|
| 1 | Taking down wooden / aluminium chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each complete all as specified and as directed. |
| 2 | Taking down wooden / aluminium chowkhats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified and as directed. |
| 3 | Taking down Shutter of any description exc 2 sqm & refixing in same opening complete all as specified and as directed. |
| 4 | Taking down shutters of any description exc 1 sqm and not exc 2 sqm each and refixing in the same opening complete all as specified and as directed. |
| 5 | S&F Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed in 2nd class hardwood complete all as specified and as directed. |
| 6 | S&F of 40mm thick flush door shutter of solid core construction with particle board core both faces are covered with decorative face veneer with lipping /frame to match complete all as specified and as directed. |
| 7 | S&F 35mmthick second class hard wood glazed and skelton shutters,open rebated and prepared to receive glass gauze,etc (without sash bars),edges of framingplain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) fitted to chowkat complete all as specified and as directed. |
| 8 | S&F 30mmthick second class hard wood glazed and skelton shutters,open rebated and prepared to receive glass gauze,etc (without sash bars),edges of framing but divided into squares, with plain,chamfered or rounded,mitred for securing glass etc sizes windows,ventilators, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b) complete all as specified and as directed. |
| 9 | S&F Aluminium alloy wire cloth,0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with Aluminium wire staples complete all as specified and as directed. |
| 10 | S&F solid PVC Door Frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying& fixing in opening as per specification and drawing complete all as specified and as directed. |
| 11 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck insidesolvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail either side & as gap insert for top rail and bottom rail.Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed. |
| 12 | S&F Powder coated anodised minimum powder coating thickness 50 micron for aluminium frame work and framefor doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 13 | S&F Powder coated aluminium window , ventilator etc fixed / sliding or pull and push type in shutter frames or shutters with two/three track sliding aluminium frame of Jindal /Hindalco (or) Equivalent make of approved size, including necessary joining cleats, glazing clips,powder coated aluminium snap beading, screws, including necessary anodised aluminium fittings like handles etc complete allas fixed in reapairs all as specified as per manufacturers instructions complete all as specified and as directed.Note: EPDM Rubber beading/gasket measured and paid seperatley. |
| 14 | S&F EPDM Rubber beading around glass in aluminium windows /ventilator shutters complete all as specified and as directed. |
| 15 | S&F Powder Coated aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement complete all as specified and as directed. |
| 16 | S&F 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 17 | S&F solar control film 25 micron reflective type sticked to glass panes as per manufacturers instruction complete all as specified and directed. |
| 18 | S&F 100mm long aluminium, anodisedbarrel tower bolts of extruded section, complete all as specified and as directed. |
| 19 | S&F 100mm Extruded aluminium alloy handleall as specified complete all as specified and as directed. |
| 20 | S&F butt hinges 75mm size exturded Alu. alloy with galvanised mild steel hinge pin anodised and fixed type C-21 complete all as specified and as directed. |
| 21 | S&F butt hinges 100mm size exturded Alu. alloy with galvanised mild steel hinge pin anodised and fixed type B-21 complete all as specified and as directed. |
| 22 | S&FAluminium alloy, anodised, sliding door bolt 250mm length, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed. |
| 23 | S&F 100mm long aluminium, anodisedbarrel tower bolts of extruded section, complete all as specified and as directed. |
| 24 | S&F 100mm Extruded aluminium alloy handleall as specified complete all as specified and as directed. |
| 25 | Demolition of unreinforced cement concrete in ground floor and pavings n.exc. 15 cm thick (below or above GL) complete all as specified and as directed. |
| 26 | Dismantling wrought iron or mild steell work of any descriptionworks etc complete all as specified and as directed. |
| 27 | Taking down of cement mortar plaster of any description and preparation of surfaces for receiving new plaster including racking out of joints complete all as specified and as directed. |
| 28 | M&L for Plain cement concrete (!:4:8) type D-2 using 40 mm graded stone aggregate as in foundation filling as mass concrete complete all as specified and as directed. |
| 29 | M&L for of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and as directed. |
| 30 | M&L for PCC 100 mm thick, type D-2, 1:4:8 (40mm graded aggregate) as in sub-base, complete all as specified and as directed. |
| 31 | M&L 100 mmthick PCC, type B-1, 1:2:4 (20mm graded aggregate) as in flooring in , surface finished Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and as directed. |
| 32 | Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid bedded and pointed in any mortar complete all as specified and as directed. |
| 33 | M&L for Chequered cement concrete tiles 30cm x 30cm x 22 to25mm thick, set, jointed and pointed in neat cement slurry with grey cement andpigment in floors including 20mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 34 | S&F Granite (of any type) slab18-20 mm thick granite slab (table rubbed and polished) as in cooking platforms and like in cm (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite andlaid over 20mm thick screed bed in CM(1:6) incl all necessary mouldings/ rounding of edge finish all as specified and directed. |
| 35 | Providing edge moulding to 18-20mm thick of grenite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and as directed. |
| 36 | M&L for internal rendering15mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed. |
| 37 | M&L for 5mm thick rendering in cement mortar (1:3) on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified and as directed. |
| 38 | M&L for external rendering 20mm thick in cement mortar (1:4) on any face of brick wall or concrete surfaces, finished fair and even with outer 10mm mixed with water proofing compound, complete all as specified and as directed.Note: WPC will be measured and paid seperately |
| 39 | Supply only water proofing compound, complete all as specified and as directed. |
| 40 | Demoltion ofbrick work built in cement mortar of any specification and in any position complete all as specified and as directed. |
| 41 | M&L for Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified. |
| 42 | M&L for brick work with sub class ‘B’ old size fly ash bricks straight or curved on plan to any radius as in half brick thick wall built in CM 1:4 complete all as specified and as directed. |
| 43 | Materialand Labourfor Complete removal ofOld plastered surface ofwall and applying two coat of acrylic distemper over a coat of primer complete all as specified and as directed. |
| 44 | M&L for Preparation of new plastered surfaces wall and applying two coats of Oil bound distember over a coat of primer complete all as specified and as directed. |
| 45 | M&L for applying two coats of synthetic enamel paint (Ordinary tint)over one coat of primer on new plastered surfaces including preparation of surfaces, complete all as specified and as directed. |
| 46 | S&F Vitreous china white wash down water closet (pedestal pattern) including PVC seat cover and connection to drain or out going pipe and to flushing pipe anti-syphonage pipe etc, fixed as in repair, complete all as specified and as directed. |
| 47 | S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified and as directed. |
| 48 | S&F in repairs vitreous china wash hand basin white flat back of size 550 x 400mm including brakcets 32mm dia. chromium plated waste coupling with waste pipecomplete all as specified and as directed. |
| 49 | Demolition of cementconcrete in sunken portion of any description and in any position not otherwise specifically provided, complete all as specified and as directed. |
| 50 | M&L 15mm thick CM(1:3) with WPC on walls as well as on sunken floor portion finished even and smooth without using extra cement, complete all as specified and as directed.Note:- WPC shall be measured and paid separately. |
| 51 | Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces, complete all as specified and as directed. |
| 52 | APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric(wt. not less than 150 gms/sqm)land on primed surface by forced apllication complete all as specified. |
| 53 | M&L PCC (1:5:10) type E2 (using 40mm graded aggregate) in filling under sunken floor portion, complete all as specified and as directed. |
| 54 | M&L 30mm thick PCC(1:2:4) type B-1, using 20mm graded aggregate as in floor finished even and rough to receive top layer complete all as specified and as directed. |
| 55 | Taking up or down steel tubing and connection, removal to stack bore of pipe 15mm complete all as specified and as directed. |
| 56 | \"-Ditto- all as per Item No. 55 above but bore of pipe 20mm complete all as specified and as directed. |
| 57 | \"-Ditto- all as per Item No. 55 above but bore of pipe 25mm complete all as specified and as directed. |
| 58 | \"-Ditto- all as per Item No. 55 above but bore of pipe 32mm complete all as specified and as directed. |
| 59 | Supplying and laying of CPVC pipes 32mm outer diameter SDR 11 & Plain CPVC SDR 11 fittings in repairs complete all as specified and as directed. |
| 60 | Supplying and laying of CPVC pipes 25mm outer diameter SDR 11 & Plain CPVC SDR 11 fittings in repairs complete all as specified and as directed. |
| 61 | Supplying and laying of CPVC pipes 20mm outer diameter SDR 11 & Plain CPVC SDR 11 fittings in repairs complete all as specified and as directed. |
| 62 | Supplying and laying of CPVC pipes 16mm outer diameter SDR 11 & Plain CPVC SDR 11 fittings in repairs complete all as specified |
| 63 | Supplying and laying of CPVC brass elbow pipes 20mm outer diameter SDR 11 fittings in repairs complete all as specified |
| 64 | Supplying and laying of CPVC brass elbow pipes 25 mm outer diameter SDR 11 fittings in repairs complete all as specified and as directed. |
| 65 | Supplying and laying of CPVC Brass Elbow (3/4 X ½) pipes 20mm outer diameter SDR 11 fittings in repairs complete all as specified and as directed. |
| 66 | Supplying and laying of CPVC Brass Tee of 20mm outer diameter SDR 11 fittings in repairs complete all as specified and as directed. |
| 67 | Supplying and laying of CPVC Brass Tee of 25 mm outer diameter SDR 11 fittings in repairs complete all as specified and as directed. |
| 68 | Supplying and laying of CPVC Male Brass Threaded Adaptor (MTA/ MBTA) ) Brass Tee of 20mm outer diameter SDR 11 fittings in repairs complete all as specified and as directed. |
| 69 | Supplying and laying of CPVC Male Brass Threaded Adaptor (MTA/ MBTA) ) Brass Tee of 25 mm outer diameter SDR 11 fittings in repairs complete all as specified and as directed. |
| 70 | Supplying and laying of CPVC Female Brass Threaded Adaptor (MTA/ MBTA) ) Brass Tee of 20mm outer diameter SDR 11 fittings in repairs complete all as specified and as directed. |
| 71 | Supplying and laying of CPVC Female Brass Threaded Adaptor (MTA/ MBTA) ) Brass Tee of 25 mm outer diameter SDR 11 fittings in repairs complete all as specified and as directed. |
| 72 | S&F Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed. |
| 73 | S&F Tubular towel rail 20mm dia brass chromium plated complete all as specified and as directed. |
| 74 | S&F in repair 15mm stop cock/angle cock cast copper alloy with crutch or butterflty handle, screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated with fancy shank and cup complete all as specified and as directed. |
| 75 | Supply and fix in repair stop valves20mm dia bore of cast copper alloy, screwed down, high pressure, with fancy type, chromium plated, screw both ends for union and fixed, complete all as specified and as directed. |
| 76 | S& F in repair Bib tap of cast copper alloy brass but fency type, Chromium plated 15mm bore, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 77 | S&F Two Way brass CP Bibcock with wall flange50 to 65mm long(facilitate to fix the Halth faucet) (Make:Jaquar) CQTNO;23041/FLR 8041N) and Make: CERA catNo:F3002161 /F200216115 mm dia boretype withhandle, screwed down, screwed for iron pipe or famale of quarter turn type as fixed in repairs complete all as specified and as directed. |
| 78 | S&F in repair Gun-metal, globe or gate valves 20mm dia bore pipe, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed. |
| 79 | Supply and fix in repair 15mm bore fancy type pillar tap, cast copper alloy with capstan heads, chromium plated screwed down, high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed. |
| 80 | S&F PVC Connection pipe, 450mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repair complete all as specified and as directed. |
| 81 | S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement as in repairs complete all as specified and as directed. |
| 82 | S&F 110mm bore PVC (SWR) pipe of pressure not less than 4 Kg/Sqcm in single socketed, in any length with rubber ring joints,fixed to wall including distance pieces and stack clamp with nuts & bolts complete all as specified and as directed. |
| 83 | S&F 110mm bore PVC (SWR) pipe of pressure not less than 4 Kg/Sqcm in single socketed, in any length with rubber ring joints,laid in trenches or in floors complete all as specified and as directed. |
| 84 | S&F 110mm bore, PVC (SWR) bends any radius complete all as specified and as directed. |
| 85 | S&F 110mm bore, PVC (SWR) branch piece, single (single T) equal or unequal with access door complete all as specified and as directed. |
| 86 | S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 87 | S&F 75mm bore PVC (SWR) pipes(pressure rating not less than 4 Kg/cm2) single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and as directed. |
| 88 | S&F 75mm bore, PVC (SWR) bends any radius complete all as specified and as directed. |
| 89 | Dismantling of floor hearth and wall tiling incl mortar beding and throw rubbish out the premises complete all as specified and as directed. |
| 90 | Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchand overincluding 15mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed. |
| 91 | S&F Vitrified ceramic tiles 10mm thick Square/ rectangular) polished area of each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured (Light Shade)cement to match over 20 mm thick screed bed or bedding layer of cement mortar(1:6) for laying floor finishes complete all as specified and as directed. |
| 92 | M&L forlight shade Vitrified tile 10mm thick polished, area of tile n exc. 0.36 sqm as in Skirting set and jointed in cement slurry over and including 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed. |
| 93 | M&L for glazed coloured ceramic tiles of size 300x200x 7mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed. |
| 94 | M&L for glazed coloured designer ceramic tiles of size 450x350x7mm OR 450X300X7 thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed. |
| 95 | Preparation of newlyplastered surfaces or un-plastered surfaces andapply three coat of white wash towalls including cornices complete all as specified and as directed. |
| 96 | Preparation of newlyplastered surfaces or un-plastered surfaces andapply three coat of white wash toceilingss complete all as specified and as directed. |
| 97 | M&Lfor preparing of olddecorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash on walls including cornices complete all as specified and as directed. |
| 98 | M&Lfor preparing of new decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash to ceiling complete all as specified and as directed. |
| 99 | M&L forwashing rubbing down and stopping of distempered and painted surfaces and applying one coats of oil bound distemper on wall surfaces including proper curing complete all as specified and as directed. |
| 100 | M&L Complete removal of existing treatment of wall suface and applying Distempering with First quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification. Two or more coats on new worktwo coats of oil bound distemper, over a coat of wall care putty, complete all as specified and as directed. |
| 101 | M&L Preparation of newlyplastered surfacesfor applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 102 | Taking down carefully copper / aluminium Point Wiring [Light, Fan, Socket or Power] complete including Fittings such as Switches, Ceiling Roses, Pendants, Regulators, Sockets etc. and making good the disturbed surfaces all as per existing complete all as specified and as directed. |
| 103 | M & L for Point Wiring complete with 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, confirming to IS - 694 drawn through PVC Conduit concealed in Walls / Roofs / Floors / Ceiling etc. and Modular Type Pressed Metal Flush Box made out of 1mm thick GI Sheet of suitable size and including Modular type Base / Grid Frame & Cover Frame for housing Modular Type Switches, Sockets and Regulators etc. concealed in walls, including 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable as earth continuity conductor with colour coding and connecting to Earth Dolly for One Light / Fan Point / Bell Point controlled by One Switch complete all as specified and as directed. |
| 104 | All as per Serial Item No. 103 above but for One Light / Fan Point / Bell Point controlled by Two Nos. of, Two way Switches complete all as specified and as directed. |
| 105 | All as per Serial Item No. 103 above for but One 3 Pin Switch Socket Outlet 5 Amps on Same Board complete all as specified and as directed. |
| 106 | All as per Serial Item No. 103 above but for One 3 Pin Switch Socket Outlet 05/06 Amps on independent board, with 1100 Volts, FRLS grade, 2.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable confirming to IS - 694 and including 1100 Volts, FRLS grade, 2.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable as Earth Continuity Conductor complete all as specified and as directed. |
| 107 | All as per Serial Item No. 103 above but for One 3 Pin Switch Socket Outlet 15/16 Amps on independent board, with 1100 Volts, FRLS grade, 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable confirming to IS - 694 and including 1100 Volts, FRLS grade, 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable as Earth Continuity Conductor complete all as specified and as directed. |
| 108 | S & F Switch, Modular Type, One Module, Single Pole, One Way, 6 Amps, 230 Volts complete all as specified and as directed. |
| 109 | S & F Switch, Modular Type, One Module, Single Pole, Two Way, 6 Amps, 230 Volts complete all as specified and as directed. |
| 110 | S & F Socket Outlet, 3 Pin, 6 Amps, Modular Type, Two Modules, 230 Volts complete all as specified and as directed. |
| 111 | Supply and fixing Modular switch 1 way 16A, 1 module single pole complete all as specified and as directed. |
| 112 | S & F Socket Outlet, Modular Type, Two Modules, Multipurpose, 3 Pin, 16 Amps and 3 Pin, 6 Amps, 230 Volts complete all as specified and as directed. |
| 113 | S & F Electronic Fan Regulator, Stepped Type, Modular Type, Two Module, 120 W, AC, 230 Volts, Single Pole complete all as specified and as directed. |
| 114 | S & F Ceiling Rose, Surface Bakelite, 65 x 50 mm, Three Terminals, 230 Volts complete all as specified and as directed. |
| 115 | Taking down carefully submain wiring of any description complete including wooden battens / conduits / casing capping and making good the disturbed surfaces all as per existing complete all as specified and as directed. |
| 116 | Sub main wiring with 2 runs of single core 6 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 25 mm dia with all accessoriesconcealed in Walls / Roofs / Floors / Ceiling etc. including One run of 6 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor complete all as specified. Note: 3 runs of 6 Sq.mm & one run of 25mm dia PVC Conduit will be measured as one unitcomplete all as specified and as directed. |
| 117 | Sub main wiring with 2 runs of single core 4 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 25 mm dia with all accessoriesconcealed in Walls / Roofs / Floors / Ceiling etc. including One run of 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor complete all as specified. Note: 3 runs of 4 Sq.mm & one run of 25mm dia PVC Conduit will be measured as one unit complete all as specified and as directed. |
| 118 | Sub main wiring with 2 runs of single core 2.5 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 25/20 mm dia with all accessoriesconcealed in Walls / Roofs / Floors / Ceiling etc. including One run of 2.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor for building security lights complete all as specified. Note: 3 runs of 2.5 Sq.mm & one run of 25/20mm dia PVC Conduit will be measured as one unit complete all as specified and as directed. |
| 119 | S & F in repairs SP & N Sheet Metal Enclosure with 2 Pole and Earth Metal Plug & Socket for incorporating SP MCB complete including One MCB, SP, 20 Amps, 240 Volts complete all as specified and as directed. |
| 120 | S & FMCCB DB, TPN, 4 Way, 415 Volts, Vertical, with DIN Channel, Double Door with 200 Amps rated bus bar suitable for mounting MCBscomplete all as specified and as directed. |
| 121 | S & F MCB DB, SPN, 12 Way, 240Volts,with DIN Channel, Double Door with 200 Amps rated bus bar suitable for mounting MCBs complete all as specified and as directed. |
| 122 | S & FMCB DB, SPN, 4 Way, 240Volts,with DIN Channel, Double Door with 200 Amps rated bus bar suitable for mounting MCBs complete all as specified and as directed. |
| 123 | S & F MCCB, TPN,63 Amps, 415V, 16KA complete including taking down unserviceable isolatorcomplete all as specified and as directed. |
| 124 | S & F in repairs Isolator, SPN, 40 Amps, 10 KA, 230 Volts, 50Hz,B curvecomplete including taking down unserviceable isolator complete all as specified and as directed. |
| 125 | MCB, SP, 6 to 40 Amps, 10 KA, AC, 230 Volts, 50 Hz, B Curve complete including taking down unserviceable isolator complete all as specified and as directed. |
| 126 | Taking down & refixing ceiling fans /exhaust fan after completion of B/R work complete including Painting, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. including writing MES No. etc complete all as specified and as directed. |
| 127 | Supply and fixing LED lights fitting 10W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rosecomplete all as specified and as directed. |
| 128 | Removing and re-fixing LED fitting and fixture ofany type and any capacity, keeping in safe custody and refixing the same after necessary B/R and ceiling work including replacing of clamps, twin core wire complete all as specified and as directed. |
| 129 | S&F 30 Watt LED building security light fitting having minimum 110 luminus/Watt efficiency with IP 65 and 4 KV inbuilt surge protection, complete with pressure die cast housing with epoxy power coated dark graphite grey colour finish. Prismatic polycarbonate cover with individual LED lenses, lumanire. 2 core 1.5 Sq mm copper conductor shall use to connect LED light to existing ceiling rose/junction box through GI bracket and flexible PVC pipe with all accessories complete all as specified and as directed.(Note :- GI Bracket shall be paid seperatley.) |
| 130 | S&F GI pipe 40 mm bore , medium grade, duly bend to shape 1.2 m long mounting bracket, fixing clamps bolts, nuts of suitable size etccomplete all as specified and as directed. |
| 131 | S&F Cable Junction of size93 x 93 x 62 Boxes IP 66/69“halogen free and weather proof” for 2.5 sq.mm cable for outdoor installation ( with same company metric knockouts for cable entry and terminal)complete all as specified and as directed.Make : Hensel Model : KF 0202 G |
| 132 | M & L for taking down existing electric geysers of any type and capacity including dismantling the spares and cleaning, servicing the geyser by descaling inner body of water tank and cleaning it with soap and acid mixed water, brazing or welding of tank as required andreassembling the geyser set and refixing the same in original position including checking for proper functioncomplete all as specified and as directed. |
| 133 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louverscomplete all as specified and as directed. |
| 134 | Supply and fix exhaust fan louver suitable for 300mm size exhaust fan complete with nuts and bolts complete all as specified and as directed. |
| 135 | M & L for demolition of brick work for fixing of 300mm sweep exhaust fan and making ofproper circular shape and finishing with internal rendering of 1:6 cement mix complete all as specified and as directed. |
| 136 | S&F CRCA sheet box encloser flushed to the wall for fixing TPN MCCB DB with hinged door & locking mechanism complete all as specified and as directed with necessary welding complete as required complete all as specified and as directed. |
| 137 | Earthing complete with Galvanised Steel Earth Plate Electrode 600 X 600 X 6 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of Plate not less than 1.50 m below normal ground level connected to 32 X 6mm GI Strip [Earth Lead] and GI pipe 50 mm, Medium Grade for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the Plate by means of GI Bolts & Nuts complete all as per Electrical Plate No. 3 of SSR Part – I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. complete all as specified and as directed. |
| 138 | Supply, installing & Testing Electric Water heater(Geyser) storage type of capacity 25 liters, steel body with copper inner tank and heating element upto 02 KW capacity, glass lined coated inner tank, suitable installation with grouting of Nuts, Bolts and washers of suitable size as recommend by the manufacturer including 02 KW heating element, cable of suitable size as recommended by manufacturer,with 3 pin plug Top of suitable capacity,BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etcetc complete all as specified and as directed. |
| 139 | Supply and lay 3 layer ( inner antimicrobial, outer UV stabilized) ISI marked ,IS-15801, PP-R pipes SDR 11 (PN-10) and PP-R plain fittings in trenches/walls/cellings or laying in floors complete of size outer dia 50mm including all fittings including taking underviceable pipe line complete all as specified and as directed. |
| 140 | Supply and lay 3 layer ( inner antimicrobial, outer UV stabilized) ISI marked ,IS-15801, PP-R pipes SDR 11 (PN-10) and PP-R plain fittings in trenches/ walls/ cellings or laying in floors complete of size outer dia 32 mm including all fittings including taking underviceable pipe line complete all as specified and as directed. |
| 141 | Supply and fix PPR Gate Valves (Brass Insert) of 32 mm bore complete all as specified and as directed. |
| 142 | Excavation in trenches n.exc 1.5M wide and n.exc 1.5m in depth for taking out U/G cable, foundation of pole/stay as insoft/loose soft complete all as specified and as directed. |
| 143 | Returning filling in soft/loose soil including spreading, leveling, watering and well ramming in layers n.exc 25cm complete all as specified and as directed. |
| 144 | Removing excavated material n.exc 50m and depositingwhere directed at a level n.exc 1.5m above the starting point complete all as specified and as directed. |
| 145 | Supply and lay cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armored, electric power cables (heavy duty 1100 Volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 Core complete all as specified and as directed. |
| 146 | M&L Sand cushioning 8cm below and 15cm above the U/Gcable for protection of cable with approved sand complete all as specified and as directed. |
| 147 | Supply & laying sub class, ‘B’ bricks in layers perpendicular to the axis of U/G cable for protection of cable complete all as specified and as directed. |
| 148 | M&L for laying 40 mm bore GI pipe, light grade with all fittings, in crossing road/path and in pole up to junction box including necessary clamping etc. complete all as specified and as directed. |
