|
| 1 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 2 | M & L for 25 mm thick, plain cement concrete 1:2:4,type B-0 (using 12.5 mm graded stone aggregate)as in sub-base of flooring, etc and finished the surface even and rough complete all as specified and directed. |
| 3 | M&L Non-Skid Ceramic Coloured Tiles 7.0mm to 8.0mm thick (Rectangular/ Square), Area of Each Tile exc. 0.18 Sqm but not exc. 0.38 Sqm (1st quality as approved) in Floors, Jointed in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed.NOTE : Cost ofScreed Bed will deemed to be included in the Quoted Unit Rate. |
| 4 | Non Skid colouredceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchfixed over and including 15mm thick screed bed in CM 1:6 complete all as specified and as dircted |
| 5 | M&L Coloured Glazed Ceramic Tiles 300x200x7.0mm thick (1st quality as approved) in Vertical Surfaces i.e. Dado, Skirting, etc., set in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile fixing over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and as directed.NOTE : Cost ofScreed Bed will deemed to be included in the Quoted Unit Rate. |
| 6 | Dismantling of wall and ceiling boards (fibre, pulp, insulation) or insulation boards, bonded wool, blanket slab incl aluminium grid frame work complete all as specified and as directed |
| 7 | S&F Hangers 4mm dia G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long sizeof grid 605 x 605mm complete all as specified and as directed |
| 8 | S&F anodised aluminium snap grid frame work for false ceiling of size of grid 605x605 mm. |
| 9 | S&F HSPC Non-Asbestos Fibre Cement Building Boards 4.0mm thick in Ceiling, Pre-primed, Self Embossed, Textured Designer Boards, Water Resistant, Termite Resistant, Fire Resistant for insulation, fixed or laid/ inserted to Aluminum Snap Grid Frame Work with Screws, complete all as specified and as directed. |
| 10 | Taking down Shutter of any description,exc 1.00sqm but not exc. 2.00 Square Metre Each, complete all as specified and as directed. |
| 11 | S&F Factory Made Solid Panel PVC Door Shutter 30mm thick (Style) consisting of Frame made out of Mild Steel Tubes for Top & Bottom Rails, Mild SteelFrame shall be covered with Heat Moulded Plain Color PVC ‘C’ Channel having a PVC Strip of 20mm width stuck inside with Solvent Cement for Stiles & Plain color PVC Sheets for Top Rail, Lock Rail & Bottom Rail on Either Side & Gap insert for Top Rail & Bottom Rail, Paneling of Plain Color PVC sheet to be fitted in the Mild Steel Frame, welded/sealed to the Stiles & Rails with suitable PVC Sheet Beading & jointed together with Solvent Cement, complete all as specified and as directed.NOTE : Builders Hardware will be Measured and Paid seperately under appropriate Items. |
| 12 | S&F Aluminium anodised Barrel Tower Bolt, 125mm long (as approved), Extruded Section, complete all as specified and as directed. |
| 13 | S&F Stainless Steel Butt Hinge 75mm in size (as approved), complete all as specified and as directed. |
| 14 | S&F Aluminium Handle 125mm in size (as approved), anodised, Cast type, complete all as specified and as directed. |
| 15 | Taking down shutter of any description but exc 2 sqm each, complete all as specified and as directed. |
| 16 | S&F Flush Shutter 30mm thick, Solid Core Construction, with Block Board Core and Plywood Face Panels, Commercial type on Both Sides including Teakwood Lipping 6.0mm thick, fixed with Nails, complete all as specified and as directed. |
| 17 | S&F Aluminium anodised Barrel Tower Bolt, 150mm long, Extruded Section, complete all as specified and as directed. |
| 18 | S&F Aluminium alloy, anodized, Sliding Door Bolt 300mm long with Hasp Staple (Bolt type) and Fixing Clips of Sheet, Cast or Extruded Section and fixing Bolts and Sliding Bolts of Extruded Section and Fixed-in-repairs, complete all as specified and as directed. |
| 19 | S&F Stainless Steel Butt Hinge 100mm in Size, complete all as specified and as directed. |
| 20 | S&F Aluminium Handle 150mm, Cast type, anodised, complete all as specified and as directed. |
| 21 | S&F Floor Door Stopper having Overall length of Cover Plate 140mm of Aluminium Alloy Body and Tongue, anodised, with Hard Drawn Steel Spring, fixed in Floor and Fixing-in-repairs, complete all as specified and as directed. |
| 22 | M&Lfor preparation of new painted surfaces of wood or wood based surfaces of any description exc 10 cmwidth or girth and applyingtwo coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 23 | S&F Vitreous China White Wash Hand Basin with pedestal of size 550x400mm, White (Flat Back) including Brass Chromium plated Waste Fitting 32mm bore (dia), PVC Waste Pipe 32mm/40mm and a Pair of Cast Iron Brackets or Erecting Stand duly Painted (but excluding Taps, Chain, Plug & Porcelain Stopper), Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed. |
| 24 | S & Fin repairs 600mmx450 mm bevellled edgemirrorofselectedqualityglasss, mountedon 6 mm thick commercialplywoodandfixedtowoodenplugswithchormiumplatedbrass screwsandcup washers complete all as specified. |
| 25 | S&F Vitreous China White Wash Down Water Closet Pan (Pedestal Pattern) with PVC (SWR) ‘P’ or ‘S’ Trap, and Fixing Bolts and Making Good to Floor/ Distrubed Surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed. |
| 26 | S&F PVC Flushing Cistern 10 LITRE capacity White, Low Level, Valveless, Syphonic Action type, Dual Flush ISI Marked (IS:7231) with Inlet, Ball Valve, Float and Handle, a Pair of Cast Iron Brackets Erecting Stand duly Painted, including PVC Flush Pipe 32mm dia with PVC Long Bend, Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed. |
| 27 | S&F Bib Tap 15mm bore (dia) Cast Copper alloy, Chromium Plated, Fancy type with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule and Fixed-in-repairs, complete all as specified and as directed. |
| 28 | S&F Pillar Tap 15mm bore (dia), Cast Copper alloy with Capstan Heads, Chromium Plated, Fancy type, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed. |
| 29 | Supply and fix in repairs stop / Angle valvescast copper alloy, screwed down high pressure with capastan headscrewed both ends 15 mm bore fancy type chromium plated with long shank and cup suitablecomplete all as specified and as directed. |
| 30 | S &FPVC connection15 mmboreand45 to 60 cmlongall asspecifiedandasdirtected. |
| 31 | Taking down steel tubing 15 mm bore and connections and removal to store. |
| 32 | S&F Galvanised Steel Tubing 15mm bore (dia), medium grade, conforming to IS-1239 with all Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed. |
| 33 | M&L Re-fixing Old Steel Tubing 15mm bore (dia) and Connections (Serviceable Pipes and Connections obtained from Item No. 1.015 here-in-before) in New or Old Position (Walls, Ceiling, Floors, etc.) including Cleaning both Inner and Outer Surfaces of Pipes by using Wire Brush before fixing/ laying including Provision of New GI Fittings/ Connections (as required ordered at Sites), complete all as specified and as directed. |
| 34 | Taking down steel tubing 20 mm bore and connections and removal to store. |
| 35 | S&F Galvanised Steel Tubing 20mm bore (dia), medium grade, conforming to IS-1239 with all Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed. |
| 36 | M&L Re-fixing Old Steel Tubing 20mm bore (dia) and Connections (Serviceable Pipes and Connections obtained from Item No. 1.016 here-in-before) in New or Old Position (Walls, Ceiling, Floors, etc.) including Cleaning both Inner and Outer Surfaces of Pipes by using Wire Brush before fixing/ laying including Provision of New GI Fittings/ Connections (as required ordered at Sites), complete all as specified and as directed. |
| 37 | Dismantling existing water storagetanks 500 litres capacity and removal from site complete all as specified. |
| 38 | Dismantling existing water storagetanks exc 500 litres but n.exc 1000 litres capacity and removal from site complete all as specified. |
| 39 | 1000 litres capacilty, roational moulded polythylene water storage tank double layered (cylindrical vertical with closed top) hoisted and fixed in position including GI tank nipple & with union (two Nos each) fittings and making necessary connections to make the tank functional complete all as specified and directed. |
| 40 | 500 litres capacilty, roational moulded polythylene water storage tank double layered (cylindrical vertical with closed top) hoisted and fixed in position including GI tank nipple & with union (two Nos each) fittings and making necessary connections to make the tank functional complete all as specified and directed. |
| 41 | S&F Gun metal globe or gate valves with iron wheel head, screwed both 20 mm bore in repairs. |
| 42 | S&F Toitet Paper Holder, Vitreous China, Coloured, Box type of approved Size with Brass Chromoum Plated with Rod to hold Paper Roll, fixed to Walls with Brass Chromium plated Screws and Fixed-in-repairs, complete all as specified and as directed |
| 43 | S&F Hand Shower (Health Faucet) with Inner Flexible Tube not less than 1.20 Metre in Length and Wall Hook, Fixed-in-repairs, complete all as specified and as directed.MAKE : JAQUAR ALD-CHR-593 or equivalent Model in Make : GEM/ KOHLAR/ MARC (as approved by GE) |
| 44 | S&F Tubular Towel Rail 20mm dia, Brass Chromium Plated, D-type, 60 Cm long between Flanges with Bracket (One Pair), fixing to Walls with and including Chromium plated Brass Screws and Wooden/ Plastic Cleats and Fixing-in-repairs, complete all as specified and as directed. |
| 45 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 46 | S&F Steel work in (sqare/ Rectangle) tubular trusses, rafter, purlins, post etcincluding special shaped washer etc.complete using ERW or induction butt welded tubes conforming toAFe- 290 (Gde E- 165) complete all as specified and directed. |
| 47 | M&L for preparation of old steel surface of any description over 10 cm in width or girth,not otherwise described and applying one coat of synthetic enamel paint all as specified and directed. |
| 48 | M & L for Preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zine chrome primer complete all as specified and directed. |
| 49 | Dismantling plain or corrugated steel sheeting, any gauge, thickness including nainital or similar pattern roof coverings any thickness |
| 50 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 51 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges/roof covering/cladding to wall, fixed with self tapping screws as specifiedspecified and as directed. |
| 52 | Demolition of brick work or stone masonry or PCC block manonry built in cement mortar including all quoins, pillars, arches etc. |
| 53 | M&L precast cement concrete block masonry with solid block, type C-1,1:3:6 mix( using 20mm graded aggregate ), exc 10cm in width and setting in cement mortar 1:6 complete all as specified and directed. |
| 54 | M & L for Providing Pre-cast cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar, complete, in walls in width and setting in mortar 1:6 complete all as specified and directed. |
| 55 | M & L rendering 10mm thick on brick wall or concrete surface in cement mortar 1:6 finished fair and even complete all as specified. |
| 56 | Taking down cement plaster of any description including racking out joints, hacking for keys , scrubing down with water etc complete all as specified. |
| 57 | M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in cm 1:4 finished even and smooth without using extra cement, complete all as specified & directed |
| 58 | Supply only Water Proofing Compound (as approved), conforming to IS:2645-2003, complete all as specified and as directed. |
| 59 | M & L applying two coats of distemper oil emulsion paint over a coat of Chalk whiting, on plastered surfaces, preparatory to distempering over a coat of 3mm thick wall care putty on new or undecorated wall surface including preparation ofsurfaces complete all as specified. |
| 60 | M&L for preparation of new plastered surfaces of walls and applying two coat of cement based paint overa coat of alkal resistant primer complete all as specified & directed |
| 61 | M&L Preparing Old Painted Asbestos Cement Building Boards Panel Surfaces of any description, over 10 Cm in Width or Girth and applying One Coat of Cement Base Paint (as approved Tint), complete all as specified and as directed. |
| 62 | M&L Preparing Old Distempered and Painted Surfaces of Walls by Washing, Rubbing down and Stopping of Surfaces and applying One Coat of Distemper Oil Emulsion (as approved Tint), complete all as specified and as directed. |
| 63 | M&L Preparing Old Painted Wooden Surfaces of any description, exc. 10 Cm in Width or Girth and Applying One Coat of Synthetic Enamel Paint (1st quality Paint of approved Tint), complete all as specified and as directed. |
| 64 | M&L Preparing Old Painted Asbestos Cement Building Boards Panel Surfaces of any description, over 10 Cm in Width or Girth and applying One Coat of Synthetic Enamel Paint (1st quality/ grade Paint of as approved Tint), complete all as specified and as directed. |
