Tender For Construction Of Type C Echs Polyclinic Bldg At Raiwala; 1 Sch ‘A Part-I (BUILDING WORK) :-Construction of block of Type C ECHS Polyclinic (Single Storyed) complete all as shown on drawings and as specified. Note :- Lumpsum price worked out by the contractor for BUILDING WORK” as above inSch ‘A Part I representing above/ below the lump sum price ofRs 4835000.00 as inserted by MES for Sch ‘A’ Part I. 2 Lumpsum price worked out by the contractor for“INTERNAL ELECTRIFICATION ” as listed in Sch ‘A Part II representing above / below the lump sum price of Rs 58,075.38 as inserted by MES for Sch ‘A’ Part II on Sl Page No.35 3 SCHEDULE A PART II A (INTERNAL ELECTRIFICATION)M&L for Point Wiring for one light Point/one fan point/ one call bell point, controlled by one switch with 1100 volts grade single core conforming to (IS:694 /1990) PVC insulated unsheathed 1.5 sqmm multi stranded copper conductor cable (FRLSH) with contineous earth wire of 1.5 Sqmm stranded copper conductor cable (FRLSH) PVC insulated unsheathed , drawn in and including concealedPVC conduit ,duly concealed to wall/floor or above false ceiling with fittings(ISI marked) not less than 20 mm dia(Color coding of wires shall be Phase, neutral and earth wire all as specified ) sunk Metal flush box with and incl decorative polycarbonate frame for housing Modular Switches, sockets , fan regulators etc including white cover cover plate complete all as specified and directed. Note:- (i) Cost of cutting chases of suitable girth where required on brick /concrete surface and making good disturbed surface shall be deemed to be included in quoted rates(ii)If the contractor fail to make good the disturbed surface of wall/floor etc and do not match with the existing surface of wall/floor to the entire satisfaction of Engr-in-Charge a recovery @ of Rs. 50/- per RM will be made from payment due to the Contractor. In case of any dispute the decision of accepting officer will be final and binding. 4 Description same all as per Item No. 3 above but for one 3pin/5pin 5/6 Amps socket out let onindependent board with other switches, with cables 1.5 sq mm sizecomplete all as specified and directed. 5 Description same all as per Item No. 3 above but for power point with 2.5 Sqmm PVC insulated FRLSH cable for 15 Amps power pointcomplete all as specified and directed . 6 S&F Study lamp suitable for LED bulb 9 watt, B22 240 Voltscomplete all as specified and directed. 7 S&F Vertical type TPN DB, 4 way, as per IS 8623, IP - 43 protection, universal mounting with 200A Copper bus bar with neutral bar, earth bar and cable ties for cable management, top and bottom removable gland plate suitable for MCCB 100 Amps as incomer and SP MCBs 12 Nos & making necessary electrical connection for incoming and outgoing cables, with copper lugs complete all as specified and directed. 8 S&F Vertical type SPN DB, 12 way, as per IS 8623, IP - 43 protection, universal mounting with 200A Copper bus bar with neutral bar, earth bar and cable ties for cable management, top and bottom removable gland plate suitable for MCCB 100 Amps as incomer and SP MCBs 12 Nos & making necessary electrical connection for incoming and outgoing cables, with copper lugs complete all as specified and directed. 9 S&FMCBTPN/FP 63 Amp to 100 Amp 415 volts,AC C series 10 KA rupturing with required wiring connection and lugs etc and errecting in provided enclouser/distribution board.MCB shall be of current limiting type ,ISI marked, confirm to IS 8828-1996 complete all as specified and directed. 10 S&FMCB SP 6 to 25 Amp B series 10 KA rupturingcapacity complete all as specified and directed. 11 S&F MCBSPN, B series, 10-32 Amp 240 V AC 10 KA rupturing capacity complete all as specified and directed. 12 S&F sub main wiring two single core 4 sqmm PVC insulated unsheathed multi stranded copper conductor cable ( FRLSH ) 1100Volts grade drawn in & including rigid PVC conduit 20mm dia or more medium grade surface/ concealed in wall as per existing along with 4.00 Sq mm PVC insulated unsheathed copper conductor cable (FRLSH ) as earth wire and wire connected withmain earth dolly including cutting chasing and making good disturbed portionall as specified and as directedNote:- Two runs of multi stranded copper conductor cableand one run of earth wire including PVC conduit will be measured as a one length/ unit. 13 S&F sub main wiring two single core 10 sqmm PVC insulated unsheathed multi stranded copper conductor cable ( FRLSH ) 1100Volts grade drawn in & including rigid PVC conduit 20mm dia or more medium grade surface/ concealed in wall as per existing along with 4.00 Sq mm PVC insulated unsheathed copper conductor cable (FRLSH ) as earth wire and wire connected withmain earth dolly including cutting chasing and making good disturbed portionall as specified and as directedNote:- Two runs of multi stranded copper conductor cableand one run of earth wire including PVC conduit will be measured as a one length/ unit. 14 S&F surface mounted LED luminiare, 20 watt 4 feet with all accessories having polymer extruded channel with diffuser for glare free light, high lumen output, driver PF >0.98 having over voltage protection upto 400 volts surge protection, level 7-10 KV thermal short circuit protection THD<10%, made up of long life LED chips (SMD) in modular with Ra>70 and lumen efficiency >120 lumen per watt, internally pre-wired through flexible wire connecting with ceiling rose complete all as specified and directed. Note: The firm has to give warranty for fitting including driver minimum for 2 years for any defects developed during the period. 15 S&FLED building security light 1X20 W housing made out of pressure die-cast aluminium alloy with toughened glass, IP-66 protection, working on 240 Volts , 50 HZ, consisting of reflective lens wired with appropriate driver PF>0.98 having over voltage protection up to 440 volts, Surge protection level ≥ 10 KV, thermal short circuit protection THD < 10% made up of long life LED chips (SMD) in modular with Ra>70, and LED lumen efficiency >140 lumen per watt, beam angle along the drive way, 120 degree, beam angle across the drive way, 80 degree luminior efficiency > 130 Lumens/watt, power LED should be of more than 01 wattCCT should be between 5700° K- 6500° Kincluding fixed onwall with 02 Nos MS clamp made out of 40X6 mm FI and bracket made out of 32 mm dia light grade GI pipe not less than 0.90 mtr long bend to shape as required including connecting with 1.5 sq mm, 3 core, PVC insulated Copper conductor cable 1100 Volts grade from terminalbox to light fittingscomplete all as specified anddirected.Note : (i)the firm has to give warranty for street light fittings including driver minimum for 03 years for any defects developed during the period. (ii) The contractor shall submit the third party LM 79 report from any NABL approved laboratory. (iii)The fitting should have BIS. 16 M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. ( earth pit not less than 2.25 mtr depth below ground level at any type of strata ) with top edge of the earth plate not less than 1.5mtr below normal ground level connected by 4 mm GI wire as earth lead by means of brass nuts and bolt,thimbles check nuts, washers including concrete chamber of PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish, internal surface of concrete chamber shall be given internal dia 300mm x300mm, 15mm thick plaster in CM 1:4 funnel with wire mesh, RCC pit cover of 320x320x80mm size (1:2:4) Type B1 using 20mm graded stone aggregate rainforced with XPM and charcoal, dust and common salt all as shown in electrical plate No 3 of MES SSR Part-1(2009) and specified including and provision of GI wire upto 7.5 mtrs long with 15 mm dia light grade Gi pipe protection and watering pipe of GI 20 mm bore, medium grade, including all exavation and earth work and connecting the earthing strip to panel, including testing on completion complete all as specified and directed by Engr-in-charge. Note:- (i) RCC pit cover shall be precast of RCC(1:2:4) type B1, 80mm thick rainforced with XPM weighting not less than 4kg/sqm in lieu of CI cover.(ii) Cost of additional GI wire more than 7.5 mtrs will be measured and paid seperately under relevant items. 17 S&F single pole and neutral enclosure AC box having PVC body with inner steel enclosure consisting of two pole and earth plug socket with features osf socket residule current device & with over current protection complete with and including 01 No, MCCB 25 Amp, KA rupturing capacity , 240 Volts,AC complete all as specified and directed. Note - Cost of cutting chases for enclosure concealed in wall of suitable girth where required on brick /concrete surface and making good disturbed surface shall be deemed to be included in quoted rates 18 S&F ceiling fan 1200mm sweep BLDC type with remote 240 volts Ac 50 Hzcomplete all as specified and directed. 19 S&F PVC fresh airfan 240 volts Ac 50 Hz 300 mm sweep PVC body including louvers and cutting as required size and shape complete all as specified and directed. 20 Lumpsum price worked out by the contractor for INTERNAL WATER SUPPLY as listedin Sch ‘A Part III representing above/below the lump sum price of Rs 29412.78 as inserted by MES for Sch ‘A’ Part III on Sl Page No 37 21 SCHEDULE A PART III A (INTERNAL WATER SUPPLY)S&F 1000 ltr rotational moulded polyethylene water storage tank, triple layer white in colour construction, ISI mark (cylindrical vertical with closed top) hoisted and fixed in position with and including20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20 mm - 210 gms/ 25mm-455gms/ 40mm -690 gms) 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings, of following capacity of tank completeall as specified and as directed. 22 S&F urinal spreader of brass CP fixing with 15 mm dia pipe (min wt 60 gms) inc connection pipe to stop valve complete all as specified and directed. 23 Lumpsum price worked out by the contractor for EXTERNAL ELECTRIFICATION as listedin Sch ‘A Part IV representing above/below the lump sum price of Rs 3,86,419.11 as inserted by MES for Sch ‘A’ Part IV on Sl Page No 39 24 SCHEDULE A PART IV A (EXTERNAL ELECTRIFICATION )M&L for earthing complete with galvanised steel earth plate electrode 600mm X 600mm X 6mm thick buried directly in ground vertically earth pit not less than 2.25 meter deep below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to GI earthstrip of size 32x6 mm as earthing lead by means ofbolts, nuts and washers all as shown in electrical plate No 3 of MES Scedule part I (2009)withconected to eath test point including adequate quantity of charcoal dustand comman salt, PCC (1:3:6) type C-1chamber andfor earth pit with 40x40x6mm mild steel angle iron frame for cover. precast RCC cover 40mm thick (1:2:4) type B1 using 20 mm graded stone aggregate reinforced with 8 mm dia round bars both wayswith MS handle 8 mm dia. PGI funnel and wire mesh 20 mm dia GI pipe medium grade for wateringand 40mm dia medium grade GI pipe as earth lead protection pipe completeall as specified and directed.Note: GI earth strip and protection pipe upto and including 7.5m is deemed included in unit rate quoted by contractor. 25 M&L for Design, supply, Fabrication, Installation, testing and Commissioning factory made with minimum size 0.8X0.8X0.45 metre , LT feeder pillar box ,outdoortype IP 65 protection , totally enclosed, dust and vermin proof suitably ventilated, floor mounted, 415 volts, 3 phase and neutral, 50 hz, AC supply system, both side open able, made out of 3 mm thick CRCA sheet steel, having Busbar of capacity-300 Amps 3 Strips and Neutral Strip 300 Amps, Aluminium Conductor with color coded heat shrinkable sleeve and shall be mounted on non hygroscopic , non combustible, track resistant high strength DMC material interconnection of all incomings & outgoings, Red, Yellow Blue Phase indicating lights LED Type 220 V AC-1 Set (Set of Three),protection of enclosure with pre-treatment and powder coated of approved colour including suitable frame work / support made out of suitable size of angle iron / flat iron, front opening type with provision for cable entry, with proper ferrule and cable glands,required civil works/anchoring bolts for fixing, PCC foundation,complete internal wiring as required etc with and including following all as specified and directed.(From Main Panel of MRS to prop feeder pillar) Outgoing: (i)MCCB 200 Amps, 415Volts, 4 pole 50 Hz,35 KA with thermal adjustable and magnetic,release in built instantaneous protection, Ics = 100%=Icu(1 sec) complete all as specified and directed.-01 No. 26 M&L for Design, supply, Fabrication, Installation, testing and Commissioning factory made1.2x0.8x0.45 m, LT Panel Board ,outdoortype IP 65 protection, totally enclosed, dust and vermin proof suitably ventilated, floor mounted, 415 volts, 3 phase and neutral, 50 hz, AC supply system, both side open able, made out of 3.0 mm thick CRCA sheet steel, 3 phase and neutral aluminium bus bar of 200 Amps, protection of enclosure with pre-treatment and powder coated of approved colour including suitable frame work / support made out of suitable size of angle iron / flat iron, front opening type with provision for cable entry, with proper ferrule and cable glands,required civil works/anchoring bolts for fixing, PCC foundation,complete internal wiring etc with and including following all as specified and directed. 27 INCOMER :(i) MCCB 100 Amps, 415Volts, 4 pole 50 Hz,35 KA with thermal adjustable and magnetic,release in built instantaneous protection, Ics = 100%=Icu(1 sec) complete all as specified and directed. 01 No. Outgoing :(i) MCCB 63 Amps, 415Volts, 4 pole 50 Hz,25 KA with thermal adjustable and magnetic,release in built instantaneous protection, Ics = 100%=Icu(1 sec) complete all as specified and directed. 02 No. (ii) MCB SPN 32 A-04 No. (iii)Digital panel meter for amp, volt, KWH, PF and other parameter flushing mounting of size 96 x 96 mm- 01 No(v) LED indication lamps for 3 phase.vi)Drawing of panel board should be got approved from AGE(I) before fabrication vii)Panel board should be compartmentalized in accordance to IEC 61439-1-2. 28 M&L for road cutting for laying cable and through GI Pipe of suitable size making good with PCC 1:3:6 type C-2(using 40 mm graded stone aggregate) of 150mm X 100mm inrespect ofwidth and thickness complete all as specified and directed. Note: GI pipe should be deemed to be included in the quoted rate. 29 M&L for medium grade GI bracket made out of 40 mm diapipe 1.0 mtr long bend to shape as directed fixed to steel tubular pole with two number MS clamp made out of 40x5 mm flat iron duly painted withtwo coats of synthetic enamelled paint over one coat of red oxide Zinc crome primer with and including nuts, bolts etc complete all as specified and directed. 30 Supplying, transporting, erection & fixing of new steel tubular swaged poles type 410 SP-31, (9.00 metres long), with cast iron base plate, finial taper plug, bolts, nuts and screws complete as specified with and including two coats of aluminium paint over a coat of red oxide primer on all exposed surfaces and tarring with black bituminous paintsto portion embeded in PCC with and including all necessary excavation & earth work in any type of soil for foundation of poles, PCC 1:3:6 type C2 (using 40 mm graded stone aggregate ) in foundations of size600 X 600 X 1650 mm belowGL, PCC 1:2:4 type B2 (using 20 mm graded stone aggregate) in plinth block(coping) of size 600 X 600 X 300 mm above GL , removing surplus soil to a distance n. exc. 50 m & depositing where directed, and writing numbers of poles in 100 mm dia yellow colour circle with black paint including 30 cm wide alternate black bands (03 Nos) upto 1.5 height from top of coping complete all as specified and directed. 31 S&F thermoplastic cable junction box/enclosure (distribution box) for outdoor installation having IP -66 with knockout for cable entry suitable for cable size 06-10 sqmm inside diemension 155x210x92 mm with cable terminals and 01 no MCB (6Amp) 10KA aluminium bus bar 100 Amps for phase and neutral 02 Nos 230 volts complete fitted with synthetic enamelled paint over one coat of red oxide Zink chrome primer on clamps and including cable gland, conical DMC insulator etc complete all as specified and directed. 32 S&F LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver impact and corrosion resistant including tharmal management in multiple optics complete with IP-66 protection complete on new LT pole with suitable size of GI bracket with reducerscomplete all as specified and directed. 33 Lumpsum price worked out by the contractor for EXTERNAL WATER SUPPLY as listedin Sch ‘A Part V representing above/below the lump sum price of Rs 86896.12 as inserted by MES for Sch ‘A’ Part V on Sl Page No 40 34 SCHEDULE A PART V A (EXTERNAL WATER SUPPLY)M&L for cutting to cast iron pipe of 100mm bore in position for insertion of new tees, branches ,bend and new connection etc completeall as specifed and as direted 35 M&L for DI fittings, Tee bend,Tail Piece etc completeall as specifed and as direted 36 M&L for construction of valve chamber of size 600x600x600 mm (internal dimensions) built in brick masonary 230 mm thick on 150 mm thick PCC infoundation (1 : 4 : 8) type D-2 using 40 mm graded stone aggregate over 100 mm thick hard core with brick work masonry in cement mortar 1:4 using Bclass bricks and rendering in cement mortar 1: 4, 10 mm thick internally including exposed surfaces of external surfaces, MS cover made out of 3 mm thick MS sheet on angle iron framework made out of 40 x 40 x 3 mm duly embedded in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate with hold fast made out of MS flat iron 25 x 6 mm x 300 mm long and 40 mm thick PCC coping (1:2:4) type B-0 using 12.5 mm graded stone aggregate with handle hinges with locking arrangement& applying two coats of synthetic enamel paint over a coat of red oxide primer to all exposed steel surfaces complete all as specified and directed. 37 Lumpsum price worked out by the contractor for Sewage Disposal as listedin Sch ‘A Part VI representing above/below the lump sum price of Rs 257370.22as inserted by MES for Sch ‘A’ Part VI on Sl Page No 43 38 Lumpsum price worked out by the contractor for Area Drainage as listedin Sch ‘A Part VII representing above/below the lump sum price of Rs 1,58,431.96 as inserted by MES for Sch ‘A’ Part VII on Sl Page No 44 39 Lumpsum price worked out by the contractor for ROAD,PATH CULVERT as listedin Sch ‘A Part VIII representing above/below the lump sum price of Rs 207798.64 as inserted by MES for Sch ‘A’ Part VIII on Sl Page No 46. 40 Lumpsum price worked out by the contractor for SITE CLEARANCE and earth Work as listedin Sch ‘A PartIX representing above/below the lump sum price of Rs 246012.48 as inserted by MES for Sch ‘A’ Part IX on Sl Page No 47.
