|
| 1 | Demolition of cement concrete (Un-reinforced) in ground floor and paving nexc 15cm thick above or below GL complete all as specified and directed |
| 2 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in mortar complete all as specified and directed. |
| 3 | Dismentalling floors hearth or wall tilling including cement mortor bedding (but not backing) removing serviceble tiles to store and rubbish off the premises complete all as specified and directed |
| 4 | Demolition of brick work or stone masonary built in cement mortor including all quoins & jambs etc. complete all as specified and directed |
| 5 | Taking down cement plaster of any description on brick work or stone msonary wall including racking ot joints hacking for key scrubbing down with water etc. complete all as specified and directed |
| 6 | Taking down chowkhats or frames with shutters (without taking off shutter from frames) of any sizes nexc 1.5 Sqm complete all as specified and directed. |
| 7 | All as item No. 06.00 mentioned here-in-before but exc 1.5 Sqm and nexc 4.0 Sqm each. |
| 8 | Taking up or down steel tubing 20mm dia and connection complete all as specified and directed |
| 9 | Taking up or down steel tubing 40mm dia and connection complete all as specified and directed |
| 10 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 11 | Dismantling Plain or Corrugated Steel Sheeting any gauge, thickness, including nainital or similar roof coverings/sunshade, complete all as specified and as directed. |
| 12 | Dismantling AC Corrugated Sheets as in Roofing including Ridge or Similar Pattern Roof Coverings, complete all as specified and as directed. |
| 13 | Dismantling of Wall and Ceiling Board (Fibre, Pulp, Insulation etc.) or Insulation Board/Slab /Blankets, any thickness including Cover Fillets, complete all as specified and as directed. |
| 14 | Taking down unserviceable PVC (SWR) Pipes & Fittings of any size or pattern and in any Position (Measured overall as fixed along the Centre Line over the Fittings and Accessories), complete all as specified and as directed. |
| 15 | S&F Roof trusses (framed) , trussed , purlines, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or Flat section) including distance pieces , cleats etc Fe-410W (Gde E-250 Quality `A\" complete all as specifed and directed. |
| 16 | M&L Mild Steel Flat Iron 25 x 3 mm, as in Holdfast for Door, Window Frames or Chowkats etc., cut to length or drilled hole and fixed with Screw, etc., grade of Steel conforming to Fe-290 Gde E-165, complete all as specified and as directed. |
| 17 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing completeFe 410-0 W Gde-E-250 quality-A complete all as specified and directed. |
| 18 | M&L Mild Steel Plain Black Sheet 1.6mm thick in Hearths, covering to Door Shutters, covering to steel gates, etc. cut to size edges beaded if directed, holes punched including round headed Screws Clout screwsincluding bending, turning up, mitred angles, stopped ends, outlets, etc. as required, as in repair complete all as specified and as directed. |
| 19 | S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw complete all as specified and directed |
| 20 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in cover sheet for crumple section, fixed with brass screw complete all as specified and directed |
| 21 | S&F Pre-painted galvaS&F0.71mm thick Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing(length and girth as fixed)., complete all as specified and as directed. |
| 22 | M&L for Non Asbestos fiber cement Corrugated /Semi-Corrugated Sheets 6.0mm thick provides high impact resistance, sound and thermal insulation as in Roof Covering fixed with L–type or J–type Cranked Hook Bolts with Washers, etc. and fixed, complete all as specified and as directed. |
| 23 | Fixing onlyold serviceableCement Corrugated,Semi-Corrugated Sheets 6.0mm thickheets obtained from dismantling itemas in Roof Covering fixed with L–type or J–type Cranked Hook Bolts with Washers, etc. and fixed, complete all as specified and as directed. |
| 24 | S&F Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame including 5 mm thick PVC sheet fillet of width 35mm for wall Paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed. |
| 25 | M&L False ceiling with \"E\" board \"Classic\" , reinforced, designer series, board with HPSC of size 600 mm x 600 mm x 4 mm thick fixed on aluminium powder coated snap grid to support the boards/tiles with aluminium anodised main \"T\" section 36mm x 25mm x 1.40mm cross tee 23.50mm x 23.50mm x 1.40mm thick and aluminium angle 25mm x 25mm x 1.40mm as on edges/sides including hanging arrangements with 6mm dia GI hooks and clampand applying two coats of oil bound distemper over a coat of alkali resistant primer on exposed surfaces complete all as specified and as directed. |
| 26 | M&L in repair pre laminated particle board 9.0 mm thick exterior grade pre laminted both side with decorative choice lamination & other side balancing white laminated fixed with screws to timber or aluminum framed work complete all as specified and as directed. |
| 27 | M&L for providing cement concrete type B-0 (Using 12.50mm graded stone aggregate) as in padding and benching & filleting all as specified and directed. |
| 28 | M&L for 10mm thick screed bed or bedding over roof surfaces when concrete is still green with and including WPC in cement mortar 1:3 complete all as specified and directed |
| 29 | Preparation of plastered surfaces of roof and laying 3mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proofing membrane, black finished reinforced with non woven polyester matt laying over a coat of bituminous primer @ 0.40 Ltr / Sqm and two coats of Bitumen based UV reflective paint with aluminium finish over APP membrane. The membrane shall be laid using butane torch and sealing all joints etc all as specified and directed. |
| 30 | M&L Brick work with fly ash bricks designation 75 (kgf/cm2) straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed. |
| 31 | M&L Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed. |
| 32 | M&L rendering 15mm thick in CM (1:6) on other than fair faces of brick work or concrete surfaces even & smoth without using extra cement complete all as specified and directed |
| 33 | M&L rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces in two layer of 10+5mm and finished the surfaces even and fair without using extra cementand using water proofing compound of top layer of 05mm thick as per manufacturer instruction complete all as specified and directed |
| 34 | M&L rendering 5mm thick in CM (1:3) as in ceiling surfaces even & smoth without using extra cement complete all as specified and directed |
| 35 | Supply only liquid water proffing compound as required |
| 36 | S&F for 20mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 37 | S&F for 25mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 38 | M&L Cement Concretetype D2(1:4:8) using 40mm graded crushed stone aggregate 75mm thick as in sub base of floor surface even and rough to receive the topping layer, complete all as specified and as directed. |
| 39 | M&L 75mm thick PCC (1:3:6) type C-2 (Using 40mm graded stone aggregate) as in plinth protection laid in panels, finish the top surfaces even and smooth without using extra cement complete all as specified and directedNote:- Construction joints will be provided at interval of 2.5m length and filled with bitumen 80/20 mix with sand in ratio of 1:3 and cost of the same shall be deemed included in quoted rate |
| 40 | M&L 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in of floor,finish even and faircomplete all as specified. |
| 41 | M&L joint free non skid ceramic coloured tiles 8-10mm thick (square/rectangular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm in floor set and jointed in in neat cement slurry and pointed in cloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed |
| 42 | All as item No. 41.00 here in before but in skirting with and including 10mm thick rendering on fair faces of brickwork in CM 1:4 complete all as specified and directed. |
| 43 | M&L joint free non skid ceramic coloured tiles 8-10mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm in floor set and jointed in in neat cement slurry and pointed in cloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed |
| 44 | All as item No. 43.00 here in before but in skirting with and including 10mm thick rendering on fair faces of brickwork in CM 1:4 complete all as specified and directed. |
| 45 | M&L glazed ceramic coloured tiles 450x300x6-7mmin vertical surfaces set and jointed in in neat cement slurry and pointed in cloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed |
| 46 | S&F Machine cut kota stone slab flooring 20-25mm thick (size 550mmx550mm) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite finish polishing complete over 20mm thick 1:6cement mortar screed bed complete all as specified and as directed. |
| 47 | S&F Machine cut kota stone slab flooring 20-25mm thickon Vertical Surfaces such as Skirting, Dados, Risers to Steps, etc., Set Pillar and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tilesincluding rubbing and polishing complete over 20mm thick 1:4cement mortar screed bed complete all as specified and as directed. |
| 48 | M&L Pre polished Chequered cement concrete tiles of size 300mm x300mm x25mm thick, with grey cement and no pigment, jointed in neat cemnt slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6complete all as specified and as directed. |
| 49 | M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade over 50 mm sand cushion over rammed earth including dismantling old paver block for reuse complete all as specified and as directed. |
| 50 | Labour only for fixingMachine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade over 50 mm sand cushion over rammed earth complete all as specified and as directed. |
| 51 | S&F Steel window with side hung shutter including projection type hinges with steel handles, and steel peg stay with glazing bars dovetailed or welded incl taking out old window complete all as specified. |
| 52 | S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and directed. |
| 53 | S&F for Factory Made Solid PVC Moulded Door Shutter With Wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site complete all as specified and directed. |
| 54 | S&F Powder coated Aluminium anodised doors, windows, partitions and ventilators using aluminium sections of size and type approved by Engineer-in-Charge including jointing cleats,snap beadingetc, completeallas specified and as directed. |
| 55 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing powder coated aluminium handle, tower bolt, door stopper as required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed of Engineer-in-charge |
| 56 | M&L 1.50mm thick power coated aluminium , three track sliding window with three nosshutters made ofaluminium section as per drawing no CWE/KOL/TD-33 of section no 1F-1F including necessary jointing cleats, glazing clips, rubber neoprene packing, roller,locking arrangement, handles 2 Nos , anodised aluminium snap beading screws etc.includingtinted glass with sheet glass 4.80mm thick , pin head type and glazing in squaresexc 0.5 sq. M in each pane and Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm Complete all as specified and as directed.Note Nos :- (i) All window memberincluding fitting & fixture i.eframe, track, shutter frame, etc shall be deem toincluded quoted rate. Only measure opening size of window. |
| 57 | S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 58 | Hacking out old broken glass any thickness size quality or description from metal frame including punching or drilling out old glazing pins/springs clips complete all as specified. |
| 59 | S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in square nexc 0.5 Sqm each pane. |
| 60 | S&F 4mm thick frosted glass panes and glazing with oil putty in square nexc 0.5 Sqm each pane complete all as specified. |
| 61 | S&F 100mm Butt hinges, extruded brass, with brass hinge pin, bright polished, complete all as specified and directed |
| 62 | S&F Aluminium anodised, barrel tower bolts of extruded section 200mm longcompleteall as specified and directed |
| 63 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy of 300mm long complete all as specified and directed |
| 64 | S&F Extruded aluminium alloy handles, fabricated type, anodised 150mm long complete all as specified and directed |
| 65 | S&F Double action floor springhydraulically regulated, made up of minimum 1.25mm thick aluminiun alloy sheet foundation box, main body with stainless steel cover ,governing piovet made of brass ,other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 66 | S&F in repair Double action floor springhydraulically regulated, made up of minimum 1.25mm thick aluminiun alloy sheet foundation box, main body with stainless steel cover ,governing piovet made of brass ,other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 67 | S & F in repair for brass chromium plated long body bib cock with Wall Flange for 15 mm bore pipe complete all as specified and directed. |
| 68 | S & F in repair for brass chromium plated two in one tap with Wall Flange screwed for 15 mm bore pipe complete all as specified and directed |
| 69 | S & F in repair for brass chromium plated Pillar Tap screwed for 15 mm bore pipe complete all as specified and directed |
| 70 | S & F in repair for 15mm bore brass chromium plated Angular Valve with Wall Flange complete all as specified and directed. |
| 71 | S & F in repair for 15mm bore brass chromium plated 2 Way Angular Valve with Wall Flange complete all as specified and directed. |
| 72 | S & F in repair for chromium plated Health faucet with 8mm Dia, 1.2 Meter long flexible tube and wall hook with N.R.V (Back Flow Preventer) |
| 73 | S & F in repair for Plastic water closet seat, in any coloure as directed closed pattern with flat/recessed bottom, and cover and mild steel chromium plated or aluminised hinging device for pedestal pan complete all as specified and colour as directed. |
| 74 | M&L in repairs for leaking water in brass/CP Wall Mixer, basin mixer, sink mixer of any make/ description/size in any position by replacing the brass spindle & washer, tightening of fittings etc ,also removing air lock, blockage in water pipe line & make the all system fully functional to the entire satisfaction of Engr-in-Charge complete all as specified and directed. |
| 75 | S&F Mirror Bevelled Edge 600x450mm, Selected quality Glass, mounted on 6.0mm thick AC Building Board or Commercial Ply-wood and fixed to Wooden Plugs with Chro-mium Plated Brass Screws and Cup Washers including Taking down unserviceable Mirror, complete all as specified and as directed. |
| 76 | Supply and fixing in repair Vitreous China wash down water closet pan including P or S trap (pedestal pattern), white (excluding flushing cistern and flush pipe) including plastic water closet seat, black colour , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device and wash down water closet complete all as specified and as directed. |
| 77 | S&F in repair vitreous china wash hand basin white of size 550 x 400mm excluding taps but including 32mm PTMT waste coupling (excluding 32mm waste pipe) complete all as specified and directed. |
| 78 | S&F in repair PVC flusing cistern low level 10 Ltr capacity of approved make including fixing of brackets connection to WC with CI brackets and making good disturbed area complete all as directed. |
| 79 | S&F in repair PVC connection 15mm size with PTMT nut of length 600mm complete all as specified and directed |
| 80 | S&F Rotational Moulded Polyethylene (HDPE) Water Storage Tank 500 Litre Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I including provision of 25mm x 100mm GI nippples with check nuts for inlet, outlet wash and overflow pipe includingPTMT Ball Valve 20mm dia having mini -mum weight 210 Grams, high pressure with epoxy coated Aluminium Rod and high density Plastic Ball and Lowering of old/unserviceable Water Storage Tank of any description, complete all as specified and as directed. |
| 81 | M&L for preparation of old surfaces of wood or wood based materials of any descriptionand applying one coat of synthetic enamel paint over 10 Cm width or girth complete all as specified. |
| 82 | M&L for preparation of new surfaces of Steel and Steel based materials of any descriptions not otherwise described over 10Cm width or girth & applying two coat of synthetic enamel paint over a coat of red oxide on steel surfaces complete all as specified. |
| 83 | M&L for preparation of old surfaces of steel or steel based materials of any descriptionand applying one coat of synthetic enamel paint over 10 Cm width or girth complete all as specified. |
| 84 | M&L Preparing new Surfaces of Ceilng and applying Three Coats of White Wash, complete all as specified and as directed. |
| 85 | Preparing old decorative Surfaces of walls and applying one Coat of cement base paint complete all as specified and as directed. |
| 86 | M&L preparing newly plastered surfaces and applying 2 coat of oil bound distemper over a coat of primer includingtwo coat of white cement based putty(approx 2mm thick) including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed. |
| 87 | M&L preparing old decorated surfaces and applying one coat of oil bound distemper including white cement based putty as per requirement to fill up crack etc complete all as specified and directed. |
| 88 | M&L Complete removal of existing Treatment of old decorated Surfaces of Walls andapplying Two Coats of DistemperOil Emulsionover a coat of primer andapplied over 1.5mm thick average water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed. |
| 89 | M&L for preparing of existing old surfaces andfor applying one coat of 100% Premium acrylic emulsion paint having VOC lessthan 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirtresistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqmcomplete all as specified & directed.Note :-The rates includes for use of all scaffolding, treatles, ladders, cradles, etc, necessary for execution of work and protection measures |
| 90 | M&L preparing newly plastered surfaces and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified & directed. |
| 91 | S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed |
| 92 | M&L for cutting down plants / trees of girth not exc 25 cm & area not exe 01Sqmeach from roof tops /sides of external walls of buildings, chajja, wall junctions, junctions of of rain water / soil /waste vent pipes including taking out roots entered in wall/slab surfaces and making good the surfaces including repairing the CI/GI/PVC joints of affected locations by applying TUFALO (herbal medicine ) and making good to suit the adjoining surfaces using PCC type 1:2:4, type B-0 or cement mortar 1:2 complete all as per manufacturer instructions complete all as specified and as directed. |