|
| 1 | Dismantling& removingthe old damaged following item of worksas per the requirementat siteincluding scaffolding, disposing the sameat specified place within all leads and lifts including supplying of all labour, T&P etc all complete as per the direction of Engineer-in-charge. (Excludingcost of GST) For allfloors |
| 2 | Plaster |
| 3 | A.S Flooring |
| 4 | Brick work |
| 5 | gradedconcrete |
| 6 | RCC ( dismantling ofwater tank roof, outside chajja,column,beam etc) |
| 7 | Brick work in Fly Ash Bricks of size 25cmx 12cm x 8cm and having crushing strength not less than 75 Kg/Cm² to 99Kg/Cm² with C.M (1:6) including splay/cutting, racking out the joints curing, hoisting, staging at any height with cost and supply of all materials, labour,T&P, taxes, royalties, transportation charges, curing, testing charges etc. all complete but excluding GST as per direction of Engineer-in-charge.( For all Floors ) ( For parapet,water tank wall,balconyetc) |
| 8 | 12 mm thick Cement plaster with cement mortar (1:6) proportion, over brick work including racking out the joints, finished smooth to the exposed surface, rounding the corners wherever found necessary including cost & supply of all materials, labour, T&P,staging, scaffolding, watering, curing, taxes, tollage, royalties, etc. complete but excluding GST as per direction of Engineer-in-charge. ( For all Floors ) ( For water tank roof, outside chajja,column,beam,finetc) |
| 9 | 12mm.thick polymer plaster with CM(1:4) to roof ceiling balcony drops, other R.C.C. surfaces with using “SIKA RUSTOFF” and “SIKA LATEX”, “SIKA HIGH BOND” or equivalent chemicals including scaffolding, curing, etc. as per direction of Engineer-in-charge (All floors)Excluding cost of GST. ( For water tank roof, outside chajja,column,beam,finetc) |
| 10 | 25mm. thick A.S. flooring in cement concrete (1:2:4) at all floors & levels using 12mm. and down grade hard granite chips of approved quality including mixing, hoisting, laying, consolidating, curing, by water tanker, finished smooth to the exposed surface with a floating coat of cement punning, rounding the corners where found necessary including cost of supply of all materials, labour, T&P, taxes, tollage, royalties, transportation charges, etc. complete & as per direction of Engineer-in-charge.(Excluding GST) |
| 11 | Providingand applyingfibre reinforcedelastomericliquidwater proofingmembranewith resilientacrylicpolymerhaving sunreflectiveindex (SRI)of105 on top ofconcrete roof in 03 [email protected] ltr/10sqm ,one coat ofself primingof elastomeric water proofing liquid ( dilution with water)in the ratio of 3:1and02 coats of undilutedelastomeric water proofing liquid ( dry filmthicknesss of complete application / system not less than 500 micronorequivalent,the operation shall be carried out after scrapingand properly cleaning the surface to remove particleswith wire brushescomplete in all respect as per the direction of engineer-in-charge ( Excluding GST) |
| 12 | Supplying of 110mmΦ PVC pipe(ISI make) with all fittings of required length including removing /dismantling the damaged/broken portion of pipe & fixing the same in position with PVC clamp, bobbin, brackets with leak proof joints, etc with supply of all labour, T&P, etc. as directed by Engineer-in-charge.(Excluding GST) ( For all Floors ) |
| 13 | Cement concrete (1:11/2 :3)) using 12mm to 20mm size C.B.G. chips for all floors,foundation & plinth etc. of approved quality mixing, hoisting,laying, compacting, scaffolding , curing with cost and supply of all materials, labour,T&P, taxes, tollage, royalties, etc. all complete but excluding GST as directed by Engineer-in-charge. ( For all Floors ) ( For water tank roof, outside chajja,column,beam,finetc)( special nature of work) |
| 14 | Providing rigid smooth leak proof centering & shuttering made of steel/ply, plank of approved quality for R.C.C. structures, stagingand deshuttering and removing the same after due period with supply of all materials, labour, T&P, taxes, royalties, tollage, etc. all complete but excluding GST as directed by Engineer-in-charge. ( For all Floors )( For water tank roof, outside chajja,column,beam,finetc) |
| 15 | Supply TMT rebarof minimumgradeFe-500confirming to IS-1786 including cutting, straightening, bending,binding & placing the grills in position for RCC works binding the grills with binding wire of 18 to 20 gauge including supply of steel, labour,materials, transportation charges, T&P, taxes, etc. all complete but excluding GST as per the direction of Engineer-in-charge. (NB: No payment shall be made for extra weight than theoretical co-efficient). ( For all Floors ) |
| 16 | Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m lead with supply of all labour, T&P,staging, scaffolding, etc. complete cleaning the debrises with all taxes,including leads & lifts transportation & disposing at specified place and as per direction of Engineer-in-charge.(Excluding GST).( For all Floors ) |
| 17 | Taking out the Door and Window shutters and refixing them including screws as may be required etc. complete as directed by Engineer-in-charge (Excluding GST). ( For all Floors ) |
| 18 | Door |
| 19 | Window |
| 20 | Repairing of old damaged door/windowSupply of 32mm thick seasoned Non-Sal/Hardwood paneled Door/window shutters as is where requiredhaving both side styled moulded having bottom rail of 200 mm thick,top rail 100mm thick , middle lock rail 200 mm thick alongwith straight vertical moulded style of 125mm width (total 2 panels) and panel should be 20 mm thick piasal plank embedded 16mm to styles & rails with one no of aluminum aldrop of size 300mm x 16mm x 40mm, two nos of 150 mm with 175mm x 40mm flat aluminum handles, 2 nos. of 200 mm x 10mm aluminum tower bolts and required numbers of wooden hinged cleats, fixing at position etc all complete . including cost of all materials, labour, loading & unloading Charges, all taxes, transportation charges, stacking at site store etc. all complete as directed by Engineer In-Charge.(Excluding GST)( For all Floors ) |
| 21 | Suplying, fitting & fixing of Mosquito proof net ( Netlon ) of approved quality for window & ventilator after removing the damaged nets , changing with new net fixed to proper position by stiching male female velcro tape all complete including removing of existing old damaged frame from position,all complete includingcost & supply of all materials, nail, labour, T&P, taxes, transportation, removing the existing old frames from position etc. as per direction of Engineer- in- charge.Excluding GST. ( For all Floors ) |
| 22 | Supplying, fitting, fixing of Mosquito proof net door shutter made out of seasoned piasal wood (32mm X 75mm Size) batten for style, top rail, bottom rail, lock rail with mosquito proof net ( plasto net 20mm X 20mm square mesh )/ (Netlon insect screens 20mm X 20mm square mesh) of approved quality , make with wooden beading ,nail and fixed the new frames with all aluminium Handles, tower bolts, stainless steel hinges of approved size, quality etc. all complete including cost & supply of all materials, nail, labour, T&P, taxes, transportation, removing the existing old frames from position etc. as per direction of Engineer- in- charge.Excluding GST. ( For all Floors ) |
| 23 | Supplying R.C.C. door /window frames of cross section 100mm X60mm of m-25 concrete using OPC-43 Grade cement and steel reinforcement of 5.5mm to 6mm dia M.S Rod with provision of hinges,locks,W.I.Clamps.etc all complete as directed by E.I.C,Excluding GST. |
| 24 | Labour charges for fitting & fixing ofDOOR frame clampswith supply of all labour, T&P, taxes etc. all complete as per direction of Engineer-in-charge.(Excluding GST) |
| 25 | Supplying, fitting, fixing Sal wood frame choukaths for doors, windows,ventilators,coaltaring two coats to wall side face of frame, fixing to position with required nos. of W.I. clamps of size 25cm to 30cm long,35mm wide, 2mm to 3 mm thick in C.C(1:3:6) including cutting grooves in choukaths, jointing with adhesive solution fixing to proper position etc. all complete including cost and supply of all materials, labour, T&P,all taxes, transportation, staging, scaffolding etc. complete as directed by the Engineer-in-charge..(Excluding GST). ( For all Floors ) NB: Without painting. |
| 26 | Supplying, fitting, fixing up AL window (sliding type) made up aluminum Section 9778 aswindow fram, section No. 4095, 4096 & 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber bending including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer in charge. Excluding GST.( For all Floors ) |
| 27 | Supplying, fitting & fixing of WPC door and window frames ofsize( 50x70mm)of 0.75 densitywith all fittingsandfixtureswith stainless steelincluding cost of loading & un-loading charges,with supply of all labour, materials like hinges, T&P, all taxes, transportation, etc. all leadand liftcomplete as per direction of Engineer-in-charge (Excludingcost of GST) |
| 28 | Supplying fitting and fixing of 25mm thick WPCdoor shutter of 0.55 densitywith all fittingsandfixtureswith stainless steelincluding cost of loading & un-loading charges,with supply of all labour, materials like hinges, tower bolt, handle, aldrop etc. T&P, all taxes, transportation, allleadand liftetc. complete as per direction of Engineer-in-charge (Excludicng cost of GST) , |
| 29 | Supplying of following itemsof ISImark & specificationincluding cost and supply of allmaterials , transportation charges, depositthe samein departmental storeif required etcall complete as per the direction of Engineer-in-charge(Excluding GST) |
| 30 | 12mm. BWR Ply Wood |
| 31 | 19mm. BWR Ply Wood |
| 32 | 6mm. BWR Ply Wood |
| 33 | 9mm. BWR Ply Wood |
| 34 | Aluminium Handle 125mm. |
| 35 | AluminiumHandle 100mm. |
| 36 | AluminiumTower bolt barrel type (150mm X 10mm). |
| 37 | AluminiumTower bolt barrel type (100mm X 10mm). |
| 38 | AluminiumAldrop (15mm X 300mm long). |
| 39 | AluminiumHinges (125mm. X 75mm. X 4mm.). |
| 40 | AluminiumHinges (100mm. X 50mm. X 4mm.). |
| 41 | AluminiumHinges (75mm. X 63mm. X 4mm.). |
| 42 | AluminiumHinges (50mm. X 35mm. X 3.2mm.). |
| 43 | Aluminium300 X 16mm. Stainless Steel Aldrop (Stapple). |
| 44 | Wood primer. |
| 45 | Red Oxide primer. |
| 46 | Enamel paint. |
| 47 | Thinner |
| 48 | Wair nail (1/2\" to 6\"). |
| 49 | Pin (3/4\"). |
| 50 | Stainless butt hinges (75mm. X 47mm. X 0.70mm). |
| 51 | Fevicol. |
| 52 | 5mm. Thick plain / frosted colour glass. |
| 53 | Cement. |
| 54 | Sweet Sand. |
| 55 | Oxidised Mild Steel screws 50mm. |
| 56 | Oxidised Mild Steel screws 40mm. |
| 57 | Oxidised Mild Steel screws 30mm. |
| 58 | Oxidised Mild Steel screws 25mm. |
| 59 | Oxidised Mild Steel screws 20mm. |
| 60 | Latex(Synthetic Rubber Emulsion) |
| 61 | Epoxy Bonding Agent |
| 62 | Supplying, fitting, fixing of MS welded grills, fabricatedwith I.S.A , M.S flat, weldedto approved design, size, fixed to position with screws, nails and grouting to walls in C.C (1:2:4) including cutting grooves in walls and making good the damages with cost and supply of all materials, labour, T&P, taxes, transportation, welding charges , grinding, staging, scaffolding, curing etc. all complete as per the direction of Engineer in charge.(Excluding GST). ( For all Floors ) |
| 63 | Distemperingof approved quality and shade to old work including supplying cleaning, brushing, the old paint, removing the flakes and finishing smooth the wall surface by applying plaster of paris or wall putty where required, sand papering including cost & supply of all material labours, T&P scaffoldings, taxes etc. complete but excluding cost of GST as directed by the Engineer in charge. ( For all Floors ) |
| 64 | one coat |
| 65 | two coats |
| 66 | Painting one coat with approved quality & shade enamel wood paint on old wood workover one coat of primer including scraping, cleaning, the old paint surface sand papering,filling the holes with wax putty etc. all complete including cost and supply of all materials,labour, T&P, all taxes, transportation charges, staging, scaffolding, etc. all complete but excluding GST as per direction of Engineer-in-charge. ( For all Floors ) |
| 67 | Providing & fixing of 32mm thick factory made paneled hard wooddoor,windows, made out of duly seasoned & treated hard woods. The Styles, Rails & Intermediate rails are kiln seasoned as per IS-1141, ASCU Chemically pressure treated as per IS-401, Panels are also seasoned and chemically pressure treated made out of hard wodas per IS-1003/Part-I & II . Necessary fitting & Fixtures to fix the shutters inposition with Screws of stainless steel et. with cost of loading & un-loading stacking at departmental stores including dismantalling the damaged shutters and depositing the old/damaged/dismanttedshutter at section office with supply of all labour, materilas ,T &P, all taxes, transportation, etc. complete as per direction of Engineer-in-charge.(Excluding GST)( For all Floors ) |
| 68 | Scrapping old paint, heavy moss with scraper, coir brush and sand paper, then washing cleaning the exterior wall surface with soap/soda water using adequate capacity of water tanker, pump set and drying the surface followed by one or more coats of biowash at at any height including all cost & supply of materials, hire and running charges of water tanker, pump set, labours, T&P, taxes, all transportation, staging, scaffoldings, water charges etc. complete for all floors as directed by the Engineer-in-charge.( Excluding the cost of GST) |
| 69 | Painting two coats with acrylic based weather coat to exterior wall surface with approve quality and shade by brush go give an even surface including scaffolding, scrapping, cleaning the surface with supply of all labour materials T&P taxes, etc. complete as directed by Engineer-in-charge(Excluding cost of GST) . |
| 70 | Supply of Carpenter & helperfor attending day-to-day maintenance work with all complete as per the direction of Engineer-in-charge (Excluding GST)(Including EPF & ESI) |
| 71 | Skilled labour ( Carpenter & Mason) |
| 72 | Un-Skilled labour ( helper) |
