly selected and graded aggregates, additive and acrylic emulsion polymer as a binder apply first coat of (mix and application as per manufacturer instruction) all over floor surface / prepared surface and apply to vertical surface up to 15 cmfrom tilling level, allow to dry 4 to 6 hours.Prepare for apply 2nd coatperpendicularto first coat and allow to dry 4 to 6 hours.All joints of /Trap/WC/Soil pipe shall be Properlysealed with ceiling compound / polymer modified mortar using Dr Fixit Pidicrete URPor equivalent,Slope of slab shall be towards the Spout of GI pipe 50 mm dia . Provide 15 mm protective screed with cement- sand in 1.3 with WPC ( make:Dr Fixit LW+ or equivalent)within 2 to 3 days of second coat. Complete all as specified as per manufacture instructions/ as per direction of Engineer-in–charge. |
| 88 | Useand wasteformworkto sidesand soffits of floor or roof beams, beam hunching, girders, lintels, cantlievers, shelves including supports, etc for rough finished flat surfacesof concreteall as specified anddirected. |
| 89 | Material and labour for 10 mm dia and over TMT bars, cut to length bend to shape as required including cranking, hooking etc and binding with and includingmild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 90 | Material and labour for 6mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length bend to shape as required including cranking, hooking etc and binding with and includingmild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 91 | M&L brick work with sub class B bricks straight or curved on plan to any radiusbuilt in CM 1:6 complete all as specified and directed. |
| 92 | M&L brick work with sub class B bricks straight or curved on plan to any radiusbuilt in CM 1:6 but except bricks all as specified. |
| 93 | M&Lhalf brick work with sub class B bricks straight or curved on plan to any radiusbuilt in CM 1:4all as specified and directed. |
| 94 | M&L Hardcore of gauge not exc. 63 mm, Broken stone or boulders deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed |
| 95 | M&L Providing cement concrete in steps, seismic and other similar bands, parapets and railings up to 60 cm in hieght, coping, kneeless apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles all as directed, 1:2:4 mix type B-0 complete all as specified and directed. |
| 96 | M&L Providing Cement concrete1 : 2 : 4 Type B1 (20mm graded aggregate) as inroof kerbs or mud stops,in lintels upto 1.5 m span, copings slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed. |
| 97 | Supply and fix in repairs vitreous china wash hand basin white flat back size 550x400mm excluding taps waste chain and plug and porcelain stopper but including brackets waste fitting brass chromium plated 32mm dia with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed etc complete all as specified and as directed by Engr-in-charge. |
| 98 | S&F vitreous china urinal, halfstall type white (excluding flushing cistern, flush pipe )but including PVC waste pipe , providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement andfixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern trap and waste pipe) fixed in repair complete all as specified and directed. |
| 99 | S&F 10 ltr capacity PVC valveless, syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connetion to pipe but fixed in repair complete all as specified and directed. |
| 100 | S&F in repairs600mmx450mm beveled edge mirror of selected quality glass, mounted on 6mm thickcommercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 101 | S&F in repair water closet white vitreous china ware Orissa pattern of size 580x440mm with integral foot rest ‘P’ or ‘S’ trap 100mm dia front or back inlet incl provision of PCC bedding type B1, 1:2:4 ( 20 mm graded aggregate) and connection pipes ( excluding flushing cistern but including flushing pipe 32 mm dia MS chromium plated) (rate also include for taking off unhygienic of WC). Make : Jaquar Cat part No KUS-WHT-35851S300UF or equivalent in Hindware/Cera/Parryware |
| 102 | S&F in repairs flush pipe of polyethylene of low or high density, 32 mm dia for low level cistern including taking down old pipe, complete all as specified and directed. |
| 103 | S&F aluminiumtubular towel rail, 20mm dia, D type, 60cm long between flanges aluminium anodized, fixed with rawl plugs. complete all as specified in repairs. (ISI Mark) Make : Jaquar Cat Part No ACN-1111NM and equivalent in CERA/Parryware. |
| 104 | S & F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer hoistedwith white colour and fixed in position all as specified in SSR Part I make Sintex, Rotex |
| 105 | S&F in repair 15 mm bore bib taps, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make : Jaquar Cat Part No CON 107KN and equivalent in CERA/Parryware. |
| 106 | S&F fancy type chromium plated stop valve cast copper alloy, screwed down, high pressure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions chromium plated of size 15 mm with long shank and cup (concealed type). |
| 107 | S&F SS grating 100mm dia fixed to floor trap in repair complete all as specified and directed. |
| 108 | S& F anglevalves of 15 mm bore but fency type, chromium plated screwed down high pressure with crutch or butterfly handle screwed both and for iron pipe or for unions including necesssary fitting as required at site complete all as specified and directed. Make - Jaquar Cat No KUP-35053PM or equivalent in Hindware/Cera/Parryware |
| 109 | S&F in repairs 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 110 | S&F in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 111 | S&F in repairs 20mm bore brass valve high pressure with polyethene float and fly nuts complete screwed for iron pipe or brass ferrule. |
| 112 | S&F CPconcealed stop cock of cast copper alloy(ISI Marked ) chromium plated fancy type scrwed down high pressure with capstain head screwed both end for iron pipe 15mm bore incl add if fixed in repairs for iron pipe complete all as specified and directed. |
| 113 | S&F in repairs CP Soap dish as specified and directed. Make : Jaquar Cat Part No ACN 1131N and equivalent in CERA/Parryware. |
| 114 | S&F in repair PVC waste Pipe 32/40mm dia and fixed complete all as specified and directed |
| 115 | S&F in repairs for Shower roses 15 mmchromium plated with or without swivel joints, any size, including 125 mm long arm and fixing to steel pipe or union, complete all as specified and directed. |
| 116 | S&Fin repair PVC connection 15mm bore with ptmt nuts of length 600mm complete all as specified and directed. |
| 117 | Taking up or down 15 mm bore steel tubing with connections for cleaning for refixing or removing to store yard complete all as specified and directed. |
| 118 | Taking up or down 20 mm bore steel tubing with connections for cleaning for refixing or removing to store yard complete all as specified and directed. |
| 119 | M & L galvanised 15 mm dia steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified and directed. |
| 120 | M & L galvanised 20 mm dia steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified and directed. |
| 121 | S&F PVC 110mm diapipes minimum pressure rating 6 kg per sqcm single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 122 | S&F PVC 75mm diapipes minimum pressure rating 6 kg per sqcm single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 123 | S&F PVC 110mm diapipes minimum pressure rating 6 kg per sqcm single socketed, in any length with rubber ring joints Fixed to wall complete all as specified and directed. |
| 124 | S&F PVC 75mm diapipes minimum pressure rating 6 kg per sqcm single socketed, in any length with rubber ring joints Fixed to wall complete all as specified and directed. |
| 125 | S&F Salt glazed stone ware gully traps square or round mouthed, type P of size 150x150mm set and jointed to drain pipe with cement mortar (1:1) including demolition of old unserviceable gully traps complete all as specified and directed. (ISI Marks). |
| 126 | S&F PVC bends minimum pressure rating 6 kg per sqcm any radius, rubber ring jointscomplete all as specified and as directed. |
| 127 | M&L for 75 mm dia PVC floor trap minimum pressure rating 6 kg per sqcm minimum pressure rating 6 kg per sqcm plainwith grating including jointing with solventcement complete all as specified and directed. |
| 128 | S&F for 110mm PVCJunction double, minimum pressure rating 6 kg per sqcm (Double T) equal or unequal complete all as specified and directed. |
| 129 | S&F for 75mm PVCJunction double, minimum pressure rating 6 kg per sqcm(Double T) equal or unequal complete all as specified and directed. |
| 130 | S&F 75 mm PVC vent cowls minimum pressure rating 6 kg per sqcm complete all as specified and as directed. |
| 131 | S&F PVC Reducer 100mm minimum pressure rating 6 kg per sqcm for connecting and fixing gas pipe on wallsas in repairs complete all as specified and as directed. |
| 132 | Taking down eaves gutters and and rain water pipes (any size or pattern ), including all fittings incl removal of store and sold to contractor through credit complete all as specified and directed. |
| 133 | S& F 110 mm bore PVCbends minimum pressure rating 6 kg per sqcmand fixed with joint sealent etc complete all specified and as directed |
| 134 | S&F 110mm PVCpipes single/Double socketed of anylength with rubber ring joints pressure rating 6 kg/cm2 fixed to wall incl clamp etc complete all as specifiedand as directed. |
| 135 | S&F stack clamps out of 50mm by 5mm flat iron and 6mm dia round iron stays,including bolts and nuts and securing ends of stays to wall or roof100mm bore of pipe complete all as specified and as directed. |
| 136 | S&F for 150 mm bore Salt-glazed stoneware drain pipes laid in trenches and jointed complete all as specified and directed. |
| 137 | M&L concrete bed to drain pipeincl packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) for 150mm bore pipe complete all as specified and directed. |
| 138 | Providing Precast cement concrete 1:2:4 type B-1 (20mm graded aggregate ) as in manholes cover slab etc all as specified and directed by Engr-in-charge. |
| 139 | Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power) complete includingfitting such as switch, sockets, ceiling rose, pendants socket,fan regulators any type, rectangular board ,light fittings,terminal boxes etc removing materialsfor taking credit and making good disturbed surfaces of walls floors and ceiling complete all as directed. |
| 140 | Point wiring for one light/ fan/bell point controlled by oneswitch using 1.5 Sq mm FRLSH copper conductor cables (multistranded) PVC insulated and unsheathed in and including PVC concealed conduit pipe as per site requirement (size not less than20mm dia), medium grade with Modular sunken boxes & PVC/metal back plate for mounting modular type switches, sockets & regulators etc with cover plate modular type including supplying and laying PVC insulated and stranded unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire connected to earth dolly includingcutting of chases in wall /ceiling etc and making good the disturbed surfaces match to existing with cement mortar and putty white /colour wash complete all as directed . Make: Havells/ Finolex/ Polycab. |
| 141 | All as per srl item No 142 but for 3 pin 6 Amps socket outlet independent boardincluding PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly. Make: Havells/ Finolex/ Polycab. |
| 142 | All as per srl item No 142 but for 3 pin 6 Amps socket outlet on the same board including PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly.Make: Havells/ Finolex/ Polycab. |
| 143 | All as per Srl item No 142 but for 3 Pin 16 Amps socket outlet independent board with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire standard and connected to earth dolly.Make: Havells/ Finolex/ Polycab. |
| 144 | S&F for modular switch6 Amps single pole one way230 V, 50 Hz, AC , with outer strip complete all as specified and directed by Engr In charge. Make:Legrand/Havell crabtree/L &T/ Schneider |
| 145 | S&F for modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with outer strip complete all as specified and directed by Engr In charge. Make:Legrand/Havell crabtree/L &T/ Schneider |
| 146 | S&F for modular socket 3 Pin 6 Amps flush type 230 V, 50 Hz, AC , with outer/inner covercomplete all as specified and directed by Engr In charge. Make:Legrand/Havell crabtree/L &T/ Schneider |
| 147 | S&F for modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush typewith outer/inner covercomplete all as specified and directed by Engr In charge.Make:Legrand/Havell crabtree/L &T/ Schneider |
| 148 | M &L Ceiling rose, surface bakelite 65x 50mm two to three terminals fixed on PVC Round Blockcomplete all as specified and directed by Engr In charge. |
| 149 | S&F Sheet metal enclosure double door type for MCB TPNDB upto 125 Amps, 4 wayvertical type 415 volts with 400 Amps rated busbar and neutral link , fixing DB and making good distributed surfaces to match with existing specification complete all as specified and directed.Make: L&T/ C&S/CG/ Schenider/ Legrand. |
| 150 | S & FMCB Three Pole & Neutral capacity of 40 to100 amps 415 volts rupturing capacity 16 KA complete all as specified and directed.Make: L&T/ C&S/CG/ Schenider/ Legrand. |
| 151 | S&F Sheet metal enclosure double door type for DBs 12 way 240 volts with 200 Amps rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.Make: L&T/ C&S/CG/ Schenider/ Legrand. |
| 152 | S&F Sheet metal enclosure double door type for DBs 04 way 240 volts with 200 Amps rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.Make: L&T/ C&S/CG/ Schenider/ Legrand. |
| 153 | S & F MCBsingle pole 240 volt any rating from 06 to 32 amps \"C\" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cableMake: L&T/ C&S/CG/ Schenider/ Legrand. |
| 154 | S & F MCBsingle poleand neutral 240 volt any rating from 63 Amps \"C\"series, with rupturing capacity 10 KA ,inculding providing thimble for out going cableMake: L&T/ C&S/CG/ Schenider/ Legrand. |
| 155 | S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 06 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 06 Sq mm as earth lead (2x6.00 sq. mm + 1x6.00 sq. mm earth wire ) complete all as specified and as directed (for VTPN DB to SPN DB) Make: Havells/ Finolex/ Polycab. |
| 156 | Earthing complete with galvanized steel earth plate electrodes 600 mmx600 mm x6 mm thick buried directly in ground earth plate not less than 2.25 m deep below normal ground level with top edge of the plate not less than 1.5 m below normal ground level connected to and including galvanized steel earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel including PCC pit in PCC 1:2:4 type B-1using 20 mm graded crushed stone aggregate, RCC framewith 40mm thick RCC cover reinforced with 8mm dia deformed barshandle. including excavation and earth work in any type of soil medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade GI protection pipe 15mm bore main board complete all as shown in electrical plate No 5connected to main control board all as specified and testingon completion. Note: Excavation earthwork charcoal PCC pit is covered under this item including taking out existing earth plate etc. |
| 157 | S&F Modular electronic step type fan regulator 100 watt 230 volts 50Hz two module C/S deluxe type complete all as specified and directed.Make:Legrand/Havell crabtree/L &T/ Schneider |
| 158 | Supply & fix ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep.Min air delivery 210 CFM with service value6.00 BEE. Five star rated with burshless direct current motor (BLDC) all as specified & directed by Engr-in-charge.Make : Bajaj/Khaitan/Atomberg/Orient |
| 159 | Supply & fix exhaust fan,steel bodyAC single phase 230/240 volts heavy duty of size 300mm sweep with blades, frame, louvers and all fixing arrangements as all as specified & directed by Engr-in-charge.Make : Bajaj/Khaitan/Atomberg/Orient/Havells |
| 160 | S&F electric water heater, storage type with steel inner tank and heating element upto 2 KW capacity25 Ltr, BEE 5 star rated complete with all accessories such as safety valve, thermostate ,NRV, connection piece etccomplete all as specified and directed by Engr-in-ChargeMake: Bajaj/Havells/Crompton/A O Smith |
| 161 | S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitablesize.MAKE : Philips/Syska/Havells/Bajaj |
| 162 | Supply and fixing LED lights fitting 1x 20W, 230V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.MAKE : Philips/Syska/Havells/Bajaj |
| 163 | Supply and fixingin repairs GI tubing light grade 40 mm dia along the wall/ in trenches/ in duct / in culvert /road crossing and includingprovisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holdining of GI pipe alongwith poles all as specified and directed. |
| 164 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size completeMAKE : Philips/Syska/Havells/Bajaj |
