|
| 1 | Wiring for light point / fan point /call bell point / exhaust fan point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable in surface / recessed with medium class PVC conduit/Casing caping, modular switch, modular plate, suitable size GI box and earthing the point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable etc as required. Make – Wire:-Havells/Finolex/RR Kabel/KEI/ Equivalent/ Approve by engineer in charge Make: Conduit/Casing -caping:-Presto-plast/Precision/ Polycab/Equivalent/ Approve by engineer in charge |
| 2 | Group-A |
| 3 | Group-B |
| 4 | Group-C |
| 5 | Wiring for twin control light point with 1.5 sq.mm FRLS PVCinsulated copper conductor single core cable in surface /recessed steel conduit, 2 way modular switch, modular plate,suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVCinsulated copper conductor single core cable etc. as required |
| 6 | Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor , single core cable in surface / recessedwith medium class PVC conduit/Casing caping as required. Make-Wire:- Finolex/Havells/RR Kabel/KEI/Equivalent/ Approve by engineer in charge Make: Conduit/Casing -caping:-Presto-plast/Precision/Polycab/Equivalent/ Approve by engineer in charge |
| 7 | 2 X 2.5 sq mm +1 X 2.5 sq mm earth wire |
| 8 | 2 X 4 sq mm +1 X 4 sq mm earth wire |
| 9 | 2 X 10 sq mm +1 X 6 sq mm earth wire |
| 10 | 4 X 4 sq mm +2 X 4 sq mm earth wire |
| 11 | 4 X 6 sq mm +2 X 6 sq mm earth wire |
| 12 | 4 X 10 sq mm +2 X 6 sq mm earth wire |
| 13 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface /recess including cutting the wall and making good the same in case of recessed conduit as required. Make-Conduit -:Presto plast/Precision/Polycab/Equivalent/ Approve by engineer in charge |
| 14 | 20 mm |
| 15 | 25 mm |
| 16 | 32 mm |
| 17 | 40 mm |
| 18 | 50 mm |
| 19 | Supplying and drawingfollowing sizes of FRLS PVC insulated 1.1 kv grade copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required. Make- Wire:- Finolex/Havells/RR Kabel/KEI/Equivalent/ Approve by engineer in charge |
| 20 | 3 X 2.5 sq mm |
| 21 | 3 X 4 sq mm |
| 22 | 3 X 6 sq mm |
| 23 | Painting on G.I sheet with two coats of synthetic enamel paint of Asian paints/Berger/equivalent appoved by EIC of required colour to give an even shad including a coat of approved steel primer after cleaning the surface. |
| 24 | Supplying and fixing metal box(ISI marked) of following sizes on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. |
| 25 | 75 mm X 75 mm X 60 mm deep |
| 26 | 100 mm X 100 mm X 60 mm deep |
| 27 | 150 mm X 75 mm X 60 mm deep |
| 28 | 150 mm X 150 mm X 60 mm deep |
| 29 | 180 mm X 100 mm X 60 mm deep |
| 30 | 200 mm X 125 mm X 60 mm deep |
| 31 | Supplying and fixingfollowing sizes / modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. Make- Crabtree (Athena), Crabtree(Thames) /Wipro (Nowa)/Legrand (Myrius) and Legrand(Mylinc) /MK (Wraparound plus)/equivalent appoved by EIC as per site requirement. |
| 32 | 1 or 2 Module |
| 33 | 3 Module |
| 34 | 4 Module |
| 35 | 6 Module |
| 36 | 8Module |
| 37 | 12 Module |
| 38 | Supplying and fixingfollowing modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc as required .This includes disconnecting and dismantling the old items and depositing them to store.Make-Crabtree /Legrand/ MK/equivalent appoved by EIC fornew work and as per site requirement for maintenance work in the existing switch boards. |
| 39 | 5 /6 amps switch |
| 40 | 15 /16 amps switch |
| 41 | 3 pin 5 /6 amps socket outlet |
| 42 | 6 pin 15 / 16 amps socket outlet |
| 43 | Bell push |
| 44 | S&F of modular type 1M 5 stepped/dimmer electronic fan regulator on existing board with all connection as required. Make: Crabtree/Legrand /Anchor/Equivalent/ Approve by engineer in charge |
| 45 | Supplying and fixing 2 module 5 stepped / dimmer type electronic modular fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required |
| 46 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. Make-Anchor/SSK/ Equivalent/ Approve by engineer in charge |
| 47 | Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.Make-Anchor/SSK/Equivalent/ Approve by engineer in charge |
| 48 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required Make- Crabtree Thames platinum range/Wipro Nowa/Legrand Myrius/Mylinc range/MK -Wraparound plus/ Equivalent/ Approve by engineer in charge |
| 49 | Supplying & Fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \"C\" curve including connections,painting etc. as required. Make-Crabtree/Wipro/Legrand/ MK/Equivalent/ Approve by engineer in charge |
| 50 | Dismantling of old and unusable wirings, cables, DB, Earth spikes, unusable earth strips, Board with switch, socket,light fittings etc. from one room and cleaning the areas. Dismantling items should be deposited to the store as per direction of the site in charge. |
| 51 | Installation , testing and commissioning of wall fan/ceiling fan including wiring the down rods of standard length (upto 30 cm ) with3 X1.5 sq mm FRLS PVC insulated copper conductor single core cable etc as required. |
| 52 | Supply and fixing 2.0/2.5 micro farad, 440V AC, metal body capacitor in defective ceilling fan at site. Make : Tibcon/Universal/Epcos/ Equivalent/ Approve by engineer in charge |
| 53 | Extra for fixing the louvers / shutters complete with frame for a exhaust fan of all sizes. |
| 54 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required incl. S+F of 1 X 10 SWG GI wire for E.C.C making holes and manding good the damages to original finish incl. Painting. |
| 55 | Upto 35 sq mm (clamped with 1 mm thick saddle) |
| 56 | Above 35 sq mm and upto 95 sq mm (clamped with 25 X 3 mm MS flat clamp) |
| 57 | Above 95 sq mm and upto 185 sq mm (clamped with 25/40 X 3 mm MS flat clamp) |
| 58 | Above 185 sq mm and upto 400 sq mm (clamped with 40 X 3 mm MS flat clamp) |
| 59 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on cable tray incl. S+F of 10 SWG GI wire as earth wire as required. |
| 60 | Upto 35 sq. mm (clamped with 1mm thick saddle @ 3 sets per metre.) |
| 61 | Above 35 sq. mm and upto 95 sq. mm (clamped with 25 X 3mm MS flat clamp @ 3 sets per metre.) |
| 62 | Above 95 sq. mm and upto 185 sq. mm (clamped with 25 X 3mm MS flat clamp @ 3 sets per metre.) |
| 63 | Laying of cable as below after cutting floor/pavement/wall/ and making holes incl embedding the cable at an average depth as below and mending good the damages to original finish incl S+F of 1 X 10 SWG wire for ECC. |
| 64 | From 2.5 sq mm to 35 sq mm at an average depth of 75 mm in floor/ pavement/wall etc. |
| 65 | Above 35 sq mm to 95 sq mm at an average depth of 100 mm in floor/ pavement/wall etc. |
| 66 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering@ 8 bricks per metre on each cable and refilling the trench etc. as required. |
| 67 | Upto 35 sq. mm |
| 68 | Above 35 sq. mm and upto 95 sq. mm |
| 69 | Above 95 sq. mm and upto 185 sq. mm |
| 70 | Above 185 sq. mm and upto 400 sq. mm |
| 71 | Laying of one number additional PVC insulated and PVCsheathed / XLPE power cable of 1.1 KV grade of following sizedirect in ground in the same trench in one tier horizontalformation including excavation, sand cushioning, protectivecovering and refilling the trench etc as required. |
| 72 | Upto 35 sq. mm |
| 73 | Above 35 sq. mm and upto 95 sq. mm |
| 74 | Above 95 sq. mm and upto 185 sq. mm |
| 75 | Above 185 sq. mm and upto 400 sq. mm |
| 76 | Supplying and making end termination with brass compression gland and lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 kV grade as required. Make-ARUN/Dowells/Equivalent/ Approve by engineer in charge |
| 77 | 4 X 6 sq mm |
| 78 | 4 X 10 sq mm |
| 79 | 4 X 16 sq mm |
| 80 | 3.5 X 25 sq mm |
| 81 | 3.5 X 35 sq mm |
| 82 | 3.5 X 50 sq mm |
| 83 | 3.5 X 70sq mm |
| 84 | 3.5 X 95 sq mm |
| 85 | 3.5 X 120 sq mm |
| 86 | 3.5 X 400 sq mm |
| 87 | Supplying and making straight through joint with heatshrinkable kit including ferrules and other jointing materials forfollowing size of PVC insulated and PVC sheathed / XLPEaluminium conductor cable of 1.1 KV grade as required. |
| 88 | 4 X 16 sq mm |
| 89 | 3.5 X 25 sq mm |
| 90 | 3.5 X 35 sq mm |
| 91 | 3.5 X 50 sq mm |
| 92 | 3.5 X 70sq mm |
| 93 | 3.5 X 95 sq mm |
| 94 | 3.5 X 120 sq mm |
| 95 | 3.5 X 150 sq mm |
| 96 | Supply & embedding of 32 mm GI pipe(medium class) in pole collar /foundationfor cable entry including bending the pipe. Make: Bansal/Tata/ Jindal/Equivalent/ Approve by engineer in charge |
| 97 | Supply & embedding of 40 mm GI pipe(medium class) in pole collar /foundationfor cable entry including bending the pipe. Make: Bansal/Tata/ Jindal/Equivalent/ Approve by engineer in charge |
| 98 | Painting of Steel Tubular Pole of upto/above 9.0 mtrs. long pole.and RO Primer with 2 coats Aluminium paint, as given below with ready mixed paint/primer of Asian paints/Berger/ approved make incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint. |
| 99 | Earthing with GI earthpipe 4.5 mtrlong, 40 mm dia including accesssories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required.Make: TATA(Medium)/Bansal(Medium)/Jindal(Medium)/ Equivalent/ Approve by engineer in charge |
| 100 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and 40 mm dia. GI (medium gauge) watering pipe of 2.7 metre long etc with charcoal / coke and salt as required. Makee:-TATA(Medium)/Bansal(Medium)/Jindal (Medium)/ Equivalent/ Approve by engineer in charge |
| 101 | Providing and fixing 6 SWG dia GI wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required for GI pipe earthing & others. |
| 102 | Providing and fixing 4.00 mmdia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required for copper plate earthing. |
| 103 | Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. All Joints should be done by Brazing only after 4\" overlapping the strips or as decided by the Engineer in charge. |
| 104 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc.as required. All Joints should be done after 4\"over lapping of the strips and by welding only. |
| 105 | Supply and Fixing medium gauge Gi pipe (ISI-Medium) protection for cable entry includingbending the pipe to the required shape complete as required with laying of wire/cable through pipe.Make- TATA/Bansal/Jindal/Equivalent/ Approve by engineer in charge |
| 106 | 25 mm |
| 107 | 40 mm |
| 108 | Fixing of followings size DB directly on surface / recessed /on flat iron legs on wall including necessary connection as required. |
| 109 | SPN MCB DB (4 to 16 way) |
| 110 | TPN MCB DB (4 to 12 way) |
| 111 | Providing and fixing of 100 A, 16 kA,TP MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. |
| 112 | Providing and fixing of 125 A, 16 kA,TP MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. |
| 113 | Supplying and fixing TPN sheet steel Enclosure on surface/recess along with 16/25/32 Amp,415 V \"C\" curve TPN MCB complete with connection, testing and commissioning etc. as required. Make-Legrand/Hager/ Seimens/Equivalent/ Approve by engineer in charge |
| 114 | Supplying and fixing DP sheet steel Enclosure on surface/ recess along with 25/32 Amp, 415 V \"C\" curve DP MCB complete with connection, testing and commissioning etc.as required. Make- Legrand/Hager/Seimens/Equivalent/ Approve by engineer in charge |
| 115 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) Make-Legrand/Hager/Seimens/Equivalent/ Approve by engineer in charge |
| 116 | 8 way , Double door |
| 117 | 12 wayDouble door |
| 118 | Supplying and fixing of following ways surface/ recess mounting, horizontal type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. Make: Legrand/Hager/Seimens/Equivalent/ Approve by engineer in charge |
| 119 | 4 way (4 + 12), Double door |
| 120 | 6 way (4 + 18), Double door |
| 121 | Supplying and fixing of following ways surface/ recess mounting, Vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.). Make: Legrand/Hager/Seimens/Equivalent/ Approve by engineer in charge |
| 122 | 4 way (4 + 12), Double door |
| 123 | 8 way (4 + 24), Double door |
| 124 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make- Legrand/Hager/Seimens/Equivalent/ Approve by engineer in charge |
| 125 | Single pole |
| 126 | Double Pole |
| 127 | Triple pole |
| 128 | Triple pole and neutral |
| 129 | Supplying and fixing40A to 63A, 240/415 V MCBof Breakingcapacity10kA&Ccharacteristicsondin rail of existing DB’s and necessery connection |
| 130 | Single pole |
| 131 | Double Pole |
| 132 | Triple pole |
| 133 | Four pole |
| 134 | Attending no power complaintsand replacement of MCB/MCCB ( supply not included)of any pole (SP/ DP/TP/ FP) . This includes disconnecting and dismantling the old items and depositing them to store. |
| 135 | Replacement of defective fan ( ceiling / wall) by good one ( supply of fan not included) . This includes disconnecting and dismantling the old & defectiveitems and depositing them to store. |
| 136 | Repairing of defective fanby replacing capacitor/ switch/ regulator and wire etc as required ( supply not included). This includes disconnecting and dismantling the defectiveitems and depositing them to store. |
| 137 | Replacement of defective one switch (6A/16A) /socket (6A/16A) piano or modular type with necessary connection ( supply not included). This includes disconnecting and dismantling the old items and depositing them to store. |
| 138 | Fixing of lamps(Tube, PL,CFL, retrofit LEDetc.) in fitting fixed on wall /ceiling or as desired ( supply not included). |
| 139 | Repairing of all type of light fittings (by replacing driver/holder- supply not included).This includes disconnecting and dismantling the defective items and depositing them to store. |
| 140 | Checking of ceiling fan and its fixing arrangement such as nut, bolt, split pin, rubber bush, clamp etc by lowering the ceiling fan and refixing ceiling fan after replacingthe defectivematerials for ensuring safety including making necessary disconnection and connection. This job includes checking of capacitor and cleaning of fan body and blades properly. (materila supply not included) |
| 141 | Installation of exhaust fan in the existing opening including of all hardwares & making good the damage connection, testing, commissioning etc. complete as required.Upto 450 mm sweep |
| 142 | Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. |
| 143 | Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor complete as required.(For horizontal run). |
| 144 | Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor complete as required. (For vertical run) . |
| 145 | Cleaning and periodical maintenance of electrical distribution panel, panel room. |
| 146 | Supply and fixing 3 mm thick phenolic laminated sheet as per requirement including necessary cutting to fix switch and sockets. |
| 147 | Fixing only starters (for motor control) on flat iron frame/angle iron frame on wall.(upto 15 HP) |
| 148 | Motor starter servicing/repairing contactors are cleaning, tightning of connection,burnt lead replacement as per required. (Materialwill be supplied by the contractor). breakdown attended within 24 hrs. 1.5 to 5 HP Pump Motor Set |
| 149 | Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling. |
| 150 | Supply offollowing class 1, direct mounted digitalEnergy meter with V, I, Kwh, KVAh, Kw, KVA displaywith 5 years warranty including Transparent Hinge type engineering plastic box. Make:Secure/HPL/L&T/Equivalent/ Approve by engineer in charge |
| 151 | 1 Phase (5-30A) |
| 152 | 3 Phase (10-60A). |
| 153 | Installation testing & sealing of single/three phase energy meter with screws & other fixing materials including necy. Connection as required. This job includes dismantling of old/ defective meter and shifting them to site store. |
| 154 | Only checking and sealing of single/three phase meter. |
| 155 | Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit/SP MCB 6-16A, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. painting(b) 250 x 250 x 100mm |
| 156 | Motor with pump set servicing (Exclude the motor winding,pump impeller),overhaul the pump and motor,bearings are checked/cleaned and properly greasing or replaced if required. Any other rectification job has to be done for Centrifugal/Open well Submersible/Turbine Pump with Motor(including transportation charges) as per Annex-1 (Materialwill be supplied by the contractor (exclude motor & pump impeller). In case of occurance of any kind of breakdown attended within 24 hrs.1.5 to 5 HP Pump Motor Set |
| 157 | Overhauling of ceiling fan/wall fan/exhaust fan of any size without supply of bearing. |
| 158 | Supply and fixing 6201 bearing for ceiling fanMake: SKF/FAG/Equivalent/ Approve by engineer in charge |
| 159 | Supply and fixing 6202 bearing for ceiling fanMake: SKF/FAG/Equivalent/ Approve by engineer in charge |
| 160 | Full rewinding of burnt ceiling fan/exhaust fan of any model and make with all required materials for rewinding such as enamelled Grae1 copper wire 30-36 SWG,insulating materials,check-nut,eye bolt,split pin etc.Numberingthe fan like IIT / ESC / 2020-2021 with 6 month guarantee for the following sizes of fans. |
| 161 | Ceiling fan1200/1400 mm sweep |
| 162 | Exhaust fan upto 12 \" Sweep |
| 163 | Exhaust fan upto 18 \" Sweep |
| 164 | SITC of1200 mm sweep, 28W, 220-240 v, 50 Hz, BEE 5 star, 3 blade, airflow - min 220 m/min, 300 rpm Ceiling fan with 300 mmm down road and accessories includingElectronic Regulator conforming to IS:374:2019 latest.Warranty- 02 yearsMake: Bajaj/Orient Electric/ Khaitan /Equivalent/ Approve by engineer in charge |
| 165 | SITC of1400 mm sweep, 28W, 220-240 v, 50 Hz, BEE 5 star, 3 blade, airflow - min 220 m/min, 300 rpm Ceiling fan with 300 mmm down road and accessoriesElectronic Regulator conforming to IS:374:2019 latest.Warranty- 02 yearsMake:Bajaj/Orient Electric/ Khaitan /Equivalent/ Approve by engineer in charge |
| 166 | SITC of 400 mm sweep, 60W, 220-240 v, 50 Hz, BEE 5 star, 3 blade, 3 speed, pull cord control, osscilated type, airflow- min 220 m/min, 1000-1500 rpm plastic Wall fanWarranty-02 yearsMake: Usha/Crompton/Bajaj/ Equivalent/ Approve by engineer in charge |
| 167 | SITC of PVC/Metal Body 220v-240 v, 50 Hz200-300 mm Sweep, 1500 rpm, non capacitor/ Capacitor type Exhaust fan Warranty-02 yearsMake: Usha/Crompton/Bajaj/ Equivalent/ Approve by engineer in charge |
| 168 | SITC of Metal Body 220v-240 v, 50 Hz300-380 mm Sweep, 1500 rpm, non capacitor / Capacitor type Exhaust fan Warranty-02 yearsMake: Usha/Crompton/Bajaj/ Equivalent/ Approve by engineer in charge |
| 169 | SITC of 36-40 watt, 3600 lumen, 6000-6500k, Efficacy >= 100 lm/w,Rated 220v-240v, 2’ x 2’ , Surface/recessed type square LED fittings. Make : Philips/Crompton/Bajaj/wipro/Jaquar/Equivalent/ Approve by engineer in chargewarranty : 05 Years |
| 170 | SITC of 15-18 watt,6000-6500k, Efficacy >= 100 lm/w,Rated 220v-240v,Surface type/ recessed type square or roundLED downlight.Make : Philips/Crompton/Bajaj/wipro/Jaquar/Equivalent/ Approve by engineer in chargewarranty : 05 Years |
| 171 | SITC ofcomplete set of 4 feet, single LED Batten with tube in polycarbonate housing, Alluminium back, SMD LED Chip, 6500 K, 2000 Lumen, Efficacy>=100, Total harmonics<=15%, CRI>=80, PF>0.95, Operating Voltage 110 V- 270 V with EMC, LM79 and LM 80 test report from NABLMake : Philips/Crompton/Bajaj/wipro/Jaquar/Equivalent/ Approve by engineer in chargewarranty : 05 Years |
| 172 | SITCof driver for 2 x2 feet 36W to 40 WLED lights as per site requirement ( Surface or Recessed ). |
| 173 | SITC of driver for 15-18 W LED Downlight as per site requirement ( Surface or Recessed ). |
| 174 | Supply of4Cx 10 Sq mmstranded PVC /XLPE insulatedPVC sheathedGI strip armoured Al conductor cable 650/1100V grade confirming toIS : 7098( part-1). Make : Finolex/Havells/Polycab/KEI/Equivalent/ Approve by engineer in charge |
| 175 | Supply of4Cx 16 Sq mmstranded PVC /XLPE insulatedPVC shathedGI strip armoured Al conductor cable 650/1100V grade confirming toIS : 7098( part-1). Make : Finolex/Havells/Polycab/KEI/Equivalent/ Approve by engineer in charge |
| 176 | Supply of3.5Cx 25 Sq mmstranded PVC /XLPE insulatedPVC shathedGI strip armoured Al conductor cable 650/1100V grade confirming toIS : 7098( part-1). Make : Finolex/Havells/Polycab/KEI/Equivalent/ Approve by engineer in charge |
| 177 | Supply of3.5Cx 35 Sq mmstranded PVC /XLPE insulatedPVC shathedGI strip armoured Al conductor cable 650/1100V grade confirming toIS : 7098( part-1). Make : Finolex/Havells/Polycab/KEI/Equivalent/ Approve by engineer in charge |
| 178 | Supply of3.5Cx 50 Sq mmstranded PVC /XLPE insulatedPVC shathedGI strip armoured Al conductor cable 650/1100V grade confirming toIS : 7098( part-1). Make : Finolex/Havells/Polycab/KEI/Equivalent/ Approve by engineer in charge |
| 179 | Supply of3.5Cx 70 Sq mmstranded PVC /XLPE insulatedPVC shathedGI strip armoured conductor cable 650/1100V grade confirming toIS : 7098( part-1). Make : Finolex/Havells/Polycab/KEI/Equivalent/ Approve by engineer in charge |
| 180 | Supply of3.5Cx 95 Sq mmstranded PVC /XLPE insulatedPVC shathedGI strip armoured conductor cable 650/1100V grade confirming toIS : 7098( part-1). Make : Finolex/Havells/Polycab/KEI/Equivalent/ Approve by engineer in charge |
| 181 | Supply of3.5Cx 120 Sq mmstranded PVC /XLPE insulatedPVC shathedGI strip armoured Al conductor cable 650/1100V grade confirming toIS : 7098( part-1). Make : Finolex/Havells/Polycab/KEI/Equivalent/ Approve by engineer in charge |
| 182 | Supply of3.5Cx 150 Sq mmstranded PVC /XLPE insulatedPVC shathedGI strip armoured Al conductor cable 650/1100V grade confirming toIS : 7098( part-1). Make : Finolex/Havells/Polycab/KEI/Equivalent/ Approve by engineer in charge |
| 183 | Rewinding of Pump Motor with copper winding up to 5HP |
| 184 | SITC of pump motor cuoplerrubber bush |
| 185 | SITC of 415 Volt 3 phase 7.5 HP DOL Starter Make: L&T/North West |
| 186 | SITC of 415 Volt 25A Single Phase Motor Starter Make: North West/ L&T |
