|
| 1 | Dismantling of Wallandceilingboards(fibre, pulp, insulation, etc.) or insulationboards/slabs/ blankets, any thickness, including cover fillets andincluding re-fixing in position complete all as specified and directed. |
| 2 | M&L for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructionsfalse ceiling including sunk or raised mouldingpattern approved by GE fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finishincluding necessary supporting hanger with 4.0 mm dia GI wire and \"J\" bolts washer nuts for securing frame work toGl frame work for (605 mm x 605 mm) seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre incl thin layer of putty with gypsum binder, sanding the sufrace till smooth surface is obtained and applyingtwo coats of oil bound distemper over a coat of primercompleteall as specified and directed |
| 3 | M&L for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, as perdrawings and complete all as specified and directed. |
| 4 | S&F4mm thick selected qualityfrosted glassin squares in exc 0.5 sq.m in each pane including solar control film 25 micron reflective type sticked to glass panes as per instructionsof manufacturersfixing with rubber beading or PVC gasket etc complete all as specified and directed |
| 5 | S&F 6 mm thick Nonasbestos fibre cement building boardsfixed or laid/ inserted to timber/GI/Alumi- niumframe work with screwas work in ceiling flat or sloping complete all as specified and directed. |
| 6 | S&F anodised aluminium snap grid frame work Size of grid 605 x 605 mm for false ceiling etc complete all as specified and directed. |
| 7 | M&L for 6mm thk Plywood, grade BWR, type BB,fixed with screwsto timber frame work fixedin celling flat or sloped with circularor notching and waste on plywood including necessary supporting of and applyingtwo coats of synthetic enamel paint over a coat of pink primercomplete all as specified and directed. |
| 8 | M&L for clean sawn second classhardwood in scantlingsin repairs, to replace old and decayed timber (including piecing, scarfing, etc., of old and new timbers if required) and removing defective portions to store complete all as specified and directed |
| 9 | S&F 4mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work etc complete all as specified and directed. |
| 10 | M&L andfixed in repair12mm thickforprelaminatedparticleboard interiorgradeprelaminatedonesidewith decorativechoicelamination & othersidebalancingwhitelamination fixedwith screw totimber framework complete all as specified and directed. |
| 11 | S&F in repairs 18/19 mm thick block board of commercial quality Gde-2 fixed with screws as in pelmet boxes etc complete all as specified and directed |
| 12 | S&F in repairs18/19 mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on both faces fixed with screws as in cup board shutters & shelves etc complete all as specified and directed . Note: The frame work will be measured and paid seperately |
| 13 | M&L for 2nd class hard wood cover fillets, bull nosed, splayed, chamfered or rounded on one edge or face, wrought, secured with fevicol and nails, sectional area exc. 6 Sq.cm but not exc. 13 Sq.cm complete all asspecified and as directed. |
| 14 | M&L for 2nd class hard wood cover fillets, bull nosed, splayed, chamfered or rounded on one edge or face, wrought, secured with fevicol and nails, sectional area exc. 13 Sq.cm but not exc. 25 Sq.cm complete all asspecified and as directed. |
| 15 | M&L for second class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed |
| 16 | S&F contineous (piano) hinges, mild steel bright finish of 40 mm width of flaps(when open) complete all as specified and directed. |
| 17 | Dismantling of single layer of manglore/ Similar pattern tiles in roofing complete all as specified and directed. |
| 18 | Dismantling of battens of tiles of any size and description spaced exc 15 cm, including tiling fillets complete all as specified and directed. |
| 19 | M&L for clean sawn second classhardwood tile battens at 30cm centres, exe 5 and n.exe 15 sqcm sectional area complete all as specified and directed |
| 20 | Ditto all as per itemNo. 19 above but except battens |
| 21 | M&L for preparing tile battens of any size and spacing andtreated all over (measured overall on one side only spaces not deducted) with two coats of cresoting oil etccomplete all as specified and directed |
| 22 | M&L for providing roof tiles manglore pattern interlocking at side joints, laid dry (at any height of bldg), complete all as specified and directed |
| 23 | M&L in repair for ridge or hip tiles to suit mangalore pattern of roofing tiles, bedded and jointed in CM (1:6) complete all as specified and directed |
| 24 | S&F in repair 20mm thick second class hard-wood in eaves boards etccomplete all as specified and directed |
| 25 | Dismantling structural steel work incl. steel door,gate,window guard bars,grills etc.complete all as specified and directed. |
| 26 | S&F for Collapsible steel gates top hung consisting of channel pickets, pivoted flat bars top and bottom runners brass handles etc as specified erected in position and securing runners with holdfasts and brackets complete all as specified and directed. |
| 27 | S &F 1.25 mm thick Steel rolling shutters without ball bearing as specified including top cover , anchoring rod hasp and staple and one shop coat of primer errected in position as indicated complete push pull or manual type complete all as specified and directed. |
| 28 | S&F Ball bearing suitable for rolling shutters complete all as specified and directed. |
| 29 | S & F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. |
| 30 | M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces incl preparation of surfaces complete all as specified and directed. |
| 31 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc. 1.5 sqm each complete all as specified and directed |
| 32 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n.exc 4 Sqm each complete all as specified and directed |
| 33 | Taking down Shutters of any description n.exc. 1 Sqm each complete all as specified and directed. |
| 34 | Taking down Shutters of any description exc.1 Sqm and n.exc 2 Sqm each complete all as specified and directed. |
| 35 | Taking down door shutters and resecuring or easing and adjusting and refixing in the same opening of shutters of any description n.exc 1 Sqm complete all as specified and directed. |
| 36 | Taking down door shutters and resecuring or easing and adjusting and refixing in the same opening of shutters of any description .exc 1 Sqm and n.exc 2 Sqm complete all as specified and directed. |
| 37 | Taking down door shutters and resecuring or easing and adjusting and refixing in the same opening of shutters of any description exc 2 Sqm complete all as specified and directed. |
| 38 | S&F 35 mm thick factory made plain framed, panelled shutters with 2nd class hard wood rails and panel of 9mm BWP commercial ply 12mm thick veneered particle board with commercial veneers on both faces.The size of rail or style shall be as per IS 1003 Part-I Kiln seasoned and chemically pressure treated complete all as specified and directed |
| 39 | M&L for second class hard wood glazed and skeleton shutter 30mm thick, factory made, open rebated and prepared to receive glass/gauge etc, sash bars, mitred and rebated, with edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc, sizes of stiles, rails etc as specified in section 8, clause 8.24 (b) of SSR part-I(2009) complete all as specified and directed |
| 40 | S&F 35 mm thick secondclasshardwood factory made glazed and skelton shutters open rebated and prepare to receive glass/ guage (with sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass/guage etc size of member etc size members of shutters as specified in SSR part I Section-8 clauses 8.24(b) supplied and fited to chowkhat made out of 2nd class hard wood, 35mm thick and styles 75mm wide complete all as specified and directed |
| 41 | S& F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed. |
| 42 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain Panelled door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws,complete all as specified and directed.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 43 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supply and fixing in opening as per the specification and drawing complete all as specified and directed |
| 44 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with hit moulded plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the tiles and rail with suitable PVC sheet bedding and joined together with solvent cement, supplying and fixing in the frame at site as per specificaton & drawing complete all as specified and directed |
| 45 | M&L for preparation of new wooden surfaces and paintingtwo coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed |
| 46 | S&Fanodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 47 | S&F anodised aluminium powder coated (thickness or powder coating not less than 50 micron) door shutter, aluminium section wt 0.55 Kg/m including neccesary joining cleats, glazing clips,rubber neoprene packing, handle 2 nos in each door, hinges, anodised aluminium snap beading screw etc ,complete all as specified and directed |
| 48 | S&F4.80mm thick selected quality plain or grounded or frosted glassin squares in exc 0.5 sq.m in each pane including solar control film 25 micron reflective type sticked to glass panes as per instructionsof manufacturersfixing with rubber beading or PVC gasket etc complete all as specified and directed |
| 49 | S&F powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. including fixing of 5 mm thick Sheet glass, complete all as specified. Fixing included the making good of the opening, such as plastering jambs, levelling and finishing complete all as specified and directed |
| 50 | S&F aluminium powder coated three track sliding window with mosquito net two track for glass leaf sliding and one track for mesh leaf sliding outer frame weighing 0.699 Kg/m,75x26 mm size equvalentJindal model 20671, shutter plain of size 37.5x15mm weighing 0.366 Kg/m, Section No 20690 Jindal), with powder coating of min thickness 50 micron with one or more rebates, sliding type without sash bars, 5mm thickness double tampered clear glass , rubber packing, snap beading screws,with horizontal sliding type with stainless steelmesh,frame,powder coated aluminium grill type AL 925 or equvalent grill, cutting in suitable size and fitting with screws and suitable beedings to aluminum window frame completeetc. complete all as specified and directed. |
| 51 | S&FStainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including taking out wooden beads and incl supply & fixed wooden beadsin the same position complete all as specified and directed. |
| 52 | S&F 100mm butt hingescold rolled mild steel medium weight and fixed complete all as specified and directed |
| 53 | S&F 100mm Aluminium handles, cast type, anodised complete all as specified and directed |
| 54 | S&F 150mm Aluminium handles, cast type, anodised complete all as specified and directed |
| 55 | S&F75mm butt hingescold rolled mild steel medium weight and fixedcomplete all as specified and directed |
| 56 | S&FAluminium anodised barrel tower bolts of extruded section100mm long complete all as specified and directed |
| 57 | S&FAluminium anodised barrel tower bolts of extruded section 75mm long complete all as specified and directed |
| 58 | S&F for Aluminium anodised, barrel tower bolts 150mm long of ex- truded section and fixed complete all as specified and directed |
| 59 | S&F300 mm long aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed |
| 60 | S&F in repairs 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed |
| 61 | S&F in repair harrison rails 20mm dia, mild steel, chromium plated with fixing brackets, stops, rollers etc.complete all as specified and directed |
| 62 | Hacking out old broken glass(any thickness, size, quality or discription) from wooden frames or stone, concrete or brick surrounds , glazed with puttyor fixed with beads complete all as specified and directed. |
| 63 | S&FSheet glass 3 mm thick ordinary quality and glazing with oil putty incl wooden beads supply & fixing in square n exc 0.5 sqm in each pane complete all as specified and directed |
| 64 | S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane complete all as specified and directed |
| 65 | S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including taking out wooden beads and incl supply & fixed wooden beadsin the same position complete all as specified and directed |
| 66 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etcincluding cleaning off premises where complete all as specified and directed. |
| 67 | M&L for 20 (+ /- 2mm) thick Granite (of jet black ) work (table rubbed and polished ) in steps ,jambs ,pillars,window cills, cooking plateforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granitelaid over& including 15 mm thick screed bed cement mortar(1:6) completeall as specified. Exposed edges to make half round complete all as specified and directed.. |
| 68 | S&F in repair Door closer hydraulically regulated,designation No. 2,universal type, aluminium (Die cast) body suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed etc.complete all as specified and directed. |
| 69 | S & F40 mm dia cup board knobs fixed with nuts screw and washers of mild steel ,brass polished complete all as specified and directed. |
| 70 | S & F 125 mm size Hasp and staple, safety type,brass with mild steel hinge pin including bolt to hinge plate and fixed with screwse and fixed with screws complete all as specified and directed. |
| 71 | Demolition of brick / block masonry/ Stone masonry built in Cement mortar complete all as specified and directed. |
| 72 | M&L for precast cement concrete (1:3:6) type C-1 ( using 20mm graded aggregate ) block masonry with solid blocks exc10 cm thick in width and setting in cement mortar 1:6 complete in wallcomplete all as specified and directed. |
| 73 | Taking down cement plaster on brick or stone walls etc including raking out joints,hacking for key ,scrubbing down with water etc complete all as specified and directed. |
| 74 | M&L for 15 mm thick cement plaster on brick or concrete surface in cement mortar (1:6) included finishing surface even and smooth without using extra cement onwalls etc complete all as specified and directed |
| 75 | M&L for 10mm thick cement plaster on concrete surface in cement mortar (1:3) included finishing surface even and smooth without using extra cement on ceiling etc complete all as specified and directed |
| 76 | M&L for 15 mm thick cement plaster on brick or concrete surface in cement mortar (1:4) included finishing surface even and smooth without using extra cement onwalls etc complete all as specified and directed |
| 77 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over one coat of alkali registant priming paint etc complete all as specified and directed. |
| 78 | Ditto all as per item No 77 above but in ceiling etc complete all as specified and directed. |
| 79 | M&L for preparation of newly plastered surfaces of wall and applying twocoats of cement base paint white or tinted including scaffolding arrangement, trestles, ladders etc complete all as specified and directed. |
