|
| 1 | M&L for Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, n exc 10 Sqm on plan and n exc 1.5m in depth and getting out any type of soil complete all as specified and directed by Engr-in-charge. |
| 2 | M&L for Cement concrete (1:4:8) type D-2 by using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed by Engr-in-charge. |
| 3 | M&L for brick with sub class \"B\" bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engr-in-charge. |
| 4 | M&L for 15mm thick rendering in cement mortar 1:4 (mixed with WPC @ 2% by weight of cement) to brick/concrete wall and roof surfaces finished even & smooth (without using extra cement) with water proofing compound at the rate of 3% by weight of cement or as per the manufacturer’s instructions complete all as specified and directed by Engr-in-charge. Note: WPC shall be measured and paid for separately |
| 5 | M&L for preparation of new plastered surface/ old surfaces of walls and applying two coat of exterior weather proof water base emulsion paint (APEX) of any color complete all as specified and directed by Engr-in-charge. Note:- Quoted rate shall be deemed to be included for work in buildings/ structure up to 10 mtr height complete all as specified and directed by Engr-in-charge. |
| 6 | Returning, filing in, excavated soil including spreading, levelling, watering and well rammingin layers not exceeding 25cm etc complete all as specified and directed by Engr-in-charge. |
| 7 | Removingexcavated materials n. exc. 50 m from camp area and depositing were directed at a level n exc 1.5 mtr above the starting point complete all as specified and directed. |
| 8 | M&L for formwork to sides and soffits of floor beams, roof beams , beam haunchings girders, lintels, cantilevers etc to plain surface complete all as specified and directed by Engr-in-charge. |
| 9 | S&F TMT steel bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) complete all as specified and directed by Engr-in-charge. |
| 10 | S&F TMT steel bars 5mm dia and over, up to and including 10mm dia in stirrups spacers and binders all as specified and directed by Engr-in-charge. |
| 11 | M&L for RCC (1:2:4) cement concrete in beams, cantilevers, bressumers, lintels over 1.50 m span all as specified and directed by Engr-in-charge. |
| 12 | M&L for two coats of synthetic enamel paint on new steel surfaces over one coat of red oxide primerover 10cm width of grith including preparation of surfaces complete all as specified and directed by Engr-in-charge. |
| 13 | S&F Rooftrusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410-W (Gde E- 250) quality A complete all as specified and directed by Engr-in-charge. |
| 14 | S&F Galvanised mild steel plain wire all 4mm thick complete all as specified and directed by Engr-in-charge. |
| 15 | Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed by Engr-in-charge. |
| 16 | Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed by Engr-in-charge. |
| 17 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed by Engr-in-charge. |
| 18 | S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C\" channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. |
| 19 | S&Ffixedgalvanized mild steel wire cloth 0.56 mm nominal dia of wire & average width of aperture 1.18mm & fixed with tinned tacks or galvanized wire staplesin door and steel windowcomplete all as specified and directed by Engr-in-charge. |
| 20 | S&F 100 mm size butt hinges medium weight colled rolled mild steel complete all as specified and directed by Engineer-in-Charge. |
| 21 | S&F 150 mm long Mild steel barrel tower blots, stove enamelled black, with bright bolt and fixed complete all as specified and directed by Engr-in-charge. |
| 22 | S&F 150mm MS pressed handles, oval type, stove enameled black complete all as specified and directed by Engr-in-charge. |
| 23 | S&F 300mm long mild steel sliding door bolts, plate type, stove enameled black with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts, 04 on bolt plate and 02 on staple plate and fix complete all as specified and directed by Engr-in-charge. |
| 24 | S&F 125 mm size aluminium handles, cast type anodised completed all as specified and directed. |
| 25 | S&F 125 mm long Aluminium tower blots, stove enamelled black, with bright bolt and fixed complete all as specified and directed by Engr-in-charge. |
| 26 | S&F in repair 300mm size ordinary mild steel, rat tailed rod pattern spring including roller and roller platewelded to mild steel frame fixed complete all as specified and directed by Engr-in-charge. |
| 27 | S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor, overall length of cover plate 140 mm, complete all as specified and directed by Engr-in-charge. |
| 28 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-charge. |
| 29 | Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness below or above ground leveland removal all rubbish material outside of defence Land complete all as specified and directed by Engr-in-charge. |
| 30 | M&L for 10 mm thick rendering in cement mortar 1:4 to stone masonry wall surfaces or on other than fair faces of brick wall surfaces finished fair & even without using extra cement for fixing tiles etc complete all as specified and directed by Engr-in-charge. |
| 31 | M&L for 450x350x7/350 x 250 x 7mm thick glazed ceramic coloured tiles as in vertical surfaces set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed |
| 32 | M&L for 25 mm thick PCC 1:2:4 type B-1, using 25 mm graded stone aggregate as in floors, surfaces finished fair and even complete all as specified and directed by Engr-in-charge. |
| 33 | M&L for screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed by Engr-in-charge. |
| 34 | M&L for non-skid ceramictiles 7 to 8mm thick (square / rectangular ) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match with colouredtiles complete all as specified and directed by Engineer-in-Charge. |
| 35 | M&L for Vitrified ceramic light shade coloured tiles 10mm thick area of each tiles not exc 0.36 sqm , in floor etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match the shade of the tile complete all as specified and directed by Engineer-in-Charge. |
| 36 | Taking up or down15 mm steel tubingand connections including cleaning for refixing or removal complete all as specified and directed by Engr-in-Charge |
| 37 | Taking up or down 20 mm steel tubingand connections including cleaning for refixing or removal complete all as specified and directed by Engr-in-Charge |
| 38 | S&F15 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge |
| 39 | S&F 20 mm dia steel water tubing, galvanized, medium grade, with all fittings,fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge |
| 40 | S&F in repair Vitreous Chinawash down water closet pan (pedestal pattern) white with \"P\" or \"S\" Trap front or back inlet fixing bolts, PVC seat coverclosed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and making all necessary connection complete all as specified and directed by Engr-in-charge. |
| 41 | S&F in repair vitreous china squatting pan ORRISA pattern, size 580x440mm white, with integral foot rest including provn of concrete bedding and connection to trap and flushing pipe anti syphonage pipe etc incl making good to floor complete all as specified and directed by Engr-in-charge. |
| 42 | S&F in repair PVC valve less symphonic action type, flushing cistern, low level, white of capacity 10 ltrs with inlet , ball valve, float and handle including brackets complete all as specified and directed by Engr-in-charge. |
| 43 | S&F chromium plated brass tubular towel rail 20 mm dia, D type for wash hand basin centre holed fixed to iron pipe complete all as specified and directed by Engr-in-charge. |
| 44 | S&F in repair of 15mm dia bore concealed stop valves cast copper alloy chromium plated fancy type with long shank & cup (concealed type) complete all as specified and as directed. |
| 45 | S&F in repair 15mm bore angle valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed by Engr-in-charge. |
| 46 | S&F in repair 15 mm diastop cock fancy type, chromium plated with long shank and cup (conncelaed type) for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-charge. |
| 47 | S&F in repair bib taps 15mm bore cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or forunion complete all as specified and directed by Engr-in-charge. |
| 48 | S&F pillar taps (fancy type), of 15 mm dia, cast copper alloy, with capstan heads, with chromium plated, screwed down high pressure with or without lettered \"hot\" or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge. |
| 49 | S&F in repairs Soap dish, Stainless steel, embedded in the wall approximate size 160x160x90mm complete all as specified and directed by Engr-in-charge. |
| 50 | S&F in repair shower rose 125 mm size brass chromium plated withswivel joints including fixing steel pipe or unions complete all as specified and directed by Engr-in-charge. |
| 51 | S&F grating round 140 mm size of PTMT. (Minimum weight 50gms) complete all as specified and directed by Engr-in-charge. |
| 52 | S&F 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed by Engr-in-charge. |
| 53 | Dismantling of 100mm bore cast iron drain pipe alongwith fittings and accessoriesjointed in cement mortar and taking out from walls, floors or fromtrenches, if required complete all as specified and directed by Engr-in-charge. |
| 54 | Dismantling of 75mm bore cast iron drain pipe alongwith fittings and accessoriesjointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed by Engr-in-charge. |
| 55 | S&F PVC (SWR) pipes 110 mm Bore pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed |
| 56 | S&F PVC (SWR) pipes 75 mm Bore pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed |
| 57 | S&F PVC (SWR) 110mm bore bends anyradiuswith cement solvent in trenches or in floors complete all as specified and directed by Engr-in-charge. |
| 58 | S&F PVC (SWR) 75mm bore bends any radius with cement solvent in trenches or in floors complete all as specified and directed |
| 59 | S&F PVC (SWR)floor trap 75mm dia outlet plain with grating including jointing with solvent cement including jointing to waste pipe fixed in cement concrete 1:2:4, typeB-1 complete all as specified and directed by Engr-in-charge. |
| 60 | S&F PVC (SWR) branch piece single 75 mm bore single equal and unequal laid in trenches or in floors complete all as specified and directed |
| 61 | S&F PVC (SWR) branch piece 110 mm bore double equal and unequal laid in trenches or in floors complete all as specified and directed |
| 62 | S&F PVC (SWR) 75 mm bore junction single T equal and unequal laid in trenches or in floors fix with pipe with solvent cement complete all as specified and directed |
| 63 | S&F PVC (SWR) 110 mm bore junction single T equal and unequal laid in trenches or in floors fix with pipe with solvent cement complete all as specified and directed |
| 64 | S&F PVC (SWR) reducer 100mm laid in floor and wall complete all as specified and directed by Engr-in-charge. |
| 65 | S&F PVC (SWR) Gully trap 125X110mm bore setting and jointing with solvent cement complete all as specified and directed |
| 66 | S&F PVC (SWR) vent cowl 75mm bore complete all as specified and directed |
| 67 | Dismantling wrought iron or mild steel work of any description complete all as specified and directed by Engr-in-charge. |
| 68 | S&F 7 mm thick aluminium grill of make \"Deco grill DG-104 model fitted in to suitable aluminium channel and fixed to window / ventilators including channel complete all as directed by Engineer-in-charge. |
| 69 | S&F health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed by Engr-in-charge. |
| 70 | S&F double rebated, Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 65x 125 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives ( max toxicity index of 12 for 100 gms) fabricated with metre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr incharge. Note: For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e. depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. |
| 71 | S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 50x 100 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (max toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr incharge. Note: For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. |
| 72 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in- Charge. (Note: stainless steel butt hinges shall be paid separately under relevant item). |
| 73 | S&F Providing 30mm thick FACTORY-MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (Confirming as per IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. SS butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through Other hardware should be fixed with 19*6 mm size steel screws etc. complete as per direction of Engineer-in-charge, manufacturer\"s specification & drawings.” Note: Fixture/fittings shall be measured & paid under relevant item |
| 74 | S&F Stainless steel 304 grade dash fasteners as in hold fast min length should not less than 125 mm of dia 12mm complete all as specified and as directed. |
| 75 | S&Ffactory made UPVC any colour fully fixed glazedwindow/ventilatormade of (small series) frame 47 x 50mm mullion 47 x 68mm both having wall thickness of 1.9 + 0.20mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm) comprising of UPVC multi chambered frame and mullion (wherever required) extruded profile duly reinforced with 1.60 +0.20mm thick galvanised mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless screw etc. Profile of frame shall be miterd cut and fusion welded at all corners, mullion (if reqd) shall be also fusion welded including 5mm thick toughened glass drilling holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of reqd size and approval quality, all complete as per approved drg and direction of Engr in charge. Note: For UPVC frame, sash and mullion extruded profiles, minus 5% tolerance in dimension i.e. depth and width of profile dimension in higher side shall be acceptable but no extra payment on this account shall be made three track complete all as per specified and directed by Engineer in charge. |
| 76 | M&L for 100 mm thick PCC (1:4:8) type D2 by using 40mm graded stone aggregate as in sub base complete all as specified and directed by Engr-in-charge. |
| 77 | M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in-charge. |
| 78 | M&L for Machine Pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS- 15658-2006 of 60 mm thickness M-35 grade complete all as specified and directed by Engr-in-charge. |
| 79 | S&F vitreous China wash hand basin, white, flat back size 550 x 400mm including 15mm dia, 450 mm long HDPE PVC connection, 32 mm dia waste coupling and 32mm bore Waste coupling fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red leadcement including CI brackets complete all as specified and directed by Engr-in-charge. |
| 80 | S&F 20mm bore stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed by Engr-in-charge. |
| 81 | M&L for preparing new/old plastrered/concrete surfaces of ceiling and applying two coat of distemper oil emulsion (Washable oil bound distemper) on ceiling including cornices, plaster complete all as specified & directed. |
| 82 | M&L for preparing newly/old plastered surfaces and applying applying two coats of distemper with distemper oil emulsion white or tinted over and including one coat of 1 to 3 mm thick wall care puttycomplete all as specified and directed by Engineer in charge. |
| 83 | S&F Figured glass (Frosted Glass), 4mm thick pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed by Engineer in charge. |
| 84 | S&F 20 mm dia curtain rails, MS chromium plated with fixing brackets, top rollers etc complete all as specified and directed by Engr-in-charge. |
| 85 | M&L for 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr-in-charge. |
| 86 | Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness below or above ground leveland removal all rubbish material outside of defence Land complete all as specified and directed by Engineer in charge. |
| 87 | M&L for 75mm thick cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in plinth protection finishing the cement concrete surface even and smooth without using extra cement all as per specified and directed by Engineer in charge. |
| 88 | S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engr-in-charge. |
| 89 | S&F 15mm Brass CP Mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed by Engr-in-charge. |
| 90 | Taking down carefully aluminium/copper point wiring on batten or in PVC conduit or in MS conduit with GI earth wire etc (for light, fan, socket or power) complete, including fixture and fitting such as switches, ceiling Roses, pendants, regulators, sockets, light fitting etc. removing materials to storefor keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making goodthe disturbedsurfaces of walls, Floors, ceilings etc. complete all as specified and directed by Engr-in-charge. |
| 91 | Taking down carefully existing wooden board, Main switch, MCB DB boxes with MCBs, sheet metal boxes, cut out, etc of any size any capacity from boards complete and making good the disturbed surfaces of walls complete all as specified and directed by Engr-in-charge. |
| 92 | Taking down carefully sub main wiring of size including batten and making good disturbed surface of wall complete all as specified and directed by Engr-in-charge. |
| 93 | M&L complete for wiring with cable of size 1.5 sqmm single core copper multistrand conductor including continuous earth wire, using cable FRLS insulated(unsheathed) 1100 volts grade conforming to IS-694 drawn in to and including concealedpvc rigid conduit medium duty with all fittings and fixing accessoriesISI certified IS 9537 part -3 and terminated in to pressed steel metal flushboxes suitable for modular accessories and including modular cover plates with framefor mounting switches, socket regulator, brackets etc andincluding necessary cement work complete all as directed by the Engr in charge including cutting chases pinning in making good to facing and pointing in cement mortar 1:3 to the ends or cutting chases for concealed conduit point wiring and making good disturbed surface complete all as specified and directed by Engr-in-charge. Cutting not exc 4cm girth and 4cm width. for followings:- |
| 94 | One light / bell point controlled by one, one way switch |
| 95 | One fan point controlled by one, one way switch |
| 96 | One 3 pin socket out let 5 amps independent |
| 97 | One 5 pin 5 amps socket point in same board with other switches |
| 98 | One 3 pin socket out let 15 amps independent but with cable of size 4.0 sqmm in point wiring and 2.5 sqmm in continuous earth wire |
| 99 | M&L Complete for modular switch one way 6 amps 1 module complete all as specified and directed by Engr-in-charge. |
| 100 | M&L Complete For modular switch one way 16 amps 1 module complete all as specified and directed by Engr-in-charge. |
| 101 | M&L Complete for modular socket 2 in 1, 5 pin 6 amps 2 module complete all as specified and directed by Engr-in-charge. |
| 102 | M&L Complete for modular socket 2 in 1, 6 pin 6A/16 amp 2 module complete all as specified and directed by Engr-in-charge. |
| 103 | M&L complete for modular fan regulator stepped type120 watt 2 module complete all as specified and directed by Engr-in-charge. |
| 104 | M&L complete for ceiling rose surface Bakelite 3 terminal complete all as specified and directed by Engr-in-charge. |
| 105 | S&F complete modular metal flush box 3 module including cutting of chasis and making good disturbed surfaces and rate deemed to be included in quoted rate. |
| 106 | S&F complete modular metal flush box 4 module including cutting of chasis and making good disturbed surfaces and rate deemed to be included in quoted rate. |
| 107 | S&F complete modular metal flush box 6 module including cutting of chasis and making good disturbed surfaces and rate deemed to be included in quoted rate. |
| 108 | S&F complete modular white cover plate with frame 3 module complete all as specified and directed by Engr-in-charge. |
| 109 | S&F complete modular white cover plate with frame 4 module complete all as specified and directed by Engr-in-charge. |
| 110 | S&F complete modular white cover plate with frame 6 module complete all as specified and directed by Engr-in-charge. |
| 111 | M&L in replacement of exhaust fan steel body AC single Phase 230V of size 300m sweep with, blades, and frame and louvers, single phase, 230 Volt Ac 50 Hz with louver shutter / grill and connection complete all as specified and directed by Engr-in-Charge. |
| 112 | M&L complete for sub main wiring with single core copper multi strand conductor FRLS flexible insulated (unsheathed) cable of size 2 x 2.5 Sq mm and 1 x 2.5 Sq mm as in continuous earth wire drawn in to & including pvc conduit medium 25mm dia ISI marked complete with fittings and fixings accessories laid concealed complete and including necessary cement work complete all as directed by the Engr in charge including cutting chases pinning in making good to facing and pointing in cement mortar 1:3 to the ends or cutting chases for concealed conduit sub main wiring and making good disturbed surface complete all as specified and directed by Engr-in-charge. Cutting not exc 4cm girth and 4cm width. |
| 113 | All as per item No. 107 here-in-above butsize 2 X 4.0 Sqmm and 1 X 4.0 Sqmm complete all as specified and directed by Engr-in-charge. |
| 114 | All as per item No. 107 here-in-above butsize 2 X 6.0 Sqmm and 1 X 6.0 Sqmm complete all as specified and directed by Engr-in-charge. |
| 115 | M&L complete for 1 x 20 watts ( 4 feet) wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver including lamp complete all as specified and directed by Engr-in-Charge. |
| 116 | M&L complete for 1 x 10 watts ( 2 feet) wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver including lamp complete all as specified and directed by Engr-in-Charge. |
| 117 | M&L in replacement of energy saving, environmental friendly, long life exclusive innovative die-cast aluminium IP66 flood light 60 Watt with high power LEDs as light source, suitable for highlighting architectural features or retail spaces complete all as specified and directed by Engr-in-Charge. |
| 118 | S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc. including electric connections complete all as specified and directed by Engr-in-charge. |
| 119 | S&F of bed side light wall light, white colour frame of 3 Watt, 230 Volts, AC 50 Hz with wall fixing accessories including electric connections complete all as specified and directed by Engr-in-charge. |
| 120 | M&L for MCB dist board, sheet steel, phosphatised, powder printed with bus bar, neutral link, earth bar & din rail SPN dist board 12 way with 200 amps rated bus bar single door complete with necessary connection all as specified and directed by Engr-in-charge. |
| 121 | All as per item ser No. 115 above, but SPN dist board 8 way complete all as specified and directed by Engr-in-charge. |
| 122 | M&L complete for MCB single pole & neutral 240 volts, C curve-10 kA40-60 Amp complete all as specified and directed by Engr-in-charge. |
| 123 | M&L complete for MCB single pole 240 volts, C curve-10 kA 6-32 Amp complete all as specified and directed by Engr-in-charge. |
| 124 | ALMIRAH LARGE STEEL (MAP),FD/E6/MAP/18DIMENSION:-The Overall size of almirah large steel is 1900mm high, 910mm wide and 490mm deep.DESCRIPTION:- a) It shall be made of 1mm thickmild steel sheet/CRCA. All joints shall be riveted and welded thoroughly. b) The almirah shall have three shelves, one locker and one drawers with two partitions at upper half with hanging arrangement. c)The almirah shall have one spring action recessed handle 150mm long with built in locking arrangement fitted to cut out space in one shutter or normal handle 120mm long having three way locking system with proper workmanship. d) The handle of inside drawer shall be made to \"S\" Shape by bending the MS sheet of front face of drawer to full length. e) The handle of inside locker shall be provided with two way bolt locking system having duplicate flat keys Rest all specifications and dimensions are as per drg FINISH:-The almirah shall be dry powder coated in double shade (shutter in off white and outer frame in steel grey) after preparation of surface. |
| 125 | Mirror with shelvesDIMENSION: Overall size shall be 1200mm high, 600mm wide and 100mm high. DESCRIPTION: a)All wood to be used shall be 1st class hard teak wood b) It shall be made up of BWR plywood of grade - A of specified thickness as per drg in lieu of prelaminated particle board. c) 1 mm thick laminated sheet shall be pasted on all exterior surface with marine grade adhesive including 6mm thick teak wood beading shall be provided alround the edges of shutters and drawers. d) Looking mirror shall be 5 mm thick fixed inside the teak wood frame made out of 38mmx25mm section. e) 03 x glass shelves of 5mm thickness shall be fixed inside the box with glass holders as shown in drg. Rest all specifications and dimensions are as perdrg FINISH: All unlaminated plywood surface/wooden surface shall be polished in high gloss melamine polish in walnut shade after preparation of surfaces. |
| 126 | Schedule of Credit |
