Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 07-01-2026 | C3 | Date | 24-01-2026 |
| 2 | 27-12-2025 | C2 | Date | 14-01-2026 |
| 3 | 16-12-2025 | C_1 | Date | 03-01-2026 |
| Sl. No. | Item Description |
| 1 | SCHEDULE \"A\" : |
| 2 | Item No 01 : Taking down cement plaster on brick Walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water etc |
| 3 | Item No 02 : Demolition of brick work built in cement mortar incl all quoins, arches, pillar etc |
| 4 | Item No 03 : Brick work with sub class \"B\" bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6,using old size bricks all as specified. |
| 5 | Item No 04 : Brick work with sub class \"B\" bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6,using old size bricks as retrived against item no.3 here in before,all as specified. |
| 6 | Item No 05 : M&L rendering 15 mm thick in cement mortar 1:6on conc/brick surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 7 | Item No 06 : 15mm thick cement plastering in cement mortar 1:4 with WPC on fair faces of brick work or concrete surfaces finished even & fair without using extra cement complete all as specified and directed. |
| 8 | Item No 07 : 5 mm thick cement plastering in cement mortar 1:3 as on ceiling surfaces finished even and smooth without using extra cement. |
| 9 | Item No 08 : Supply only liquie water proofing compound as per manufacture instruction. |
| 10 | Item No 09 : M&L preparation of newly plastered surfaces of walls/chajja/lintel and applying two coats of exterior acrylic emulsion paint (Apex or equivalent in berger. johnson paint white or tinted) over a coat of alkali resistant primer complete as specified and directed. |
| 11 | Item No 10 : Materials & labour for prepration of newely plastered surface and finishing the surfaces of wallwith wall putty and applyingtwo coat of Oil Bound distemper over one Coat of Cement Primer of, any colour, complete all as specified & directed. |
| 12 | Item No 11 :M & L for complete removal of existing treatmentover wall and applying two coats of distemper oil emulsion over 1mm thick wall care putty complete all as directed |
| 13 | Item No 12 : M & L for complete removal of existing treatmentover wall and applying two coats of distemper oilemulsion over 1mm thick wall care puttycomplete all as directed |
| 14 | Item No 13 : M&L for complete removal of existing surface of walls of any description by washing, rubbing down and applying two coats of acrlic emulsion weather coat paint over a coat of alkali resistant primer, complete all as specified and directed. |
| 15 | Item No 14 : Preparation of old plastered or unplastered surfaces of wall and applying one coats of white wash incl.preparation of old surfacecomplete all as specified. |
| 16 | Item No 15 : Preparation of new plastered or unplastered surfaces of wall and applying three coats of white wash on ceiling surfaces complete all as specified. |
| 17 | Item No 16 : Preparation of old plastered or unplastered surfaces of ceiling and applying one coat of white wash complete all as specified. |
| 18 | Item No 17 : Taking up or down steel tubing and connections incl cleaning for refixing or removing to store yard of size 15mm bore. |
| 19 | Item No 18 : Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 20 | Item No 19 : Taking up or down steel tubing and connections incl cleaning for refixing or removing to store yard of size 20mm bore. |
| 21 | Item No 20 : Supplying and laying of 25mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 22 | Item No 21 : S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe all as specifed. |
| 23 | Item No 22 : Demolition of cement concrete unreinforced in floors , roof and pavings n. exc 15 cm thickness (below or above ground level). |
| 24 | Item No 23 : Dismantling brick tiles or terracing tiles /roof covering materialsingle layer on roofs complete all as specified |
| 25 | Item No 24 : Scarpping surfaces of roof by wire brushing and removing all loose dust and cleaning and washing down the surfaces with water complete all as directed. |
| 26 | Item No 25 : M&L for 10 mm thick plaster in cement mortor 1:3 laid over roof with integral water proofing admixture @ 200 ml per 50 kgs of cement (after the cement is cured the roof will be testd for water tightness by ponding with water for seven days of any seepage/leakage etc.) Note :- supply only water proofing compound shall be measured and paid separately. |
| 27 | Item No 26 : M&L Applying membrane on primed surface by press application method with minimum 75 mm longitudinal wise lap and 100 mm over lap on the transverse direction duly sticked using 3 mm thick APP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proofing membrane, black finished non woven polyester reinforced (wt not less than 150 grams) over applying one coat of bituminous primer @ 0.4 kg per Sqm complete all as specified and directed. |
| 28 | Item No 27 : M&L for two coats of bituminous based aluminum paint on APP membrane all as specified and directed. |
| 29 | Item No 28 : M&L for screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:4 for fixing tiles. (Note :- Screed bed shall be mixed with water proofing compound as specified and directed and shall be measured and paid separately) |
| 30 | Item No 29 : M&L for 20 mm thick machine cut & polished cement concrete tiles factory made with grey cement without pigment of size 250mm x 250 mm laid in neat cement slurry over screed bed and tiles properly laid with 3 mm wide joints filled with FEVIMATE TG of Dr Fixit or tile glue or as per manufacturer instructions complete all as specified and directed. |
| 31 | Item No 30 : PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in roof kerbs, benches and water troughs etc. including necessary moulding complete all as specified & directed. |
| 32 | Item No 31 : M&L Providing precast cement concrete Type B11:2:4 (20mm graded aggregate) set in CM 1:6 in window or door cills, lintels,bressumers, steps, quoin blocks (for use with masonry), copings, kneelers, apex stones,, columns, posts,with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match. |
| 33 | Item No 32 : M & L cement concrete Type B0 1:2:4 in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed |
| 34 | Item No 33 : Taking downchowkhats or frames of any description n exc 1.5 sqm each (without taking off shutters from the frame) |
| 35 | Item No 34 : Taking down chowkats or frame with shutters (without taking off shutters from the frames) but Exc 1.5 and n. Exc 4 Sqm each |
| 36 | Item No 35 : Taking down shutters of any description n exc 1.00 Sqm each complete. |
| 37 | Item No 36 : Taking down shutters of any description exc 1.00 and n . Exc 2 Sqm each complete. |
| 38 | Item No 37 : Refixing of shutter of any description exc 1 sqm and n exc 2 sqm in same openingcomplete. |
| 39 | Item No 38 : S&Fanodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified |
| 40 | Item No 39 : S & F Anodised aluminium windowand ventilator shutters, side hung type or two or three track type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.if use sliding tack provide all locking arrangement,rubber beading,cleat incl all fitting and fixture complete. |
| 41 | Item No 40 : S&F framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or FE 310-0 complete all as specified. |
| 42 | Item No 41 : S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n. Exc 0.5 Sqm in each pane. |
| 43 | Item No 42 : S & F 4 mm thick frosted glass pin head type and glazing with oil putty in squaresexc 0.5 Sqm in each pane etc complete all as spd and directed. |
| 44 | Item No 43 : S&F stainless steel wire cloth o.36 mm nominal dia of wire and average with of aperature 1.40 mm and fixed with stainless steel wire staples in repairs. |
| 45 | Item No 44 : S & F factory made single extruded WPC (Wood polymer composite) solid door/window/ceosetory windows & other frames/chowkhats of size 50 x 100 mm comprising of virgin PVC ploymer of K value 58-60 (suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strenght of 2200 N (Face) & 1100N (Edge), minimum compressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixede in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerence in dimension i.e. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 46 | Item No 45 : S&F factory made solidPVC Mouldeddoor shutter(with particle board core), 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on front face and 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing . |
| 47 | Item No 46 : M&L for hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming toFe -290 Gde E-165 |
| 48 | Item No 47 : M & L cement concrete type C - 1 (1:3:6) using 20 mm graded stone aggregate as in bed blocks,fillings for holdfast etc complete. |
| 49 | Item No 48 : Supply & fix second class hard wood 35m thick glazed and skeleton factory made shutter for door open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/gauze etc, size members of shutters as specified in SSR Part-I Sec 8, Clause 8.24 (a) complete all as specified and directed . |
| 50 | Item No 49 : Supply & fix 30mm thickflush shutter, solid core construction, with blockboard core and plywood face panels commercial type on both side complete all as specified and directed. |
| 51 | Item No 50 : S&F block boards 18/19mm thick gde 2 quality, interior grade, commercial type for cupboard shutter, shelf, etc complete |
| 52 | Item No 51 : S&F 12mm thick plywood grade BWR with 1.5 mm decorative laminate both side type -I complete all as specified. |
| 53 | Item No 52 : M&L Pressed steel frames of section 125 x 60 mm for doors with one or more rebates including supply andfixing lugs, hinges, lock strick plate etc complete all as specified. |
| 54 | Item No 53 : M&L Pressed steel frames of section 105 x 60 mm for doors with one or more rebates including supply andfixing lugs, hinges, lock strick plate etc complete all as specified. |
| 55 | Item No 54 : S&F Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long. |
| 56 | Item No 55 : S&F Aluminium anodised barrel tower bolts of extruded section and fixed 150 mm long. |
| 57 | Item No 56 : S&F Aluminium anodised handles of extruded section and fixed 150 mm long. |
| 58 | Item No 57 : S&F 100 mm size Butt hinges medium weight cold rolled mild steel and fixed. |
| 59 | Item No 58 : S&F 100 mm Stainless steel butt hinges, with stainless steel hinge pin,complete all as specified and directed |
| 60 | Item No 59 : S & F Magnet catcher with nuts and screw of mild steel bright finish all as specified and directed |
| 61 | Item No 60 : S & Fmild steel Drawer handle projection drop 50 mm to 65 mm on screw plate complete |
| 62 | Item No 61 : S & F Magic Eyes for doors complete |
| 63 | Item No 62 : S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixibng bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as directed. |
| 64 | Item No 63 : S&F Mild Steel 150mm, ordinary rat tail rod pattern springs,incl roller and roller plate complete. |
| 65 | Item No 64 : S & F Floor door stopper of aluminium alloy body and tongue, anodized, with hand drawn steel spring fixed in door, overall length of cover plate 150 mm |
| 66 | Item No 65 : S&F stainless steel slip on soft hinges for cabinet door of make godrej and euivalent. |
| 67 | Item No 66 : M&L preparation of new wooden or wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying tow coats of synthetic enamel paint over a coat of pink primer |
| 68 | Item No 67 : M&L for prepration of new steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer |
| 69 | Item No 68 : M&L for preparation of old wooden surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint white or tinted complete all as directed. |
| 70 | Item No 69 : M&L for preparation of old painted steel surface of any description , over 10 cm width or girth not otherwise described and applying one coat of synthitic enamel paint white or tinted all as directed. |
| 71 | Item No 70 : S & F in repairs 40 mm dia, cupboard Knobs fixed with nut, screws and washer of mild steel, bright finished |
| 72 | Item No 71 : Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as directed. |
| 73 | Item No 72 : Roughing surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust etc. |
| 74 | Item No 73 : M&L brushing neat cement slurry with 3 Kg ofcement per sqm . complete all as specified and directed. |
| 75 | Item No 74 : M&L for coloured non skid ceramic tiles, 7 to 8 mm thick, edgeless, area of each tile exc 600 x 600 mm in floors etcset and jointed in neat cement slurry and pointed in colored cementover and incl 15 mm thick screed bed orbedding layers of cement mortar 1:6 to matchShade, pattern, laying etc of tiles as directed at site complete all as specified and directed. |
| 76 | Item No 75 : All as per Item No 74 but as in Skirting with 10mm thick rendering in CM 1:4 |
| 77 | Item No 76 : M&L for 450x350x7mm thickglazed ceramic tiles colored as in dado/skirting and vertical serfaces set&jointedin neat cement slurry and pointed in colored cement 0ver and incl10 mm thick cement mortar 1:4, Shade, pattern, laying etc of tiles as directed at site complete all as specified and directed. |
| 78 | Item No 77 : M&L for 20 mm thick granite (of any type),as in cooking plateform etc set in CM 1:4 and grinding and polishing and rounding / moulding the edges complete. |
| 79 | Item No 78 : M & L for Machine cut Kota Stone slab flooring 18-20 mm thickover cement screed base laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing and nosingcomplete all as specified and directed. |
| 80 | Item No 79 : M & L for Machine cut Kota Stone slab 18-20 mm thick in riser of step,skriting,dado,and pillar and jointedwith gray cement slurry mixed with pigment to shade os slabincl rubbing and polishing and rounding to edge of stone slab complete all as specified and directed. |
| 81 | Item No 80 : Rounding to edges of stone slabs on edge such as in steps,coocking plateform and other similar situations. |
| 82 | Item No 81 : Disconnecting existing tanks setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position (Cleaning repairing, etc.measured Separately) complete all as directed. |
| 83 | Item No 82 : Dismantling water tanks capacity exc 250 ltrs & n exc 500 ltrs and removing from site complete all as specified and directed. |
| 84 | Item No 83 : Dismantling water tanks capacity exc 500 ltrs & n exc 1000 ltrs and removing from site complete all as specified and directed. |
| 85 | Item No 84 : Demolition of reinforcedcement Concrete of any description and in any position not otherwise specifically provided for |
| 86 | Item No 85 : Supply and fixingthree layer PVC tank of 500 ltr capacity including Supplied and fixed 20mm dia brass float valve assembly complete all as specified and directed. |
| 87 | Item No 86 : Rotational moulded polythene water storage tanks, double layered (Cylindrical vertical with closed top) of capacity 1000 lit, hoisted and fixed in position as in repair complete all as specified. |
| 88 | Item No 87 : S & F Ball brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to dia of pipe 20mm as in repairs, complete all as specified and directed. |
| 89 | Item No 88 : M & L for repairing broken edges of chajja\"s, roof projection, Fascias etc . In small widths/depths ( exposed area exc 0.05 sqm but n exc 0.10 Sqm ) by breaking the cracked/loose portion and filling with Cement Mortar / Plain Cement Concrete 1:2:4 ,Type B-0 , using 12.5 mm Crushed stone aggregates , over GI wire mesh, giving a coat of anti corrosive paint to exposed Reinforcement and using coat of anti corrosive paint to exposed Reinforcement and using chemical for bonding old and new concrete/plaster and finishing with CM 1:3 plastering, incl 2 coats of white wash to match the exisitng surfaces incl removing debris , necessary scaffolding , etc all as specified and directed. (Note : Reinforcement if any provided shall be measured and paid separately) |
| 90 | Item No 89 : All as per ser item No 88 above herein beforebut exposed area exc0.10 Sqm but not exc 0.16 Sqm |
| 91 | Item No 90 : M&L forrepair and rendering 10mm thickin cm 1 :3on chajjas, facia, roof projection, column sides, beam bottom and sides including throating after removing cracked plaster and concrete includingcleaning of viisible reinforcementandtreating with cement slurry also necessary repair to cracked concreteif any with cement concrete1:2:4 Type B-0 using 12.5mm gradedaggregateincluding necessary scafolding work for double/single storey bldgs all as directed . |
| 92 | Item No 91 : Mild steel TMT bars 10 mm dia and over as in reinforcement, cut to length, bent to shape required, incl cranking bending spirally for hooping for columns and binding with MS wire (annealed) not less than 0.9 mm dia or securing with clips. |
| 93 | Item No 92 : M&L for mild steel 6 - 8mm dia TMT bars bent to shape required, including cranking,bending and binding with mild steel annealed wire not less than 0.9mm dia complete all as specified and directed. |
| 94 | Item No 93 :S&F of white/colour PVC Cabinet Mirror of Size 350 mm X450 mm of approved make |
| 95 | Item No 94 : S & F Viterous china wash basin,white, flat back, of size 630x450mm with CP waste coupling,32 mm of PTMT (half or full threaded),20 mm low density polythylene (CDPE) of pressure rating 6kg/cmsq fixed to floor and including fixing brackets, complete fixed as in repairs suitable for pipe of bore 15mm. |
| 96 | Item No 95 : S&F PVC waste pipe 32 mm dia and 900 mm long for WHB and Kitchen sink. |
| 97 | Item No 96 : S & F Brass chromium plated tubular towel rail, 20mm dia, D Type, and 600mm long with brackets fixed complete with brass chromium plated screws. |
| 98 | Item No 97 : S&F in repair Soap dish, chromium plated with fittings complete all as specified & directed. |
| 99 | Item No 98 : S & F Chromium plated mixture cock for wash hand basin for hot and cold water of copper alloy with long shank inlets suitable for 15mm bore connections complete all as specified and directed. |
| 100 | Item No 99 : S&F in repair 0.63 mm thick kitchen plate rack made of stainless steel 750x 600 x 250 mm size fixing with wooden plug with suitable size of screws complete all as specified. |
| 101 | Item No 100 : S&F in repair 15mm bore bib tap long body cast copper alloy CP fancy type with capstan head handle,screweddown, screwed for brass ferrule and fixed |
| 102 | Item No 101 : S & F 15 mm bore chromium plated nozzel for RO connection complete |
| 103 | Item No 102 : Supply and fixing in repairs Brass CP mixer forbasin mixing for hot and cold water screwed down for iron pipe of 15 mm bore, complete all as specified and directed |
| 104 | Item No 103 : S&F in repair Vitreous china wash down water closet pan ( pedestal pattern), white (excluding fixing bolt, flushing cistern and flush pipe) but including P or S trap& incl sheet cover ofwhite colour all as directed and specified. |
| 105 | Item No 104 : S&F in repair vitreous china squatting pan, Orrissa pattern size 580x440mm white with PVC \"P\" or \"S\" trap with integral foot rest of any pattern incl connection to trap & to flushing pipe, antisyphonage pipe etc making good to floor complete. |
| 106 | Item No 105 : S &Fin repair chromium plated health faucet for EWC all as specified and directed by EIC |
| 107 | Item No 106 : Supply and fixing in repairPVC valveless syphonic action low level flushing cistern of 10 Ltr capacity including flushing pipe bend etc. complete all as specified and directed. |
| 108 | Item No 107 :S&F Stain less steel sink with drainage board made out of 1 mm thick stainless steel sheet1 mm thick, kitchen type, with plug,washer and waste, incl fixing with cantilver brackets and connecting union to pipe over all size 915x460mm, bowl size 410x 330 x 160mm. all as specified. |
| 109 | Item No 108 : S&F in repairs shower rosebrass cromium plated with swivel joints of size 75 mm dia cast copper alloy CP, fancy type with CP neck 6\" long made to shape comptete. |
| 110 | Item No 109 : S&F Mild steel Powder coatedpipes 32 mm dia with wall thickness 16 gauge, with fixing brackets stops, roller etc. in curtain rods fixed in repairs complete all as specified and directed. |
| 111 | Item No 110 : S&F end balls made in conical surface and coated with brown/cherry/Golden colour dia of ball not less than 50mm and suitable for curtain rod of 20mm dia complete |
| 112 | Item No 111 : 450 mm long PVC connection with brass check nuts for 15mm bore pipes of aproved quality |
| 113 | Item No 112 : S&F PVC in repar connection 15mm dia 600mm long with PTMT nut. |
| 114 | Item No 113 : S&F in repairs 15mm bore brass stop cock, cast copper alloy CP with long shank and cup (concealed type), high pressure with capstan head handle, screwed both ends for iron pipe or for unions. |
| 115 | Item No 114 : S & F Angle stop cock fancy type, brass chromium plated with CP cup 15 mm bore fixed in repair complete all as specified |
| 116 | Item No 115 : Hard core of broken bricks of gauge n exc 63mm, deposited, spread, leveled in layers n exc 15cm thick each layer including watering and well ramming to a true surface. |
| 117 | Item No 116 : 75mm thick, PCC 1:3:6, type C-1 using 20 mm graded stone aggregate, as in plinth protection finished even & smooth without using extra cement complete all as specified and directed . |
| 118 | Item No 117 : Demolition of cement concrete of any description and in any position and removing the rubbish from the work site. |
| 119 | Item No 118 : Preparing surface of sunken slab and applying 15 mm thick cement plaster 1:4 cement sand mortar with integral water proofing compound both on floor and wall.The surface shall then be cured and allowed to dry then applying Epoxy Resin coating polymer modified cementitious coating like brush bond of Fosroc, Pidilite and Bostic as per manufacturer\"s instructions both on floor as well as on wall and sunken floor shall be filled with graded cinder complete all as specified.(IWPC will be paid separately) |
| 120 | Item No 119 : PCC 1:7:12 type using 40 to 60 mm thick brick aggregate as in filling of sunken portion completed all as specified. |
| 121 | Item No 120 : 25mm thick PCC 1:2:4 type B0 using12.5 mm graded stone aggregate as in sunken floor complete as specified and directed. |
| 122 | Item No 121 : M&L for 40 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate with WPC as in sunken portion and making adequate slope toward spout pipe complete all as specified and as directed. NOTE: - Water Proofing Compound shall be measured and paid separately |
| 123 | Item No 122 : M&L for rendering 15 mm thick on concrete orbrick surface in CM (1:3) mixed with WPC as per manufacturer instructions and finishes surfaces even and smooth with out using extra cement.Note - WPC will be measured and paid separtely |
| 124 | Item No 123 : M&L for applying two coats evenly a tack coat of hot air blown bitumen of grade 85/25 @ 1.50 Kg per sqm per coat (one coat overplaster and one coat on polythene film) including cleaning of surface over polythene film complete all as specified and as directed |
| 125 | Item No 124 : M&L for polythene film black 200 micron thick laid in floor, vertical surface etc complete all as specified and directed. |
| 126 | Item No 125 : M&L for PCC (1:5:10) Type E-2 using 40mm graded brick aggregate as in sunken portion complete all as specified and directed. |
| 127 | Item No 126 : S&F PVC (SWR) pipes single socketed in any length with rubber ring joints using solvent adhesives fixed to walls with brackets etc of 110mm dia |
| 128 | Item No 127 : S&F PVC (SWR) pipes single socketed in any length with rubber ring joints using solvent adhesives fixed to walls with brackets etc of 75 mm dia |
| 129 | Item No 128 : S&F PVC (SWR) bends/shoes any radius of 110mm dia |
| 130 | Item No 129 : S&F PVC (SWR) bends any radius provided with access door of 110mm dia |
| 131 | Item No 130 : S&F PVC (SWR) bends any radius provided with access door of 75 mm dia |
| 132 | Item No 131 : S&F PVC (SWR) branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with paralled branches of 110mm bore with access door |
| 133 | Item No 132 : M&L PVC(SWR) Tee of radius 110mm dia. |
| 134 | Item No 133 : S & F PVC(SWR) vent cowel of 110mm dia. |
| 135 | Item No 134 : S&F PVC (SWR) branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with paralled branches of 75 mm bore with access door |
| 136 | Item No 135 : S & F PVC(SWR) vent cowel of 75mm dia. |
| 137 | Item No 136 : S&F 75 mm bore PVC floor trap with 75mm dia grating including jointing to waste pipe, all as specified |
| 138 | Item No 137 : Taking down eaves, gutters and rain water pipes (any sizes or pattern) incl all fitting incl cleaning for refixing or removing to store yard. |
| 139 | Item No 138 : S & F in repair Brass chromium plated wall mixer hot and cold arrangement long shank suitable for 15 mm bore of pipe of approved quality all as specified and directed. |
| 140 | Item No 139 : M&L in repair for salt galzed stone wate gully traps size 150 x150mm square type \"P\" including setting and jointing to drains with CM 1:1 and CI grating including demolition of exisitingtraps complete all as specified and directed. |
| 141 | Item No 140 : S&F in repair waste coupling of PTMT (half or full threaded) for 32mm dia complete all as specified and directed. |
| 142 | Item No 141 : S&F in repair PTMT grating doom 100mm dia. |
| 143 | Item No 142 : Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors |
| 144 | Item No 143 : Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron. |
| 145 | Item No 144 : At points of contact of wood work by chemical emulsion (in oil or kerosene based solution)@ .5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same |
| 146 | Item No 145 : Cleaning of vegetation from RCC/brick work /plaster work including taking and roots etc and making good with cement plaster (plastering will be measureed &paid separate under respective ites. |
| 147 | Item No 146 : M& L door seal of size 18mmx6mm suitable for filling gap below the door made from self adhesive rubber Make MMT or equivalent |
| 148 | Item No 147 : S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, Chhaja, etc fixed with self tapping screws as specified. |
| 149 | Item No 148 : S&F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in Ridge,etcwith self tapping screws or J hooks as specified. |
| 150 | Item No 149 :M&L roof trusses (framed ), trussed, purlins, rails & fastening and heavy bracket framing (beam, tee, angle, channel, flat, etc) incl distance pieces, cleats , holdfast etc complete all as spd & directed. |
| 151 | Item No 150 : M&L Machine pressed precast concrete coloured Inter locking paver block of any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment over sand cushion & laid over sub base all as specified and directed. |
| 152 | Item No 151 : M&L for sand cushioning for cable protection in trenches 8 cm before laying cable and 15 cm deep over the cable complete all as specified and as directed. Note:- Punned thickness shall be taken for measurement. |
| 153 | Item No 152 : Hard core of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick watered and well rammed to a true surface.complete including all as specified & as directed. |
| 154 | Item No 153 : M&L for 100 mm thick cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub base complete including all as specified & as directed. |
| 155 | Item No 154 : Providing and applying two coats of anti corrossive protective coating for reinfircement bars by brush. |
| 156 | Item No 155 : Providing and applying two coats of concrete penetrating corrossion inhibitor on damaged concrete surface by using brush @ 250ml/gm. |
| 157 | Item No 156 : Providing and fixing of 12mm nozzle in the crack portion @500c/c and grouting the holes by poly ceramic cenmentitious i.e. Nicrogrout G 06+53 grade cement material as per requirment. |
| 158 | Item No 157 : Tack welding the new reinforcement bar to the existing bar with minium 50mm lap on both sidecomplete as directed. |
| 159 | External Electrical Supply |
| 160 | Item No 158 : Taking down existing old Extg unserviceable LT UG/ service cable of any description and sizecomplete all as specified and directed. |
| 161 | Item No 159 : M&L XLPE 4 core 16 sqmminsulated, armoured, heavy duty electric cable with aluminium conductor, 1100 Volts grade, in trenches/fixed on wall complete all as specified and as directed. Notes:- (i) Quoted rate shall include the cost of lugs of proper size andcable glands.(ii) Excavation, earthwork, PCC cover and sand cushioning shall be measured and paid seprately. |
| 162 | Item No 160 : Description all as per item No 159 here in before butusing 4 core 25 sqmm |
| 163 | Item No 161 : Excavation in trenches not exceeding 1.5 mtr deep and 1.5 mtr width as in soft/loose soil complete all as specified and as directed. |
| 164 | Item No 162 : Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed. |
| 165 | Item No 163 : Removal of excavated soil to a distance n.exc 50 m and deposited where directed at a level n. exc 1.5 mabove the starting point complete all as specified and as directed. |
| 166 | Item No 164 : M & L for laying bricks, common burnt clay building sub-class \"B\"old size bricksfor protection of cable in trenches complete all as specified and as directed. |
| 167 | Item No 165 : S & FGI tubing medium grade of size 40 mm dia fixed on walls / laid in trenches as protection pipe for under ground cable including provisioning of specials and clamps etc complete all as specified and as directed. |
| 168 | Internal Electrification |
| 169 | Item No 166 : Taking down copper /aluminium point wiring (light, fan, bell,socketor power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc.Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces ofwalls, floors etc complete all as specified and directed at site. |
| 170 | Item No 167 : Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed. |
| 171 | Item No 168 : Taking down carefully copper/aluminium Sub main wiring of any size fromsurface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed. |
| 172 | Item No 169 : Taking down ceiling fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan bladesand deposit to MES store yard of AGE E/M Namkum complete all as specified and as directed. |
| 173 | Item No 170 : Taking down of geyser after disconnecting the electric supply, disconnecting the water pipe (cold and hot water) from the geyser of any make and any capacity,by unscrewing nuts, bolts & washer from its existing place, cleaning geysers tank body properly. and re-fixing the geyser at its original place by screwing nuts, bolts & washer, connecting the water pipe (hot and cold water) and the electric supply including testing of geyser for proper working to the entire satisfaction, all as specified and as directed. |
| 174 | Item No 171 : M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts gradeISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches,including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly all as specified and directed for the following :-(Note- Modular cover plate and base plate of any module with all fittings are included in point wiring.) Contractor should make good even distributed wall/surface as before to match with existing finish with plaster complete all as specified and directed. |
| 175 | (a) One light point controlled by one, one way switch 5 Amps |
| 176 | (b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 177 | (c)One light point controlled by one, two way switch 5 Amps |
| 178 | (d)One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 179 | (e) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. |
| 180 | (f)One bell point controlled by one, bell switch 5 Amps |
| 181 | Item No 172 :Description all as per item No 171 here in before butusing 2.5 sq mm single core copper conductor cable of multistranded FRLSH, PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of2.5 sq mm copper conductor FRLSH, PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. |
| 182 | Item No 173 : S & F for Modular Switch piano flushtype, single pole, one way, and 6 Amp single module complete all as specified. |
| 183 | Item No 174 : S & F for Modular Switch piano flushtype, single pole, two way, and 6 Amp single module complete all as specified. |
| 184 | Item No 175 : S & F for Modular Socket, 6/16A - 2/3 pin combined 2module complete all as specified. |
| 185 | Item No 176 : S & F for Bell push modular 6 Amps single module complete all as specified. |
| 186 | Item No 177 : S & F for Modular Socket, 6A - 2/3 pin combined 2module complete all as specified. |
| 187 | Item No 178 : Supply and fixing ceiling rose surface bakelite3 terminals 65 x 50mm complete all as specified. |
| 188 | Item No 179 : S & Ffor modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed. |
| 189 | Item No 180 : S & Ffor lamp holder , PVC / Polycarbonate type with back plate suitabl for batten/ slanting fittings complete all as specified and directed. |
| 190 | Item No 181 : S & Ffor Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed |
| 191 | Item No 182 : M & L forSub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable sizeincluding concealed in wall etcone runs of PVC insulated with 6 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed.Note:- Two runs of 6 sqmm cable, one runs of 6 sqmm cable and one run of PVC conduit will be measured as one unit |
| 192 | Item No 183 : S & F for sheet metal enclosure MCBDBSPN8 way with 200 Amps rated bus bar 240 volts double door with locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 193 | Item No 184 : S & F for MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, \"C\" curve complete all as specified and as directed. |
| 194 | Item No 185 : S & Ffor MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, \"C\" curve complete all as specified and as directed. |
| 195 | Item No 186 : Labour only for refixing the celing fan/ Exhaust fan obtained from item No 4 above with replacement of unsv3 corePVC insulatedPVC sheated 3 core multistrandedcopper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal including over hauling the fan, painting of ceiling fans complete with two coats synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc. complete all as specified and as directed. |
| 196 | Item No 187 : S & F for Highly efficient LED Bulbs, 10 W, used as a ready replacement for existing GLS/CFL direct fit lamp,in B-22 cap complete all as specified and directed. |
| 197 | Item No 188 : S & F forLED 10 watts batten aluminium extruded with decorative end caps complete all as specified and as directed. |
| 198 | Item No 189 : S & F for Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired with warranty option of 2 years from date of installation andnecessary mounting arrangements , provision of new 3 core multistrandedcopper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. |
| 199 | Item No 190 : S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouputboxtype fitting, 230 volts and intregrated electronic driverconnector block etccomplete with all accessories internally pre wired andnecessary mounting arrangements, provision of new 3 core multistrandedcopper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. |
| 200 | Item No 191 : S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired,andnecessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed. |
| 201 | Item No 192 : S & F ceiling fans complete with blades, down rods, electronic regulator accessories, 230 v , 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushleess direct current motor (BLDC). |
| 202 | Item No 193 : S & F for energy efficient exhaust fan of 230 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan forconnection and making suitable size ofhole to existing brick wall for fan baseand making good finish after installation compelte all as specifiedand directed.(Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be includedin overall rate quoted). |
| 203 | Item No 194 : M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type ofsoil/strata and testing on completion. Note:- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. |
| 204 | Item No 195 : Supply, installation, testing and commissioning of factory made meter panel board wall mounted made out of CRCA sheet of 2mm thick indoor type totally enclosed weather proof, dust vermin proof with front openable, hinged door locking arrangement mounted on MS clamp welded to panel body duly grouted in wall including provn of Acriylic sheet for meter reading, space for refixing of single phase KWH meter 5-60 Amps -4 Nos AC 230 Volts incl lugs, spacer mounting chanels, rubber gasket, locking knobs, PVC shrinkable sleeves, nut bolts, washers etc, suitable compartment of every meter and control MCB circuit and epoxy powder coated spray paint with primer, CPRI type tested complete all as directed including the following accessories:-Incoming (a) MCCB 100 amps 04 pole ,415 Volts, 16 KA - 01 No(b)R-Y-B phase LED indicating lamp-03 Nos (c)Copper wiring in panel of suitable size (d) 200 Amps TPN copper busbarOut going (a)MCB 40 amps SPN, 230 Volts, 10 KA - 4 Nos (b)MCB SPN 10Amps ,230Volts, 10KA-01 No (c)taking down and Re-fixing existing electric meter - 4 Nos (Note: taking down electric meter and keep safe costody and refixing to same and to be insured properly maching the qtr Nos before fixing the electric meter) |
| 205 | Item No 196 : Supply, installation, testing and commissioning of factory made meter panel board wall mounted made out of CRCA sheet of 2mm thick indoor type totally enclosed weather proof, dust vermin proof with front openable, hinged door locking arrangement mounted on MS clamp welded to panel body duly grouted in wall including provn of Acriylic sheet for meter reading, space for refixing of single phase KWH meter 5-60 Amps -5 Nos AC 230 Volts incl lugs, spacer mounting chanels, rubber gasket, locking knobs, PVC shrinkable sleeves, nut bolts, washers etc, suitable compartment of every meter and control MCB circuit and epoxy powder coated spray paint with primer, CPRI type tested complete all as directed including the following accessories:-Incoming (a) MCCB 125 amps 04 pole ,415 Volts, 16 KA - 01 No(b)R-Y-B phase LED indicating lamp-03 Nos (c)Copper wiring in panel of suitable size (d) 200 Amps TPN copper busbarOut going (a)MCB 40 amps SPN, 230 Volts, 10 KA - 5 Nos (b)MCB SPN 10Amps ,230Volts, 10KA-01 No (c)taking down and Re-fixing existing electric meter - 5 Nos (Note: taking down electric meter and keep safe costody and refixing to same and to be insured properly maching the qtr Nos before fixing the electric meter) |
| 206 | Item No 197 : Supply, installation, testing and commissioning of factory made meter panel board wall mounted made out of CRCA sheet of 2mm thick indoor type totally enclosed weather proof, dust vermin proof with front openable, hinged door locking arrangement mounted on MS clamp welded to panel body duly grouted in wall including provn of Acriylic sheet for meter reading, space for refixing of single phase KWH meter 5-60 Amps -7 Nos AC 230 Volts incl lugs, spacer mounting chanels, rubber gasket, locking knobs, PVC shrinkable sleeves, nut bolts, washers etc, suitable compartment of every meter and control MCB circuit and epoxy powder coated spray paint with primer, CPRI type tested complete all as directed including the following accessories:-Incoming (a) MCCB 160 amps 04 pole ,415 Volts, 16 KA - 01 No(b)R-Y-B phase LED indicating lamp-03 Nos (c)Copper wiring in panel of suitable size (d) 200 Amps TPN copper busbarOut going (a)MCB 40 amps SPN, 230 Volts, 10 KA - 7 Nos (b)MCB SPN 10Amps ,230Volts, 10KA-01 No (c)Taking down and Re-fixing of existing electric meter - 7 Nos (Note: taking down electric meter and keep safe costody and refixing to same and to be insured properly maching the qtr Nos before fixing the electric meter) |
| 207 | Item No 198 : Supply, installation, testing and commissioning of factory made meter panel board wall mounted made out of CRCA sheet of 2mm thick indoor type totally enclosed weather proof, dust vermin proof with front openable, hinged door locking arrangement mounted on MS clamp welded to panel body duly grouted in wall including provn of Acriylic sheet for meter reading, space for refixing of single phase KWH meter 5-60 Amps -8 Nos AC 230 Volts incl lugs, spacer mounting chanels, rubber gasket, locking knobs, PVC shrinkable sleeves, nut bolts, washers etc, suitable compartment of every meter and control MCB circuit and epoxy powder coated spray paint with primer, CPRI type tested complete all as directed including the following accessories:-Incoming (a) MCCB 200 amps 04 pole ,415 Volts, 16 KA - 01 No(b)R-Y-B phase LED indicating lamp-03 Nos (c)Copper wiring in panel of suitable size (d) 200 Amps TPN copper busbarOut going (a)MCB 40 amps SPN, 230 Volts, 10 KA - 8 Nos (b)MCB SPN 10Amps ,230Volts, 10KA-01 No (c)Taking down and Re-fixing of existing electric meter - 8 Nos (Note: taking down electric meter and keep safe costody and refixing to same and to be insured properly maching the qtr Nos before fixing the electric meter) |
| 208 | SCHEDULE \"A\"(Schedule of credit )Schedule of Credit Rs 589839.00 (Minus) inserted by the MES. (Note : Credit amount shall be deducted manually to arrive net amount) |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
