Tender For Upgradation Of Sowa Rigpa Educational Institute At Nit Deorali, Sikkim., Gangtok-Sikkim

TDR : 52586593

Tender Notice
BOQ

20 Days Left

Gangtok , Sikkim

Tender Brief : Tender For Upgradation Of Sowa Rigpa Educational Institute At Nit Deorali, Sikkim.

Document Fees
₹ 100000 /-

EMD
₹ 1609861.0 /-

Tender Value
₹ 6.43 Crore /-

Submission Date
03-01-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	(A) : PHC Building
2	Excavation in soil in hilly area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth lift all complete.
3	Earth in excavation in mixed soil in foundation trenches i/c dressing of sides, disposal of excavated earth upto 30m lead and 1.5m lift all complete.
4	P/L hand packed stone soling with clean, hard selected stones all complete.
5	Providing & Layingin position cement concrete of 1:3:6 mix.(1 cement, 3 coarse sand, 6 graded stone aggregate of 20mm & down size)
6	Filling inside plinth in building works with 23 cm layers, consolidated to 15cm including watering, ramming etc. all complete.
7	Providing and Laying damp proof coarse 40 mm thick with cement concrete 1:2:4 ( 1 cement, 2 Clean coarse sand, 4 graded stone aggregate 12.5 mm & nominal size) as per the direction of Engineer in Charge.
8	Providing and laying. coarse Rubble Stone Masonry with hammer dressed clean hard selected stone in 1:3:6c.c. (1 cement, 3 sand, 8 clean hard graded stone ships of size 40mm) including bond stone, through stone of size 150mm x 150mm x 450mm manufactured in 1:4:8 (1cement, 4 clean coarse sand, 8 clean hard stone aggregate of size 40 mm and down)and curing etc, complete as per the direction of Engineer in Charge excluding the cost of carriage of materials.
9	Providing and Laying Plum concrete in 1:2:4 c.c. (1cement, 2coarse sand, 4clean hard graded stone chips of 20 mm down nominal gauge) with 50% cleanhard stone of sizes not exceeding 15cm including shuttering, compacting and curing complete, as per the direction ofEngineer in Charge.
10	Providing and Laying in position 1:1:2 Mix (1cement, 1 coarse sand 2 graded stone aggregate 20mm and down nominal gauge) of reinforced cement concrete excluding the cost of form work, finishing and reinforcements.
11	Providing, fixing & removing form works for casting of R.C.C items all complete.
12	Foundation Base
13	Columns
14	Beams
15	Slab
16	S/B/B in position tor steel and mild steel reinforcements in all R.C.C works i/c cost of binding wires etc all complete.
17	Providing and Laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1 cement and 4 coarse sand) as per the direction of Engineer in Charge includingcuring etc all complete.
18	P/L 15mm thick cement plasters in 1:3 mix c.m i/c curing etc all complete.
19	Providing and Laying white or colored glazed vitrified tiles Pearl (white, marvel Atlanta, jet black etc or equivalent) in flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry.
20	Providing and Laying white or colored glazed tilesanti skid ( elegant, cashmere, Egyptian rustic, celebrity, lara etc or equivalent) of glossy series or celebrity, elegant or equivalentin flooring, treads of steps landing etc of size 300mm x 300mm laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry.
21	Providing and Laying white or colored or ceramic glazed tiles of size 200mm x 300mm Special colour(black, burgundy, pink, midnight blue, alpine blueor equivalent) in skirting, risers of steps and Dados on 12mm thick cement plaster (1cement, 3coarsed sand) 1:3 bare and jointed with white cement slurry.
22	Providing and Laying 20mm thick granite stone in Risers of steps, skirting and pads, walls, pillars etc laid on 10mm thick base c.m. 1:3 joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete.
23	Providing, fitting and fixing of dressed sal timberin all types of frames complete With imported timber from outside the state
24	Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)
25	Providing hold fast of (40x5)mm flat iron including fixing to frame with 10mm dia. Bolts nuts and timber plugs and embedding in CC 1:3:6 ( 1 cement, 3 coarse sand, 6 graded stone aggregate 2omm nominal size) block of size (30x10x15)cm. as per the direction of Engineer - in- Chargeall complete:
26	Providing fitting and fixing water proof flush doors shutters, solid block hard core construction with frame of 1st class hard timber, with well matched 3mm commercial ply (both faces) including hinges with screws complete.
27	Providing and fixing Brass bright finished butt hinges with necessary screws etc. complete.
28	Providing, fitting and fixing. sliding door bolts with nuts and screws etc. complete.M.S (Oxidized)
29	Providing and fixing 100mm mortise lock with 6 levers and pair of handles with necessary screws etc complete.MS.
30	Providing and fixing Tower bolt 200x100mm with necessary screws etc complete.Brass (copper oxidized)
31	Providing and laying plaster of paris putty of 2mm thick over plastered surface to prepare the surface even and smooth all complete:
32	Providing and Providing and painting with plastic Emulsion paints two or more coats on New surface of required shade to give an even shade including brushing the surface clean of all dirt dust and smoothened by sand paper etc complete.
33	Providing and Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL, WEATHER SHIELD to give an even shade including brushing the surface clean of dirt, dust etc and sand papering and filling the scratches complete on New surface.
34	Providing and French spirit polishing two or more coats including cleaning of the surface of dirt and dust papered smooth etc on new surface complete.
35	Supplying, fabricating, fitting and fixing tubular truss including putty, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shape washer etc complete in curve shaped Sikkim-style roofing as per the standard specification and design and as per the direction of Engineer - in- Chargeall complete.
36	Providing, fitting, fixing of 24 BWGGP sheet roofing by making corrugation of50mmx50mm x50mm on bothside with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with white bad including coat of approved steel primer and two coats of approved paint, on overlapping of sheet excluding carriage all complete.
37	Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG Pre-painted HULASSheet fixed with G.I, J or L hooks bolts and nuts 8mm dia Limpets, Bitumen washers complete.
38	Providing, fitting and fixing 23cm deep 24BWG Pre-painted HULAS. sheet eaves board including (50mmx25mm) dressed sal timber beading and M.S. Rod brackets all complete.
39	Providing and fixing 15cm wide 45cm overall semicircular G.P sheet (Class I) gutter with iron brackets 40x3mm size, bolts, nuts, washers etc including making, connection with rain water pipes.
40	Providing and fixing M.S round or square bars at required spacing in timber frames of windows as per the direction of Engineer - in- Chargeall complete.
41	stair case railing
42	outdoor column
43	Providing and applying priming coat with ready mixed Red oxide, Zinc chromate primer on steel / galvanized Iron steel works including preparation of the surface complete.
44	Providing and painting with ready mixedpaint of approved quality and shade with two or more coats to give an even and smooth shade including clearing the surface complete on new surface.
45	Providing box drain of 60 cm (ht) x 45 cm (width) of internal dimension with 1:2:4 Plum concrete (40mm & down) side wall thickness of 23 cm (hill side) and 30 cm (road side) with1:3:6 (20 mm & down) base concrete of thickness of 15 cmwith standard specification over 15 cm stone soling including providing & laying guard stones, complete as per the direction of theEngineer-in-Charge.
46	Providing / Fitting / Fixing in position suspended exposed grid false ceiling using E-Board pearl (tested for inflammability as per IS 11871)& E- Grid of grid size 1200 x 600 x/600 x 600 mm with main runners 39 x 24.7 mm cross Tee 29 x 24.7mm and wall angle 22.2 x 22.2 mmplacing 4mm thick E-Boardpearl in the grid of E-Grid duly suspended with 4mm dia GI barshangers fixed with tee dash fastener of fro purlin of the roof with butterfly clips & hold down clips, providing provision for light fixtures air conditioning diffuser and ducts, sprinklers, smoke, detectorsi/c paintings water based acrylic cement primer etc all complete:
47	Providing and fixing anodized aluminum works for doors, windows, ventilators and partitions with extruded built up standard tubular or other section of approved make confirming IS 733 and IS 1285, fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners i/c necessary filling up the gaps at junctions, at top, bottom and sides with required PVC / neoprene felt, etc. Al. section shall be smooth, rust free, straight, mitered and joined mechanically wherever required i/c cleat angle, Al snap beading for glazing / paneling CP brass / stainless screws,all complete as per design and drawings and the direction of the Engineer - in - Charge.
48	Providing and fixing prelaminated sheet three layer medium density (exterior grade) particle board grade - I type - II confirming IS 12823 bonded with phenol formaldehyde synthetic resin of approved brand and manufacture in panelling fixed in Aluminium doors, wndows, shutters and partition frames with CP brass / stain less steel screws etc. complete as per architectural drawings and direction of Engineer - in- Charge.
49	Stone tile 8mm thick (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete.
50	Providing, fitting and fixing of dressed local timber (tooni, katus equivalent) in all types of frames complete.
51	Providing, fitting and fixing 38mm flooring in sal timber over a frame of sal timber excluding the cost of polishingand including cost of one coat priming on the base frame complete.
52	Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment,wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical specifications
53	Cost of Haulage Excluding Loading and Unloading of stock material within 100 kmfrom Siliguri to Gangtok all complete.
54	Loading and Unloading of Cement or Steel by Manual Means and Stacking.
55	Cost of Haulage Excluding Loading and Unloading of Sand within 50 km all complete.
56	Cost of Haulage Excluding Loading and Unloading of Stone chips within 50 km all complete.
57	Cost of Haulage Excluding Loading and Unloading of Stone within 50 km all complete.
58	Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum.
59	Haulage for throwing away of excavated earth via Surfaced Road for the distance of 20 km excluding loading and unloading all complete.
60	(B) : INTERNAL AND EXTERNAL ELECTRIFICATION
61	(I) Wiring With PVC Insulated (HR FRLS) Copper Conductor SingleCore Cable in Best Quality Recessed Alathine Pipe.
62	Wiring for light/Fan/Call bell & 6 A plug point with 2x1.5 sqmmFRLSHPVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with 1x 1.5 sqmmHR FRLS PVC insulated copper conductor single core cable as required.
63	Wiring for 16 A plug point with 2x 2.5 sqmmFRLSH PVC insulated copper conductor single core cable in best quality recessed alkathine pipeand earthing the point with 1x 2.5 sqmmFRLSH PVC insulated copper conductor single core cable as required.
64	Wiring for sub-main for light/fan/call bell & 6 amps plug points with 2x 2.5 sqmmFRLSH PVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with 1x2.5 sqmm FRLSH PVC insulated copper conductor single core cable as required.
65	Wiring for sub-main for 25 amps (2x1000W) plug points with 2x4.0 sqmm FRLSHPVC insulated copper conductor single core cable in best quality recessed alkathine pipeand earthing the point with 1x4.0 sqmm FRLSH PVC insulated copper conductor single core cable as required.
66	(ii)Switch, Socket and Accessories .
67	Supplying & fixing 06 amps 1 way FT switch on white moduler plate and metal flux box including connection etc. as required.
68	(a)1 no. 06 amps FT switch with 1 no white 1 moduler plate and 1 moduler metal flux box
69	(b)2 no. 06 amps FT switch with 1 no white 2 moduler plate and 2 moduler metal flux box.
70	(c)3 no. 06 amps FT switch with 1 no white 3 moduler plate and 3 moduler metal flux box.
71	(d)4 no. 06 amps FT switch with 1 no white 4 moduler plate and 4 moduler metal flux box.
72	(d)6 no. 06 amps FT switch with 1 no white 6 moduler plate and 6 moduler metal flux box.
73	(d)8 no. 06 amps FT switch with 1 no white 8 moduler plate and 8 moduler metal flux box.
74	Supplying & fixing 1 no. 2 way switch with 1 no 1module white plate & 1 no 1 module metal flux box including connection etc. as required.
75	Supplying & fixing 1 no. fan step regulator 120 watts, 1 no. white plate (2 module) and 1 no. (2 module) metal flux box including connection etc. as required.
76	Supplying & fixing Metal plug & socket DB\"s 63A FP 3P+N+ E
77	Supplying & fixing Metal plug & socket DB\"s 32A DP+E
78	Supplying & fixing 1no. 25 amps socket & 1 no. 25 amps switch with 1 no, 3 module white plate & 1 no. 3 module metal flush box including connection etc. as required.
79	Supplying & fixing 1 no. 16 amps socket, & 16 amps switch,white plate (3 module) & Metal flux box (3 module)includingconnection etc. as required.
80	Supplying & fixing 2 no. 16 amps socket, & 2 no.16 amps switch,white plate (6 module) & Metal flux box (6 module)includingconnection etc. as required.
81	Supplying & fixing 1 no. 06 amps socket with 1no. 06 amps switch, 1 no. 3 module white plate & 1 no. 3 module metal flux box ) including connection etc. as required.
82	Supplying & fixing 2 no. 06 amps socket & 2 no. 06 amps switch with 1 no, 6 module white plate & 1 no. 6 module metal flush boxincluding connection etc. as required.
83	Supplying & fixing 1 no RJ45 data socket with 1 no, 1 module white plate & 1 no. 1 module metal flush box including connection etc. as required.
84	Supplying & fixing 2 no RJ45 data socket with 1 no,2 module white plate & 1no.2 module metal flush box including connection etc. as required.
85	Supplying & fixing 1 no RJ11 tele socket with 1 no, 1 module white plate & 1 no. 1 module metal flush box including connection etc. as required.
86	Supplying & fixing 1 no RJ-45 datasocket plus 1 no RJ-11 with 1 no,2 module white plate & 1 no. 2 module metal flush box including connection etc. as required.
87	Supplying & fixing 1 no HDMI data socket plus 1 no RJ-45 data socket with 1 no, 2 module white plate & 1 no. 2 module metal flush box including connection etc. as required.
88	(iii)Light Fitting & Accessories.
89	Supplying & fixing recessed mounted LED panel light fitting 2ft x 2ft 36 wattsincluding connection etc. as required.
90	Supplying & fixing surfaced LED fitting 20 wattsincluding connection etc. as required.
91	Supplying & fixing recessed LED fitting 20 wattsincluding connection etc. as required.
92	Supplying & fixing surface LED fitting 12 wattsincluding connection etc. as required.
93	Supplying & fixingCeiling Fan 1200mmwith complete accessories including connection as required.
94	Supplying & fixing Angle/Batten holder with 9 watts LED lampincluding connection etc. as required.
95	Supplying & fixing LED wall mounting mirror light including connection etc. as required.
96	Supplying, Installation, testing & commissioning of ventilating fan 250mmincluding connection as required.
97	Supplying, Installation, testing & commissioning of ceiling mounted ventilating fan including connection as required.
98	(iv)Earthing and Lightning Conductor..
99	Supply, Installation, Testing and Commissioning of GI Chemical earthing electrode, cristiline conducting material filled, 2Mtr. long PIP technologyinner dia 42.2mm & outer da 76.2mm,placed with 50 Kg. back filled compound mixed with equal quantity of black garden soil replacing the excavated earth including excavation in any kind of soil complete in all respect. Earth pit cover (High grade PVC, Circular, high compressive strength, impact resistant and high heat resistant)
100	Supply errection testing and commissioning of conventional solid copper air terminal prong 1.5 mtrs long, with threaded type copper ball, finials and base plate complete in all respect.
101	Supply & layingof Copper / GI / Aluminium earthing strips for connecting the earthing electrodes with the electrical installations / systems / distribution boxes etc,with all fixing accessorieson and placing walls / trenches / ceiling / directly burried in earth as per specification and requirement. All earth strips burried in eatrh will be provided with protective non bio degradable PVC sleevesaccording to the size of conductor. Test certificate of all kind of strips shall be produced by the vendor during supply.
102	50 x 6 mm G I hot deep galvanised strip 80-100 microne
103	40 x 6 mm GI hot deep galvanised strip 80-100 microne
104	25 x 6mm GI hot deep galvanised strip 80-100 microne
105	10 SWG CU WIRE
106	Earth pit cover (High grade PVC, Circular, high compressive strength, impact resistant and high heat resistant)
107	(v)Panels and Distribution boxes
108	Supplying & installation testing and commissioning of MCCB/MCB distribution board Double Door/Single door(CONFORMING TO CPWD /NBC/ Relevant IS & BIS Code)
109	Vertical TPN DB 4 way MCCB)
110	TPN DB 8 way
111	TPN DB 6 way
112	TPN DB 4 way
113	TPN DB 16 way
114	TPN DB 12 way
115	Supplying, installation, testing & commissioning ofResidual current circuit breaker(CONFORMING TO CPWD /NBC/ Relevant IS & BIS Code)
116	Double pole 25 Amps
117	Four pole 25 Amps
118	Four pole 40 Amps
119	Four pole 63 Amps
120	Supplying and fixing following rating, double pole, Residual Current Breaker with Over-Current, 240 V, having a sensitive current 30mA in the existing DB complete with connections, testing and commissioning etc. as required
121	Four pole16 Amps
122	Four pole32 Amps
123	Supplying, installation, testing & commissioning ofMiniature circuit breaker (CONFORMING TO CPWD /NBC/ Relevant IS & BIS Code)
124	Single pole 10 Amps
125	Single pole 16 Amps
126	Single pole 25 Amps
127	Double pole 25Amps
128	Double pole 32Amps
129	Double pole 63Amps
130	Triple pole 16 Amps
131	Triple pole 32 Amps
132	Triple pole 63 Amps
133	Four pole 25 Amps
134	Four pole 32 Amps
135	Four pole 40 Amps
136	Four pole 63 Amps
137	(vi)Laying of 1.1 kv Grade Cables..
138	Providing & laying 1.1 KV grade XLPE insulated aluminium armoured conductor cable on surface of the wall of building with required size of aluminium shadle and screw etc. as required.
139	3.5 Core 120 Sqmm Cable
140	3.5 Core 25 Sqmm Cable
141	4 Core 16 Sqmm Cable
142	Providing & laying 1.1 KV grade XLPE insulated copper armoured conductor cable on surface of the wall of building with required size of aluminium shadle and screw etc. as required.
143	4 Core 4 Sqmm Cable Cu Ar
144	4 Core 6 Sqmm Cable Cu Ar
145	3 Core 4 Sqmm Cable (Un Ar)
146	Termination of cable 3.5 core / 4 core armoured Aluminium cable with required aluminium lugs and compression glands for each end complete in all respect including connection.
147	3.5 Core 120 Sqmm Cable
148	3.5 Core 25 Sqmm Cable
149	4 Core 16 Sqmm Cable
150	Termination of cable 3 core / 4 core armoured copper cable with required copper lugs and compression glands for each end complete in all respect including connection.
151	4 Core 4 Sqmm Cable Cu Ar
152	4 Core 6 Sqmm Cable Cu Ar
153	3 Core 4.0 Sqmm Cable(Un Ar)
154	(vii)Main panels.
155	MAIN LT CUM DG AMF CONTROLLER PANEL Incomer: 320A 4 Pole 36kA MCCB with Microprocessor Based with O/C, S/C, E/FRelease-1No., 320A 4 Pole 36kA MCCB with Microprocessor Based with O/C, S/C, E/FRelease-1No. Outgoing Feeder: 63A 4Pole 10kA MCB -10nos.,40A 4Pole 10kA MCB- 2nos.,32A 4Pole 10kA MCB- 2nos., 25A 4Pole 10kA MCB-16nos. 25A 2Pole 10kA MCB-06nos.,32A 2Pole 10kA MCB-03nos.,63A 4Pole RCCB 30mA-01nos.
156	Fire Panel :
157	(viii)UPS
158	Supplying, installation, testing & commissioning of 2 x 05kVA UPS system for Parallel Redundancy Mode Single Phase Input and Single Phase Output
159	(ix)Substation & supporting items
160	Supply and erection of MS Swaged Type steel tubular pole as perStandard IS: 2713 ( Pat-I and III): 1980 as amended upto date,410 SP 39 overall length 9 meters , planting depth 1.5 meters,above ground 7.5 meters , effective length of Each section. Bottom 5.0 meters, Middle 2.0 meters, Top 2.0 meters.Outside diameter and Thickness of each Section. Bottom 165.1x 5.40 mm, Middle 139.7x 4.50 mm, Top 114.3x 3.65 mm . Joint Length ( in cm.) Bottom 30 cm. Top30 cm.Approximate weight of Pole 170 Kg.Point of application of load below/top (mtr.) 0.35 mtr.Breaking load ( in Kgf ) 478.Working load with factor of Safety : 2.5 ( in Kgf ) 210.Crippling load ( in Kgf ) 339 .Complete with MS base plate of 6mm thick and earthing slot. The rate should include painting the pole with two coats of red-oxide primer of approved brand and erection by digging pit (0.6x0.6x1.5M) and concreeting with 1:4:8 cc up to 400 mm above ground level, stay set etc as requiredcomplete in all respect. (Make: ISI Standards with test certificate)
161	Cross arm made with 100x50x6mm MS Channel 2.30 Mtrs long with fixing clamps, nuts bolts etc for mounting SA, DISC, PIN, GOABS and DO etc. complete in all respect.
162	Horizontal member 2.30 mtrs
163	Cross member 3.10 mtrs
164	Gang operated Air Break Switch 11 KV TP 400 Amps Heavy duty as per IS 9920 & 9921 complete with all fittings.and test certificate. ABI/Mayur/Rex/ Eqv
165	Drope out fuse unit 11 KV TP 400 Amps heavy duty as per IS 9385complete with all fittings.and test certificate. ABI/Mayur/Rex/ Eqv
166	9 KV,5 KA single pole unit Metal Oxide gapless Surge Arrestor for 11KV, 50c/s solidly earthed neutral system confirming to IS:3070 (part 3) Raychem RPG make or equivalent
167	11 KV 10 KN Pin insulator with Pin complete in all respect with spindle.and test certificate. ABI/Mayur/Rex/ Eqv
168	11 KV Disc Insulator 45KN two disc per set with H/W fittings complete in all respect and test certificate. ABI/Mayur/Rex/ Eqv
169	ACSR \"DOG\" Conductor 100sq mm
170	Guy assembly complete with 7/10 SWG GI Stay wire, 140x85 mm HT Guy insulator,18 mm dia stay rod 1.8 mtrs.long wiuth bow thimble,turn buckle and 300 x 300 x 6 mm anchor plate
171	Red oxide primer and Aluminium Paints for two poles
172	Danger Notice Plate 11 KV
173	Danger Notice Plate 440 V
174	Supply and fixing in position 900MM wide 12MM thickrubber matting of 11KV grade as per electricity rules. Along with test certificate.
175	Supply, installation, testing ,commissioning of 100kVA, 11kV/433V Oil Type Outdoor Transformer complete in all respect with the following accessories and latest specification.This specification covers design, manufacture, assembly, testingat manufacturer\"s works, supply & delivery of three phase 50 HZ, 11kV/0.433 V, Delta/Star, Vector Group Dyn11, two winding, outdoor type, oil immersed naturally Oil & Air cooled, Stack Core, non sealed type Distribution Transformer with Outdoor Bushing and cable End Box at both ends .The transformers covered by this specification shall, unless otherwise specified be built to confirm to the latest Indian Electricity Rules, wherever applicable and the requirements of the latest issues of IS: 1180 (Part-I), CBIP Standards and other ISS (All as per latest isuses for level-II)
176	Supply, installation, testing ,commissioning of Diesel generator set 100 KVA prime rating radiator cooled with alternator of 58.5 kVA output, 3 Phase, 415 V, 50 c/s 0.8 p. f. A.C a totally enclosed liquid cooled multi- cylinder(6/12) in-line 4 stroke, radiator cooled diesel engine developing suitable BHP at 1500 rpm,along with standard accessories, ƒBrushless type, Screen protected, Revolving field, Self excited alternator with static excitation system running at 1500 RPM.
177	3 Core 150 Sqmm Cable
178	3 Core 150 Sqmm Cable
179	(x)Cable Trav
180	Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc.as required
181	a) 100 mm width X 50 mm depth X 1.6 mm thickness
182	b) 300 mm width X 50 mm depth X 1.6 mm thickness
183	(C) : INTERNAL AND EXTERNAL PLUMBING WORK.
184	(i) sanitary fixtures.
185	Providing, fitting and fixing white vitreous china pedestal (European type) water closet (W.C) pan with seat and lid, with C.P. brass hinges, 10ltr low level cistern with fittings and brackets 40mm flush bend, 20mm overflow pipe with specials, including Providing and painting and making good the wall and floors as required all complete: W.C. pan European One pice (Ivory) CAT NO 92008/ Eqv.
186	Supplying Installing, testing and commissioning of round / rectangle white colour glazed wash basin under counter type with 32 mm dia waste coupling half thread with 80mm height, CP bottle trap with extention pipe, 15 mm CP 450 mm long CP inlet connection pipe, CP wall flange all of approved make etc, complete in all respect.(Oval wash basin/Roundwash Basin)
187	Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: Basin Mixer
188	Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
189	Supplying, installing and testing 8 mm dia CP health faucet of approved make with necessary CP flexible hose 1200 mm long, wall hook, CP wall flange complete in all respect.
190	Providing and fitting chromium plated toilet paper holder including the making holes and fixed to timber cleats with CP screws washer etc. all complete:.
191	Providing, fitting and fixingBeveled gauge mirror of superior glass with 6mm A.C. sheets ground and fixed to timber cleats with CP screws, washer etc complete.
192	Providing, fitting and fixing. of chromium plated soap dish with necessary screw etc all complete.
193	Supplying, fixing and testing uPVC Multi floor trap along with SS frame & cover (125 mm x 125 mm square / 100mm round). Trap of 100 mm dia. Inlet and 75 mm dia outlet fixed on a bed of cement concrete etc., complete in all respect. (The frame and grating shallbe approved by Architects)
194	Supplying, fixing and testing uPVCP trap along with SS frame & cover (125 mm x 125 mm square / 100mm round). Trap of 100 mm dia. Inlet and 75 mm dia outlet fixed on a bed of cement concrete etc., complete in all respect. (The frame and grating shallbe approved by Architects)
195	Fixing CP brass LONG body bib cock including, necessary flange, cutting and making good he walls / floors wherever required complete.
196	Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL) angular stop cock.
197	Providing, fitting and fixing towel ring of chromium plated brass complete with CP brass screw and timber cleats.
198	Providing, Fitting and Fixing C.P. Brass Double coat Hooks with CP screws.
199	(ii) soil, waste,rain water pipes
200	Supplying, fitting fixing and testing SWR soil and waste pipes confirming to IS 13592, type B solvent fit (confirming to IS 5382) joint inclusive of all necessary fittings like bends, tees, offsets, door bends, junctions, cowls, etc., laid under floor/ fixed on walls on G.I. brackets with GI \"U\" clamps in pipe shafts etc., completein all respect.
201	a) 110 mm dia
202	b) 75 mm dia
203	Supplying, fitting fixing and testing SWR soil, waste pipes confirming to IS 13592type B with rubber ring (confirming to IS 5382) with solventjoint inclusive of all necessary fittings like bends 45 or 90 degree, \"Y\"s,tees, offsets, door bends, junctions, screw type caps, vent cowl etc., fixed in the pipe shafts on pipe racks. completein all respect.
204	a) 110mm dia
205	Supplying,fitting fixing and testing uPVC UV-R pressure pipe (6 Kg/ sq cm) confirming to IS 4985 : 2000 for waste connection from wash basin, kitchen sinks and urinal to floor trap/ anti syphonage pipe with solvent fit joints, including all the fittings, laid under floor/concealed in wall etc, the work shall include wall chase and making good the same in cement mortar etc, complete in all respect.
206	a) 50 mm dia
207	Supplying, fittingfixing and testingSWR rain waterpipes with all fittings like shoes, bends fixed in the pipe shafts (ducts) with suitable supports etc., complete in all respect.
208	a) 110 mm dia - Type - A
209	Supplying, fittingfixing and testingRoof Corner Trap with suitable supports etc., complete in all respect.
210	a) 110 mm dia
211	(iii) : water supply system.
212	ProvidingandfixingChlorinatedPolyvinylChloride(CPVC)pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall
213	a)20 mm nominal outer dia Pipes
214	b)25 mm nominal outer dia Pipes
215	c)32 mm nominal outer dia Pipes
216	d)40 mm nominal outer dia Pipes
217	Supplying, installing and testing approved make full way lever operated CPVC ball valves conforming to ASTM D 2846 with unions etc.Complete in all respect.
218	a) 20 mm dia
219	b) 25 mm dia
220	c) 32 mm dia
221	d)40 mmdia
222	e)50 mmdia
223	(iv) : external sewerage system.
224	Excavation in soil in hilly area by manualmeans including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 50 metres.
225	Supplying, fixing, testing and commissioning precast gully traps, 300X300mm pvc grating (medium duty), 100 mm dia outlet set in PCC 1:4:8 bed, 125 thick masonry chamber in CM 1:4, internal and external plastering 12mm thick in CM 1:6, necessary earthwork, C.I. cover medium duty weighing 12Kgs.etc., complete in all respect. as directed by the Engineer in charge.
226	Providing and constructing Inspection chambers using 125mm thick burnt brick masonry walls built in CM 1:4 over PCC 1:4:8 bed ,RCC cover slab, benching in CC 1:2:4 internalfaces plastered smooth in CM1:4, 15mm thick and outside exposed faces with cm 1:6 15mm thick including 600x600mm medium duty CI Manhole Frame & cover with necessary earth work excavation and backfilling and disposing surplus soil as directed by the Engineer in charge etc., complete in all respect.
227	a) 450x500mm size internal & depth upto 600mm
228	b) 500x500mm dia size internal & depth upto 600mm
229	Supplying, laying, jointing, testing and commissioning approved make double wall corugated with in line socketed pipe (with rubber ring )SN-4with joints for Under ground drainage works. The quoted rate shall include necessary fittings, pipe to be laid below ground level in trenches upto required depth, dewatering, jointing of pipes, water testing and setting on sand cushioning 100mm, refilling, andmakinggoodthesamecompleteasrequiredcomplete in all respect.
230	a) 170 mm dia
231	(v) : external water system.
232	ProvidingandfixingChlorinatedPolyvinylChloride(CPVC)pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
233	a) 50 mm nominal outer dia Pipes
234	PVC TANK DETAILES
235	Providing and placing on terrace high density polyethylene water storage tank with man hole lid and suitable locking arrangement including making holes for inlet, out let and ball cock including testing etc. all complete: (Sintex or equivalent) 2000 Itrs capacity
236	(D) : FIRE DETECTION,ALARM AND FIRE SYSTEM WITH AUTO MANUAL OPERATION.
237	(i) fire detection and alarm system.
238	Supply, installation, testing and commissioning of 08 Zone UL- 864 listed , NFPA-72 compliant , with switched mode power supply, modular construction, auto resettable fuse, 24V DC output,surge protection, programmable AC loss delay, trouble reminder,alarm verification, battery polarity reversible protection,surface mount conventionalIntelligent Main Fire Alarm control Panel with 08 x 2 Dot matrix LCD display, RS 485 Port, IP50.
239	Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.
240	Supplying, installation, testing & commissioning of heat detector operating at 54°C/57C with rate of rise cum fixed tempreature (dual thermistor) type with mounting base complete with all connection etc. as required.
241	Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in A.B.S. box with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.
242	Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.
243	Supplying & laying of 2X1.5 sqmm fire alarm armoured cable, 6000/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer seath complete as required.
244	2C x 1.5 mm Armoured ( power cable)
245	2C x 1.5 mm Armoured ( hooter cable)
246	(ii) internal fire riser piping system.
247	Supplying, installation testing and commissioning of the following
248	Supply, fabrication , laying, testing & commissioning of heavy grade IS marked& as approved make list black mild steel piping confirming to as perIS 1239/3589(Part 1) complete ( ‘B\"class MS ERW pipe ) for undegound/ overground pipes with welded / flanged connection with saddles, supports (all with screwed/welded joints) as required including pipe of shorter lengths, tapering connecting pieces, short or long bends, specials like sockets, union nuts, elbows, reducers, plugs, Tees etc.Complete to make the system operative as required byLFA / TAC authorities the pipes will have to be laid and fixed in trenches. The work includes excavation in all types of soils and back filling, dewatering, etc., making holes in brick or RCC walls, slabs/ roofs and making good the damages by bringing to the original condition to the satisfaction of the Architect and painting two coats of approved shade(Post office red)of enamel paint over a coat of approved primer for over heads pipes and providing and fixing pypkote (corrosion protection tape) including supply and application of pipe coating and spiral Wrapping for underground piping (wrapping should have overlap of 15 to 20 mm)etc.
249	150 mmNB 4.8 mm thick and 18.90 Kg. wt./ mtr. Approx.
250	80 mmNB4 mm thick and 8.36 Kg.wt./ mtr. Approx.
251	50 mm NB3.6mm thick and 5.03Kg. wt. / mtr. Approx.
252	25 mmNB 3.2 mm thick and 2.41 Kg. wt./mtr. Approx.
253	Supply, Installation, testing & commissioning of CI Gate Valve as per IS:14846 (PN16) with matching flanges complete with nuts & bolts. 150 mm (For riser )
254	Supplying and fixing single headed internal hydrant valve withinstantaneous Gunmetal/Stainless Steel coupling of 63 mm dia withcast iron wheel ISI marked conforming to IS 5290 (Type -A) withblank Gunmetal/Stainless Steel cap and chain as required :Single headed Stainles Steel
255	Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :Stainless Steel (Grade 304)
256	Providing, fixing and testingforged brass 25 mm dia screwed inlet single acting air release valve as per IS:9890 with 25 mm dia ball valve on inlet side and pressure gauge with isolating cock.25 mm Air Valve
257	Supplying & fixing 63 mm dia gun metal short branch pipe with 20mm nominal internal diameter size nozzle conforming to IS 903suitable for instantaneous connection to interconnect hose pipecoupling as required:Stainless Steel (Grade 304)
258	Supplying & fixing first aid fire hose reel confirming to IS 884 of thermoplast braidedsuitably reinforced 20 mm size (25kg/cm2/ 350 psi bursting pressure ) , 170 degree & 30 mstandard length with 5 mm tapering branch nozzle ,25mm dia. Pipe to connect to riser with cut off ball valve attachment.Hose to be swinging type wall mounted drum & recessing into hose cabinet to suit location including fixing with lead anchor fasteners & bolts ( Including drum and swivel arrangement ) etc complete.30m
259	Supply, Installation, testing & commisssioning of 100 mm dial Pressure gauge with Syphon tubing, isoltaion valve & mounting accessories complete Range : 0 - 16 kg/sq.cm.Pressure Gauge : 0- 16 kg/sq.cm.
260	(iii) external hydrant system.
261	B’ class MSERW Pipe as per IS1239 for undegound/overground pipes with welded /flanged connection with saddles, supports (all with screwed/welded joints) as required including pipe of shorter lengths, tapering connecting pieces, short or long bends, specials like sockets, union nuts, elbows, reducers, plugs, Tees etc.Complete to make the system operative as required byLFA / TAC authorities the pipes will have to be laid and fixed in trenches. The work includes excavation in all types of soils and back filling, dewatering, etc., making holes in brick or RCC walls, slabs/ roofs and making good the damages by bringing to the original condition to the satisfaction of the Architect and painting two coats of approved shade(Post office red)of enamel paint over a coat of approved primer for over heads pipes and providing and fixing pypkote (corrosion protection tape) including supply and application of pipe coating and spiral Wrapping for underground piping (wrapping should have overlap of 15 to 20 mm) etc.150 mmNB 4.8 mm thick and 18.90 Kg. wt./ mtr. Approx.
262	(iv) spainkler system.
263	Supplying, installation testing and commissioning of the following
264	‘B\" class MS ERW pipe as per IS1239 (Part 1) for over ground pipes with welded / flanged / screwed joints and with heavy clamps, hangers, brackets or pipe supports (all with screwed/welded joints) as required including MS pipe of shorter lengths, tapering connecting pieces, short or long bends, forged specials like sockets, union nuts, elbows, reducers, plugs, tees, bendsetc. complete to make the system operative as required byLFA / TACauthorities.The pipes will have to be laid and fixed on walls, ceilings, into brick walls or RCC with lead anchor fastners.The work includesmaking holes in brick or RCC walls, slabs/ roofs and making good the damages by bringing to the original condition to the satisfaction of the Architect/Consultant/Client and painting two coats of approved shade (Post office red) of enamel paint over a coat of approved primer for over ground / overheads pipes.
265	125 mmNB4.80 mm thick and 15.9 Kg.wt./ mtr. Approx.
266	100 mmNB4.5 mm thick and 12.2 Kg.wt./ mtr. Approx.
267	80 mmNB4 mm thick and 8.36 Kg.wt./ mtr. Approx.
268	65 mmNB3.6mm thick and 6.42 Kg.wt./ mtr. Approx.
269	50 mm NB3.6mm thick and 5.03Kg. wt. / mtr. Approx.
270	40 mm NB3.2 mm thick and 3.56Kg. wt. / mtr. Approx.
271	32 mm NB 3.2mm thick and 3.01 Kg. wt. / mtr. Approx.
272	25 mmNB 3.2mm thick and 2.41 Kg. wt./mtr. Approx.
273	Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :
274	Pendent Sprinkler
275	5 mm glass bulb 141 deg. Pendent Sprinkler
276	Providing, installation, testing & commissioning of adjustable rosette plate for 15mm dia in white finish UL Listed or FM approved complete as required.
277	Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required.
278	c) 1500 mm
279	SITC of test & drain assembly with all 25 mm dia piping, 25 mm drain valve etc complete in all respect (TEST SPRINKLER ALONG WITH ISOLATION VALVES, SIGHT GLASS ETC & REQUIRED PIPING UPTO NEAREST DRAIN )
280	Test assembly
281	Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
282	Size : 125 mm. (For Floor Connection)
283	Size : 100 mm. (For Floor Connection)
284	Size : 80 mm. (For Floor Connection)
285	Supply, erection, testing & commissioning of FLOW SWITCH as per technical specification.
286	Size : 125 mm. (For Floor Connection)
287	Size : 100 mm. (For Floor Connection)
288	Size : 80 mm. (For Floor Connection)
289	Providing, installation, testing and commissioning of non-returnvalve of following sizes confirming to IS: 5312 complete with rubbergasket, Gl bolts, nuts, washers etc.as required :
290	Size : 125 mm. (For Floor Connection)
291	Size : 100 mm. (For Floor Connection)
292	Size : 80 mm. (For Floor Connection)
293	Pressure Guage with isolation clock: 0-16 kg/sq.cm (for sprinkler header)
294	Size : 125 mm. (For Floor Connection)
295	Size : 100 mm. (For Floor Connection)
296	Size : 80 mm. (For Floor Connection)
297	(iv) fire extingishers.
298	Providing & Fixing of fire extinguishers with necessary accessories, stand, trolley, etc.
299	Supply, erection, testing & commissioning of 4 Kg ABC (Powder Type) Fire Extinguisher. In HP Mild Steel Cylinders ISI markedfitted with pressure indicating gauge, internal discharge tube, squeeze lever type valve, discharged nozzle, suspension bracket, conforming to IS: 15683 duly charged with ABC powder (Mono Ammonium Phosphate) conforming to IS: 14609 and pressured by Nitrogen suitable for operating .on 30⁰C to + 55⁰C. (4 years maintenance free) complete in all respect.
300	Supply, erection, testing & commissioning of 4.5 Kg. Cap. CO2 type Fire Extinguisher (ISI marked) complete with tube horn etc.(ISI marked), handle , fixing bracket & other accessories.
301	ISI Marked Stainless Steel K type fire extinguisher of capacity 4kg assigned to extinguish class F fire for use in kitchen areas with a discharge range of 3 meters and working pressure of 15 bar operating at a temperature -10C to 60C confirming to IS 15683
302	(v) signages.
303	Installation in position the \"FIRE EXIT\" Sign with luminicent colour having size 300 x 100 mm
304	Fixing in position the signages \" FIRE ORDER\" contain the following matter on 3 mm thick \"Opaque\" PVC foam board of computerised cut, PVC non-reflective self adhesive vinyle painted foam board of size 1200 x 1000 mm.
305	Fixing signage with printed \" IN CASE OF FIRE,DO NOT USE LIFT. USE STAIRS ONLY\" OF 1.5 cm height letters in red with white background. The size of the board shall be 300 x 250 mm and shaall be fixed at the height of 2 mtrs.from finished floor near Manual Call Point.
306	(E) : CCTV,IP-PBX,WIFI,NETWORKING,HARDWARE.
307	(i) network components (active).
308	L2 Switch: Supply, Installation, Testing & Commissioning of Gigabit fixed chassis in 1RU size. Includes 24 RJ-45 10/100/1G BaseT4x1/10 Gig SFP+ (uplink/ stacking ports ,Switching capacity 51 Gb/s , Switch frame rate 41 MPPS.
309	L2 Switch: Supply, Installation, Testing & Commissioning of Gigabit fixed chassis in 1RU size. IncludesRJ-08 10/100/1G BaseT2x1 Gig SFP+ (uplink/ stacking ports ,Switching capacity 14 Gb/s , Switch frame rate 11 MPPS.
310	L2 POE Switch: Supply, Installation, Testing & Commissioning of Gigabit fixed chassis in 1RU size. Includes 24 RJ-45 10/100/1G BaseT4x1/10 Gig SFP+ (uplink/ stacking ports, should support Dual PSU ,Switching capacity 51 Gb/s , Switch frame rate 41 MPPS.
311	SFP: Supply & Installation of SFP Single mode 1G SFP module (1310mm, 10 km., LC-LC)
312	SFP: Supply & Installation of SFP Single mode 10G SFP module (1310mm, 10 km., SC-LC)
313	(ii) network components (passive).
314	Supply, Installation, Testing & Commissioning of Loaded LIU 12 port
315	Supply , Installation ,Testing & Commissioning 3 mtr LC-LC Fiber Patch Cord
316	Supply , Installation ,Testing & Commissioning 3 mtr SC-LC Fiber Patch Cord
317	Supply, Installation, Testing & Commissioning of Cat-6 24-Port UTP Loaded ToollessPatch Panel
318	Supply of 9U Rack :Frame/500x500 / FM/ Casters T2/Glass/Metal Door, Shelf/500, PDU 1Ph, 230V, 8A, IRP Fuse - 1.8KVA, ITE / Server Rack Air Circulation module/Door Mount/ 180CFM, Horz Cable Organiser/1U/Loop, Mounting Hardware-CR (Pack of 10)
319	Supply of 22U Rack :Frame/480x600 / FM/ Casters T2/Glass/Metal Door, Shelf/500, PDU 1Ph, 230V, 8A, IRP Fuse - 1.8KVA, ITE / Server Rack Air Circulation module/Door Mount/ 180CFM, Horz Cable Organiser/1U/Loop, Mounting Hardware-CR (Pack of 10)
320	Supply, Installation, Testing & Commissioning of Cat-6 1M UTP Copper Patch Cord -Colour-yellow to be used for CCTV.
321	Supply, Installation, Testing & Commissioning of Cat-6 1M UTP Copper Patch Cord -Colour-blue to be used for data.
322	Supply & Laying of 6 core armoured single mode optical fiber cable .
323	Supply & Laying of UTP CAT6 Cable (305 Mtr.)
324	(iii) IP survrillance.
325	Dome Camera: Supply, Installation, Testing & Commissioning of 2MP H.264/H.265 NW IR Dome Camera, 0.04Lux (Color), 0Lux (B/W, IR LED on), 2.8mm fixed lens, ONVIFS,G,T, WDR 120dB, 30fps@4MP all resolutions (H.265/H.264), H.265, H.264, MJPEG codec supported, triple streaming with full configuration, defocus detection, Directional detection, Motion detection, Tampering, crossing line, alarm in & out , Micro SD/SDHC/SDXC memory slot (Max. 128GB), IR viewable length 20m or better, PoE, CE, FCC, UL , NDAA, BIS, ROHS .
326	Bullet Camera: Supply, Installation, Testing & Commissioning of 2MP H.265 NW IR Bullet Camera, 0.04Lux (Color), 0Lux (B/W, IR LED on), 4mm fixed lens, ONVIFS,G,T, WDR 120dB, 30fps@5MP all resolutions (H.265/H.264), H.265, H.264, MJPEG codec supported, triple streaming with full configuration, defocus detection, Directional detection, Motion detection, Tampering, crossing line, alarm in & out , Micro SD/SDHC/SDXC memory slot (Max. 128GB), IR viewable length 30m or better, PoE, CE, FCC, UL , NDAA, BIS, ROHS .
327	NVR : Supply, Installation, Testing & Commissioning of 32CH NVR, support 12 megapixel camera supported, recording bandwidth 300 Mbps , 4K video out on HDMI monitor support, Dual monitor video out support, H.265, H.264, MJPEG compression support, 8 internal HDDs , e-SATA storage support, ARB & Failover (N+1) support, P2P service (QR code connect) support, CE, FCC,ROHS, UL and BIS.
328	Supply, Installation, Testing & Commissioning of 8 TB HDDwith 7200RPM
329	Supply, Installation, Testing & Commissioning of 50\"4K Ultra HD Display
330	Supply & Installation of Wireless Mouse with Mouse Pad
331	Supply & Laying of HDMI cable 10 Mtr
332	Supply & Installation of Waterproof PVC Square Junction Box for CCTV Cameras IP65 5x5
333	(iv) IP-PBX.
334	Supply , Installation , testing & Commissioningof EPABX SYSTEM :32 Analog-Extension, Analog Trunk :04 , GSM Port 04 , PRI 30ch 1, SIP trunk -10 , IVRS , Voice mail and expendable up to 128 port .
335	Supply & Installation of 20 pair (MS/PVC) MDF Box with Krone module having locking facility
336	Supply, Installation , Testing & commissioningofTable mount Phones having display .
337	Supply & Laying of 2 Pair 0.50 mm sheathed telephone cable
338	(v) P A system.
339	SPEAKER : Supply of In-Ceiling Speakers - 150mm / 4\" Full Range Driver, Compatible with 100v Line Volt, Amplifier Power Requirement 6 watts - 16/7 Use - BG/Public Address
340	AMPLIFIER : Supply, Installation, Testing & Commissioning of Digital 2 Channel mixer Amplifier -Min. 240 watts in Continuous Running Mode.
341	Supplying and installation of the zone controller cum digital signal processor builtin dante ,Min 16 AEC Inputs , Network Controlled .
342	Supply, Installation, Testing & Commissioning of networked Call station For PA system.
343	Supply & Laying of 2 core 1.5 SQ.MM.Heavy-duty audio copper cable ( 16 AWG) For PA system
344	(vi) power backup.
345	UPS :Supply, Installation, Testing & Commissioning of 5 kva ONLINE UPS system with 15 minutes battery backup with single SMF battery bank retundancy mode compatible . 3 phase in & sigle phase out.
346	UPS :19 inch 2U , 1.5 KVA Rack Mountable UPS having 15 Min Backup . Builtin battery bank .
347	(F) : FURNITURE AND FURNISHING.
348	Atlas Solid Wood 4 Seater Dining Table With Rickman Lounge Chairs Table: 1200 x 750 x 750; Chair: 500 x 500 x 850
349	D\"aromas Teakwood Café Dining Furniture for Modern Spaces Table: 600 x 610; Chair: 430 x 460 x 810
350	Bar Table And Stool Set, Seating Capacity: 3 Seater 1600 x 450 x 1050
351	Key Hinged Polished Mild Steel Locker 910 x 760 x 1830
352	Office Filing Cabinet 1370 × 685 × 460
353	Director\"s Desk (Left Side Storage)1800 x 1350 x 750
354	Low Back IC 123 Mini Jazz LB Innowin Office Ergonomic Chair 480 x 450 x 960
355	Nilkamal Trenvi High Back Office Chair 760 x 760 x 1220
356	Elif Executive Table (Exotic Teak Finish) 1470x 635x 762
357	Modern Black Leather Sofa Set, For Office, Waiting Area
358	Rustic handmade solid wood sleeper coffee table Xtra Large Xtra wide version 1000 x 690 x 300
359	Wilber 3 Seater Sofa Set 1870 x 785 x 720
360	Inspira’ 8 Feet Meeting Table In Norica Walnut Laminate Finish 2400x 1100x 760
361	Vixen Revolving Chair 650 × 680 × 860
362	Guest Chair for Office Visitors 580 x 510 x 900
363	Storage Shelf (slotted angle coated with galvanised steel four layers) 1220 x 460
364	ikea LANGFJAELL conference chair with armrests
365	(G) : STORM WATER DISPOSAL.
366	Excavation work by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m.
367	Providing box drain of 60 cm (ht) x 45 cm (width) of internal dimension with 1:2:4 Plum concrete (40mm & down) side wall thickness of 23 cm (hill side) and 30 cm (road side) with1:3:6 (20 mm & down) base concrete of thickness of 15 cmwith standard specification over 15 cm stone soling including providing & laying guard stones, complete as per the direction of theEngineer-in-Charge.
368	Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber)
369	Providing and Laying 15mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing etc all complete.
370	Cost of Haulage Excluding Loading and Unloading of stock material within 120 km all complete.
371	Loading and Unloading of Cement or Steel by Manual Means and Stacking.
372	Cost of Haulage Excluding Loading and Unloading of Sand within 50 km all complete.
373	Cost of Haulage Excluding Loading and Unloading of Stone chips within 50 km all complete.
374	Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum.
375	Head load of non-stock materials for a distance beyond 30 m and within 100 m distance.
376	Haulage for throwing away of excavated earth via Surfaced Road for the distance of 30 km excluding loading and unloading all complete.
377	Providing, fitting & fixing of Galvanised Steel Grating of dimension 450 x 500 mm Material(rate as per the quotation attached)(including transportation & installation)For 200 m length
378	(H) : RAIN WATER HARVESTING SYSTEM.
379	Engagement of ordinary labour for Clearing and preparing the surface, labour for carriage and placement of water tank at designated platform including throwing of spoils etc all complete
380	Supply of water tank 5000L capacity (Rate as per STCS proforma invoice 22/STCS/PUR/H&FWD/700/25-26)
381	Transportation charges/delivery charges (Rate as per STCS)
382	Providing & fixing 15cm wide 45cm overall semicircular prepainted (HULLAS) sheet (Class I) gutter with iron brackets 40x3mm size, boltsfilled with epoxy in each bolts, nuts (8 to 10 gm per bolt), washers etc including making, connection with rain water pipes.
383	Soil pipe: 100mm dia PRINCE/SUPREME or equivalent soil pipe
384	Construction of platform (steel/cement concrete), connecting pipes, valves, labour charges etc. (payment to be made as per the actual measurement)
385	Provision for water pump etc all complete.
386	Provision for water filter etc all complete.
387	(I) : Provision for Laripa Works.
388	(J) : Provision for Water supply from source to site.
389	(K) : Provision for Dismantling and site clearance of existing structure.

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Sikkim Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Upgradation Of Sowa Rigpa Educational Institute At Nit Deorali, Sikkim., Gangtok-Sikkim

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Upgradation Of Sowa Rigpa Educational Institute At Nit Deorali, Sikkim., Gangtok-Sikkim

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us