|
| 1 | SCH \"A\" PART- I To VIII:Note: This schedule is pre-priced by MES and the rate indicated as under Col 5 signifies this fact only |
| 2 | Total amount of Sch ‘A’ Part I (Building & Structures) |
| 3 | Total amount of Sch \"A\" Part-II (Site Clearance,Excavation and Earthwork) |
| 4 | Total amount of Sch ‘A’ Part III (Internal Electric Supply) |
| 5 | Total amount of Sch ‘A’ Part IV(Road, Path& Culverts) |
| 6 | Total amount of Sch ‘A’ Part V(Area Drainage) |
| 7 | Total amount of Sch \"A\" Part-VI(External Water Supply) |
| 8 | Total amount of Sch \"A\" Part-VII (External Electric Supply) |
| 9 | SCH \"A\" PART- VIII (MISC B/R ANDE/M WORKS)NOTE: Schedule ‘A’ Part Ito VII items, which are notPrepriced by MES are given hereunder, Bidders shall insert their rate in Column-6 only and the Estimated rate indicated as \"0.0\" are for that purpose. |
| 10 | S&F LED lights fitting 20 W, 220V AC, 4 feet tube light fitting extruded aluminium housing and robust construction LED lighting with lumen output, environmental friendly, energy efficient CRI-6500K, P.F not less than 0.95, fixed on PVC square box for mounting the fitting & electrically connecting with three core 23/0.0076 PVC insulated multi stranded copper flexible cable from ceiling rose to light fitting (connector of lamp fitting) and one for earthing complete all as specified and directed. |
| 11 | S&F LED security light fitting 30 W, 110 lm/W, 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP-66 protection, complete all as specified and directed. |
| 12 | S&F Street light bracket made out of 40 mm dia light grade GI pipe duly bend by hot forging after of length 1.50 Mtr long including two pairs of MS flat iron strip 35 mm x 4 mm clamps of suitable size with necessary GI nuts 75 mm in length 12 mm dia-04 Nos with flat washers 3 mm thick -04 Nos including painting with aluminium paint over one coat of red oxide primer to the MS clamps and bracket etc. complete and fixing on wall/poles complete all as specified and directed. |
| 13 | M&L Earthing with 600x600x6mm galvanised steel earth plate electrode buried vertically in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the plate at a depth of not less than 1.5m below ground level, connected to and connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel, GI pipe 15 mm dia light grade pipe for protection of GI earth lead wire both to be provided to the extent of 7.5 metres as earthing lead and connecting to the eqpt/machinery etc. including charcoal dust and common salt packed all around the earth plate in alternate layer in the earth pit all as per electrical plate No. 3 of SSR Part I-2009 Including PCC chamber made up of PCC 1:3:6 type C1 & RCC Chamer cover of size 540x540x100 mm made with 1:2:4 Type B1 using 6 mm round MS bar & 8 mm MS bar for handle, 20 mm dia medium grade G.I. watering Pipe from top edge of the earth plate upto M.S. funnel with wire mesh provided inside the concrete earth pit for watering arrangement including excavation and earth work in any type of soil and testing complete all as specified and directed. |
| 14 | Supply & layingDWC HDPE pipe of outer Dia of 40 mm and inner dia of 32 mm polyethylene (PE) with smooth-internal and profiled external surfacefor non pressure for under ground cable including bends, fittings for jointing etc complete all as specified and directed. |
