Tender For Repair To Mes Installation Under Aor Of Age Br-I Of Ge (South) Mamun; 1 Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified & directed. 2 M&L for Brickwork with Fly Ash Bricks (old size), straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specifiedand directed. 3 All as per description of serial item No. 3.00 here-in-before but except bricks.Note: Old serviceable bricks retrieved by demolition shall be re-used. 4 Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. 5 Taking down cement plaster on brick walls or stone walls any description etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. 6 M&L for rendering 10 mm thick plaster in cement mortar 1:6 on brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. 7 M&L for rendering 5 mm thick plaster in cement mortar 1:3 on conrete surfaces of ceiling, finished even and smooth without using extra cement complete all as specified and directed. 8 M&L forrendering 15 mm thick plaster in cement mortar 1:4 mixed with liquid WPC @ 200 ml per 50 Kg bag of cement on brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified & directed. 9 M&L for rendering 10mm thick plaster in cement mortar 1:3 mixed with liquid WPC @ 200 ml per 50 Kg bag of cement, on concrete surfaces of fascia or edging of Chajjas, ceiling and roof proIections etc, including taking out peeled off plaster / concrete incl roughening old concrete surface and making the line in true shape and finishing the surface without using extra cement complete all as specified and directed. 10 M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc including brushing with neat cement slurry @ 3.0 Kg of cement per Sqm complete all as specified & directed. 11 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), rubbish off the debris out of MOD premises complete all as specified and directed 12 Supply and laying Non skid ceramic jointless coloured tiles,7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n. exc 0.18 sqm in floor etc.,set & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match laid over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed . 13 Supply and laying Non skid ceramic Iointless coloured tiles,7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but nexc 0.38 sqm in skirting etcset & Iointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match, laid over and including 10mm thick cement screed in cement mortar 1:4, complete all as specified and directed . 14 Supply and laying Glazed ceramic coloured tiles of size 450mmx300mm, thickness 7mm as in vertical surfaces such as skirting, dado, wall etc., set and jointed in neat cement slurry and pointed in coloured cement to match, laidover and including 10mm thick rendering in cement mortar 1:4, complete all as specified & directed. 15 M&L for Machine cut Kota stone slab flooring not less than 18-20mm thick (size of stone shall not less than 55cmx55cm), 75mm wide white marble border alround, laid over & including 20 mm thick screed base in CM 1:6, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing to yield mirror finish with machine,complete all as specified. 16 M&L for Machine cut Kota stone slab not less than 16mm thick as in riser of steps, skirting, dado and pillar laid over& including 10 mm thick screed base in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing to yield mirror finish with machine, complete all as specified. 17 M&L for coloured machine pressed precast rubber moulded concrete interlocking red/yellow) paver block of any shape and size with 6-8mm white cement layer mixed with pigment and coated with epoxy coating having high glossy finish confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, laid dry including taking out existing interlocking paver block complete all as specified and directed. 18 M&L forChequered cement concrete tile 20cmx20cmx25mm thick, set and jointedin grey cement and pointed in grey cement with pigment, laid over and including 20 mm screed bed in CM 1:4 complete all as specified and directed. 19 M&L for 50 mm thick sand as in cushion under precast concrete interlocking paver block incl watering, levelling & consolidating complete all as specified & directed. 20 M&L for75 mm thick cement concrete 1:3:6 type C-2 using 20 mm graded aggregate as in sub base of flooring finished even and rough to receive floor topping complete all as specified and directed 21 M&L for cement concrete 1:2:4 type B-1 using 12.5mm graded crushed stone aggregate as in kerbs or mud stops, rounded or chamfered on edges including necessary form work complete all as specified and directed. 22 M&L for 75mm thick Cement concrete1:3:6 type C-1, using 20mm graded aggregate) as in plinth protection and paving, laid in slope, finished even and fair incl making Ioints at every 2.5 m and at corner, joins filled with bitumen 85/25 and sand in ratio 1:2 by weightcomplete all as specified and directed. 23 M&L for 50mm thick cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in floors, finishing the surface of concrete topping even & smooth without using extra cementcomplete all as specified and directed. 24 Taking down existing roof treatment of any description incl mud phuksha or PCC padding if any (any no of layers) including removal to debries in low laying area exc 1.00 KM but n exc 2.00 KM complete all as directed. 25 S&FWire netting of stainless steel wire 0.71 mm dia with size of mesh 25mm x 25mm fixed with tinned tacks of stainless steel wire staples complete all as specified and directed. 26 M&L for cement concrete 1:1.5:3 type B-0 using 12.5 mm graded stone aggregate as in leveling course on existingroof, rounded and chamfered on edges, mixed with liquid WPC @200ml per 50Kg bag of cement,surface finished even and smooth without using extra cement complete all as spd and directed 27 M&L for APP modified roof treatment over existing non-accessible RCC roof slab / chaIIah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :-(a) Cleaning the top surface of RCC roofing properly with water complete.(b) Applying Oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface.(c) Laying of membrane not less than 3.0 mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160 Gms/Sqm using butane torch by torch application with 10 Cm side laps and 15 Cm end lap complete. (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap.(e)Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg /Sqm as prescribed by manufacture of membrane.(f)APP Membrane shall be stick inside parapet where available by chase cutting and sealed with PCC (1:2:4) type B-0complete. 28 Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spribng clips and providing and fixing new onces exc 1.5 Sqm complete all as specified and directed. 29 S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares size n.exc 0.5 sqm in each pane including hacking out old broken glass any thickness, size or quality complete in all respect as specified and directed. 30 S&F Galvanised SS wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with SS wire staples complete all as specified. 31 M&L for preparation of new wood or wood based surfaces of any descriptionover 10 cm width or girth and applying two coats of synthetic enamelpaint over a coat of pink primer complete all as specified and directed. 32 M&L for preparation of new steel sufaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint of approved shadeover one coat of red oxide primercomplete all as specified and as directed. 33 M&L for prepration of old steel surfaces of anydescription, not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paintwhite or tinted complete all as specified and directed. 34 M&L prepration of old wood or wood based surfaces of anydescription, not other wise described over 10 cm width or girth and applying one coats of synthetic enamel paint, white or tinted complete all as specified. 35 Supply only liquid water proofing compound conforming to relevant IS complete all as specified and directed. 36 Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n. exc. 1.5 Sqm each and removing from site complete all as specified and directed. 37 Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n exc. 4.00 Sqm each and removing from site complete all as specified and directed. 38 Taking down shutters of any description n exc 1 Sqm each and removing from site complete all as specified and directed. 39 Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each and removing from site complete all as specified and directed. 40 Taking down shutters of any description exc 1.00 Sqm and not exc 2.00 Sqm each and refixing in same opening (incl easening adjusting) complete all as specified & directed. 41 S&F 35mm thick 2ndclass hard wood (Sal/Hollock), glazed and skeleton shutters (factory made), open rebated and prepared to receive glass or wire gauge etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., size of members of shutters as specified in clause 8.24 (a) of SSR Part-I, complete all as specified & directed. 42 S & FFactory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm thick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note: stainless steel butt hinges and necessary S S `screws shall be paid separately. 43 S& F aluminium alloy, anodised sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded setion or cast aluminium alloy and fixed 300 mm long complete all as specified & directed. 44 S & F anodised aluminium barral tower bolt extruded section 200 mm size complete all as specified & directed. 45 S & F anodised aluminium handle cast type 125 mm size complete all as specified & directed. 46 S&FFactory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 50 X 100 MM comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugsor SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete all as specified and directed. 47 S&FFactory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 50 X 125 MM comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugsor SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete all as specified and directed. 48 S&F for floor door stopper, 140mm long, cover plate of aluminium alloy body and tongue anodised with hard drawn steel spring, fixed in floor complete all as specified and directed 49 S&F for Box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thickMS sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes will be measured and paid seperately) with side hung shutters with MS handles and MS peg stay dovetailed or welded incl 02 Nos, MS Tower bolts 150 mm long for each leaf and 8 mm square bar grill / guard bars at spacing as shown on Drg welded to MS flat iron frame work ,including other fittings ,hinges ,MS handles ,tarred hold fasts ,PCC blocks for hold fastsetc all as shown on Drg No CEPZ/TD -354/09 sheet 1/3 to 3/3 including two coat of synthetic enamel paint over one coat of red oxide zinc primer, complete all as specified and directed by Engr-in-charge. 50 M&L for Repair to Old steel window, not exc 2.00 Sqm each incl replacement of hinges, Handle, and necessary oiling, welding to shutter and chowkhat for making window in serviceable condition, Complete all as specified and directed. 51 M&L for preparation of new or previously untreated steel or iron surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed, 52 M&L for preparing of new or previously untreated surfaces of wood of any description not otherwise describedover 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. 53 S&F 300mm long MS sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and directed. 54 S&F 125mm long MS pressed handle, oval type stove enamelled black type complete all as specified and directed. 55 S&F 125mm long MS barrel tower bolt, stove enamelled black with bright bolt fixed type complete all as specified and directed. 56 Taking down existing Rolling shutter of area 15 sqm to 20 sqm each and refixing to same opening after repairing, easing and adjusting incl replacement of ball bearings, anchoring rod, gear box and crank handle, safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. 57 Supply & fixed in repair flushing cistern, 10 litre capacity, Push botton type dual flush type PVC valveless, syphonic action type,low level, white, with inlet, ball valve, float and push botton (incl brackets & flush pipe PVC 32 mm dia) 58 S&F in repair water closet white vitreous china ware Orissa pattern of size 580x440mm with integral foot rest front or back intlet incl Cast Iron P or S trap100 mm bore, provisionprovn of lime concrete bedding and making good the dismantled surface and connection to flushpipe make Hindware/Parryware/ cera complete all as specified and directed. 59 Supply and fixing factory made 18mm thick WPC (wood particle composit) sheet one side prelam sheet and other side wood nature colour for cupboard shutter of density 600 kg /Cum, bent 90°incl 100% termite/water proof, fire rertradent, Eco friendly, and finish at all edges at level for making edges lippingusing binding tape etc. Complete as per direction of Engr-in-charge, Manufacture specification.Note:-Binding tape shall be measured and paid separately. 60 S&F 0.80 mm thick PVC edge binding tape around 18 to 20 mm thick PVC shutter edge, colour as directed, fixed with adhesive complete all as specified and directed. 61 S&F 100 mm long aluminium handle casttype anodised complete all as specified and directed. 62 S&Fcontinuous (piano) hinge, mild steel, bright finish width of flaps (when open ) 40 mm all as specified and directed. 63 S&F 100mm size hasp and staple, aluminium anodisedsafety type, fixed with screws complete all as specified and directed 64 S&F Magnet ball catcher for cupboard shutter, complete all as specified and directed. 65 M&L for repair to RCC sunshades, chajjas, Balconies, bands, beams and similar RCC work at any position/ height by dismantling loose/ disintegrated portion and dubbing out with cement concrete 1:1.5:3, 40 to 100 mm thick using 6 to 12 mm graded stone aggregate to make up and finished to required shape incl provision of necessary supports if required and removing corroded reinforcement and binding new reinforcement as per site conditions and rendering with 5 mm thick in CM 1:3 and applying two coats of exterior emulsion paint over a coat of primer complete all as specified and as directed. Note: The cost of necessary scaffolding for execution of work and protective measures for upto height of double storey building as directed by Engr in charge shall be deemed included in the quoted rate and nothing extra shall be admisible on this account. 66 M&L for preparation of old plastered surfacesby scrapping down smoke soots, moulds salts and treading oil and greasy spotswith wire brush and applying one coat of white wash on Ceiling complete all as specified & directed. 67 M&L for preparation of newly/old plastered surfaces ofwalls and applying two coats of oil bound distemper, white or tinted, over and incl 1 mm thick cement based wall care putty in suitable nos of coats to receive true smooth surface complete all as specified & directed. 68 M&L for preparation of newly/old plastered surfacewallsby manual or mechanical means incl and applying two coats of Antifungal /anti algae exterior weather coat paint, white or tinted incl one coat of primer over and incl 1 mm thick cement based wall care putty in suitable nos of coats to receive true smooth surface complete all as specified & directed. 69 M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash completeall as specified and directed. 70 M&L for preparation of old plastered surfacesof walls by scrapping down smoke roots, moulds salts and treading oil and greasy spotswith wire brush and applying one coat of white washcomplete all as specified & directed. 71 M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash completeall as specified and directed. 72 Dismantling posts or struts (wood or R.C.C.) any section & Post Embedded in Natural Ground Natural ground, including taking out embedded portion and making good disturbed ground Complete all as specified and directed 73 Excavation in post holes each not exc 0.5 cum in any type of soil, getting out, returning, filling in and ramming each or broken rubble mised with each around in layers not exc 25 cm complete all as specified 74 M&L PCC 1:3:6 type C-2 (using 40mm graded aggregate) asin foundation, filling and mass concrete complete all as specified and directed. 75 S&F for mild steel posts and struts, in fencing including cutting tops to shape as directed, drilling holes notching for wire etc flat iron fillets (for securring wire mesh etc) including all necessary drilling bolting or riveting etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed. 76 S&F mild steel screw bolts machine made with hexagonal or square heads at one end and screwed the other on screwed both ends each screwed tobe fitted with washers and one hexagonal or square nut langth of boltn exc 5cm ong and11 to 15 mm dia complete all as specified and directed. 77 Fixing only in repairs chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.Note:- Supply of chain link fencin shall be measured and paid for separately. 78 Supply onlychain link fencing including line wires any mesh size and type to any type of standards rails straining bolts etc including provission of binding wire complete all as specified 79 M&L for Mild steel round bars 10 mm dia and over cut to ength, bent to shape required including cranking bending spirally for hooping for columes hooking ends binding with and, etc., and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. 80 S&F in repair Bib tap cast copper alloy,fancy type chromium plated,for 15 mm bore pipe or union, complete all as specified and directed. 81 S&F in repair angular Stop cock, cast copper alloy fancy type, chromium plated suitable15mm bore pipe or union, CP ccomplete all as specified and directed. 82 S&F in repair Plastic water closet seat cover, back closed pattern with flat bottom,and mild steel chromium plated or aluminised hinging device complete all as specified and directed. 83 S&F in repair 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling complete all all as specified and directed. 84 S&F in repair PVC connection of length 450mm with PTMT nuts suitable for 15mm pipe complete all as specified and directed. 85 S&F for Butt hinge 100 mm long, stainless steel, medium weight with SS hinges pin and fixed complete all as specified.
