|
| 1 | Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed. |
| 2 | Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and not exceeding 1.5m deep Soft / Loose soil complete all as specified and as directed. |
| 3 | Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation of poles,cables etc. n exc 10 sq m on plan and depth exc. 1.5m but n exc 3.0 m in depth and getting out in soft/loose soil etc complete all as specified and as directed. |
| 4 | Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil etc complete all as specified and as directed. |
| 5 | Materials and labour for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in bond stone set in cement mortar 1:6 including necessary formwork complete all as specified and as directed. |
| 6 | Material & labour for providing plain cement concrete 1:2:4, Type C1, using 20mm graded stone aggregate as in window or door Cills, lintels, bressummers, steps, quoin blocks [for use with masonry], string courses, copings. kneelers, apex stones, pier caps, columns, posts,bond stone boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders [for stone walling], corbels, brackets, etc. [of any section indicated], with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar 1:6 complete with joints to matchcomplete all as specified and as directed. |
| 7 | Material and labour for walling of random rubble,uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:4 )complete all as specified and as directed |
| 8 | Material & labourfor Raised Pointing in Cement Mortar 1:4 to random rubble uncoursed or brought up to coursed masonry complete all as specified and directed. |
| 9 | Material & labourfor hand packing (anythickness) with broken stone of 40 to 80 mm gauge at back side ofwall complete all as specified and directed. |
| 10 | Supply and laying 110mm bore PVC [SWR] pipesin single piece without joint as weep hole in retaining wall complete all as specified and as directed. |
| 11 | Material and labour for cement concrete 1:4:8 type D-2 (using 40mm graded aggregate) as in foundations filling and mass concrete complete all as specified and directed. |
| 12 | Material and labour for cement concrete 1:3:6 type C-2 (using 40mm graded aggregate) as in foundations filling and mass concrete complete all as specified and directed. |
| 13 | Material and labour for 15mm thick rendering in CM (1:6) onstone masonary surfaces,finished the surface even and fair without using extra cement complete all as specified and as directed. |
| 14 | Returning, filling in including spreading and levelling watering and well remming in layeres n.exc. 25cm thick complete all as specified and directed. |
| 15 | Removal of excavated material [Soil] to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. |
| 16 | Material and labour for sand filling under floor or foundation including watering and consolidation complete all as specified and directed.(Note: Punned thickness to be measured for payment purpose) |
| 17 | Material and labour broken stone or boulders hardcore of gauge n.exc 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed. |
| 18 | Material & Labour for 75 mm thick, PCC 1:3:6, Type C-2, using 40 mm graded stone aggregate as in sub base complete all as specified and as directed. |
| 19 | Supply and fixing polythene film black 50 micron laid in floor over sand layer complete all as specified and directed. |
| 20 | Material & Labour for 75mm thick, PCC 1:3:6, Type C-1, using 20mm graded aggregate as in Plinth protection etc surface finished even and smooth without using extra cement and providing necessary joints 12mm wide to the full depth of PCC at every 3 meters and every change of directions and the joints duly filled with mastic filling comprising of 01 Part of heated bitumen blown grade any penetration and 3 parts of sand [all by weight] complete all as specified and as directed. |
| 21 | Material & Labour for 100 mm thick, PCC 1:4:8, Type D-2, using 40 mm graded stone aggregate as in sub base complete all as specified and as directed. |
| 22 | Material and labour for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment including 50mm thick sand cushioning complete all as specified and as directed |
| 23 | Material and labour for reinforced cement concrete (design mix) in M-25 (20mm graded aggregates) for foundation and plinth beams etc complete all as specified and as directed.Note:- Note:-(i) Reinforcement and form work required shall be measured and paid seperately(ii) Design mix will be approved by the GE. |
| 24 | Material and labour for Reinforced cement concrete (design mix) in M-25, (20 mm graded aggregate) in columns/pillars complete all as specified and as directed.Note:- (i) Reinforcement and form work required shall be measured and paid seperately(ii) Design mix will be approved by the GE. |
| 25 | Material and labourfor reinforced cement concrete (design mix) in M-25 (20mm graded aggregates) for beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.Note:- (i) Reinforcement and form work required shall be measured and paid seperately(ii) Design mix will be approved by the GE. |
| 26 | Material and labour for RCC M-25 Design Mix, using 20mm graded stone aggregate as in Chajjas and the like complete all as specified and as directed.Note:- (i) Reinforcement and form work required shall be measured and paid seperately(ii) Design mix will be approved by the GE. |
| 27 | Material and labour for RCC M-25 (Design Mix) (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.Note:- (i) Reinforcement and form work required shall be measured and paid seperately(ii) Design mix will be approved by the GE. |
| 28 | Material and labour for providing Precast RCC 1:2:4, Type B-1, using 20mm graded stone aggregate as in Landings, Cover Slabs [for manholes etc], Chullah Hoods, Chajjas, Water Troughs, Mangers, Shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified and as directed. |
| 29 | Material and labour for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter with rough finished surfaces of concrete, flat complete all as specified and as directed. |
| 30 | Material and labour for use and waste of form work to sides of pillars, posts, struts, piers, piers, columns and stanchions of square, rectangular or polygonal shapewith rough finished surfaces of concretecomplete all as specified and as directed. |
| 31 | M & L for use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc with rough finished surfaces of concrete flat complete all as specified and as directed. |
| 32 | Use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges with rough finished surfaces of concrete flat complete all as specified and as directed. |
| 33 | Material and labour forbrick work with sub class `B` bricks, old size,straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed. |
| 34 | Supply and fixing Second Class Hard Wood, plain, solid, straight Chowkats and Frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed. |
| 35 | S & F Factory made, 35mm thick, Second Class Hard Wood, Glazed and Skeleton Shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated Sash Bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part – I, Section 8, Clause 8.24 [a] and fitted to Chowkats complete all as specified and as directed. |
| 36 | Supply and fixing 4 mm thick figured glass pin headed type & glazing with oil putty, glazing pin etc in squares n. exe 0.5 sqm in each pane complete all as specified and as directed. |
| 37 | Material & Labour for joint free non skid ceramic coloured tiles7 to 8mm thick (square /rectangular) of premium quality, area of each tile exceeding .18 sqm but not exc 0.36sqm in floors etc.set & jointed in neat cement slurry & pointed in white or coloured cement to match including screed bed of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE. |
| 38 | Material & Labour for joint free non skid ceramic coloured tiles7 to 8mm thick (square /rectangular) of premium quality, area of each tile exceeding .18 sqm but not exc 0.36sqm on skirting/dado, set & jointed in neat cement slurry & pointed with white/coloured to match over and including rendering of 10mm thick in Cement Mortar 1:3 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE. |
| 39 | Material and labour coloured Glazed ceramic tiles of size 300 X 450 X 7mm thick of premium quality as in skirting/dado, set & jointed in neat cement slurry & pointed with white/coloured to match over and including rendering of 10mm thick in Cement Mortar 1:3 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE. |
| 40 | Supply & Fixing Reinforcement usingTMT steel bars 500D, 10mm dia and over, cut to length,bent to shape required,including cranking bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips qualsecuring with clips all as specified and directed. |
| 41 | Supply & Fixing Reinforcement usingTMT steel bars 500D of 5mm dia and over upto includig 10mm dia in stirrups spacers and binders complete all as specified and directed. |
| 42 | Supply and fixing 100 mm size, medium weight Butt Hinges, cold rolled, mild steel including fixtures complete all as specified and as directed. |
| 43 | Supply and fixing Aluminium anodised barrel tower bolt of extruded section and fixed 150 mm long complete all as specified and as directed. |
| 44 | Supply and fixing aluminium anodized bow handles 150mm long extruded, cast typecomplete all as specified and directed. |
| 45 | Supply and fixing Mild Steel work as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-290, Grade E-165 complete all as specified and directed. |
| 46 | Supply and fixing rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe-410-W (Gde E-250) quality- Bcomplete all as specified andas directed. |
| 47 | Supply and fixing of Framed work such as grills, gratings, etc.. with ends of bars or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe 290 Gde-E-165 complete all as specified and as directed. |
| 48 | Material and labour for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as specified and as directed. |
| 49 | Material and labour for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws ascomplete all as specified and as directed. |
| 50 | Material and labour for suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system) of grid size 600mmx600mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using4 mm thick size 595 x 595 mm HPSC (High pressure Steam Cured) pre-primefered self embossed texture designer board E-board classic in a grid of GI systtem duly suspended with 4 mm dia GI bar hanger fixed with steel dash fasteners or iron purline from the roof with adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts, sprinkler, smoke detectors etc. The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. The last hanger at the end of each main runner should not be interlocked between main runners @ 610mm c/c, as to form 600 mm x 600 mm grid complete all as specified and as directed. |
| 51 | Material and labour for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girthand applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 52 | Material and labour for preparation of new or previously untreated wooden surfaces of any description over 10 cm width or girthand applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 53 | Material and labourfor rendering 10 mm thick in CM 1:6 on fair faces of Brick masonry/Concrete surface finished even and smooth without using extra cement all as specified and directed. |
| 54 | Materials and labour for 15 mm thick rendering on fair faces of brick work mixed with water proofing compound @ 2% by weight of cement content in cement mortar (1:4) on wall andfinished the surfaces even and smooth without using extra cement complete all as specified and as directed.Note: WPC shall be measured and paid seperately. |
| 55 | Supply only integral water proofing compound (WPC) of best quality (ISI marked) completeall as specified and as directed. |
| 56 | M & L for preparation of newly plastered wall surfaces and applying two coats of Cement Based paint over a coat of Alkali Resistant Primer complete all as specified and as directed. |
| 57 | Material and labour for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of primer over 1.5mm thick wall care putty complete all as specified and as directed. |
| 58 | Supply and fixing 4.8 mm thick clear/sun shade glass colour, ordinary quality & glazing with oil putty, glazing pin etc in squares exe 0.5 sqm in each pane complete all as specified and as directed. |
| 59 | Material & Labour for machine cut Kota stone slab flooring using 20 to 25mm thick slabs, laid and jointed with grey cement slurry mixed with a admixture of pigment to match shade of slab including rubbing and polishing to smooth mirror finish all to required sizes, the size and design / pattern of slabs shall be as directed, including diagonals, inlays, borders, margins in two or more shades of slabs including screed bed of mortar 20 mm thick in Cement Mortar 1:3 complete all as specified and as directed. |
| 60 | Material and labour 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screed in cm (1:4) complete all as specified and as directed. Note: The colour / shade / design of granite shall be as approved by AGE(I)/GE. |
| 61 | Supplying and laying GI tubing of 20 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc laid in floors/ fixed on walls including testing complete all as specified and as directed. |
| 62 | Supplying and laying GI tubing of 15 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc laid in floors/ fixed on walls including testing complete all as specified and as directed. |
| 63 | Supply and fixing 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.. |
| 64 | Supply and fixing PVC (SWR) bends any radius, 110mm bore including jointing with solvent cement complete all as specified and as directed. |
| 65 | Supply and fixing 15mm bore stop valve fancy type,chromium plated , screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 66 | Supply and fixing 15 mm dia Bib Taps with wall flange and areater, brass Chromium Plated, Fancy Type and screwed down toiron pipe or brass ferrule complete all as specified and as directed. |
| 67 | Supply & Fixing75mm bore PVC [SWR] Floor Trap with grating including jointing with solvent cement complete all as specified and as directed. |
| 68 | S & F Aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed. |
| 69 | Material and labourfor Providing 40mm thick PCC 1:2:4 type B-0 as in Damp Proof course to horizontal or vertical surfaces including necessary form work including applying evenly a coat of blown type bitumen @ 1.5Kg per sqm and binding with clean dry sand @ .05 cum per sqm including 150 micron thick polythene film laid on a coat of bitumen primer @ 0.3 to 0.5 Kg per sqm complete all as specified and as directed. |
| 70 | Supply and fixing Vitreous China Ware Wash Hand Basin, White, Flat Back of size 550 mm X 400 mm including 32mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible Waste Pipe, PVC Connection of 15mm Bore and 600mm long with PTMT check nut and union etc. complete all as specified and as directed. |
| 71 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.)comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paidseparately).Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. indepth & width of profile shall be acceptable.Variation in profile dimension in higher side shallbe accepted but no extra payment on this accountshall be made. |
| 72 | Providing and fixing factory made uPVC white colourfixed window made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile withhollow section with multi chamber. Frame (60mm x58mm). T profile (Onevertical length in between twoshutters) (60mm x 74mm). Glazing bead (35mm x20mm) will be mitered cut and fusion welded at allcorners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners complete all as specified and as directed.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories Net opening will be measured for payment purpose.)(a) Area exceeding 2.00 sqm each |
| 73 | Material and labour for concealed point wiring with FRLSH stranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated cable 1100 volts grade drawn through PVC conduit including all accessories etc ISI marked in concealed with GI sunken boxes, white inner plate, cover plate with frame suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) single core cable as earth continuity conductorconnecting to common earth dolly for one light point/ fan point/ bell point complete all as specified and as directed. |
| 74 | All as per item No 73 above but for 3 pin 5 Amp socket outlet point controlled by one switch on the same board complete all as specified and as directed. |
| 75 | All as per item No 73 above but for 3 pin 5 Amp socket outlet point controlled by one switch on independent board complete all as specified and as directed. |
| 76 | All as per item No 73 above but with FRLSH stranded copper conductor 2.5 sqmm (nominal area), two single core, PVC insulated and unsheathed cable 1100 Volt grade ISI-694 markedfor 3 pin, 15 Amp socket outlet, independent board, including FRLSH PVC insulated stranded copper conductor 2.5 sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly. |
| 77 | All as per item No 73 above but with FRLSH stranded copper conductor 4.0 sqmm (nominal area), two single core, PVC insulated and unsheathed cable 1100 Volt grade ISI-694 markedfor AC Point, including FRLSH PVC insulated stranded copper conductor 4.0 sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly. |
| 78 | Supply and fixing modular switch, 1 way, 6 A, 1 module complete all as specified and as directed. |
| 79 | Supply and fixing modular switch, 1 way, 16 A, 1 module complete all as specified and as directed. |
| 80 | Supply and fixing modular socket,6 A, 2/3 pin, 2 module complete all as specified and as directed. |
| 81 | Supply and fixing modular socket,6 / 16 A, 2/3 pin combined, 2 module complete all as specified and as directed. |
| 82 | Supply and fix ceiling rose surface Isolated body, 240 V, ISI marked Polycarbonate/ PVC three terminal complete all as specified and as directed. |
| 83 | Supply & Fixing Surface & wall mounted Energy efficient LED Tube Light Fitting of 20 watt, 4 feet long,5700 K of cool white, with extruded aluminium / CRCA housing and robust construction with necessary acrylic diffuser & integrated electronic driver, all accessories internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mmcomplete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 84 | Supply & Fixing Surface & wall mounted Energy efficient LED Tube Light Fitting of 10 watt, 2 feet long,5700 K of cool white, with extruded aluminium / CRCA housing and robust construction with necessary acrylic diffuser & integrated electronic driver, all accessories internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mmcomplete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 85 | Supply and fixing Square recessed mounted Flat Panel LED Light of 36 Watt suitable for fixing in 2\" X 2\" Grid False Ceiling, 6500 K, with high transmitive diffuser for soft-light and glare free symmetrical illumination with all accessories internally prewired and including connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 86 | Supply & Fixing Energy efficient & Long life Building Security Light Luminaire, of 25 watt, 5700 K with Pressure Die Cast Aluminium Housing, IP66 protection, heat resistant glass cover, high power LEDs as light source, electronic driver including GI Bracket made out of 25 mm bore GI Tube, Medium Grade of size not exceeding 1.20 m in length and bent to shape required and fixed including drilling in wall of required hole with 2 Nos of wall fitting Clamps made out of MS Flat of size 50 X 6mm, bolts, nuts, washers and painting with two coats of aluminium paint over a coat of primer red oxide zinc chrome primer and connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 87 | Supply and fixingDecorative LED wall mounting, Champagne gold finish fixture with plastic body of9 W, Base type B-22 LED lamp complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 88 | Supply & Fixing Energy efficient, BEE 5 Star rated Storage type Water Heater [Geyser] 25 Litres Capacity with 2000 Watt Capacity heating element Conforming to IS - 2082,Vertical Storage type with Stainless Steel Inner Tank and ABS Outer Shell complete fixed to wall with suitable expansion fasteners including 02 Nos. of 450 mm long x 15mm dia Stainless Steel braided Flexible Hot & Cold Water connections and 15mm bore Non-Return Valve complete all as specified and as directed. |
| 89 | Supply & Fixing Energy efficient, Low Noise, Ceiling Fan, 1200mm Sweep of any colour as approved, 03 blades, BEE 5 Star Rated, with BLDC Motor, Copper Wound, 350 RPM, with Double Ball Bearing, Conforming to IS - 374, ISI Marked, suitable for operation on Single Phase, 240 Volts, AC, 50Hz, including Down Rod, Canopies, Shackles, Safety Rope, Hanging Clamps, Bushes, having P.F >0.95, Service Value >6.5, Air Delivery >215 CMM, Power Consumption less than 35 Watt, THD less than 5%including provision of Electronic speed control Regulator step type, including connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed. Note: Ceiling Fan shall be provided with 03 Years onsite replacement warranty. Rate quoted is deemed to be including the same and nothing shall be paid extra on this account. |
| 90 | Supply and fixing of MCB DB SPN 8 ways, powder coated, double door, 230 Volts,including bus bar neutral link, earth bar and din rail,for fixing MCB of various rating complete all as specified and as directed. |
| 91 | Supply & Fixing of MCB SP of capacity 6-32 Amps,240 V, 10 KA \"C\" curve complete all as specified and directed. |
| 92 | Supply & Fixing of MCB SPN of capacity 32 Amps,240 V, 10 KA \"C\" curve complete all as specified and as directed. |
| 93 | Supply & Fixing of MCB SPN of capacity 40-63 Amps,240 V, 10 KA \"C\" curve complete all as specified and as directed. |
| 94 | S & FSP & N Enclosure with 2 Pole and Earth Metal Plug & Socket for incorporating SP MCB complete including One MCB, SP, 20 Amps, 240 Volts complete all as specified and as directed. Note for serial Item No. 90 to 94: MCB and MCB DB shall be of same make as approved by GE. |
| 95 | Supply, fixing, commissioning & testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, Electric power cable (heavy duty) with aluminium conductors, 1100 volts, grade cross sectional area 25 sqmm 2.0 corelaid in trenches/fixed to wall/under road/pipe as per IS 7098 (Part I) etc including cable glands, aluminium lugs complete all as specified and as directed.Note:-Excavation and earth work, brick protection, sand cushioning etc will be measured and paid separately |
| 96 | Supply, fixing, commissioning & testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, Electric power cable (heavy duty) with aluminium conductors, 1100 volts, grade cross sectional area 16 sqmm 2.0 corelaid in trenches/fixed to wall/under road/pipe as per IS 7098 (Part I) etc including cable glands, aluminium lugs complete all as specified and as directed.Note:-Excavation and earth work, brick protection, sand cushioning etc will be measured and paid separately |
| 97 | Material and labour for well burnt subclass \"B\" bricks laid flat width wise along the length of cable for cable protection complete all as specified and as directed. |
| 98 | Materials and labour for sand filling around the cable with approved quality coarse sand for sand cushioning of Under ground cableincludingspreading and punning down to desired thickness complete all as specified and as directed.(Note: Punned thickness shall be measured for payment purpose) |
| 99 | Material and labour for cutting the existing hardstanding/PCC/WBM road at a depth not less than 20cm and 45cm wide for passing of GI pipe returning filling in complete including finishing the surfaces by providing cement concrete (1:2:4) type B2 using 40mm grade stone aggregate) upto 20cm depth,finishing to a uniform smooth surface to match the existing surface complete all as specified and directed.Note:-Payment for PCC shall deemed to be included in the quoted rate. |
| 100 | Supply and laying 40 mm bore galvanised GI tubing, light grade with all fittings for passing of UG cables includingcomplete all as specified and as directed. |
| 101 | Supply, install, testing & commissioning of split type air conditioner, wall mounted type, working on single phase, 240 volts, 50 Hz AC supply with cordless remote control unit, built-in air ionizer and plasma filter for better air quality, with latest inverter technology, minimum 5 Star rating and EER 3.2 of capacity 2.0 TR complete with copper condenser coil including fixing of indoor and outdoor unit, necessary copper pipe connections including cutting, bending, brazing, insulation on pipe etc, PVC drain pipe, electric connection between indoor and outdoor unit with suitable size PVC insulated, multi-stranded copper cable complete all as directed.[Note: All connected pipes shall be concealed with casing and capping and the PVC drain pipe shall be taken to ground level. The rate quoted shall include for these provisions] |
| 102 | S & F Electronic wall mounted time delay Voltage stabilizer of 4 KVA Capacity, Automatic Operation, for input variation of 90 Volts to 300 Volts with stabilised voltage of 230 Volts with accuracy of ± 2.5% complete all as specified. |
| 103 | Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised wire of 4mm diaby means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 15mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on earthing set all as specified and as directed.Notes:-(i) Main earthing strip from earth plate electrode to rest point upto length of 7.5 meters length shall deemed to be included in the unit rate quoted against this item. (ii) On testing after completion if the desired resistenance is not obtained the contractor shall redo the earthing without any extra cost to the department. o the department. |
