Tender For Various Civil Works In accommodation No.-2 (Purana) Type-6 Situated As A Result Of Change Of Residence In Raj Bhavan Colony Under Renovation Improvement Help.- 1 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below DAR NO-15.13.1 2 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm DAR NO-15.23.1 3 Providing and fixing of kitchen shelves/cabinet with basket, shutter is made by mica laminated 18-19 mm board and back side of box is made by 6 mm Ply . Length and width of cabinet is 50 cm and depth/height of cabinet is 65cm including cost of all accessories such as handle, hinges, rolling channel, basket, catcher etc complete work. 4 Plain Basket 19x20x4 Rate-2268/1.18=1915.25 5 Plain Basket 19x20x6 Rate-2688/1.18=2261.02 6 Plain Basket 19x20x8 Rate-3120/1.18=2644.07 7 Providing and fixing of kitchen cubborad shutter is made by mica laminated 18-19 mm board and back side of box is made by 6 mm Ply . Length and width of cabinet is 30 cm and depth/height of cabinet is 60 cm including cost of all accessories such as handle, hinges, rolling channel, basket, catcher etc complete work. 8 Providing and fixing of wooden Almirah Box Work with mica laminated 19 mm ply board out side with one side decorative lamination . including cost of all acessories such as SS handle, hinges, lock, rolling channel etc complete work. 9 Providing and fixing SWR pipes as per 15:13592 110 mm dia for drain & sewer system with trenching , refilling & testing of joint complete including all fitting , labour and T&P etc . 10 Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes , having thermal stability for hot & cold water supply , including all CPVC plain & threaded fittings , i/c fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipe & fitting with one step CPVC solvent cement and cost of cutting chases and making good the same including testing of pipes complete as per direction of Engineer - in - charge , concealed work . including cutting chases and making good the walls etc (20 mm nominal outer dia pipe )18.8.2 11 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete.(dar-11.38) ( size of tile 300x300mm ) 12 Providing and fixing 1st quality ceramic, glazed wall tiles conforming to IS 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green black of any size as approved by Engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thck bed of cmeent mortar 1:3 ( 1 cement 3 coarse sand) and jointing with grey cmeent slurry @ 3.3 kg per sqm, including pointign in white cement mixed with pigment of matching shade complete.DAR NO-8.31 13 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests DSR NO- 17.1.1 14 Providing and fixing wash basin with c.i brackets . 15 mm c.p brass pillar tapes , 32 c.p brass waste of standard pattern , including painting of fitting and cutting and making good the walls wherever requried:Stainless Steel AISI-304(18/8) Wash basin 530x345 mm with single 15 mm C.P. brass pillar tap DSR NO-17.7.11 15 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore DAR NO-18.50.1 16 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore DAR NO-18.53.1 17 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. DSR NO-13.88 18 12 MM cement plaster of mix ;1:4 ( 1 cement :4 coarse sand ) ) DAR NO-13.4.1 19 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(D.S.R Item-13.80) 20 Finishing walls with Acrylic premium Smooth exterior paint with Silicon additives of required shade: New work ( Two or more coats applied @ 1.43ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) (apex Ultima, weather coat All guard) asian, berger. ( D.S.R Item 13.47.1 ) 21 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work ( Two or more coats applied @ 1.43 ltr/10sqm) over existing cement paint surface (apex Ultima, weather coat All guard).13.112.1 22 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture 13.48.3 23 Provding and fixing ISI marked flush door shutters conforming to IS : 2202 (part-1) non- decorative type, core of block board contruction with frame of 1st class hard wood and well matched commercial 3 ply veneers on both faces of shutter :35 mm thick including isi marked stainless steelbutt hinges with necessary --9.21.1 24 Treatment of soil under exsting floors using chemical emulsion @ one liter per hole , 300mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2(1 cement:2 coarse sand ) to match the existing floor with chlopyriphos/ Lindane E.C 20 % with 1% concentration(dar-2.35.3) 25 Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/ m² DSR No-12.1.3 26 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required::In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (10.25.2) 27 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sam and coarse sand @ 1.289 kg/sqm, This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately.For the purpose of measurement the entire treated surface will be measured.DSR NO-22.6 28 Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) DSR NO 13.116 29 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed vitrified floor tiles polished finish of size 1200x600 DSR NO-11.41A1.2.2 Please Enable Macros to View BoQ information
