|
| 1 | M&L non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but n.exc 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes, including dismantling floor, heart or wall tiles including cement mortar bedding complete all as specified and directed. |
| 2 | M&L for 1st or premium quality of glazed ceramic coloured tiles of size 350mmx250mm /450mmx350mm and 7 mm thick as in vertical surface suck as skirting/dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour over and including 10cm thick backing with cement mortar 1:4 backing coats etc. including dismantling floor, hearth or wall tiles including cement mortar bedding complete all as specified and directed by Engr-in-Charge. |
| 3 | Demolition cement concrete (unreinforced )in ground floors and paving not exceeding 15 cm thickness (below or above ground level)complete all as specified and directed. |
| 4 | M&L 75 mm thickPCC 1:2:4, type B-2 (using 40 mm graded stone aggregate) as in sub base to flooring complete all as specified and directed. |
| 5 | M&L cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate) in plinth protection,75 mm thick, complete all as specified and directed. |
| 6 | M&L 75 mm thickPCC 1:4:8, type D2 (using 40 mm graded stone aggregate) as in sub base to flooring complete all as specified and directed. |
| 7 | M&L hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 8 | Taking up or down 15 mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed. |
| 9 | S&F 15mm bore, steel water tubing medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed. |
| 10 | S&F in repair 15mm bore, steel water tubing medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed. |
| 11 | Taking up or down 20 mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed. |
| 12 | S&F 20 mm water tubes, ‘medium grade’ galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 13 | S&Fin repair20mm water tubes, ‘medium grade’ galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 14 | Demolition of cement concrete (reinforced) in ground floors and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed. |
| 15 | M&L for precast RCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in cover slabs and the like including providing necessary form work etc, set in cement mortar 1:6 complete all as specified and directed by the Engineer-in-Charge. Note : Reinforcement to be measured and paid separately. |
| 16 | Mild steel TMT bars 10 mm diaand over as inreinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 17 | M&L for granite (of any type) work (table rubbed and polished) in steps Jambs, pillars, window cills, platform and likes 18-20 mmin cement mortar 1:4 including pointing in white cementmortar 1:2 using marble dust with admixture pigment to match with shade of granite ,complete all as specified and directed . |
| 18 | M&L for special water proofing treatment for sunken portion of WCs/ Bath & toilet executed in following stages:-Stage-1:- Demolition of WC including lime concrete and cement concrete coba etc and preparing the surfaces of existing sunken portion of WCs of STP Ltd in the proportion / quantity all as per manufacture instructions.Stage-2:-Providing 10mm thick plaster in cement mortar 1:3 mixed with integral water proofing chemical Dr Fixit Pidicrete URP or plaster seal of STP Ltd in the proportion/ quantity all as per manufacture instructions.Stage 3:- Apply Dr Fixit Prime seal primer or Equivalent of STP Ltd (and allow to dry for 8 hours) all as per manufacturer\"s instructions.Stage 4:-Apply two coats of water proofing elastomeric coating system of Dr Fixit Raincoats with DFT 100 Micron or shalicry 215 of STP (The surface after painting one coats shall be allowed to dry of 6 hours before next coats) all as per manufacturer\"s instructions.Stage 5:- Rendering 10mm thick in cement mortar 1:3 mixed with integral water proofing chemical Dr Fixit Pidicrete URP or plaster seal of STP Ltd all as per manufacturer\"s instructions.Stage 6:-All CI joints shall filled with mixture of cement fine sand plaster seal of STP Ltd or Dr Fixit Pidicrete URP all as per manufacturer\"s instructions.Stage 7:- Making holes in wall and fixing 600mmm long 20mm dia medium grade GI spout for draining the surplus water if any.Stage 8:-Carry out ponding test for 48 hours to ensure water tightness of repaired sunken portion.Note:- (a) Only plan area shall be measured and accorded for payment under this item.(b) Depth of sunken portion of WC\"s /Baths shall be upto 35cm, which is to be taken into accountwhile quoting the rate against this item (c) Rate quoted by contractor shall be deemed to be included for all the horizontal and vertical treated surfaces of sunken portions of WC & Bath. |
| 19 | M&L rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement includingpreparation of newly plastered surfaces of wall andapplying three coats of white washing, including taking down cement plaster from brick wall including racking out joints hacking for key, scrubbing down with water etc completeall as specified and directed by Engr-in-Charge. |
| 20 | M&L rendering 15mm thick in cm 1:4 with water proofing compound on other thanfair faces of brick work or concrete surfaces finished even and smooth without using extra cement including preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer, including taking down cement plaster from brick wall including racking out joints hacking for key ,scrubbing down with water etc complete all as specified and directed by Engr-in Charge. |
| 21 | M&L for complete removal of old decorative plastered surfaces of wall and applying two coats of oil bond distemper over and including a coat of 1 mm thick wall care putty including preparation complete all as specified and directed. |
| 22 | M&L for complete removal of old decorative plastered surfaces of ceiling and applying two coats of oil bond distemper over and including a coat of 1 mm thick wall care putty including preparation complete all as specified and directed. |
| 23 | M&L for complete removal of old decorative plastered surfaces of walland applying two coats of cement base paint includingpreparation complete all as specified and directed. |
| 24 | M&L for machine cut Kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over and including 15mm thick screed bed in CM 1:4, complete all as specified. |
| 25 | M&L machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including 15 mm thick rendering in CM 1:4 and jointed with grey cement slurry mixed with pigment tomatch the shade of the slab including rubbing and polishing, complete all as specified and directed. |
| 26 | Dismantlingwater tank exc 250 but n.exc 500 ltr complete all as specified and directed. |
| 27 | M&L for Rotational moulded triple layer polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of 500 ltrs capacityin SSR Part I complete and all specified and directed. |
| 28 | Dismantlingwater tank exc 500 but n.exc1000 ltr complete all as specified and directed. |
| 29 | M&L for Rotational moulded triple layer polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of 1000 ltrs capacityin SSR Part I complete and all specified and directed. |
| 30 | S&Fball brass valves 20 mm high pressure ,with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed in position complete all as specified and directed. |
| 31 | S&F 20 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in-Charge |
| 32 | S&F 15 mm bore angle cock, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge |
| 33 | S&F 15 mm bore concealed stop valves fancy type chromium plated with long shank, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipeall as specified and directed by Engr-in-Charge |
| 34 | S&F 15 mm bore bib taps, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed down for iron pipe or brass ferrule and fixed completeall as specified and directed by Engr-in-Charge |
| 35 | Demolition brick work or stone masonry built in cement mortar or cement lime mortar complete all as specified and directed. |
| 36 | Demolition and bracking up150 mm drain pipe complete all as specified and directed. |
| 37 | S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 38 | S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wallscomplete all as specified. |
| 39 | S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 40 | S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified. |
| 41 | S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 42 | S&F 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 43 | S&F PVC (SWR) floor trap 75 mm dia, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 44 | S&F PVC (SWR) bendswith access door any radius (110 mm bore) complete all as specified and directed by Engr-in-Charge. |
| 45 | S&F PVC (SWR) bends any radius (75 mm bore) complete all as specified and directed by Engr-in-Charge. |
| 46 | S&F PVC (SWR) bendswith access door any radius (110 mm bore) complete all as specified and directed by Engr-in-Charge. |
| 47 | S&F SWR gullytrap with grating 125\110 mm fixed with solvent cement complete all as specified and directed. |
| 48 | S&FPVCSWRvent crowl 75 mm fixedcomplete all as specified and directed. |
| 49 | S&F PVCSWRvent crowl 110 mm fixed complete all as specified and directed. |
| 50 | S&F vitreouschinawater closet , Orissapatternsize 680 mm x 470 mm complete all as specified and directed. |
| 51 | S&F in repair 10 litre capacity PVC low level flushing cistern ‘ white’ with inlet, float valve including bracket with 32mm dia PVC pipe 600 mm long complete complete all as specified and directed. |
| 52 | S&F vitreous china bowl urinal flat back, of size 465mmx355mm and 265mm white (minimum), with grating and union for discharge pipeincluding providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and includingdischarge pipe of PVC 32mm dia complete all as specified and directed. |
| 53 | S&F in repair brass chromium plated towel rail 20mm dia \"D\" type 600mm long between flanges,of with and including chromium plated brass screws etc complete all as specified and directed. |
| 54 | S&F in repairs wash hand basin vitreous china white of size 550 mm x 400mm excluding taps, waste chain and plug and porcelain stopper nut including brackets, 32mm waste fittings and waste pipe of 32mm bore, brass chromium plated for glazed ware wash basin and 15mm dia pillar taps chromium plated fancy type etc complete all as specified and directed. |
| 55 | S&F Urinal spreader of PTMT any colour for fixing with 15mm diapipe complete all as specified and directed. |
| 56 | S&F in repair brass chromium plated shower rose complete all as specified and directed. |
| 57 | S&F in repairs, 600 mm x 900 mm looking mirror 5.50mm thick selected quality glass with PVCsheet backing fixed with brass screws and cup washers all as specified and directed by Engr-in-Charge. |
| 58 | S&F PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 59 | S&F PVC connections 15 mm size with PTMT nuts of length 300 mm complete all as specified and directed. |
| 60 | Taking down chowkhats or frames with shutter (without taking of shutters from the frame not exc 1.5 Sqm each and removing from site complete all as specified and directed. |
| 61 | Taking down chowkhats or frames with shutter (without taking of shutters from frameexc 1.5 Sqm each but not exc 4 sqm each and removing from site complete all as specified and directed. |
| 62 | S&F factory made solid PVC door frame of size 50 mm x 47mm made out of 5mm plain colour PVC sheet re-inforced withMS square tube, supplying and fixing in opening as per manufacturers instructions drawings and specifications complete all as specified and directed. |
| 63 | S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MSframe shall be covered with heat moulded plain colourPVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown as per specification and drawing and directed by GE/Engineer-in-Charge. |
| 64 | S&F150 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 65 | S&F butt hinges, 100 mm long medium weight, stainless steel complete all as specified and directed. |
| 66 | S&F aluminium handles 150 mm long cast type, anodised complete all as specified and directed. |
| 67 | S&F for2nd class soft woodplain, solid, straightchowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinnedat joints, complete all as specified. |
| 68 | S&F for plain framed, panelled shutters 30mm thick 2nd class softwood, (any numbers of panels), with panels of timber flats on both sides of veneered particle board medium density, wood particle board with commercial face fitted to chowkhats complete all as specified and directed. |
| 69 | S&F for 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 70 | S&F for mild Steel butt hinges med. Weight, cold rolled 100mm long complete all as specified and directed. |
| 71 | M&L for mild steel pressed handles, oval type, stove enamelled black of 150 mm long complete all as specified and directed. |
| 72 | S&F200 mm long mild steel barrel tower bolts stove enamelled black with bright bolt and fixed complete all as specified and directed. |
| 73 | S&F factory made steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay ,complete with glazing bars dovetailed or welded complete all as specified and directed. |
| 74 | S&F factory made steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete without glazing bars dovetailed or welded complete all as specified and directed. |
| 75 | S&F framed work such as grills gratings etc with ends of bars shoulders and /or riveted ,or forged into spicks ,framed guard bars ,barred iron doors etc all as specified and directed by Engr -in- Charge. |
| 76 | S&F for 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified. |
| 77 | S&Fgalvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed |
| 78 | M&L for two coat of synthetic enamel paint over old steel surface of any description over 10 cm in width or grith, not otherwise described including preparation complete all as specified and directed. |
| 79 | M&Lfor two coat of synthetic enamel paint over a coat of pink primer on new wood or wooden surfaceof any description over 10 cm in width or grith, not otherwise described including preparation complete all as specified and directed. |
| 80 | M&Lfor preparation of new steel surface of any description, over 10cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over red oxide, zinc chrome primer complete all as specified and directed. |
| 81 | Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan depth and getting outhard and dense soil complete all as specified and directed. |
| 82 | M&L PCC 1:4:8, type D2 (using 40mm graded stoneaggregate) as in foundation complete all as specified and directed |
| 83 | M&L cement concrete 1:2:4, type B1 (using 20 mm gradedstone aggregates) as in coping including form work complete all as specified and directed. |
| 84 | M&L for brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 complete all as specified and directed. |
| 85 | M&L for rendering 15mm thick in cement mortar 1:4 on brick walls finishing even and fair including necessary scaffolding work etc complete with water proofing compound all as specified and directed. Note: WPC shall be measured and paid separately. |
| 86 | Supply only integral water proofing compound complete all as specified and directed. |
| 87 | M&L for reinforced concrete pipes, 150 mm dia class NP2, laid and jointed complete all as specified and directed. |
| 88 | M&L pre-painted galvalume aluminium zinc coating GI based plain sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa modified as rain water channel of size as specified, fixed with self tapping screws and binding wire etc complete all as specified and directed by Engr-in Charge. |
| 89 | M&L loose filling with broken stone aggregates of gauge 40 to 80 mm in soakage pits soakage wells complete all as specified and directed |
| 90 | M&L PVC under ground tank of 5000 Ltrs capacity including 150 mm thick PCC foundation ,RFR & removing surplus soil from outside of MOD land complete all as specified. |
| 91 | M&L bands ,straps, supports or stays for rainwater ,ventilating pipe, including bolts, if required; hooks (stay) heavy, for large gate, hook and pintal hinges, large hasp staples, chains, hand made sliding bolts, clamps hold fast, wall ties, hooks for hanging fansplain, angle, cleats, for securing purlines to wood /steel trusses or rafters, knee piece inserts, two way and three straps, plate washers and similar small articles confirming to Fe-290 Gde -E-165 complete all as specified and directed. |
| 92 | Returning, filling in, including spreading, levelling, watering & well ramming in layers n exc 25 cm with any type of soil complete all as specified and directed. |
| 93 | Removing excavated material to be a distance n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point ,complete all as specified. |
| 94 | Construction of 100 users RCC Septic tank design to carry sewage and sullage water, excavation in any type of soil ,PCC 1:4:8 below foundation ,RCC M-30 Design Mix in Walls ,Base Slab, Baffle Walls and Roof Slab incl beam etc with vent shaft, manholes openings with cover connection etc, complete with effective depth of 1.5metre and over all depth 3 metre complete all as specified and directed by Engr- in- Charge. |
| 95 | Construction of Soakage well, excavation in ordinary soil, foundation in PCC 1:3:6, Wells of honey combed and solid brick work in CM, RCC cover slab in , filling with brick bats complete of size 3.00 m dia x 4.50 m deep complete all as specified and directed. |
| 96 | Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings, removing material from site for taking credit etc and making good disturbed surfaces of wall, floors to match with existing surfaces, complete all as specified and directed. |
| 97 | M&L for point wiring One light /one fan/one bell point controlled by one switch, with PVC insulated unsheathed single core multistranded copper conductor 1.5 sqmm, 1100 Volts grade cable, FRLSH, drawn through PVC casing capping/PVC conduit 20mm dia (as per site requirement) including accessories and provinsing of PVC boxes for mounting switches, switch socket, fan regulator, provn of modular Teresa plate Irene stripes, No of modules as required on site or as directed by Engineer-in-Charge including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) earth wire and connected to earth dolly complete all as specified and directed. |
| 98 | All as per ser Item No 97 here-in-before but point wiring for One socket outlet 5 pins 5 Amps controlled by one switch on same board . |
| 99 | All as per ser Item No 97 here-in-before but point wiring One socket outlet 5 pins 5 Amps controlled by one switch on independentboard. |
| 100 | All as per item No 2 herein before but wiring with 2.5 sqmm copper wire ( FRLS)and 2.5sqmm earth wire for socket outlet 6 pin 15 amps on independent board. |
| 101 | S&F switch piano flush button single pole, one way 5 Amps complete all as specified and directed. |
| 102 | S&F socket outlet multi 5 pins 6 Amp,complete all as specified and directed. |
| 103 | S&F switch socket combination 2 in 1, 6A flush type complete all as specified and directed. |
| 104 | S&F switchsocket combination 3 pin 16A, flush type complete all as specified and directed. |
| 105 | S&F ceiling rose, PVC/poly carbonate, isolated body three terminal complete all as specified and directed. |
| 106 | S&F in renewal LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rosecomplete all as specified and directed. |
| 107 | S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 Watts 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 108 | S&F in renewal LED light fitting 1x9W/1X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 109 | S&F in renewal circular/Square (as per site Requirement) shape 15 Watts 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 110 | S&Flamp holder angle typePVC/Poly carbonate type insulated body with back plate suitable for batten/wallfitting complete all as specified and directed. |
| 111 | S&F LED Bulb 9 Watt complete all as specified and directed. |
| 112 | S&F in repair distribution boards VTPN, 4 way, doubledoor 415 Volts 50 Hz ,ACincluding fixing on suitable rectangular block complete all as specified and directed by Engr-in-Charge. |
| 113 | S&F in repair MCCB ,200 Amps, 4 Pole breaking capacity 16KA, 415 Volts, 50 Hz with sheet metal enclosure complete all and specified and directed by Engr-in-Charge. |
| 114 | S&F in repair MCCB ,100 Amps, 4 Pole breaking capacity 16KA, 415 Volts, 50 Hz with sheet metal enclosure complete all and specified and directed by Engr-in-Charge. |
| 115 | S&F in repairs sheet metal enclosure for DBs (double door type) when MCBs to be used single pole and neutral 8 way incl blanking plate as reqd with 200 amps rated bus bar 240V fixed sunk/flush to the wall or niche including taking down old one complete all as specified and directed. |
| 116 | S&F in repairs sheet metal enclosure for DBs (double door type) when MCBs to be used single pole and neutral 4 way incl blanking plate as reqd with 200 amps rated bus bar 240V fixed sunk/flush to the wall or niche including taking down old one complete all as specified and directed. |
| 117 | S&F MCB single pole & neutral40 to 63 Amps 230 Volts \"C\" series, 10 KAcomplete all as specified and directed. |
| 118 | S&F MCB\"s single pole 240 Volts 6 to 32 Amps 10 KA \"C\"series, all as specified and as directed by Engr -in-Charge. |
| 119 | S&F in renewal, electric water heater storage type steel body and heaters element upto 2KW, capacity 25 ltr along with all accessories BEE 5 star rated, complete all specified and directed by Engr-in-Charge. |
| 120 | S&F exhaust fan, steel bodyAC single Phase. 230V of size 300msweep with, blades, and frame and, louvers complete all as specified and directed. |
| 121 | M&L for sub main wiring with two single core 10 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor FRLS ISI marked drawn into & including medium grade PVC conduit/ casing capping25 mm dia with all fittings and accessoriesand one continuous run of 10 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC casing / conduit (not less than 25mm outer dia) with all fittings and accessories fixed concealed/ surfaceincluding taking down old unserviceable sub main wiring and making good disturbed surfacecomplete all as specified and directed.Note:Two runs of 10 sqmm and one run of 10 sqmm cable and one run of casing capping shall be measured as one RM |
| 122 | M&L for sub main wiring with two single core 6 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor FRLS ISI marked drawn into & including medium grade PVC conduit/ casing capping25 mm dia with all fittings and accessoriesand one continuous run of 6 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC casing / conduit (not less than 25mm outer dia) with all fittings and accessories fixed concealed/ surfaceincluding taking down old unserviceable sub main wiring and making good disturbed surfacecomplete all as specified and directed.Note:Two runs of 6 sqmm and one run of 6 sqmm cable and one run of casing capping shall be measured as one RM |
| 123 | M&L for sub main wiring with two single core 4 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor FRLS ISI marked drawn into & including medium grade PVC conduit/ casing capping25 mm dia with all fittings and accessoriesand one continuous run of 4 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC casing / conduit (not less than 25mm outer dia) with all fittings and accessories fixed concealed/ surfaceincluding taking down old unserviceable sub main wiring and making good disturbed surfacecomplete all as specified and directed.Note:Two runs of 4 sqmm and one run of 4 sqmm cable and one run of casing capping shall be measured as one RM |
| 124 | S&F bldg security light fitting in repair LED 35 Wattfor Energy saving and environmental friendly long life made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection and Impact resistance of IK07 including driver unit and bracket made up of GI tube of suitable size (1.2 Mtr Length)etc complete all as specified and directed by Engineer-in-Charge. |
| 125 | S&F in renewal of off load changeover switch AC, 4 pole, 415 volt upto 250 Amps complete all as specified and directed Engr-in- Charge. |
| 126 | M&L for earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mmthick buried directly in ground (earth pit not less than 2.25mdeep below normal ground level) with top edge of the plate not less than 1.5mbelow normal ground level, connected to galvanized iron wire 4.0 mm diaby means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore includingGI lightgrade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25mmx25mmx3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion complete all as specified and directed. |
| 127 | S&F one loop main control panel microprocessor based addressable type fire control panel with indication with battery power pack and testing completefire control panel complying with , BS EN 54 panel of capacity from99 detectors & 99 modules upto 200 detector.Note for Srl Item No. 1 & 2 : Test Certificate through OEM is required to submit to Engr-in-Charge, after installation of loop panels with original panel CD & line diagram of complete fire alarm of concerned bldg reprogramming with correct indication of smoke dectors, heat detectors, MCP, fault isolator, responses indicators, electric hooter and siren etc and modules including taking old one complete all as specified and directed by Engr-in-Charge. Make Apollo / Honeywell /ESTFire alarm control panel |
| 128 | S&F addressable photo electric type smoke detector with base for fitting of smoke detector including taking old one all as directed. Make: Apollo / Honeywell / Minimax |
| 129 | Supply fix multi detector with fixed temperature range of 65C and rate of 25C /sec withLED indictor lamps suitable for addressable type with base for fitting of detectorincluding taking old one complete all as specified and directed. Make: Apollo . Honeyweel / Minimax |
| 130 | S&F manual call point suitable for analogue addressable type fire alarm systemincluding taking old one complete all as specified and directed. Make: Apollo / Honeywell / Minimax |
| 131 | S&F new electric hooter suitable for addressable type alarm systemincluding taking old one complete all as specified and directed. Make : National / Honeywell / Dekars |
| 132 | S&F connecting testing led add battery 12 Volts, 7AH suitable for addressable fire alarm system including taking old one complete all as specified and directed.Make : Exide/Amar Raja/ Amron |
| 133 | S&F laying 2 core 1.5Sqmm PVC sheathed armoured copper conductor cable 1100 Volts grade FRLS cable including taking old onecomplete all as directed. Make Fineable/Finolex/ Havells |
| 134 | S&F PVC conduit of 20mm dia to the wall surface using clips of necessary size including taking old one complete all as specified and directed by Engg-in-Charge. |
