Tender For Upgradation Of Bldg No. Ph-03 In Yos Mess At Afs Bidar; Taking down chowkats or frames exceeding 1.5 sqm and not exceeding 4.0 sqm each but with shutters (without taking off shutters from the frame), complete all as specified and as directed. 3 Taking down chowkats or frames not exceeding 1.5 sqm each with shutters (without taking off shutters from the frame), complete all as specified and as directed. 4 Dismantling floor, hearth or wall tiling including cement mortar bedding and removal of debris out of premises, completeall as specified and directed. 5 Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for sub base for floor tiles, roof /Khaja padding including removal of debris outside MD land, complete all as specified and as directed. 6 Demolition of brickwork or stone/ PCC block masonry, built in cement mortar or cement lime mortar complete all as specified anddirected. 7 Supply and Fixing 30 mm thick flush door shutters, solid core construction, with particle board coreand ply wood face panels, commercial type on both sides complete all as specified and as directed. 8 Material and Labour Second class hardwood glazed and Skelton shutters 30mm thick, open rebated and prepared to receive glass, gauze etc with sash bar any number fitted with cut and mitered beads for securing glass gauze etc, sizes of members of shutters as specified in SSR Part I section 8, Section 8.24(a) and fitted to chowkats, complete all as specified and as directed. 9 Material and labour for PCC 1:3:6 type C-0 (12.50 mm graded aggregate) for filling back of chowkats, etc complete all as specified and as directed. 10 Material and labour, for Pre-cast cement concrete block masonry with grade ‘C’solid blocks exceeding 10 cm in width, having minimum compressive strength of 50 Kg / Sq cm as per IS 2185 (Part- I) 2005 and set in CM 1:6 complete all as specified and as directed. 11 Material and labour, for Pre-cast cement concrete block masonry with grade ‘C’solid blocks not exceeding 10 cm in width, having minimum compressive strength of 50 Kg / Sq cm as per IS 2185 (Part- I) 2005 and set in CM 1:4 complete all as specified and as directed. 12 Material and Labour Rendering 15mm thick on brick work or concrete surface in CM 1:3 and finishing surfaces fair and even, complete all as specified and as directed. 13 Supply and Fixing Anodised aluminium frame powder coating (minimum thickness of powder coating not less than 15 micron), side hung/sliding type for doors, windows, ventilators, partitions with one or more rebates including jointing cleat for fixing etc., complete all as specified and as directed. 14 Supply and Fixing Anodised aluminium window and ventilator shutters powder coating (minimum thickness of powder coating not less than 15 micron), side hung/sliding type without sash bars, aluminium sections weighing not exceeding 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws anodised aluminium fittings and locking with suitable metal body concealed lock of any colours,complete all as specified and as directed.(Note :- 5 mm thick tinted or frosted glass and wire cloth shall be measured separately and cost of labour charges deemed to be included in unit rate.) 15 Material and Labour for tintedglass 10 mm thick of any colours and glazing with oil putty or glazing clips etc in square or rectangular fixed with silicon or adhesives as in shelves, wardrobes, cupboards, complete all as specified and as directed. 16 Material and Labour for tintedglass 5 mm thick of any colours and glazing with oil putty or glazing clips etc in square or rectangular fixed with aluminium window/ ventilator shutters complete all as specified and as directed. 17 Supply and Fixing Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with stainless steel wire staples/beads to Aluminium or Steel frame, complete all as specified and as directed. 18 Material and labour for mild steel framed work such as window grill, guard bar etcsimilarwork confirming to Fe 290 Grade -E - 165 complete all as specified and as directed. 19 Material and Labourfor 18/19mm thick Plywood, grade BWP type BB fixed with screws to timber frame complete all as specified and as directed. 20 Supply and fixingfor1mm thick laminated mica glossy finishes in any colour,fixed with adhesive materialfor shutters of ward robes, cabinets, wall panelling etc complete all as specified and as directed. 21 M&L, two coat of synthetic enamel paint over a coat of red oxide primer on newsteel surfaces including preparation, of any description, n exceeding10 cm width or girth. 22 M&L 25 mm thick plain cement concrete Type B-0, 1:2:4 (12.5 mm graded aggregate)as in flooring for laying tiles, completeall as specified and directed. 23 M&L anti skid coloured ceramic tiles 7 to 8 mm thickarea of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set with spacer, joints of more than 3mm are grouted with epoxy grout in any colour to match the tiles including 15 mm thick screed bed in CM 1:6, completeall as specified and directed. 24 M&L anti skid coloured ceramic tiles 7 to 8 mm thickarea of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set with spacer, joints of more than 3mm are grouted with epoxy grout and pointed in white or coloured cement to match the tiles including 15 mm thick screed bed in CM 1:6, completeall as specified and directed. 25 S&F Glazed ceramic colouredtiles in vertical surface 450x 300x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles as in skirting/dado including matching PVC corner beading over and 10mm thick rendering in CM 1:4.etc,, completeall as specified and directed. 26 Supply & Fixing of 18- 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms including edge moulding, machine polish to edge as required and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and as directed. 27 S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with Mild Steel Square tube, suppling & fixing in opening as per specification & drawing, completeall as specified and directed. 28 S&F Factory made solid panel PVC doorshutter 30 mm thick (style), both side pre-laminated consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, completeall as specified and directed. 29 S&F Butt Hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised 100 mm long complete all as specified. 30 S&F Aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and as directed. 31 S&F Aluminium anodised bow handle fabricated type extruded section of 150mm long complete all as directed 32 S&F 300mm aluminium alloy, anodized, sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and as directed. 33 Supply and Fixing in repairsstainless steel 25mm dia Curtain rods with finial supports etc, with wall thickness not less than 1.20 mm, complete all as specified and directed . 34 Supply and fix in repairs 25mmdia chromium plated fancy type decorated approved design brackets with end sockets to hold the curtain rod properlycomplete all as specified and as directed. 35 Supply and Fixing in repairs brasspeg set of six with screws complete all as specified and as directed. (Make: Parrywareor Techno commercial equivalent of approved makes specified here-in-after) 36 Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, rectangular/square pipes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and as directed. 37 Taking down steel tubing 15mm bore and connections, including cleaning for refixing all as specified and directed. 38 S&F GI tubes medium grade with all fittings and fixed complete to walls and ceiling or laid in floors, 15mm dia bore all as specified and directed 39 Taking down steel tubing 20mm bore and connections, including cleaning for refixing all as specified and directed. 40 S&F GI tubes medium grade with all fittings and fixed complete to walls and ceiling or laid in floors, 20mm dia bore all as specified and directed. 41 Taking down steel tubing 25mm bore and connections, including cleaning for refixing all as specified and directed. 42 S&F in GI tubes medium grade with all fittings and fixed complete to walls and ceiling or laid in floors, 25mm dia bore all as specified and directed. 43 Supply and Fixing in repairs Wash basin oval shape counter top of size 555x450x205mm in any colouredincluding 32mm bore CP Waste coupling and PVC connection pipe of 15mm x 450mm long completeall as specified and as directed.(Make : Parryware CAT No C0407 or Techno commercial equivalent of approved makes specified here-in-after) 44 Supply & Fixing in Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum),with grating and union for discharge pipe including32mm bore PTMT Waste coupling and PVC connection pipe of 15mm x 450mm long, complete all as specified and as directed. 45 Supply & Fixing in PVC waste pipe 32mm bore for WHB/Sink/Urinal, complete all as specified and as directed. 46 S&F in bevelled edge mirror 600x450mm of selected quality glass mounted on 6mm AC building board of commercial plywood and fixed to wooden plug with chromium plated all as specified and directed 47 Supply and Fixing in repairs Vitreous China white colour One Piece Closet of size 515x345x355mm with integrated cistern, soft close seat cover and twin flush fittings with P or S Trap complete all as required. Make: Parryware CAT No. C8650 (P-180) or Techno commercial equivalent of approved makes specified here-in-after. 48 Supply and Fixing in repairs 15mm bore chromium plated cast copper alloy Bib taps fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make: Parryware CAT No. G0204A1or Techno commercial equivalent of approved makes specified here-in-after 49 Supply and Fixing in repairs 15mm bore stop valves/angle cock, chromium plated fancy type,screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions all as directed. (Make: Parryware CAT No. G0253A1or Techno commercial equivalent of approved makes specified here-in-after) 50 Supply and Fixing in repairs 15mm bore CP 2- Way bib cock double handle with wall flanges, glossy finish complete all as specified and as directed. Make : Parryware CAT No G021ZA1 or Techno commercial equivalent of approved makes specified here-in-after. 51 Supply and Fixing in repairs Brass CP Health Faucet with 1 m SS Chrome plated tube & hookcomplete all as specified and directed. Make : Parryware CAT No T9805A1 or Techno commercial equivalent of approved makes specified here-in-after. 52 Supply and Fixing in repairs 15mm bore swan neck Pillar taps, cast copper alloy fancy type with capstan heads, chromium plated screw down high pressure, screwed for iron pipe all as directed.Make : Parryware CAT No G1903A1 or Techno commercial equivalent of approved makes specified here-in-after. 53 Supply and Fixing in repairstubular towel rail 20mm dia D type 60cm long between flanges chromium plated all as specified and directed.(Make: Parryware CAT No. T5901A1or Techno commercial equivalent of approved makes specified here-in-after) 54 Supply and Fixing in repairsBrass Towel ring Complete all as specified and directed.(Make: Parryware CAT No. T5902A1or Techno commercial equivalent of approved makes specified here-in-after) 55 Supply and Fixing in repairs SS grating 100mm dia complete all as specified and as directed. (Make:Parrywareor Techno commercial equivalent of approved makes specified here-in-after) 56 Supply and Fixing in repairs Toilet paper Holder with Cover of chromium plated complete all as specified and as directed.(Make: Parryware CAT No. T5914A1or Techno commercial equivalent of approved makes specified here-in-after) 57 Supply and Fixing in repairs Soap dispenser with pump action complete all as specified and as directed.(Make: Parryware CAT No. T6513A1or Techno commercial equivalent of approved makes specified here-in-after) 58 Supply and Fixing in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 500cm long and 125cm wide with chromium plated bracket guard and railing complete all as specified and as directed.Make: Parryware CAT No. T6009A1or Techno commercial equivalent of approved makes specified here-in-after 59 Supply and Fixing, double layered Rotational moulded polyethene water storage tanks 1000 lit capacity (cylindrical verticalwith closed top) hoisted and fixed in position all as specified in SSR part-I including dismantling of existing water tank, and providing 20mm bore Gun-metal, globe or gate valves, with iron wheel head, 20mm brass ball valves, 20mm dia tank nipple complete all as specified and as directed. 60 M&L in repairs PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement etc, fixed in repair, complete all as specified and as directed. 61 Supply and Fixing in repairs 110mm dia PVC (SWR) pipes, type B, single socketed, in any length with rubber joints fixed to walls etc. complete all as specified and as directed. 62 Supply and Fixing in repairs 75 mm dia PVC (SWR) pipes, type B, single socketed, in any length with rubber joints fixed to walls etc. complete all as specified and as directed. 63 S&F in repairs PVC (SWR) bends 110mm dia any radiuswith access door, complete all as specified and as directed. 64 S&F in repairs PVC (SWR) bends 75 mm dia any radius with access door, complete all as specified and as directed. 65 S&F in repairs PVC (SWR) junction single, (Single T) 110mm dia equal or unequalwith access door, complete all as specified and as directed. 66 S&F in repairs PVC (SWR) junction single, (Single T) 75mm dia equal or unequalwith access door, complete all as specified and as directed. 67 S&F in repairs PVC (SWR) branch piece, (Single Y) 110mm dia equal or unequalwith access door, complete all as specified and as directed. 68 S&F in repairs PVC (SWR) branch piece, (Single Y) 75mm dia equal or unequalwith access door, complete all as specified and as directed. 69 M&L for Preparation of New plastered surface of wall and applying 2mm thick wall care puttyand applying twocoats of oil bound distemper over one coat of alkali resistant priming paint, complete all as specified and as directed. 70 Material & Labour for Applying 2mm thick wallcare putty on wall or ceiling, complete all as specified and as directed. 71 Complete removal of existing treatment and preparation of surface, providing material and labour for, applying 1mm thick wall care putty on wall surfaces, over a primer coat on old surface of walls and applying two coats of distemper oil bound, complete all as specified and as directed. 72 Complete removal of existing treatment on wall surface and applying Acrylic Smooth exterior paint of required shade in two coats applied over priming coat of exterior primer applied as per manufacturer instructions,complete all as specified and as directed. 73 Complete removal of existing treatment of ceilings and applying twocoats ofoil bound distemper over one coat of alkali resistant priming paint, complete all as specified and as directed. 74 Preparation of new plastered surface on ceiling in height and of any description and applying two coat of oil bound distemper over a alkali resistant priming coat, complete all as specified and as directed. 75 Preparation of Old painted surface of Steel of any description and applying one coat of synthetic enamel paint over 10cm width or girth complete all as specified and as directed. 76 Material & Labour Plain cement concrete 75mm thick Type C2 1:3:6 (20 mm graded stone aggregate) in Plinth protection including filling with sealing compound grade A in joints, complete all as specified and as directed. 77 Surface excavation not exceeding 30 cm depth and average 15 cm deep in hard/dense soil, complete all as specified and as directed. 78 M&L for hard core of broken stone broken to gauge not exceeding 63 mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface, complete all as specified and as directed. 79 Material & Labour for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade with grey cement and pigment etc, complete all as specified and as directed. 80 Material & Labour for 75mm thick for plain cement concrete type D-2, 1:4:8 20 mm graded aggregate as in sub base of floor and path, complete all as specified and as directed. 81 Material & Labour for sand or stone dust cushioning under floors or in foundations including watering and consolidation complete all as specified and directed. 82 Material and Labour for, rendering 15mm thick on fair faces of brick work/concrete surfaces with cement mortar 1:4 finished even and smooth with out using extra cement, complete all as specified and as directed. 83 Material and Labour for, rendering 5 mm thick cement plaster on faces of brick work or concrete surfaces with cement mortar (1:3)as in ceiling finished even and fair without using extra cement all as specified and directed. 84 S & F Anodized aluminiumsnap grid, False ceiling frame work of size 605mm x 605mm, fixed with screws /staples at any height, complete all as specified and directed. 85 S & F 12mm thick, Mineral fibre board/tiles of any size, fixed in ceiling at any height, flat or sloping, complete all as specified and as directed 86 Material and labour for 12mm thick plaster of Paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh, box or any pattern (Fillets, metal frame work and G.I. wire mesh paid separately), complete all as specified and as directed 87 Supply and fixing Galvanized iron frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal changes of 20 and 30mm web of 27mm fixed surrounding wall using nylon sleeves and web of 45mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with Galvanized iron cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, including hangers 6 mm dia. G.I (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5 mm dia 40 mm long, box or any pattern complete all as specified and as directed. 88 Supply and Fixing in repairs Stainless steel sinkmade out of 1.00mm thick sheet for kitchen with plug, washers, waste pipe,connecting union overall size 535mm x 460mm with bowl size 460mm x 406mm x 229mm including 32mm bore PTMT Waste coupling, fixing on kitchen platform with suitable arrangements in cement mortar on to dwarf wall or fixing cantilever brackets complete all as specified and as directed. (Make : Prayag CAT No H826-DD or Techno commercial equivalent of approved makes specified here-in-after.) 89 Taking down carefully existing copper/ aluminium point wiring (Light/ fan/ socket/ bell/ power point) complete with all accessories such as switch with sheet, ceiling rose including rusted/ broken conduit, junction and sunken boxes etc and removing dismantled material and making good disturbed surface of walls/ floors etc matching with existing surface complete all as specified and as directed by Engineer-in-charge. 90 Taking down carefully existing copper/ aluminium point wiring (Light/ fan/ socket points) complete with all accessories such as switch with sheet, ceiling rose including rusted/ broken concealed sunken boxes etc but except concealed conduit and junction boxes and removing dismantled material and making good disturbed surface of walls/ floors etc matching with existing surface complete all as specified and as directed by Engineer-in-charge. 91 Material and labour for Concealed Point wiring for one light point/ fan point/ bell point controlled by one switch (using red, black and green colour wires as colour coding) complete with 1.5 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) drawn through and including PVC conduit 20mm dia (medium duty, ISI marked) with all fittings and all accessories i.e. pipe bend, pipe hook, elbow, junction boxes, 2mm thick galvanised steel pressed sunken box suitable for modular switch socket (Min 60mm deep, suitable length) concealed in wall, including inner and outer plates (cover plate) suitable for fixing the modular PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. including cutting chases in wall and making good disturbed surfaces of walls/ ceilings/ floors etc. by using CM (1:3) complete all as specified and as directed. Note:- Switches / sockets / fan regulators shall be measured and paid for separately under appropriate item of BOQ 92 All as per Serial item No 90 here-in-above, but for one socket outlet 5 Amps point controlled by one switch (on same board) complete all as specified and as directed by Engineer-in-charge. 93 All as per Serial item No 90 here-in-above, but for one socket outlet 5 Amps point controlled by one switch (on independent board and not below the any other switch board) complete all as specified and as directed by Engineer-in-charge. 94 All as per Serial item No 90 here-in-above, but for 15 Amps socket outlet with 2.5 Sqmm Copper including 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified. 95 All as per Serial item No 90 here-in-above, but for 15 Amps socket outlet with 4 Sqmm Copper including 4 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified. 96 Material and labour for Concealed Point wiring for one light point/ fan point/ bell point controlled by one switch (using red, black and green colour wires as colour coding) complete with 1.5 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) drawn through existing PVC conduit but including 2mm thick galvanised steel pressed sunken box suitable for modular switch socket (Min 60mm deep, suitable length) concealed in wall, including inner and outer plates (cover plate) suitable for fixing the modular switches/ socket/ regulator etc, including provision of 1.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. complete all as specified and as directed.Notes: -i) Switches / sockets / fan regulator shall be measured and paid for separately under appropriate item of BOQ). ii) Wherever it is not feasible to draw cablethrough existing PVC conduit (for ceiling fan point only) due to blocked, casing caping shall be provided by contractor without any extra cost, cost for the same shall deemed to be included in the quoted unit rate. 97 S & F of modular switch, one way 6 Amps, 1 module with all accessories complete all as specified and as directed. 98 S & F of modular switch, one way 16 Amps, 1 module with all accessories complete all as specified and as directed. 99 S & F of modular socket, 6 Amps, 2/3 pin combined 2 module with all accessories complete all as specified and as directed. 100 S & F of modular socket, 6/16 Amps, 2/3 pin combined 2 module with all accessories complete all as specified and as directed. 101 M & L Modular type Batten lamp holder, Modular type PVC/ Polycarbonate type with back plate including provision of LED bulb 12 Watt capacity suitable for batten fittings complete. 102 M & L Ceiling rose 3 terminals/ phase type, fabricated of PVC/ Polycarbonate, isolated body complete. 103 M & L for point wiring with Television Co-axial cable in and including concealed PVC conduit (25 mm dia) and conduit accessories and metal flush box of one module with cover fixed with screw and cap washers for Television point and making good all disturbed work to match the existing and all as specified and directed. 104 M & L for modular type TV socket 105 M & L for submain wiring comprising single core, 2 runs of 6 sqmm nominal cross sectional area multi stranded copper conductor cable, PVC insulated unsheathed 1100 volts grade drawing in and including appropriate dia. In existing surface/ recessed PVC conduit and its fittings complete including provision of 1 run of 6 Sqmm nominal cross sectional area multi stranded copper conductor cable, PVC insulated unsheathed 1100 volts grade as earth wire and using colour code as per IS and specified and making good all disturbed work to match the existing complete including taking down old UNSV sub main complete all as specified and directed by Engr-In-charge.Note :- i) 3 runs of 6 sq mm cable and one run of PVC conduit shall be considered as 1 for measurement and payment purpose.ii) Extra length of cables/ wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly 106 M & L for submain wiring comprising single core, 2 runs of 4 sqmm nominal cross sectional area multi stranded copper conductor cable, PVC insulated unsheathed 1100 volts grade drawing in and including appropriate dia. In existing surface/ recessed PVC conduit and its fittings complete including provision of 1 run of 4 Sqmm nominal cross sectional area multi stranded copper conductor cable, PVC insulated unsheathed 1100 volts grade as earth wire and using colour code as per IS and specified and making good all disturbed work to match the existing complete including taking down old UNSV sub main complete all as specified and directed by Engr-In-charge.Note :- i) 3 runs of 4 sq mm cable and one run of PVC conduit shall be considered as 1 for measurement and payment purpose.ii) Extra length of cables/ wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly 107 M & L cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed wiring etc, and making good, cutting not exceeding 10 cm girth in brick walls complete all as specified. 108 M & L for LED tube light fitting of LED T5 tube lights (6500K) environmental friendly energy efficient of 20 Watt LED 230 volt, ACA decorative box type with driver, holder including LED tube light electric connection with PVC copper flexible twin core cable, 1.0 Sqmm from ceiling rose to light fitting complete all as specified. 109 S & F LED street light luminaire 35 Watts with IP66 complete with pressure dia cast aluminium housing with GI pipe bracket made out of 25mm dia medium grade pipe (60 cm long) bend to shape including fixing arrangement to wall with MS flat 25x3mm 2Nos by nut, bolts and washers including electric connection with PVC copper flexible twin core cable 1.0 Sqmm from ceiling rose to light fitting complete all as specified. 110 M & L for LED light fitting mirror type with high out put diffuser 2 feet, 10 Watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. 111 S & F LED light fitting recess/ surface mounted2 x 2 size flat panel of capacity 36 watt made of CRCA sheet steel housing duly powder coated with high efficient PMMA diffuser soft glare free light complete with drivers, holder, LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete, IP20 including taking down old U/s one complete all as specified and directed. 112 S & F decorative type wall mounted LED surface spot light fitting for wall frame/ photo illumination of capacity 10 watt of suitable size complete all as specified. 113 Supply and fix, MCB DB SPN 8 way (Horizontal), double door with Sheet metal enclosure (ISI marked), flush mounted, prewired, 240 V, AC, 50 Hz, Factory made, powder coated,IP-54 protection conforming to IS-13032 universal mounting with 200 Amps rated copper bus bar, neutral link, earth link, earthing studs, detachable gland plates with knockouts on both sides, etc complete all as specified and as directed. Notes :i) All unused modules shall be provided with blanking plate for which the cost is deemed to be included in the cost of MCB DBs.ii) MCB/ Isolators will be measured and paid separately as supply and fix under respective items. 114 Supply and fix, MCB DB TPN 4 way (Horizontal), double door with Sheet metal enclosure (ISI marked), flush mounted, prewired, 240 V, AC, 50 Hz, Factory made, powder coated,IP-54 protection conforming to IS-13032 universal mounting with 200 Amps rated copper bus bar, neutral link, earth link, earthing studs, detachable gland plates with knockouts on both sides, etc complete all as specified and as directed. Notes :i) All unused modules shall be provided with blanking plate for which the cost is deemed to be included in the cost of MCB DBs.ii) MCB/ Isolators will be measured and paid separately as supply and fix under respective items. 115 S & F Protector and accessories for AC starter 25 A, 2 Module grouted flush to walls complete all as specified. 116 S & F Miniature Circuit Breaker (MCB), Single pole, 240 Volts, of 6-32 Amps current rating and 10 KA breaking capacity, B series type complete all as specified. 117 S & F Miniature Circuit Breaker (MCB), Isolator TPN 4pole, 415 Volts, of 63 Amps current rating and 16 KA breaking capacity, B series type complete all as specified. 118 S & F Isolator, Double pole, 240 Volts, of 40 Amps current rating complete all as specified. 119 M & L for Earthing complete with GI earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground vertically to depth of not less than 2.25 m deep below normal ground level with top edge of the plate not less than 1.5 m below ground level connected to GI wire of 4mm dia earth lead by means of bolts, nuts, check nuts, washers of Galvanised iron as steel, protected by Galvanised iron pipe 40mm bore (Medium grade) all as directed including cement concrete (1:3:6) type C-1 earth pit with precast RCC (1:1.5:3) type A-1 cover slab of size 42 x 42 x 10 cm thick reinforced with 8mm dia TMT bars @ 15 cm C/C both ways with 10mm dia mild steel round bar of 30 cm long, bent to shapeas lifting handle, funnel, wire mesh, 20 mm bore galvanized iron pipe (medium grade) for watering, earth testing point, charcoal or coke and salt in alternate layers with necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR Part 1 including testing on completion all complete as specified and directed after taking down old Earthing. (GI wire up to 7.5m including testing consider in this item)
