|
| 1 | Dismatling A.C. sheets roofing, conveying and stacking the AC sheets in the store yard within a lead of 1 K.M including removing of \"L\" hooks, washers etc. complete. |
| 2 | Brick masonry in C.M.1:5 for superstructure including cost of materials, all labour charges, minor tools, transportation charges, etc. complete. |
| 3 | Providing and laying 12mm cement plaster of mix1:5 (1 cement, 5 M sand) including cost of all labour charges, materials and minor tools etc complete. |
| 4 | Painting two coats with ready mixed acrylic plastic emulsion paint (extra) antifunges out side/inside ofthe building including after rubbing with sand paper and cleaning the surface all labour charges, materials etc., complete. |
| 5 | Painting one coat on old wood work with ready mixed synthetic enamel paint on doors, windows & ventilators. Including cost of all labour charges, cost of all materials and minor tools etc. complete as per the direction of Engineer-in- charge. |
| 6 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 7 | Providing and fixing 1st quality ceramic glazed tiles confirming to IS 13753 of minimum thickness 5mm of approved make like Nitco, Orient, Somany, Kajaria or equivalent make in all colours of any size as approved by EIC for skirting, rises of steps and dados walls over 12 mm CM 1:3 and pointing with coloured cement including cost of all materials, labour charges forming and placing of cement mortaretc. complete |
| 8 | Repairing damaged windows shutter by providing required hinges, handle tower bolt etc. including cost of all materials and labour charges etc complete. |
| 9 | Repairing damaged Door shutter by providing required hinges, handle tower bolt etc. including cost of all materials and labour charges etc complete. |
| 10 | Providing and fixing white vitreous china pedestal type watercloset (Europeantype W.C pan) with seat and lid, CP brass hinges and rubber buffers, 10 litre low level PVC flushing cistern with fittings C.I, MS brackets, 40 mm diameter flush pipe with fittings and clamps, overflow arragement with specials and mosquito proof coupling of approved municipal design including painting of fittings and brackets, cutting and making good the walls and floors wherever required. (WC Pan with white solid plastic seat & lid) |
| 11 | Providing and fixing 12.5 liters low level flushing cistern with a pair of CI or MS Backet complete with fittings such as lead, valve with syphon 15mmnominal size brass ball valve with polythen float, C.P. Brass, handle, unions and coupling for connection with inlet, outlet and over flow pipe, 40mm dia,PVC flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closetincluding cost of all materials, all labour charges, transportation charges, minor tools etc. complete. |
| 12 | Providing and fixing white vitreous china wash basin (ISI Marked)with CI / MS brackets, 15 mm CP brass pillar taps, 32 mm CP brass waste of standard parttern, including painting of fittings and brackets, cutting and making good the walls wherever required.Flat back wash basin size 630x450 mm with a pair of 15 mm CP brass pillar taps. |
| 13 | Steel fabrication for roof truss Gindal or equivalent type coated tubes / sections in various sizes, including cutting, hoisting.Fixing in position applying one primer coat followed by two coats of paints and welded with bolts and nuts etc, including cost of all labour charges minor tools, transportation, fixing charges cost of all labour charges all materials etc, complete. |
| 14 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of currugation as approved by Engineer-in-chagre) 0.50 mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS : 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/ self tapping screws of size (5.5x55mm) with EDPM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusess and including cutting to size and shape wherever required. |
| 15 | Providing and fixing precoated galvaniesd steel sheet roofing ridges accessoriess 0.50 mm (+0.05%) total coated thicknesss, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 micons epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping srews complete. |
