Tender For Repair And Maintenance Of Kitanala Dam ( At Ch. K.M.43.30 Of C.L.M.C.), jamshedpur-Jharkhand

Tender For Repair And Maintenance Of Kitanala Dam ( At Ch. K.M.43.30 Of C.L.M.C.)- 1 Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area. By manual means (JH-Common SOR PART A 2.02) 2 Cutting of trees and removal of stumps including backfilling with suitable material.(JH-Common SOR PART A 2.01 A+B) 3 Dismantling of existing structures including stacking of serviceable material with all lift and lead of 1000m (CEMENT CONCRETE ) M15&M20 (JH- Common SOR PART A 2.04 (i)B) 4 Dismantling of existing structures including stacking of serviceable material with all lift and lead of 1000m (BRICKWORK IN CEMENT MORTAR ) (JH- Common SOR PART A 2.04 (ii)B) 5 Earth work in excavation of foundation trenches as per designed section in all kinds of soil, including mooram soil.(JH-WRD 5.1.8) 6 E/w in dam fill in semi pervious or impervious zone excavation by hydraulic excavator and carriage by tipper truck making dam in proper design section including earth to be laid in layers of not more than 225mm thick and breaking of clods to maximum 63mm cube with lifts including construction and maintenance of haul road etc. all complete as per specification and direction of E/I LEAD 3KM (JH-WRD 5.1.22) 7 Supplying and laying 300mm thick humous layer on slopes of dam with manual compaction and turfing the surface with approved dub grass with 1km lead including watering and ramming till growth of grass all complete as per specification and direction of E/I (JH-WRD 5.1.37) 8 P/v Coarse clean sand filling in filling in foundation trenches or plinth including ramming and watering in layers not exceeding 150mm thick with all lift and lead …do….do..all complete as per specification and direction of E/I (JH-Common SOR PART A 5.4) 9 Supplying and laying gravel filter (size 5mm to 15mm) in toe drain (in horizontal portion) of dam as per design excluding cost of carriage all complete as per specification and direction of E/I (JH-WRD 5.6.2) 10 Supplying and laying boulder in toe drain (in horizontal portion) of dam as per design excluding cost of carriage all complete as per specification and direction of E/I (JH-WRD 5.6.4) 11 Providing designation of 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per specification and direction of E/I (JH-BCD 5.6.3) 12 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1cement : 2 coarse sand (zone-II) : 4 graded stone aggregate 20mm nominal size) (JH-BCD 5.3.1.2) 13 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1.5:3 (1cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20mm nominal size) (JH-BCD 5.3.1.1) 14 Supplying and laying properly as per design and drawing rip rap with good quality of boulders duly packed including the cost of material, royalty all taxes etc but excluding the cost of carriage all complete as per specification and direction of E/I (JH-Common SOR PART A 6.8) 15 Providing designation 75B brick work in C.M (1:6 ) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I.(JH-BCD-5.2.6) 16 Making 25cm (10) dia bore upto 4 M depth below ground with hand auger of approved quality in ordinary soil (vide classification of soil item-A) true to plumb and without eccentricity in any stage of operation and disposal of the excavated earth upto 50 M lead including all lifts, all complete as per approved design and direction of E/I.(JH-BCD-5.1.3) 17 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. (1:1.5:3) (JH-BCD 5.3.9.1) 18 providing Tor steel reinforcement of as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (JH-BCD-5.5) 8 mm dia bars 19 12 mm dia bars 20 Centering and shuttering including strutting, propping etc. and removal of form for wall 21 column 22 pcc road 23 lintel 24 Providing 12mm cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. (JH-Common SOR PART A 3.2) 25 Providing 1.5mm cement punning including curing, carriage of water with all leads and lift as per building specification and direction of E/I. (JH-BCD 5.7.11) 26 Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.(JH-BCD 5.8.21) 27 Supplying, fitting and fixing M.S. grill gate with M.S. grill made of 20X6mm M.S. flats or 16mm M.S. square bars fitted on 25X25X6mm M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.(JH-BCD 5.5.30) 28 Providing two coat of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.(JH-BCD 5.8.43) 29 Steelwork in built up tubular (round,square or rectangular hollow tubes etc.) trusses etc, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc complete. hot finished welded type tubes. (DSR 10.16.1) 30 P/F precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by E/I) 0.50mm (+.0.05%) total coated thickness with zinc coated 120gm per sqm as per IS 277 in 240MPA grade steel 5-7mm epoxy primer on both sides of the sheet and polyster top coat 15-18 microns ...do....do.... excluding the cost of purlins ,rafters and trusses and including cutting to size and shape wherever required.(DSR 12.50) 31 Carriage of materials from quarry to work site at KITANALA DAM @KM 43.3 of CLMC including cost of loading, unloading and staking- Cement 32 Carriage of materials from quarry to work site at KITANALA DAM @KM 43.3 of CLMC including cost of loading, unloading and staking- Sand 33 Carriage of materials from quarry to work site at KITANALA DAM @KM 43.3 of CLMC including cost of loading, unloading and staking- Stone chips 34 Carriage of materials from quarry to work site at KITANALA DAM @KM 43.3 of CLMC including cost of loading, unloading and staking- Boulders 35 Carriage of materials from quarry to work site at KITANALA DAM @KM 43.3 of CLMC including cost of loading, unloading and staking- Bricks 36 Add GST @18% 37 Add Labour Cess @1% Please Enable Macros to View BoQ information

INR 10000 /-

INR 1 Crore /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB