|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. DSR 2.8.1/2023 |
| 2 | Earth work in embankment in ordinary soil loam clay and sand. Earthwork in cutting will be with 1.5m lift and 30cm lead earth for filling will be brought from a distance of 8km including cost of earth, loading, unloading, spreading 20cm layer all complete as per engineer in charge. PWD SOR 2025 |
| 3 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources).DSR 4.1.8/2023 |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand). DSR 6.1.1/2023 |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources). DSR 4.1.4/2023 |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars. DSR 5.22A.1/2023 |
| 7 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). DSR 5.1.2/2023 |
| 8 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to f loor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). DSR 5.2.2/2023 |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete. DSR 5.9.1/2023 |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform. DSR 5.9.3/2023 |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilever.s DSR 5.9.5/2023 |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for LiColumns, Pillars, Piers, Abutments, Posts and Struts. DSR 5.9.9/2023 |
| 13 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand). DSR 6.4.1/2023 |
| 14 | 12 mm cement plaster of mix 1:4 (1 cement: 4 coarse sand). DSR 13.4.1/2023 |
| 15 | 15 mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement: 4 coarse sand). DSR 13.5.1/2023 |
| 16 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. DSR 10.2/2023 |
| 17 | Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, priming coat of approved steel primer, but excluding the cost of other fittings,glass panes complete all as per approved design, (sectional weight of only steel members shall be measured for payment) Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). DSR 10.11.1/2023 |
| 18 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 4.0 mm thick glass panes. DSR 10.3/2023 |
| 19 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm. DSR 11.41.2/2023 |
| 20 | Supply and fixing of 6 mm thick china glaxed tiles of first quality in skirtion or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointion and polishing complete including supply of all materials, labour and %&P etc. required for proper comletion of the work. SOR N0 628/2022 |
| 21 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR 13.80/2023 |
| 22 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats. DSR 13.82/2023 |
| 23 | Painting two coat over priming coat (including cost of priming coat) on wood surface with superior synthetic enamel paint of standared make brushing to give an even shade and finished and including cleaning the surface all dirt dust and other foreign matter sand paparing and stripping including cost matter and scoured with wire brushes fine steel/ wood scrappers sand papering and knotting including coat of all and supply of all materials, labour and T&P etc. required for proper completion of the work. New Item No- 1(b)+2+4(iii)/2022 |
| 24 | Providing and fixing false ceiling at all heights including providing and f ixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and f inishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks). DSR 12.45.1/2023 |
| 25 | Supply and fixing of 32mm thick flush door commercial quality conforming to I.S. 2022 Part I (1983) including fixing of wooden clears and stoppers and including fixing and adjustment of hinges bolts locks handles springs fitting with necessary screws to be supplied. SI No-470/2022 |
| 26 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources). DSR 4.1.3/2023 |
| 27 | Part-B Electrical itemsS/L OF PVC CONDUIT COMPLETE WITH BEND 25MM DIA.SOR NO. 149A/2018 |
| 28 | Wiring point for light with 1.50 Sqmtr F.R PVC insulated multi strand copper conductor cable in PVC conduit pipe partly concealed in the wall complete with 8 SWG GI earth continuity wire,piano type switch &ceiling rose/angle/batten holder on 3 mm. thick phenolic laminated backelite sheet etc.complete in all respect,as directed.including matching colour wash (E/M SI N0-131(c)) 2018 |
| 29 | Wiring point for fan/fresh air fan/light duly exhaust fan with 1.50 Sqmm FR PVC insulated multi strand single core copper conductor cable in PVC conduct pipe .partly concealed in the wall complete with 8 SWG GI earth continuity wire,piano type switch & ceiling rose on 3 mm. thick phenolic laminated backelite sheet etc.complete in all respect,as directed.including matching colour wash (E/M SI N0-133(c))/2018 |
| 30 | Wiring point for Plug with 1.50 Sqmm FR PVC insulated multi strand copper conductor cable in PVC conduct pipe concealed in the wall complete with 8 SWG GI earth continuity wire,piano type switch & socket on 3 mm. thick phenolic laminated backelite sheet etc.complete in all respect,as directed.including matching colour wash. (E/M SI N0-134(c))/2018 |
| 31 | Supply and fixing power plug with 15A/250 volt flush type swich and 5Pin 15A/250 volt flush type universal scoket in suitable MS Box of 175mm x100mmx50mm size with phenolic laminated backlight sheet cover 3mm thick fixed with brass machine screw and cup washer. SOR 1139/2018 |
| 32 | S/Wiring of submain with two number 2.5 sqmm FR but in 20 mm dia heavy duty same as SI 261 (B) PVC insulated multistand copper conductor cable partly concealed in wall and partly laid in slab along with the reinforcement before concreting complete with 8 SWG GI earth continuity wire including matching colour wash ect complete in all respect. (E/M SI N0-261 C)/2018 |
| 33 | S/Wiring of submain with two number 4 sqmm FR PVC insulated 1100 volts grade multistand single core copper conductor cablein 20 mm dia heavy dutyPVC conduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting complete with 8 SWG GI earth continuity wire including matching colour wash ect complete in all respect. (E/M SI N0-262C)/2018 |
| 34 | S&F of 6 Amp to 32 Amp M.C.B.(10K) SOR No 1002/2018 |
| 35 | S&F of 40 Amp S.P. Isolater Cat B,SOR NoE/M SI N0- 1004 (A)2018 |
| 36 | Supply and burying of 40mm dia x 4.5 metres long G.I.Pipe vertically for earthing having 12mm dia. Holesspaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra)upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing. ELEC. SOR 2018 ITEM NO.701/2018 |
| 37 | supply and istalations of daikin 2.00 ton 3 star fixed speed split AC, model no. ftl 50 u cost ( 100% copper ) pm 2.5 air purifine filter all complete. (CB. No.2792/2023 ) |
| 38 | Supply & fixing of LED strip light complete as per design, drawing, specification & as aapproved by Engineer incharge C.B .NO.2792/2023 |
| 39 | Supply & fixing of LED strip light driver complete as per design, drawing, specification & as aapproved by Engineer incharge C.B .NO.2792/2023 |
| 40 | Part-C SaintaryProviding & fixing CPVC pipes having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge. concealed work inc cutting chases and making good the walls etc with 20 mm nominal outer dia pipes as per DSR 2023 item No 18.8.2 as per approved Make |
| 41 | Providing & fixing CPVC pipes having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge. concealed work inc cutting chases and making good the walls etc with 25 mm nominal outer dia pipes as per DSR NO.-18.8.3 /2023 |
| 42 | Providing and fixing white vetreous china pedestal type water closet (European type) with seal and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good thewalls and floors wherever required. W.C. pan with ISi marked white solid plastic seat and lid. SOR 17.3.1/2022 |
| 43 | Providing and fixing white vitreous china wash basin including making all connections but excludinq the cost of fittinqs : Flat back wash basin of size 630x450mm SI.No.(17.25.1) 2023 |
| 44 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required 510x1040 mm bowl depth 250 mm DSR No.17.10.1.1/2023 |
| 45 | Providing and fixing ball valve (brass) of approved quality complete. 15 mm dia. nominal bore. SI.No.(18.18) 2022 |
| 46 | supply of instalation of 50lpm R.O of auqadart make allcomplete MR.BOND NO. 2792/2023 |
| 47 | Providing and placing on terrace (at all floor levels} polyethylene water storage tank ISi: 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. SI.No.(18.48) 2022 |
| 48 | Providing and fixing 110 mm dia P.V.C pipe heavy quality 6kg/sqcm working pressure including supply of all specials clamps with wall cutting etc and other material labour T&P ctc. required for proper completion of the work.As per item No. 730 above but with PVC pipe, 6kg/per sq.cm. pressure 110cm dia.SI.NO-730(A)/2022 |
| 49 | Supply and Fixing Steel jali 100mm round (P.S.R) PMAY |
| 50 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 25 mm nominal bore DSR 18.17.1/2023 |
| 51 | Construction of brick masonary inspection chambers 0.45 m x 0.5m x 0.60m as per standard design with base concrete 1:6:12, 23 cm thick brick wall in 1:6 cement and coarse sand, plastering 1:4 cement and coarse sand with neat finish including RCC cover 8 cm thick including supply of all materials, labour T&P ctc. required for proper completion of the work. DSR-19.30.1/2023 |
| 52 | Providing and fixing C.P. brass angle valve (Kingston, Glacier, Corbat, Allent, Hindware) for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore 15mm nominal bore SOR.NO 18.53.1/2023 |
| 53 | Providing and fixing C.P. brass long body bib cock (Kingston, Glacier, Corbat, Allent, Hindware) of approved quality conforming to IS standards and weighing not less than 690 gms 15 mm nominal bore /SOR (18.51.1/2022) |
| 54 | S/F 100 mm dia Nahani trap India make of approved heavy quality complete with CP brass gratings Nahani trap laid over base ceoment concrete 1:6:12 ISI marked including supply of all materials, labour T&P ctc. Required for proper completion of the work. (P.S.R) |
| 55 | Supply and laying 160mm internal dia P.V.C. Finolex or Jindal make pipe of 10kg/sqcm pressure with all fitting as socket, bend, Tee, Cross etc. complete and including supply of all materials, labour and T&P etc. required for proper completion of the work.(PSR)2723/mda/ee/2022 |
| 56 | One urinal basin with 5 litre white P.V.C. automatic flushinq cistern. SOR 17.4.1/2022 |
| 57 | Providing and fixing gun metal non- return valve of approved quality (screwed end): 40 mm nominal bore DSR-18.19.3.1 Horizontal/2023 |
| 58 | Providing and fixing gun metal non- return valve of approved quality (screwed end): 25 mm nominal bore DSR-18.19.1.1 Horizontal/2023 |
| 59 | Submersible with stator 01 job item (PA Rate of Bond No. 2759/2023) |
| 60 | Singnl phase 10mm Submersible Copper wire (PA Rate of Bond No. 2759/2023) |
| 61 | S/L of 25mm dia heavy guage 16 SWG (2 mm thick) rigid steel sonduit complete with bends and other acessories as required and 14 SWG fish steel wire etc in slab alongwith reinforcement before concreting and plastering etc, complete in all respect. (PWD SI No- 282A)/2018 Ele. Please Enable Macros to View BoQ information |
