|
| 1 | Taking down existing roof membrane with concrete padding upto original roof and removing the debris from the site etc complete all as specified and directed |
| 2 | Demolition of cement concrete (Un-reinforced) in ground floor and paving nexc 15cm thick above or below GL complete all as specified and directed |
| 3 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in mortar complete all as specified and directed. |
| 4 | Dismentalling floors hearth or wall tilling including cement mortor bedding (but not backing) removing serviceble tiles to store and rubbish off the premises complete all as specified and directed |
| 5 | Demolition of brick work or stone masonary built in cement mortor including all quoins & jambs etc. complete all as specified and directed |
| 6 | Taking down cement plaster of any description on brick work or stone msonary wall including racking ot joints hacking for key scrubbing down with water etc. complete all as specified and directed |
| 7 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as directed and directed |
| 8 | Taking down chowkhats or frames with shutters (without taking off shutter from frames) of any sizes nexc 1.5 Sqm complete all as specified and directed. |
| 9 | All as item No. 08.00 mentioned here-in-before but exc 1.5 Sqm and nexc 4.0 Sqm each. |
| 10 | Taking down of shutters of any description nexc 1.0 Sqm each complete all as specified and directed |
| 11 | Taking down of shutters of any descriptionexc 1.0 Sqm and nexc 2.0 Sqm each complete all as specified and directed. |
| 12 | Taking up or down steel tubing 15mm dia and connection complete all as specified and directed |
| 13 | All as per item No. 12.00mentioned here-in-before but 20mm dia bore. |
| 14 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 15 | Dismantling Plain or Corrugated Steel Sheeting any gauge, thickness, including nainital or similar roof coverings/sunshade, complete all as specified and as directed. |
| 16 | Dismantling AC Corrugated Sheets as in Roofing including Ridge or Similar Pattern Roof Coverings, complete all as specified and as directed. |
| 17 | Dismantling Timber Scantlings, 40 Sqcm and over in Section, in any Position, in Unframed Work, complete all as specified and as directed. |
| 18 | Dismantling Timber Fillets, Rails, Posts, Rafters, Purlings, etc., under 40 Sqcm in Section, in any Position, as in unframed Work, complete all as specified and as directed. |
| 19 | Dismantling of Wall and Ceiling Board (Fibre, Pulp, Insulation etc.) or Insulation Board/Slab /Blankets, any thickness including Cover Fillets, complete all as specified and as directed. |
| 20 | M&L for Steel work in tubular/hollow as intrusses, purlin, rafter etc conforming to IS-4923 grade YSt.-240 complete all as specified and directed |
| 21 | S&F Roof trusses (framed) , trussed , purlines, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or Flat section) including distance pieces , cleats etc Fe-410W (Gde E-250 Quality `A\" complete all as specifed and directed. |
| 22 | S&F MS Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. in-cluding cleats, brackets, etc. Fe-290 (Gde E-165) complete all as specifed and directed. |
| 23 | S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw complete all as specified and directed |
| 24 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in cover sheet for crumple section, fixed with brass screw complete all as specified and directed |
| 25 | S&F Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame including 5 mm thick PVC sheet fillet of width 35mm for wall Paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed. |
| 26 | S&F Solid PVC Wall Lining consisM&L False ceiling with \"E\" board \"Classic\" , reinforced, designer series, board with HPSC of size 600 mm x 600 mm x 4 mm thick fixed on aluminium powder coated snap grid to support the boards/tiles with aluminium anodised main \"T\" section 36mm x 25mm x 1.40mm cross tee 23.50mm x 23.50mm x 1.40mm thick and aluminium angle 25mm x 25mm x 1.40mm as on edges/sides including hanging arrangements with 6mm dia GI hooks and clampand applying two coats of oil bound distemper over a coat of alkali resistant primer on exposed surfaces complete all as specified and as directed. |
| 27 | Material and labour Chipping of unsound/weak concrete materials of 25-30mm average thickness from slabs/chajja/ fin fascia with lightly packing materials by ait blasting or sand blasting includingtaperingall edges, making square shoulders of cavities etc uptofour storey height of building including necessary scaffolding and safety measure complete all as specified and as directed by the Engr-in-Charge. |
| 28 | Removing rust from existing corroded reinforcement by mean od application of Rust Remover such as Hind Rust Clean (M/s Hindcon) or equivalent from M/s Pidilite/Forsoc and then washing the same to make the reinforcement scale free as per the direction of Engineer-in-ChargeNote : Payment to be made on exposed RCC area |
| 29 | S&F Welded steel wire fabric weight not more than 4Kg/Sqm fitted by ms nails complete all as specified and directed |
| 30 | Application of anticorrosive paint such as Hind Anti Rust (M/s Hindcon) or equivalent from M/s Pidilite/Forsoc on cleaned reinforcement as per manufacturer\"s specification complete including labour and material as per direction of Engineer-in-ChargeNote : Payment to be made on 25% of exposed area |
| 31 | Application of bonding coat based on polymer modified cementious material such as Nitobond SBR/Hind Styrene BR (M/s Hindcon) or equivalent from M/s Pidilite/Forsoc @ 0.50 Kg/Sqm (due to rough concrete surfaces) to act as bonding agent between old and new concrete including material and labour as per manufacturer\"s specification and direction of Engineer-in-Charge |
| 32 | M&LPressure guniting at a pressure not less that 6Kg/Sqcm to surface of column, beam, ceiling, facia and similiar structural members in polymer modified concrete with mix ratio 1:1.5:3 (1 cement : 1.5 Coarse Sand : 3 Stone aggregate of 10mm nominal size) admixed with acrylic latex polymer @ 3.00 Kg per Sqm and plasticiser @ 100Gms per Sqm for an average thickness of 50mm (the concrete to be applied when the bonding coat is still green) including material and labour, scaffolding and formwork etc. as per manufacturer\"s specification complete all as per direction of Engineer-in-Charge. |
| 33 | M&L for providing cement concrete type B-0 (Using 12.50mm graded stone aggregate) as in padding and benching & filleting all as specified and directed. |
| 34 | M&L for 15mm thick screed bed or bedding over roof surfaces when concrete is still green with and including WPC in cement mortar 1:3 complete all as specified and directed |
| 35 | Preparation of plastered surfaces of roof and laying 3mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proofing membrane, black finished reinforced with non woven polyester matt laying over a coat of bituminous primer @ 0.40 Ltr / Sqm and two coats of Bitumen based UV reflective paint with aluminium finish over APP membrane. The membrane shall be laid using butane torch and sealing all joints etc all as specified and directed. |
| 36 | M&L Brick work with fly ash bricks designation 75 (kgf/cm2) straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed. |
| 37 | M&L half brick thick brick work with fly ash bricks designation 75 (kgf/cm2) straigth or curved on plan to any radius built in CM (1:4) complete all as specified and directed |
| 38 | M&L for applying polymer modified cement mortar rendering 20mm thick in CM 1:3 on wall duly mixing polymer modifier \"Nitobond SBR of M/s Forsoc Chemical India (Pvt) Ltd\" or \"Hind Styrene BR of Hindcon Chemical Ltd\" or equivalent make of M/s Pidilite Industries @ 7 Litre per bag of cementcomplete finished even and smooth without using extra cement complete all as specified and as per manufacturer\"s specification. |
| 39 | M&L rendering 15mm thick in CM (1:6) on other than fair faces of brick work or concrete surfaces even & smooth without using extra cement complete all as specified and directed |
| 40 | M&L rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces in two layer of 10+5mm and finished the surfaces even and fair without using extra cementand using water proofing compound of top layer of 05mm thick as per manufacturer instruction complete all as specified and directed |
| 41 | M&L rendering 5mm thick in CM (1:3) as in ceiling surfaces even & smooth without using extra cement complete all as specified and directed |
| 42 | Supply only liquid water proffing compound as specified |
| 43 | M&L Cutting chase, pinning in making good to facing where required and pointing in CM 1:3 to end or edges of landing steps, cills, sunshades, shelves, lintels etc. and cutting chase for conceled water pipe etc. and making good cutting not exc 10Cm girth. |
| 44 | S&F for 20mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 45 | S&F for 25mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 46 | S&F in repair for 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 47 | All as per item No. 46.00 mentioned here-in-before but double socketed complete all as specified and directed. |
| 48 | S&F in repair PVC (SWR) bend any radius 110mm bore complete all as specified and directed |
| 49 | S&F in repair PVC (SWR) junction single (single T) equal or unequal 110mm bore complete all as specified and directed. |
| 50 | S&Ffor PVC Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof Bore in pipe in 75mm to 150mm complete all as specified and directed |
| 51 | M&L for diameter of outlet 75mm UPVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed |
| 52 | M&L mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (anealed) not less than 0.9mm dia or securing with clips quality conforming to fe 410-S. |
| 53 | Use and waste of formworkto soffits of suspended slabs such as roof slabs,floor,slabs,landings and similar work not exceeding 200mm thickrough finished surfaces without using extra cement(Horizontal or slooping ) |
| 54 | M&L 75mm thick PCC (1:3:6) type C-2 (Using 40mm graded stone aggregate) as in plinth protection laid in panels, finish the top surfaces even and smooth without using extra cement complete all as specified and directedNote:- Construction joints will be provided at interval of 2.5m length and filled with bitumen 80/20 mix with sand in ratio of 1:3 and cost of the same shall be deemed included in quoted rate |
| 55 | M&L 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in of floor,finish even and faircomplete all as specified. |
| 56 | M&L Double charge light shade Vitrified Ceramic Tiles 8mm- 10 mm thick (square/ rectangular) , Polished,area of each tilenot exc 0.36 sqmas inFloors, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over 15mm thick screed bed in cement sand mortar (1:6) complete all as specified and as directed. |
| 57 | M&L Double charge light shade Vitrified Ceramic Tiles 8mm- 10 mm thick (square/ rectangular) , Polished,area of each tilenot exc 0.36 sqmon Vertical Surfaces such as Skirting, Dados, Risers to Steps, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over and including 10mm thick backing layerin cement mortar (1:4) complete all as specified and as directed. |
| 58 | M&L joint free non skid ceramic coloured tiles 8-10mm thick (square/rectangular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm in floor set and jointed in in neat cement slurry and pointed in cloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed |
| 59 | All as item No. 58.00 here in before but in skirting with and including 10mm thick rendering on fair faces of brickwork in CM 1:4 complete all as specified and directed. |
| 60 | M&L joint free non skid ceramic coloured tiles 8-10mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm in floor set and jointed in in neat cement slurry and pointed in cloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed |
| 61 | All as item No. 60.00 here in before but in skirting with and including 10mm thick rendering on fair faces of brickwork in CM 1:4 complete all as specified and directed. |
| 62 | M&L joint free non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm in floor set and jointed in in neat cement slurry and pointed in cloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed |
| 63 | M&L glazed ceramic coloured tiles 450x300x6-7mmin vertical surfaces set and jointed in in neat cement slurry and pointed in cloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed |
| 64 | M&L Granite (of any type) Work (Table rubbed and polished) 18 to 20 mm thick, in Steps, Cooking Platforms and like, Set in Screed bed of 20mm thick in Cement Mortar 1:4 including Pointing in White Cement 1:2 using Marble Dust with admixture of Pigment to match with Shade of Granite including Cutting and Polishing including half round edges, complete all as specified and as directed. |
| 65 | M&L RCC (Nominal Mix) 1:1.5:3 type A-1 (Using 20mm graded stone aggreagate) as in parapet, balcony, chajjas and similar works including Form work complete all as specified and directed. |
| 66 | S&F Machine cut kota stone slab flooring 20-25mm thick (size 550mmx550mm) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite finish polishing complete over 20mm thick 1:6cement mortar screed bed complete all as specified and as directed. |
| 67 | M&L for Pressed steel frames 1.25mm thick for doors with one or more rebates size of frame 125 x 60 mm including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.Note:- Pressed Steel Frame should be filled with PCC 1:3:6 Type C-0 (Using 12.50mm graded stone aggregate) and cost of PCC shall be deemed included in quoted rate |
| 68 | M&L for Pressed steel frames 1.25mm thickness for doors with one or more rebates size of frame 105 x 60 mm including necessary fixing lugs,hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.Note:- Pressed Steel Frame should be filled with PCC 1:3:6 Type C-0 (Using 12.50mm graded stone aggregate) and cost of PCC shall be deemed included in quoted rate |
| 69 | M&L for PCC 1:3:6type C-1 using 20mm graded stone agg as in bedblocks/hold fast complete all as specified and directed |
| 70 | S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides fitted to cowkhats complete all as specified and directed |
| 71 | S&F for 2nd class hardwood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats as specified in SSR Part-I 2009. |
| 72 | S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and directed. |
| 73 | S&F for Factory Made Solid PVC Moulded Door Shutter With Wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site complete all as specified and directed. |
| 74 | Providing and fixing factory made uPVC white colour sliding window (Area of each window not exceeding 2.00 sqm) Three track made of extrueded profiles with wall thickness of 2.3mm (+-0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52 mm), sliding sash (42mm x 67mm). Sliding mesh sash (42mmx57mm) Sliding interlock (one vertical length in each shutters) (45.5mmx28mm), Glazing bead (24.5mmx16mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gastket, 1.2 (+-0.2mm) thick galvanised steel fr Frame (30mmx18mm) 2 Nos, sliding sash (30mmx18mm) , sliding mesh sash (36mm x 10mm) profileto be inserted in required profile, frame will be fixed to the wall with 8mmx 100mm long fasteners, hardware (Touch Lock of Zinc alloyed (white powder coated), steel roller system, Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40 mm,tinted glass with sheet glass 4.80mm thick , pin head type and glazing in squaresexc 0.5 sq. M in each pane and required accessoreis complete all as specified and directed.(Note:- The unit rate quoted by contractor inclusive of cost of glass, wire cloth and all other connected accessories. Net Opening will be measured for payment purpose.) |
| 75 | S&F Powder coated Aluminium anodised doors, windows, partitions and ventilators using aluminium sections of size and type approved by Engineer-in-Charge including jointing cleats,snap beadingetc, completeallas specified and as directed. |
| 76 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing powder coated aluminium handle, tower bolt, door stopper as required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed of Engineer-in-charge |
| 77 | M&L 1.50mm thick power coated aluminium , three track sliding window with three nosshutters made ofaluminium section as per drawing no CWE/KOL/TD-33 of section no 1F-1F including necessary jointing cleats, glazing clips, rubber neoprene packing, roller,locking arrangement, handles 2 Nos , anodised aluminium snap beading screws etc.includingtinted glass with sheet glass 4.80mm thick , pin head type and glazing in squaresexc 0.5 sq. M in each pane and Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm Complete all as specified and as directed.Note Nos :- (i) All window memberincluding fitting & fixture i.eframe, track, shutter frame, etc shall be deem toincluded quoted rate. Only measure opening size of window. |
| 78 | S&F powder coated aluminium ventilators with louvers and glazing including frame of section over all size of window 600X450mm complete with following specification.(a) Alu frames of size 45x45x1.2mm (b) Rail & Stile 45x45x1.2mm thick (c) 4.80mm thick frosted sheet glassNote :- All ventilators/louvers memberincluding fitting & fixture shall be deem toincluded quoted rate. Only measure opening size of ventilators/louvers |
| 79 | S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 80 | Hacking out old broken glass any thickness size quality or description from metal frame including punching or drilling out old glazing pins/springs clips complete all as specified. |
| 81 | S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in square nexc 0.5 Sqm each pane. |
| 82 | S&F 4mm thick frosted glass panes and glazing with oil putty in square nexc 0.5 Sqm each pane complete all as specified. |
| 83 | S&F 100mm Butt hinges, extruded brass, with brass hinge pin, bright polished, complete all as specified and directed |
| 84 | S&F Aluminium anodised, barrel tower bolts of extruded section 200mm longcompleteall as specified and directed |
| 85 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy of 300mm long complete all as specified and directed |
| 86 | S&F Extruded aluminium alloy handles, fabricated type, anodised 150mm long complete all as specified and directed |
| 87 | S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, 150mm long complete all as specified and directed |
| 88 | S&FMild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete complete all as specified and as directed. |
| 89 | M&L 18/19 mm thick Medium density fibre board, exterior grade, fixed to timber framework with screws complete all as specified and directed. |
| 90 | S&F (piano) mild steel, bright finish or electro galvanised Width of flaps (When open) 30mm complete all as specified and directed. |
| 91 | S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished bright finished as in repair complete all as specified and as directed. |
| 92 | S & F in repair for chromium platedBib taps for 15 mm bore pipe complete all as specified and directed. |
| 93 | S & F in repair for brass chromium plated long body bib cock with Wall Flange for 15 mm bore pipe complete all as specified and directed. |
| 94 | S & F in repair for brass chromium plated two in one tap with Wall Flange screwed for 15 mm bore pipe complete all as specified and directed |
| 95 | S & F in repair for brass chromium plated Pillar Tap screwed for 15 mm bore pipe complete all as specified and directed |
| 96 | S & F work in repair for ABS body chrome plated shower rose 125mm size including fixing to steel pipe or union complete all as specified and directed |
| 97 | S & F in repair for shower arm 240mm long round shape with flage including fixing to steel pipe or union complete all as specified and directed |
| 98 | S & F in repair for 15mm bore brass chromium plated Angular Valve with Wall Flange complete all as specified and directed. |
| 99 | S & F in repair for 15mm bore brass chromium plated 2 Way Angular Valve with Wall Flange complete all as specified and directed. |
| 100 | S & F in repair for chromium plated Health faucet with 8mm Dia, 1.2 Meter long flexible tube and wall hook with N.R.V (Back Flow Preventer) |
| 101 | S & F in repair for Plastic water closet seat, in any coloure as directed closed pattern with flat/recessed bottom, and cover and mild steel chromium plated or aluminised hinging device for pedestal pan complete all as specified and colour as directed. |
| 102 | S & F in repair CP sink cock with swinging spout (wallmounted model) with Wall Flange screwed for CPVC pipe complete all as specified and colour as directed. |
| 103 | S & F in repair for 15mm bore brass chromium plated Wall Mixer with Provision for Overhead Shower with 115mm long Bend Pipe on Upper Side, Connecting Legs & Wall Flanges complete all as specified and directed. |
| 104 | S & F in repair for 15mm bore brass chromium plated Sink Mixer, Connecting Legs & Wall Flanges complete all as specified and directed. |
| 105 | S&F Central hole for Hot and Cold water supply basin mixer, brass chromium plated screwed down for iron pipes,including necessary fittings etc as in repair , complete all as specified and as directed. |
| 106 | Supply and fixing in repair Vitreous China wash down water closet pan including P or S trap (pedestal pattern), white (excluding flushing cistern and flush pipe) including plastic water closet seat, black colour , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device and wash down water closet complete all as specified and as directed. |
| 107 | S&F in repair vitreous china wash hand basin white of size 550 x 400mm excluding taps but including 32mm PTMT waste coupling (excluding 32mm waste pipe) complete all as specified and directed. |
| 108 | S&F in repair vitreous china squatting pan orrissa pattern size 580x440mm white with intregal foot rest including connection to trap, and flusing pipe, anti-syphonage pipe, etc and including lime concrete bedding complete all as specified. |
| 109 | S&F in repair PVC flusing cistern low level 10 Ltr capacity of approved make including fixing of brackets connection to WC with CI brackets and making good disturbed area complete all as directed. |
| 110 | S&F in repair PVC connection 15mm size with PTMT nut of length 450mm complete all as specified and directed |
| 111 | S&F Rotational Moulded Polyethylene (HDPE) Water Storage Tank 500 Litre Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I including provision of 25mm x 100mm GI nippples with check nuts for inlet, outlet wash and overflow pipe includingPTMT Ball Valve 20mm dia having mini -mum weight 210 Grams, high pressure with epoxy coated Aluminium Rod and high density Plastic Ball and Lowering of old/unserviceable Water Storage Tank of any description, complete all as specified and as directed. |
| 112 | S&F Rotational Moulded Polyethylene (HDPE) Water Storage Tank 1000 Litre Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I including provision of 25mm x 100mm GI nippples with check nuts for inlet, outlet wash and overflow pipe includingPTMT Ball Valve 20mm dia having mini -mum weight 210 Grams, high pressure with epoxy coated Aluminium Rod and high density Plastic Ball and Lowering of old/unserviceable Water Storage Tank of any description, complete all as specified and as directed. |
| 113 | S&F Rotational Moulded Polyethylene (HDPE) Water Storage Tank 2000 Litre Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I including provision of 25mm x 100mm GI nippples with check nuts for inlet, outlet wash and overflow pipe includingPTMT Ball Valve 20mm dia having mini -mum weight 210 Grams, high pressure with epoxy coated Aluminium Rod and high density Plastic Ball and Lowering of old/unserviceable Water Storage Tank of any description, complete all as specified and as directed. |
| 114 | M&L for preparation of new surfaces of wood and wood based materials of any descriptions not otherwise described over 10Cm width or girth & applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified. |
| 115 | M&L for preparation of old surfaces of wood or wood based materials of any descriptionand applying one coat of synthetic enamel paint over 10 Cm width or girth complete all as specified. |
| 116 | M&L for preparation of new surfaces of Steel and Steel based materials of any descriptions not otherwise described over 10Cm width or girth & applying two coat of synthetic enamel paint over a coat of red oxide on steel surfaces complete all as specified. |
| 117 | M&L for preparation of old surfaces of steel or steel based materials of any descriptionand applying one coat of synthetic enamel paint over 10 Cm width or girth complete all as specified. |
| 118 | M&L Preparing new Surfaces of Ceilng and applying Three Coats of White Wash, complete all as specified and as directed. |
| 119 | M&L Preparing new Surfaces of wall and applying Three Coats of White Wash, complete all as specified and as directed. |
| 120 | M&L Preparing old surfaces of internal walls and applying one coats of white wash, complete all specified and directed. |
| 121 | M&L Preparing new Surfaces of Walls and applying Two Coats of Cement Base Paintover a coat of primer complete all as specified and as directed. |
| 122 | M&L complete removal of existing Treatment of old decorated Surfaces of Walls and applying Two Coats of Cement based Paint over 10 cm width or girth over a coat of primer, complete all as specified and as directed. |
| 123 | Preparing old decorative Surfaces of walls and applying one Coat of cement base paint complete all as specified and as directed. |
| 124 | M&L preparing newly plastered surfaces and applying 2 coat of oil bound distemper over a coat of primer includingtwo coat of white cement based putty(approx 2mm thick) including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed. |
| 125 | M&L preparing old decorated surfaces and applying one coat of oil bound distemper complete all as specified and directed. |
| 126 | M&L Complete removal of existing Treatment of old decorated Surfaces of Walls andapplying Two Coats of DistemperOil Emulsionover a coat of primer andapplied over 3mm thickwater proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed. |
| 127 | M&L preparing newly plastered surfaces and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified & directed. |
| 128 | M&L complete removal of old decorated surfaces and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: Old work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified & directed. |
| 129 | M&L preparing old decorated surfaces and Finishing walls with one coat of Acrylic Smooth exterior paint of required shade complete all as specified & directed. |
| 130 | M&L Writing letters or figures ( any nos) in white colou over black colour background box of size 30 Cm x 30 Cm ( Block, Roman, Italic or Indian) n.exc 30 Cm height complete all as specified and as directed. |
| 131 | S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed |
| 132 | M&L for cutting down plants / trees of girth not exc 25 cm & area not exe 01Sqmeach from roof tops /sides of external walls of buildings, chajja, wall junctions, junctions of of rain water / soil /waste vent pipes including taking out roots entered in wall/slab surfaces and making good the surfaces including repairing the CI/GI/PVC joints of affected locations by applying TUFALO (herbal medicine ) and making good to suit the adjoining surfaces using PCC type 1:2:4, type B-0 or cement mortar 1:2 complete all as per manufacturer instructions complete all as specified and as directed. |
| 133 | Anti Termite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed |
| 134 | Anti Termite Treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed |
