Tender For Renovation And Repair Of Karatberia Kajirchak Under Banibon Gp-M.S. or W.l, ornamenta grill of approved design-----ii) Grill weighing above 10kg/sq-m uptol6kg/sq-m. lt. No.13(i)page no.1 04 M.S structural works with hollow sections (square or rectangular shape) conforming to lS: 806-1968 & lS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to lS: 816-1969 & lS: 9595 using electrodes of approved make and brand conforming to lS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all IVl.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. i) For roof truss works a) Span up to 12 Mtr Galvanised corrugated iron sheet work (excluding the supporting frame work)fitted and fixed with 1Omm dia JorL hook bolts, limpet and bitumen washersand putty complet wit 150mm end lap and one corrugationminimum side lap.(payment to be made on area of finish work(GCl sheet to be supplied by conctor) i)ln roof:- b)with 0.63mm thick sheet. P- 81,s1.no.9 125 mm thick brick work with 1st class bricks in cement morter (1:4) in qround floor. Brick work with 1st class bricks in cement mortar (1:6) b) in superstructure, ground floor Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant lS codes. A) Pakur Variety Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders, etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending top correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation, basement and upto roof of ground floor i upto 4m. i) Tor steel/mild steel I. JSW/JSPLiSHYAM/ SRMBiBMASL Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, bems, columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). a) 25mm to 30mm thick wooden shuttering as per decision and direction of Engineer-in-charge. Earth work in excavation of foundation trenches or drain in all sorls (including mixed soil but excluding laterite or sandstone) including removing spreading or stacking the spoils within a lead of 75m as directed. The item includes necessary trimming the sides of trenches, levelling and ramming the bottom bailing out water as required complete. a) Depth of excavation not exceeding l ,5m. Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150mm. lncluding watering and ramming etc. layer by layer complete. ( payment to be made on the basis of measurement of finished quantity of work) a) with earth obtained from excavation of foundation Filling in foundation or plinth by silver sand in Iayer not exceeding 150mm as directed and consolidating same by through saturation with water ramming complete including the cost of supply of sand (Paymend to be made on measurement of finished quantity) Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. Plaster (to wall, floor, ceiling, etc) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or roughening of concrete sudace, including throating, nosing and drip course, scaffolding/staging where necessary (ground floor).[excluding cost of chipping over concrete surfacel Plastering to inside wall with cement morter 1:6), 20mm thick lron socket bolt of approved quality fitted fixed complete b)100mm longxl0mm dia bolt p-141,sl.no.B,b). Artlficral stone in floor, dado, staircase, etc. with cement concrete 1:2:4) with stone chips iaid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners and including application of cement slurry before flooring works, using cement @1.75Kg / sqm all complete including all materials and la bou rs. ln sround floor. iii) 35 mm thick Removing loose scales, blisters etc. from old painted surface and thoroughly smoothening the surface to make the same suitable for receiving fresh coat of palnt. White washing including cleaning and smoothing surface throughly all floors) c) three coats (on new works only) Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly plastered or concrete surface) as per manufacturers specification In Ground floor: iii)Two coats. Page 2 of3 Wood work in door and window frarne fitted and fixed complete icluding a protective coat of painting at the contact surface ofthe frame excluding cost of concrete, iron butt hinges and lr,4.S clamps d) Sal: Local. plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. ln ground floor. (iii) 35mm thick shutters with 19mm thick panel of size 30 to a5 cm. (b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, oor and n d o d5 per d esign ea ch pa n e k. Panel shutters of d, consisting of single Z-batten shutters of door and window as per design havings tongued and groove-half lap jointed as per dlrectlon ofthe Engineer-in-Charge including fitting and fixing shutter in position, but excluding the cost of hinges and other fittings in ground floor. B) Shutter with 19mm thick planks, 19mm thick battens. iii) Sishu, Gamar, Champ, Badam, Bhola, tvlorga, Hallak. (A) Painting with best quality synthetic enamel paint of approved make and brand cluding smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (b) On steel or other metal surface: Wrth super gloss (hrgloss) - (iv) Two coats (with any shade except white) (a) Priming one coat on steel or other metal surface with synthetic bound primer of approved quality including smoothening surfaces by sand papering etc (b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces sa nd papering etc. (A) Painting with best quality synthetic ename make and brand including smoothening surface by sand papering etc includ ing using of approved putty etc. on the surface, if necessary : (a) On timber or plastered surface : With super gloss (hi-gloss) - (iv) Two I paint of approved E lect rifi catio n Sanitary & Plumbing Display Board
